Search

STATEMENT OF PROBLEM Which disinfection protocol provides optimal water contact angle and microhardness for computer-aided design and computer-aided manufacturing (CAD-CAM) polymethyl methacrylate (PMMA) materials is unclear. PURPOSE The purpose of this in��vitro study was to evaluate the effect of different disinfection protocols (1% sodium hypochlorite, denture cleanser gel, and effervescent tablet) on the water contact angle and microhardness of different CAD-CAM PMMA denture base materials by comparing them with a heat-polymerized PMMA. MATERIAL AND METHODS Disk-shaped specimens (��10��2 mm) were fabricated from 3 different CAD-CAM PMMAs-AvaDent (AV), Merz M-PM (M-PM), and Polident (Poli)-and a heat-polymerized PMMA (Vynacron) (CV) (n=21). Three disinfection protocols (1% sodium hypochlorite [HC], denture cleanser gel [GEL], an effervescent tablet [TAB]) were applied to simulate 180 days of cleansing. The water contact angle and microhardness of specimens were measured before and after disinfection and compared by using a 2-way ANOVA (��=.05). RESULTS For water contact angle, material (P=.010) and disinfection protocol (P=.002) had a significant effect. The material (P

STATEMENT OF PROBLEM Denture bases machined from prepolymerized materials have become popular. However, information on the effect of simulated brushing and coffee thermocycling (CTC) on their surface roughness and stainability is lacking. PURPOSE The purpose of this in vitro study was to compare the effect of simulated brushing and CTC on the surface roughness (Ra) and stainability of computer-aided design and computer-aided manufacturing (CAD-CAM) denture base materials and a heat-polymerized denture base material. MATERIAL AND METHODS Forty disk-shaped specimens were prepared from 3 CAD-CAM denture base resins (AvaDent, AV; Merz M-PM, M-PM; and Polident d.o.o, Poli) and a heat-polymerized polymethylmethacrylate resin (Promolux, CV) (n=10). Ra values of the specimens were measured by using a noncontact profilometer after conventional polishing. The color coordinates were also measured over a gray background with a spectrophotometer. Specimens were then consecutively subjected to simulated brushing for 20 000 cycles, CTC for 5000 cycles, and another 10 000 brushing cycles. Ra and color coordinates were measured after each interval. Color differences (ΔE00) were calculated by using the CIEDE2000 formula, and the data were analyzed by using 2-way analysis of variance and Tukey honestly significant difference tests (α=0.05). RESULTS The time interval had a significant effect on Ra (P

The hydrolysis of the collagen matrix by metalloproteinases (MMPs) is one of the paradigms that currently arouses most interest due to its close relationship with a decrease in bond strength (BS) and consequent restoration failure. Chlorhexidine 2% has demonstrated its ability to inhibit MMPs’ activity in the permanent dentition, improving the duration of resin–dentine, but there are few studies on deciduous dentition and its possible repercussions. Aim: To determine the influence of 2% chlorhexidine digluconate (CHX) as a dentine pretreatment on the BS of three adhesive systems on primary molars. Methods: 128 primary extracted molars were assigned to eight groups at random. BS in vitro was recorded by micropush-out test, and analyzed by two-way ANOVA. Results: BS values oscillated from 15.01 MPa to 20.41 MPa. There was no statistically relevant variation between the BS total mean of those adhesive groups that had received CHX pretreatment versus those that did not. Adper Prompt L-Pop was the self-etching adhesive with the best BS. Adper Scotchbond 1XT was the total-etch adhesive with the best BS values. Conclusions: Application of 2% chlorhexidine for 60 s as dentine pretreatment did not affect the immediate BS of several adhesive systems used in primary dentition.

Purpose: To evaluate the effect of thermocycling on the water contact angle (WCA), surface roughness (SR), and microhardness (MH) of different CAD-CAM PMMA denture base materials after different surface treatments (conventional laboratory polishing, polishing kit, or surface sealant). Materials and methods: Disk-shaped specimens (10 × 2 mm) of 3 different CAD-CAM PMMAs, AvaDent (AV); Merz M-PM (M-PM); Polident (Poli), and a conventional heat-polymerized PMMA (Vynacron) (CV) (n=21) were divided into 3 different surface treatment groups (n=7): conventional laboratory polishing (CLP), polishing with acrylic resin polisher kit (PK), and a surface sealant (Palaseal) (SSC). Stereomicroscopic images were taken both before and after thermocycling. WCA, SR, and MH of all specimens were measured before and after thermocycling and compared by using a 2-way ANOVA (α=0.05). Results: After thermocycling, WCA significantly increased for CLP- or PK -applied (P

This clinical report describes the treatment of a complex intraoral situation by fabricating a maxillary implant-retained overdenture with a high-performance polymer (polyetherketoneketone) framework and lithium disilicate crowns and mandibular tooth- and implant-supported ceramic restorations. No complications were noted in 2 years, and the patient was satisfied with function and esthetics.

Objective: To assess the clinical and esthetic outcomes and patient satisfaction of screw-retained one-piece implant crowns fabricated with zirconia abutments after a 4.5- to 8.8-year follow-up. Material and methods: Thirty-two patients (12 women and 20 men), who received 40 implant single crowns in anterior and premolar sites, were included in this prospective study. All restorations were based on ceramic hand-veneered customized CAD/CAM zirconia abutments. The follow-up consisted of clinical and radiological examinations. The pink esthetic score-white esthetic score (PES-WES) was used to evaluate the esthetic outcome. Patients' satisfaction was assessed via visual analog scale (VAS). Results: Implant and prosthetic survival rates were 100% and 97.5%, respectively. Mean marginal bone loss was -0.17 mm (SD 1.16 mm). Probing depth was ≤4 mm in 98.7% and 5 mm in 1.3% of the sites; 8.3% of them were bleeding on probing positive. No technical or biological complications were observed except for one abutment fracture. The mean PES-WES scores were 7.0 and 7.1, respectively. VAS scores (10-point) of 9.41 for function and 9.26 for esthetics showed high patient satisfaction. Conclusion: After a mean observation period of 6 years and 7 months, screw-retained implant crowns based on veneered customized CAD/CAM zirconia abutments with conical connection showed very good clinical performance and may be recommended for the replacement of missing anterior and premolar teeth. (ClinicalTrials.gov # NCT04370314). Keywords: all-ceramic restorations; dental implant; implant crowns; one-piece implant crowns; screw-retained implant crowns; survival rate; zirconia abutments.