Search

With the rise of 5G and beyond, the ever-increasing data-rates demanded by mobile access are severely challenging the capacity of optical fronthaul networks. Despite its high reliability and ease of deployment, legacy digital radio-over-fiber (RoF) technologies face an upcoming bandwidth bottleneck in the short term. This has motivated a renewed interest in the development of analog RoF alternatives, owing to their high spectral efficiency. However, unlike its digital counterpart, analog RoF transmission requires a highly linear transceiver to guarantee signal fidelity. Typical solutions exploited in recent research works tend to adopt the use of bulky benchtop components, such as directly modulated lasers (DML) and photodiodes. Although this provides a convenient and quick path for proof-of-concept demonstrations, there is still a considerable gap between lab developments and commercial deployment. Most importantly, a key question arises: can analog-RoF transceivers meet the 5G requirements while being competitive in terms of cost and footprint? Following this challenge, in this work we exploit the use of a low-cost commercial off-the-shelf (COTS) small form-factor pluggable (SFP) transceiver, originally designed for digital transmission at 1 Gbps, which is properly adapted towards analog RoF transmission. Bypassing the digital electronics circuitry of the SFP, while keeping the original transmitter optical sub-assembly (TOSA) and receiver optical sub-assembly (ROSA), we demonstrate that high-performance 5G-compatible transmission can be performed by reusing the key built-in components of current low-cost SFP-class transceivers. Particularly, we demonstrate error vector magnitude (EVM) performances compatible with 5G 64QAM transmission both at 100MHz and 400MHz. Furthermore, employing a memory polynomial model for digital pre-distortion of the transmitted signal, we achieve 256QAM-compatible performance at 100MHz bandwidth, after 20 km fronthaul transmission.

Towards enabling bandwidth-hungry 5G applications, a Fiber-Wireless (FiWi) mobile fronthaul architecture is experimentally presented supporting the co-existence of spectrally efficient analog transport formats with Digital Radio over Fiber transport schemes, combined with millimeter wave (mmWave) high-capacity wireless channels. Flexible transport network reconfiguration is proposed by means of a low-loss 1 × 4 Si3N4 Reconfigurable Optical Add/Drop Multiplexer (ROADM) on TriPleX platform, selectively dropping four FiWi mmWave fronthaul links to four different antenna location. Detailed investigations of the proposed system are reported, including frequency characterization, multi-stage EVM penalty study and analog/digital traffic coexistence PHY layer feasibility. Following, four 10 Gb/s multi-band 16-QAM WDM FiWi analog IFoF links are transmitted through 10km fiber and 1-m directional V-band antennas and flexibly reconfigured by a Si3N4 ROADM, achieving a record 40 Gb/s wavelength-routed fronthaul capacity for mmWave 5G, while simultaneously meeting multiple 5G Use Cases within 3GPP requirements. [ABSTRACT FROM AUTHOR]

Abstract This article presents an experimental demonstration of a high-capacity millimeter-wave 5G NR signal transmission with analog radio-over-fiber (ARoF) fronthaul over multi-core fiber and full real-time processing. The demonstration validates the core of the blueSPACE fronthaul architecture which combines ARoF fronthaul with space division multiplexing in the optical distribution network to alleviate the fronthaul capacity bottleneck and maintain a centralized radio access network with fully centralized signal processing. The introduction of optical beamforming in the blueSPACE architecture brings true multi-beam transmission and enables full spatial control over the RF signal. The proposed ARoF architecture features a transmitter that generates the ARoF signal and an optical signal carrying a reference local oscillator employed for downconversion at the remote unit from a single RF reference at the central office. A space division multiplexing based radio access network with multi-core fibre allows parallel transport of the uplink ARoF signal and reference local oscillator at the same wavelength over separate cores. A complete description of the real-time signal processing and experimental setup is provided and system performance is evaluated. Transmission of an 800 MHz wide extended 5G NR fronthaul signal over a 7-core fibre is shown with full real-time signal processing, achieving 1.4 Gbit/s with a bit error rate $$

This article presents an experimental demonstration of a high-capacity millimeter-wave 5G NR signal transmission with analog radio-over-fiber (ARoF) fronthaul over multi-core fiber and full real-time processing. The demonstration validates the core of the blueSPACE fronthaul architecture which combines ARoF fronthaul with space division multiplexing in the optical distribution network to alleviate the fronthaul capacity bottleneck and maintain a centralized radio access network with fully centralized signal processing. The introduction of optical beamforming in the blueSPACE architecture brings true multi-beam transmission and enables full spatial control over the RF signal. The proposed ARoF architecture features a transmitter that generates the ARoF signal and an optical signal carrying a reference local oscillator employed for downconversion at the remote unit from a single RF reference at the central office. A space division multiplexing based radio access network with multi-core fibre allows parallel transport of the uplink ARoF signal and reference local oscillator at the same wavelength over separate cores. A complete description of the real-time signal processing and experimental setup is provided and system performance is evaluated. Transmission of an 800 MHz wide extended 5G NR fronthaul signal over a 7-core fibre is shown with full real-time signal processing, achieving 1.4 Gbit/s with a bit error rate < 3.8 × 10 - 3 and thus below the limit for hard-decision forward error correction with 7% overhead. [ABSTRACT FROM AUTHOR]

Towards relieving the bandwidth limitations in 5G mobile fronthaul networks, a Fiber Wireless (FiWi) small cell architecture is presented, relying on spectrally efficient analog transport on intermediate frequency over fiber (IFoF) and a millimeter wave (mmWave) phased array antenna (PAA) interfaced with a low-loss optical add/drop multiplexer (OADM) on Si3N4/SiO2 TriPleX platform with 5 dB fiber-to-fiber losses. Specifically, four 1 Gb/s FiWi links, each carrying a 250 MBd 16-QAM signal on 5.8 GHz IFoF, are wavelength division multiplexed (WDM) and transported across a 10 km Single Mode Fiber (SMF), before being demultiplexed into the constituent channels in the OADM device and subsequently wirelessly transmitted by the PAA over a 1 m-long V-band link with 90° degree beamsteering capability. Featuring 4x 1Gb/s user rate with beamsteering to meet the respective 5G key performance indicator (KPI) for the peak user rate and an EVM within the acceptable 3GPP limit of 12.5%, the current work forms the first centralized FiWi point-to-multipoint small cell architecture with efficient transport scheme on IFoF and ubiquitous 360°-degree coverage for emerging 5G mmWave networks. [ABSTRACT FROM AUTHOR]

The introduction of millimeter wave (mm-wave) frequency bands for cellular communications with significantly larger bandwidths compared to their sub-6 GHz counterparts, the resulting densification of network deployments and the introduction of antenna arrays with beamforming result in major increases in fronthaul capacity required for 5G networks. As a result, a radical re-design of the radio access network is required since traditional fronthaul technologies are not scaleable. In this article the use of analog radio-over-fiber (ARoF) is proposed and demonstrated as a viable alternative which, combined with space division multiplexing in the optical distribution network as well as photonic integration of the required transceivers, shows a path to a scaleable fronthaul solution for 5G. The trade-off between digitized and analog fronthaul is discussed and the ARoF architecture proposed by blueSPACE is introduced. Two options for the generation of ARoF two-tone signals for mm-wave generation via optical heterodyning are discussed in detail, including designs for the implementation in photonic integrated circuits as well as measurements of their phase noise performance. The proposed photonic integrated circuit designs include the use of both InP and SiN platforms for ARoF signal generation and optical beamforming respectively, proposing a joint design that allows for true multi-beam transmission from a single antenna array. Phase noise measurements based on laboratory implementations of ARoF generation based on a Mach–Zehnder modulator with suppressed carrier and with an optical phase-locked loop are presented and the suitability of these transmitters is evaluated though phase noise simulations. Finally, the viability of the proposed ARoF fronthaul architecture for the transport of high-bandwidth mm-wave 5G signals is proven with the successful implementation of a real-time transmission link based on an ARoF baseband unit with full real-time processing of extended 5G new radio signals with 800 MHz bandwidth, achieving transmission over 10 km of 7-core single-mode multi-core fiber and 9 m mm-wave wireless at 25.5 GHz with bit error rates below the limit for a 7% overhead hard decision forward error correction. [ABSTRACT FROM AUTHOR]

This manuscript introduces a 5G radio access network architecture concept based on ultra-dense wavelength division multiplexing (UDWDM) and incorporating an optical fronthaul network that uses a novel wireless antenna system for radio frequency transmission and reception. A ring topology is proposed where optical signals travel within the 5G UDWDM passive optical networks and millimeter waves are generated in the optical line terminals by optical heterodyning. The wireless transmission of the millimeter waves is conducted by an innovative phased array fed reflector antenna approach for mobile communications that grants high antenna gain due to highly focused radiation characteristics, as well as multiplexing gain by multiple beam generation. Furthermore, beam steering is provided by a radio frequency analog beamformer network. Finally, implementation options synthesizing the total system are discussed. [ABSTRACT FROM AUTHOR]