Search

A reader module at 60 GHz for high data-rate short-range backscattering-based communications is presented. The reader consists of a CMOS-based oscillator, amplifiers, and a mixer on a low-temperature co-fired ceramic (LTCC) substrate. The filter, power splitter, and antennas are directly patterned on the LTCC. All millimeter-wave components are contained within the module and the only interfaces to the module are the IF and bias lines. Transmit power of the module is +\11.6-dBm effective isotropic radiated power with an IF bandwidth of 400 MHz. The LTCC module measures \ 13\times \ 24~\ mm^2 and has a dc power consumption of 130 mW. Reception of a 20-MHz square wave from a tag 5 cm apart from the reader is demonstrated; the suggested millimeter-wave identification concept enables a \10^2–\10^3-fold data-rate increase in comparison to the present near-field communication technique, with similar size, range, and power consumption of the reader. [ABSTRACT FROM AUTHOR]

The relatively high dielectric constant of the low-temperature cofired ceramic (LTCC) substrate materials can reduce the antenna gain and increase the mutual coupling in antenna arrays due to the increased surface-wave power. We present a design of a uniplanar-compact electromagnetic band-gap (UC-EBG) structure on the Ferro A6-S LTCC tape system operating in the 60-GHz frequency band. The UC-EBG design is used with an aperture-coupled microstrip-line-fed patch antenna (ACMPA) and with a 16-element array to increase the antenna gain. The UC-EBG is also used to reduce the mutual coupling between antennas in the Eand H-planes. The performance of the antennas with and without UC-EBG are evaluated with the probe-station and radiation-pattern measurements. In addition, the reflection from the UC-EBG surface is measured using a WR-15 waveguide excitation. Good agreement is achieved between the simulations and the measurements. An increase of up to 4.5 and 2.3 dBi is achieved in the gain for a single element and for a 16-element array, respectively. A reduction of up to 11.8 dB is observed in the E-plane coupling between two patches. The presented design is suitable for electromagnetic shielding, reduction of coupling in integrated LTCC modules, and providing high gain antennas for low-cost millimeter-wave applications. [ABSTRACT FROM AUTHOR]

Abstract-The design is presented of aperture-coupled microstrip line-fed patch antennas (ACMPAs) and 4 × 4 planar arrays on Ferro A6-S low-temperature cofired ceramic (LTCC) substrate operating in the 60-GHz frequency band. In addition to the traditional ACMPA design, air cavities processed inside the LTCC substrate are used to improve the bandwidth and gain of the antennas. The arrays are excited through the microstrip-line feed networks using quarter-wave matched T-junctions and using Wilkinson power dividers. The results show that ACMPAs and arrays can be fabricated with a standard LTCC process even for the millimeter-wave region. Good agreement is achieved between simulations and measurements. The measured S-parameters indicate impedance bandwidths of 9.5% and 5.8% for the array elements with and without an. embedded cavity. The measured maximum gains for the 16-element patch arrays (with and without cavity) are 18.2 and 15.7 dBi, respectively. [ABSTRACT FROM AUTHOR]