Search

Fuels derived from biomass are renewable as well as environment friendly. In this study, three biomasses viz. husk of areca nut ( Areca catheu), trunks of moj ( Albizzia lucida), and bon bogori ( Ziziphus rugosus) available in North-East region of India were tested as potential biofuel sources. The accentuation of this study was to determine the kinetic parameters using thermogravimetric (TG) technique under air and nitrogen atmosphere. The experiments were carried out within temperature range 300-973 K under air and nitrogen atmosphere at four different heating rates viz. 5, 10, 15, and 20 K min, respectively. The mass losses at different lumps in the TG graphs were estimated. The first-order kinetic parameters such as activation energy and pre-exponential factor were calculated for different reaction zones for all the three biomass samples. Effects of atmosphere on combustion characteristics (e.g., peak temperature, ignition temperature, and reactivity index) of biomasses were also determined in this study. Areca nut husk has highest ignition temperature (526.38 K) and reactivity index (0.21) but moj has highest peak temperature (597.91 K) along with highest activation energy (348.04 kJ mol) and pre-exponential factor (1.12 × 10 min), respectively. [ABSTRACT FROM AUTHOR]

• Dahlia flower is an abundant and low-cost biological resource. • XRF analysis confirmed the presence of useful compounds. • Kinetic and thermodynamic parameters were calculated to understand its pyrolysis behavior. • Pyrolysis experiments were performed in Py-GC–MS at multiple temperatures. • Py-GC–MS analysis confirmed formation of higher amount of hydrocarbons at 550 °C. To explore the bioenergy potential, kinetic and pyrolysis behavior of waste dahlia flowers (DF), model-free methods and Py-GC–MS were used. Kinetic characteristics of DF biomass were estimated by adopting four model-free methods, Kissinger-Akahira-Sunose (KAS), Ozawa-Flynn-Wall (OFW), Friedman, and Distributed Activation Energy (DAEM). Further, functional groups, the presence of mineral matter in DF biomass, and mineral compounds present in the inorganic residue were analyzed using FTIR, EDX, and XRF. Physicochemical analysis results confirmed its bioenergy potential for conversion into renewable fuel and valuable chemicals. The kinetic results of DF biomass showed that activation energy varied with conversion value, and the thermodynamic analysis indicated multiple step pyrolysis. FTIR analysis confirmed the presence of hemicellulose, cellulose, and lignin in biomass. EDX and XRF analysis also revealed the presence of various useful mineral matter, which had a positive effect during pyrolysis. Py-GC–MS results confirmed that at a lower temperature (500 °C), the formation of ester, nitrogen containing compounds and acid were higher, while at higher temperatures (550 °C and 600 °C), the formation of oxygenated compounds were reduced and the production of hydrocarbons and alcohols increased. [ABSTRACT FROM AUTHOR]