Search

Background To achieve an optimal clinical outcome in reverse total shoulder arthroplasty (RSA), accurate placement of the components is essential. The recently introduced navigation technology of augmented reality (AR) through head-mounted displays (HMD) offers a promising new approach to visualize the anatomy and navigate component positioning in various orthopedic surgeries. We hypothesized that AR through HMD is feasible, reliable, and accurate for guidewire placement in RSA baseplate positioning. Methods Twelve human cadaver shoulders were scanned with computed tomography (CT) and RSA baseplate positioning was 3-D planned using dedicated software. The shoulders were prepared through a deltopectoral approach and an augmented reality hologram was superimposed using the HMD Microsoft HoloLense. The central guidewire was then navigated through the HMD to achieve the planned entry point and trajectory. Postoperatively, the shoulders were CT-scanned a second time and the deviation from the planning was calculated. Results The mean deviation of the entry point was 3.5 mm ± 1.7 mm (95% CI 2.4 mm; 4.6 mm). The mean deviation of the planned trajectory was 3.8° ± 1.7° (95% CI 2.6°; 4.9°). Conclusion Augmented reality seems feasible and reliable for baseplate guidewire positioning in reverse total shoulder arthroplasty. The achieved values were accurate.

Background Intra-articular fractures are associated with posttraumatic arthritis if inappropriately treated. Exact reduction of the joint congruency is the main factor to avoid the development of arthrosis. Aim of this study was to evaluate feasibility of computer-assisted surgical planning and 3D-printed patient-specific instrumentation (PSI) for treatment of distal intraarticular radius fractures. Method 7 Patients who suffered a distal intraarticular radius fracture were enrolled in this prospective case series. Preoperative CT-scan was recorded, whereupon a 3D model was computed for surgical planning and design of PSI for surgical navigation. Postoperative accuracy and joint congruency were assessed. Patients were followed-up 3, 6 and 12 months postoperatively. Results Mean follow-up was 16 months. Over all range of motion was restored and flexion, extension and pronation showed significant recovery, p p p p p > 0.05 for fragments reduced with ligamentotaxis. Conclusion Computer-assisted and PSI navigated intraarticular radius fracture treatment is feasible, safe and accurate. The benefits of this method, however, do not outstand the additional effort. Level of evidence IV.

Objective To determine potential predictive associations between patient-/lesion-specific factors, clinical outcome and anterior ankle impingement in patients that underwent isolated autologous matrix-induced chondrogenesis (AMIC) for an osteochondral lesion of the talus (OLT). Design Thirty-five patients with a mean age of 34.7 ± 15 years who underwent isolated cartilage repair with AMIC for OLTs were evaluated at a mean follow-up of 4.5 ± 1.9 years. Patients completed AOFAS (American Orthopaedic Foot and Ankle Society) scores at final follow-up, as well as Tegner scores at final follow-up and retrospectively for preinjury and presurgery time points. Pearson correlation and multivariate regression models were used to distinguish associations between patient-/lesion-specific factors, the need for subsequent surgery due to anterior ankle impingement and patient-reported outcomes. Results At final follow-up, AOFAS and Tegner scores averaged 92.6 ± 8.3 and 5.1 ± 1.8, respectively. Both body mass index (BMI) and duration of symptoms were independent predictors for postoperative AOFAS and Δ preinjury to postsurgery Tegner with positive smoking status showing a trend toward worse AOFAS scores, but this did not reach statistical significance ( P = 0.054). Nine patients (25.7%) required subsequent surgery due to anterior ankle impingement. Smoking was the only factor that showed significant correlation with postoperative anterior ankle impingement with an odds ratio of 10.61 when adjusted for BMI and duration of symptoms (95% CI, 1.04-108.57; P = 0.047). Conclusion In particular, patients with normal BMI and chronic symptoms benefit from AMIC for the treatment of OLTs. Conversely, smoking cessation should be considered before AMIC due to the increased risk of subsequent surgery and possibly worse clinical outcome seen in active smokers.

Background Accurate glenoid positioning in reverse total shoulder arthroplasty (RSA) is important to achieve satisfying functional outcome and prosthesis longevity. Optimal component placement can be challenging, especially in severe glenoid deformities. The use of patient-specific instruments (PSI) and 3D computer-assisted optical tracking navigation (NAV) are already established methods to improve surgical precision. Augmented reality technology (AR) promises similar results at low cost and ease of use. With AR, the planned component placement can be superimposed to the surgical situs and shown directly in the operating field using a head mounted display. We introduce a new navigation technique using AR via head mounted display for surgical navigation in this feasibility study, aiming to improve and enhance the surgical planning. Methods 3D surface models of ten human scapulae were printed from computed tomography (CT) data of cadaver scapulae. Guidewire positioning of the central back of the glenoid baseplate was planned with a dedicated computer software. A hologram of the planned guidewire with dynamic navigation was then projected onto the 3D-created models of the cadaver shoulders. The registration of the plan to the anatomy was realized by digitizing the glenoid surface and the base of the coracoid with optical tracking using a fiducial marker. After navigated placement of the central guidewires, another CT imaging was recorded, and the 3D model was superimposed with the preoperative planning to analyze the deviation from the planned and executed central guides trajectory and entry point. Results The mean deviation of the ten placed guidewires from the planned trajectory was 2.7° ± 1.3° (95% CI 1.9°; 3.6°). The mean deviation to the planned entry point of the ten placed guidewires measured 2.3 mm ± 1.1 mm (95% CI 1.5 mm; 3.1 mm). Conclusion AR may be a promising new technology for highly precise surgical execution of 3D preoperative planning in RSA.

Objective To determine the role of magnetic resonance imaging (MRI) MOCART (Magnetic Resonance Observation of Cartilage Repair Tissue) 1 and 2.0 scores in the assessment of postoperative outcome after autologous matrix-induced chondrogenesis (AMIC) for the treatment of osteochondral lesions of the talus (OLTs). It was hypothesized that preoperative patient factors or OLT morphology are associated with postoperative MOCART scores; yet postoperative clinical outcome is not. Study Design Cohort study; Level of evidence, 4. This study evaluated isolated AMIC that were implanted on the talus of 35 patients for the treatment of symptomatic OLT. Tegner and AOFAS (American Orthopaedic Foot and Ankle Society) scores were obtained at an average follow-up of 4.5 ± 1.8 years and postoperative MRI scored according to the MOCART 1 and 2.0. Results OLT size showed significant correlation with postoperative MRI scores (MOCART 1: P = 0.006; MOCART 2.0: P = 0.004). Bone grafting was significantly associated with a MOCART 1 subscale (signal intensity of repair tissue; P = 0.038). Age and defect size showed significant correlations with MOCART 2.0 subscales ( P < 0.05). Patients with shorter follow-up had a significantly higher MOCART 1 score and a trend toward better MOCART 2.0 scores than patients with longer follow-up (64.7 vs. 52.9 months, P = 0.02; 69.4 vs. 60.6 months, P = 0.058). No MOCART score was associated with postoperative patient-reported outcomes (n.s.). Conclusion Osteochondral lesion size is associated with postoperative MOCART scores in patients treated with AMIC for OLTs, with decreasing MOCART scores over time. Yet clinical outcome does not correlate with any MOCART score. Thus, MOCART assessment seems to have no significant role in the postoperative treatment of asymptomatic patients that underwent AMIC for OLTs.

Background:Autologous matrix-induced chondrogenesis (AMIC) has been shown to result in favorable clinical outcomes in patients with osteochondral lesions of the talus (OLTs). Though, the influence of ankle instability on cartilage repair of the ankle has yet to be determined.Purpose/Hypothesis:To compare the clinical and radiographic outcomes in patients with and without concomitant lateral ligament stabilization (LLS) undergoing AMIC for the treatment of OLT. It was hypothesized that the outcomes would be comparable between these patient groups.Study Design:Cohort study; Level of evidence, 3.Methods:Twenty-six patients (13 with and 13 without concomitant ankle instability) who underwent AMIC with a mean follow-up of 4.2 ± 1.5 years were enrolled in this study. Patients were matched 1:1 according to age, body mass index (BMI), lesion size, and follow-up. Postoperative magnetic resonance imaging and Tegner, American Orthopaedic Foot & Ankle Society (AOFAS), and Cumberland Ankle Instability Tool (CAIT) scores were obtained at a minimum follow-up of 2 years. A musculoskeletal radiologist scored all grafts according to the MOCART (magnetic resonance observation of cartilage repair tissue) 1 and MOCART 2.0 scores.Results:The patients’ mean age was 33.4 ± 12.7 years, with a mean BMI of 26.2 ± 3.7. Patients with concomitant LLS showed worse clinical outcome measured by the AOFAS (85.1 ± 14.4 vs 96.3 ± 5.8; P = .034) and Tegner (3.8 ± 1.1 vs 4.4 ± 2.3; P = .012) scores. Postoperative CAIT and AOFAS scores were significantly correlated in patients with concomitant LLS ( r = 0.766; P = .002). A CAIT score >24 (no functional ankle instability) resulted in AOFAS scores comparable with scores in patients with isolated AMIC (90.1 ± 11.6 vs 95.3 ± 6.6; P = .442). No difference was seen between groups regarding MOCART 1 and 2.0 scores ( P = .714 and P = .371, respectively).Conclusion:Concurrently performed AMIC and LLS in patients with OLT and ankle instability resulted in clinical outcomes comparable with isolated AMIC if postoperative ankle stability was achieved. However, residual ankle instability was associated with worse postoperative outcomes, highlighting the need for adequate stabilization of ankle instability in patients with OLT.

Background Legg–Calvé–Perthes (LCP) is a common orthopedic childhood disease that causes a deformity of the femoral head and to an adaptive deformity of the acetabulum. The altered joint biomechanics can result in early joint degeneration that requires total hip arthroplasty. In 2002, Ganz et al. introduced the femoral head reduction osteotomy (FHRO) as a direct joint-preserving treatment. The procedure remains one of the most challenging in hip surgery. Computer-based 3D preoperative planning and patient-specific navigation instruments have been successfully used to reduce technical complexity in other anatomies. The purpose of this study was to report the first results in the treatment of 6 patients to investigate whether our approach is feasible and safe. Methods In this retrospective pilot study, 6 LCP patients were treated with FHRO in multiple centers between May 2017 and June 2019. Based on patient-specific 3D-models of the hips, the surgeries were simulated in a step-wise fashion. Patient-specific instruments tailored for FHRO were designed, 3D-printed and used in the surgeries for navigating the osteotomies. The results were assessed radiographically [diameter index, sphericity index, Stulberg classification, extrusion index, LCE-, Tönnis-, CCD-angle and Shenton line] and the time and costs were recorded. Radiologic values were tested for normal distribution using the Shapiro–Wilk test and for significance using Wilcoxon signed-rank test. Results The sphericity index improved postoperatively by 20% (p = 0.028). The postoperative diameter of the femoral head differed by only 1.8% (p = 0.043) from the contralateral side and Stulberg grading improved from poor coxarthrosis outcome to good outcome (p = 0.026). All patients underwent acetabular reorientation by periacetabular osteotomy. The average time (in minutes) for preliminary analysis, computer simulation and patient-specific instrument design was 63 (±48), 156 (±64) and 105 (±68.5), respectively. Conclusion The clinical feasibility of our approach to FHRO has been demonstrated. The results showed significant improvement compared to the preoperative situation. All operations were performed by experienced surgeons; nevertheless, three complications occurred, showing that FHRO remains one of the most complex hip surgeries even with computer assistance. However, none of the complications were directly related to the simulation or the navigation technique., BMC Musculoskeletal Disorders, 21 (1), ISSN:1471-2474