Search

Acoustic emission (AE) released by pine beams retrofitted with fiber reinforced plastic (FRP) and poplar planks in bending is analyzed. Basalt fabric (FB), carbon fabric (FC), and carbon pultruded laminate (LC) have been used as FRP. Experimental results and AE behavior are discussed based on an elastoplastic finite-element numerical model. The model demonstrates a strong strain concentration at the end of poplar planks, which causes high AE activity in these areas and acts as a precursor of the delamination of the poplar plank. Based on the experimental results, some AE criteria for predicting the onset of the delamination are tentatively proposed. © 2020 by the authors.

Cigarette butts are one of the most common waste on the planet and are not biodegradable, so they remain on the landscape for many years. Cigarette butt composition makes it suitable to be added during the manufacture of construction materials, so it can be considered a waste recovery material, helping to reduce the ecological footprint of the construction sector. This article shows the characterization of gypsum composites containing cigarette butt waste. Several gypsum specimens were prepared incorporating different percentages of cigarette butt waste (0.5%, 1.0%, 1.5%, 2.0% and 2.5%). Samples without waste additions were also prepared in order to compare the results obtained. Samples were tested for density, superficial hardness, flexural and compressive strength, bonding strength and acoustic performance. Results show that it is possible to add cigarette butts in a gypsum matrix, resulting in better mechanical behavior than traditional gypsums. © 2020 by the authors.

New energy-efficient materials are increasingly used in architecture and civil engineering today. Many of these are based on the reuse of plants and plant residues from industry and agriculture for the production of bio-sustainable insulation materials, and as aggregates in concretes. This paper presents the results of our study of research into hemp concrete, an emerging material in the green building sector, since it first appeared about twenty-five years ago to the present day. The study centres on a growing bibliography over this period, emphasizing some fundamental parameters of hemp raw materials and related building materials, the binders used in the production of hemp aggregate concretes and assessments of different aspects of their performance. The most important properties of hemp concrete vary according to the quality of the plant aggregates, the choice of binders (typically aerial or hydraulic lime), the proportions of the raw materials and the application techniques. Organic aggregates are less stable than inorganic aggregates and are therefore more difficult to use in a concrete mix with both inorganic and organic binders. Among other reasons, this is due to the disproportionate amount of water required in the mixing of plant-based concretes and to the release of organic compounds, which can have serious effects on the hardening process. This problem was identified in scientific studies on the use of hemp concrete in sustainable, bioclimatic construction, whether applied as a semi-liquid mass or as a precast element. This new biomaterial offers excellent results in terms of its application on site and has important physical properties, such as high durability and easy conservation. This study seeks to provide a useful tool for future research into sustainable building materials, better use of available energy and plant-based resources and more efficient recycling of the waste produced by human activities. © 2020 Elsevier Ltd

The purchase price of any forest plantation depends on the quality of its raw wood, and specifically, variables such as density, orientation of the fibers, bending strength, and bending MoE (Modulus of Elasticity). The elastic waves propagation velocity has become one of the most popular parameters to evaluate the wood in standing trees. This study had two objectives: (1) Show how this velocity is clearly affected by the clone, the location of the crop, and the measurement season of poplar crops; and (2) apply the Akaike information criterion to determinate the arrival time of the waves, on the basis of the entropy of the signals recorded by the piezoelectric sensors placed on the trunk of the tree., This work has been possible due to the financial support of the COMPOP_Timber project “Desarrollo de productos de ingeniería elaborados a base de tablones y chapas de chopo con inserciones de material compuesto para su uso en construcción”, BIA2017-82650-R. The authors thank to Antonio Aguilar and Chihab Abarkane, for his help during measurements in field, and Esther Merlo from MADERAS PLUS, for the analysis of results and methods.