Search

Polyester‐based electrolytes formed via in situ polymerization, have been regarded as one of the most promising solid electrolyte systems. Nevertheless, it is still a great challenge to address the issue of their high reactivity with metallic lithium anode by optimizing the components and properties of solid electrolyte interphase (SEI). Herein, a new class of N‐containing additive, isopropyl nitrate (ISPN) that can be miscible with ester solvents is demonstrated, and a chemically stable and ion‐conductive LiF‐Li3N composite SEI is constructed. In addition, ISPN can induce the formation of anion‐enriched solvation structures and reduces the desolvation barrier of Li+, resulting in fast transport of Li+. With the addition of ISPN, ionic conductivity of the electrolyte has nearly doubled, reaching as high as 5.3 × 10−4 S cm−1. What's more, the LiFePO4 (LFP)|ISPN‐PTA|Li cell exhibits exceptional cycle stability and fast charging capabilities, maintaining stable cycling for 850 cycles at 10 C rate. Even when paired with the high‐voltage cathode, the LiNi0.6Co0.2Mn0.2O2 (NCM622)|ISPN‐PTA|Li cell achieves an impressive capacity retention of 97.59% after 165 cycles at 5 C. This study offers a novel approach for ester‐based polymer electrolytes, paving the way toward the development of stable and high‐energy Li metal battery technologies. [ABSTRACT FROM AUTHOR]

Stable and active Pt electrocatalyst preparation by a modified citrate reduction method and a mechanism analysis of inorganic additives. • Pt with a clean surface were synthesized via a modified citrate reduction method. • NO 2 − ions possibly alter the reaction kinetics of the growth of Pt NPs. • The optimized Pt/CNT demonstrated high mass activity and moderate activity decay. • The maximum power density of the optimized Pt/CNT catalysts at 0.6 V is 744 mW cm−2. Ultra-small and monodispersed Pt nanoparticles (NPs) have been successfully synthesized in polymer electrolyte membrane fuel cells. The process normally involves the use of capping agents, organic species, templates, and substrates and is thus complex. Hence, obtaining Pt NPs with a clean surface is challenging. In this study, a method for preparing stable and highly dispersed Pt NPs with clean surfaces is proposed. The method involves the use of a modified Na 3 C 6 H 5 O 7 reduction process assisted by NaNO 3 stabilization. The specific complexations of NO 2 − ions possibly alter the reaction kinetics and lower the growth rate of Pt NPs by retarding the reduction reaction. The optimized Pt/carbon nanotube (CNT) catalysts exhibit high mass activity and moderate activity decay after 10,000 times of potential cycling compared with commercially available Pt/C catalysts. Then, membrane electrode assemblies based on the resultant catalysts are characterized. The cell performance of 744 mW cm−2 (maximum power density) is achieved after the optimized Pt/CNT catalysts are used in carbon black. [ABSTRACT FROM AUTHOR]