Search

Background Several studies have evaluated the survivorship and clinical outcomes of constrained acetabular liners (CALs) in complex primary and revision total hip arthroplasty with hip instability; however, there remains no consensus on the overall performance of this constrained implant. We therefore performed a systematic review of the literature to examine survivorship and complication rate of CAL usage. Methods A systematic review of the literature in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines was performed. A comprehensive search of PubMed, MEDLINE, EMBASE, and the Cochrane Database of Systematic Reviews was conducted for English articles using various combinations of keywords. Results In all, 37 articles met the inclusion criteria. A total of 4152 CALs were implanted. The all-cause reoperation-free survivorship was 79.9%. The overall complication rate was 22.2%. Dislocation was the most common complications observed and the most frequent reason for reoperation with an incidence of 9.4% and 9.2%, respectively. Infection after CAL placement had an incidence of 4.6%. The reoperation rate for aseptic acetabular component loosening was 2.9%. Overall, patients had improved outcomes as documented by postoperative hip scores. Conclusion CALs usage have a relatively high complication rate, particularly when compared with current bearing alternatives (dual mobility cups and large diameter femoral heads), however, it remains a valuable salvage procedure in complex patients affected by recurrent dislocation and implant instability. Newer designs have shown reduced impingement and higher survivorship free from dislocation. However, CALs should only be used when the reasons of instability have been correctly recognized and optimized.

Purpose Knee instability is considered one of the most frequent cause of failure after primary total knee arthroplasty (TKA). In order to address intraoperative instability, varus-valgus constrained knee implants (VVC) are increasingly utilized in primary TKA. Despite an increased risk of mechanical failure, short to mid-term results seem to be encouraging, but long-term results are still lacking. Methods A systematic review of prospective and retrospective studies that reported clinical outcomes of patients with VVC systems in primary TKAs between 1990 and 2020 was performed. Results In all, 28 articles met our inclusion criteria. A total of 2798 VVC implants were used in primary TKA. The all-cause revision-free survivorship was 95.2% at a mean follow-up of 7 years. Infection and aseptic loosening were the most common reasons for reoperation with an incidence of 1.8% and 1.7%, respectively. Overall complication rate was 9.6%, the most common complications were knee stiffness and infection with an incidence of 2.8% and 2.5%, respectively. Conclusions VVC implants in primary TKA are associated with improved functional outcomes and good mid-term survivorship, comparable to lower level of constraint implants. Non-modular stemless seem to be reliable implants at mid-term follow-up. However, given the lack data coming from long-term studies, VVC implants should be used cautiously in primary TKA.

Introduction Medial Pivot Total Knee Arthroplasty was introduced in clinical practice in 1990s to reproduce the in vivo-natural knee kinematics. This design is characterized by an asymmetric constraint profile, with aa highly congruent medial compartment, and a less congruent lateral compartment. Short-term outcomes of the medial pivot systems in primary knee arthroplasty have been widely reported in the current literature, however, only few studies have described results beyond 5-year follow-up. Objectives The primary objectives of this systematic review of the literature is to analyze the mid-term studies on medial pivot total knee arthroplasty focusing on the reoperation rate, survivorship and clinical outcome scores. Methods The US National Library of Medicine (PubMed/MEDLINE), EMBASE, and the Cochrane Database of Systematic Reviews were queried for publications from January 1980 to December 2019 utilizing the following keywords: “medial pivot”, “medial stabilized”, “medial rotating”, “medial congruent”, medial ball and socket”, “arthroplasty”, “TKA”, “TKR”, and “knee surgery”. Results 18 articles met the inclusion criteria for the present study. The average quality was 11.4 for non-comparative studies and 21.7 for comparative studies based on MINORS criteria. A total 2832 knee arthroplasties were included for the final analysis with an average age of 69 years, and an average follow-up of 8.1 years (minimum 5 years). The overall reoperation rate was 2.4%, with periprosthetic joint infection as the leading cause of revision in 0.9% of cases, followed by aseptic loosening in 0.4% of cases. The average Knee Society Score improved to a mean preoperative score of 40.1 to a mean postoperative score of 89.2. The functional knee society score improved from a mean preoperative score of 44.8 to an average postoperative score of 82.9. The global range of motion improved from 104.8° preoperatively to 115.6° postoperatively. Conclusion We found that medial pivot system in primary total knee arthroplasty provide overall mid-term survivorship comparable to other standard implasnts. In addition, medial pivot system is associated with better high-end function compared to standard implants.

Background The ability to utilize magnetic resonance imaging (MRI) to assess bony fixation in 3 dimensions may allow a better understanding of the implant design and bony integration. We hypothesized that a new 3-dimensionally printed cementless highly porous acetabular component (Stryker Trident II TritaniumTM) would show better fixation than an earlier cup from the same manufacturer as assessed by the noninvasive technique of multispectral MRI. Methods Multiacquisition variable-resonance image combination selective metal suppression MRI was performed in 19 patients implanted with a new 3-dimensionally printed cup and 20 patients who had received a previous-generation cup from the same manufacturer at 1-year follow-up. Each cup was graded globally as well as by 9 specific zones. Integration grades were performed for each zone: 0, full bone integration; 1, fibrous membrane present; 2, osteolysis; and 3, fluid present. A mixed-effects logistic regression model was used to compare fixation between the 2 groups. Results All cups in both cohorts showed greater than 90% radiographically estimated global bony integration (3-dimensionally printed cups, 99.4%; regular cups 91.6%) with no osteolysis or fluid observed in any cup. The 3-dimensionally printed cup had 1 of 171 zones (0.6%) graded as fibrous membrane present, while the 2-dimensional group had 15 of 180 zones (8.3%) graded as fibrous. Of note, screw hole regions were omitted but may be read as fibrous membrane areas. Conclusion Using multiacquisition variable-resonance image combination selective MRI, our analysis showed greater biologic fixation and less fibrous membrane formation in the 3-dimensionally printed cups than the control group at 1-year follow-up.

BackgroundThe purpose of this study was to evaluate (1) the reoperation rates and survivorship for septic and aseptic causes, (2) radiographic outcomes, and (3) clinical outcomes of condylar-constrained knee (CCK) implants used in primary total knee arthroplasty (TKA) with severe coronal deformity and/or intraoperative instability.Materials and methodsA consecutive series of CCK implants in primary TKA was retrospectively evaluated in patients with severe coronal deformities. Forty-nine patients (54 knees) were included with a mean follow-up of 9 years (range 6–12). All patients were treated with a single-design, second-generation CCK implant. The primary diagnosis was osteoarthritis in 36 knees, post-traumatic arthritis in 7 knees, and rheumatoid arthritis in 4 knees. Preoperatively, standing femorotibial alignment was varus in 22 knees and valgus in 20 knees.ResultsAt a mean follow-up of 9 years, overall survivorship was 93.6%. Two knees (4.3%) required revision for periprosthetic joint infection. One knee (2.1%) required subsequent arthroscopy due to patellar clunk syndrome. At final follow-up, no evidence of loosening or migration of any implant was reported, and the mean Knee Society knee scores improved from 43 to 86 points (p p ConclusionCCK implants in primary TKA with major coronal deformities and/or intraoperative instability provide good midterm survivorship, comparable with less constrained implants. In specific cases, CCK implants can be considered a viable option with good clinical and radiographic outcomes. However, a higher degree of constraint should be used cautiously, leaving the first choice to less constrained implants.Level of evidenceTherapeutic study, level IV.

Introduction: In conjunction with impaction bone grafting (IBG), metal meshes have been proposed to minimise defects of the medial and superolateral walls in order to convert combined complex uncontained segmental defects into contained cavitary defects to facilitate IBG. Methods: The US National Library of Medicine (PubMed/MEDLINE), EMBASE, and the Cochrane Database of Systematic Reviews were queried for publications from January 1980 to March 2019 utilising keywords pertinent to total hip arthroplasty (THA), acetabular impaction bone grafting, clinical or functional outcomes, revision THA, or postoperative complications. Results: 7 articles were found to be suitable for inclusion in the present study. The mean modified Coleman methodology score for methodological deficiencies of the studies was 45.3 (range 38–59). Severe acetabular bone loss was present in 56% of cases having moderate bone loss in 18%, and mild in 26%. The all-cause reoperation rate was 7.4%, while the all-cause revision rate of the acetabular component was 6.2%. Conclusions: IBG with mesh is effective for selected patients with acetabular bone defects. Most patients with moderate bone loss as well as selected patients with large superolateral defects can be successfully treated with IBG combined with mesh. There is limited data to show that IBG with mesh might be associated with decreased survival rates in patients with severe lateral defects (Paprosky IIIA) combined with ischial or medial wall osteolysis who require combined medial and lateral meshes. In addition, patients with severe superomedial migration of the cup (Paprosky IIIB) should not be treated with IBG and mesh.

Background: It has not been determined yet whether hip arthroscopy (HA) leads to adverse outcomes after total hip arthroplasty (THA). The purpose of this study was to (1) determine 2-year conversion rate of HA done for osteoarthritis (OA) to THA and (2) explore the relationship between HA performed in patients with hip osteoarthritis and the risk of revision THA within 2 years of index arthroplasty. Methods: Data was collected from the Medicare Standardized Analytic Files insurance database using the PearlDiver Patient Records Database from 2005–2016. Patients were stratified into 2 groups based upon a history of hip arthroscopy prior to THA. Results: The 2-year conversion to THA rate for hip arthroscopy in patients with OA was 68.4% (95% CI, 66.2–70.6%). Multivariate analysis demonstrated that OA patients who underwent HA prior to THA were at an increased risk of revision surgery (OR 3.72; 95% CI, 3.15–4.57; p = 0.012), periprosthetic joint infection (OR 1.86; 95% CI, 1.26–2.77, p = 0.010) and aseptic loosening (OR 2.81; 95% CI, 1.66–4.76; p Conclusions: Analysis of a large insurance database found the conversion rate from HA performed in Medicare OA patients to THA within 2 years is unacceptably high. Hip arthroscopy prior to THA also significantly increased the risk of THA revision within 2 years after index THA. These results suggest that arthroscopic hip surgery should not be performed in patients with a diagnosis of OA as conversion rates are high and revision rates post THA are significantly increased.

Several clinical trials have retrospectively evaluated the role of extended trochanteric osteotomy in two-stage total hip arthroplasty (THA) revision for the management of periprosthetic joint infection of the hip. However, no systematic review of the literature has been published to date to evaluate the clinical, functional, and radiographic outcomes of extended trochanteric osteotomy (ETOs) performed as part of implant removal during a two-stage revision for the management of periprosthetic joint infection (PJI). The US National Library of Medicine (PubMed/MEDLINE), and the Cochrane Database of Systematic Reviews were queried for publications from January 1980 to April 2019 using the following keywords: “extended” AND “trochanteric” AND “osteotomy.” Six studies included in this systematic review assessed 305 cases (281 patients) of PJI treated surgically with two-stage revision combined with ETO at the first stage. The mean overall union rate of the ETO was 97%, while the overall rate of radiographic femoral stem subsidence >5 mm was 5%. In addition, the overall mean infection-free rate of two-stage revision combined with ETO was 94% (288 out of 305 operated hips), while the overall complication rate requiring reoperation was 8% (26 out of 305 operated hips). Finally, there was some evidence to show that two-stage revision with ETO was associated with improved infection-free rates compared with two-stage revision without ETO. ETO seems safe and effective in patients with well-fixed femoral stems who require two-stage THA revision for the management of chronic PJI. Two-stage revision with ETO might result in improved infection-free rates compared with two-stage revision without ETO.

Recently, a variety of studies have analyzed the potential correlation between lumbar degenerative disease (LDD) and inferior clinical outcomes after total hip arthroplasty. However, there has been limited data concerning the role of LDD as a risk factor for failure after total knee arthroplasty (TKA). The aim of our study was to determine: (1) what is the association of LDDs with TKA failure (all-cause revision) within 2 years of index arthroplasty and (2) if patients with LDD and lumbar fusion are at increased risk of TKA revision within 2 years compared with LDD patients without fusion. Data were collected from the Humana insurance database using the PearlDiver database from 2007 to 2017. To assess aim 1, patients were stratified into two groups based on a prior history of LDD (International Classification of Diseases [ICD]-9 or -10 diagnostic codes). To analyze aim 2, patients within the LDD cohort were stratified based on the presence of lumbar fusion (lumbar fusion Current Procedural Terminology code). All-cause revision rate was 3.4% among LDD patients versus 2.4% of patients with non-LDD (p

We present a rare case of a patient who presented with complete and rapid wear-through of a ceramic femoral head through a polyethylene liner and titanium acetabular cup. In addition, this patient exhibited significantly elevated serum titanium ion levels, which may serve as a marker of severe metallosis in cases where the preoperative plain radiographs underestimate signs of periarticular metal debris. The unique findings of this case include the rapid (less than 1 year time) wear-through of the femoral head in interval radiographs and the dramatic progression of metallosis and pelvic and femoral osteolysis that required both component revision. In addition, the markedly elevated titanium levels secondary to cup wear-through are also of interest and demonstrate a systemic manifestation of abrasive wear of a titanium alloy component. Keywords: Total hip arthroplasty, Revision arthroplasty, Wear-through cup failure, Catastrophic failure, Osteolysis, Ceramic on poly

Total hip arthroplasty (THA) is considered the most successful orthopedic surgical procedure of the last century with excellent survivorship up to 20-years. However, instability remains a major issue representing the most common reason for revision after THA. Hip-spine relationship has gained progressive interest between arthroplasty surgeons and its understanding is crucial in order to identify high-risk patients for postoperative dislocation. Spinal deformity and abnormal spinopelvic mobility have been associated with increased risk for instability, dislocation and revision THA. Preoperative workup begins with standing anteroposterior pelvis x-ray and lateral spinopelvic radiographs in the standing and sitting position. Hip-spine stiffness needs to be addressed before THA in consideration of adapting the preoperative planning to the patient’s characteristics. Acetabular component should be implanted with different anteversion and inclination angles according to the pattern of hip-spine motion in order to reduce the risk of impingement and consequent dislocation. Different algorithmic approaches have been proposed in case of concomitant hip-spine disease and in case of altered sagittal balance and pelvic mobility. The aim of this review is to investigate and clarify the hip-spine relationships and evaluate the impact on modern total hip arthroplasty.

Total knee arthroplasty (TKA) is a highly successful operation that improves patients’ quality of life and functionality. Yet, up to 20% of TKA patients remain unsatisfied with the functional outcomes. Robotic TKA has gained increased attention and popularity in order to improve patient satisfaction and implant survivorship by increasing accuracy and precision of component implantation. The current systematic review was run in order to compare implant survivorship, complication rates, clinical outcomes, and radiological outcomes between robotic-assisted TKA (RA) and conventional manual TKA (CM). Articles were referenced from the US National Library of Medicine (PubMed/MEDLINE), EMBASE, and the Cochrane Database of Systematic Reviews. Nine comparative studies with 1199 operated knees in 1159 patients were included, 614 underwent active or semiactive robotic-assisted TKA compared to 585 CM-TKA. Improvements in the RA group were reported for early functional outcomes, radiographic outliers (RA 16% vs CM 76%) and radiolucent lines (RA 0% vs CM 35%). No significant differences between the two groups were reported in overall survivorship (RA 98.3% vs CM 97.3%), complication rate (RA 2.4% vs CM 1.4%) and operative time (RA 88 min vs CM 79 min). Despite higher costs, roboticassisted TKA offers better short-term clinical outcomes when compared to conventional manual technique with reduction in radiographic outliers and reduced risks of iatrogenic soft tissues injuries (reduced blood loss and postoperative drainage). Further high-quality long-term studies of modern robotic systems are required in order to evaluate how the increased accuracy and reduced outliers affect the long-term survivorship of the implants and the clinical outcomes.

INTRODUCTION In patients undergoing total knee arthroplasty (TKA), it is unclear whether a difference in complication rates exists between patients discharged the day of surgery compared with subsequent postoperative days. METHODS Data were collected from the PearlDiver Patient Records Database from 2007 to 2017. Subjects were identified using International Classification of Diseases codes. Eligible patients were stratified into the following three groups: (1) same day discharge (

The effect of obesity in shoulder arthroplasty has been recently reported in the literature with different and conflicting results. This review analyzes the role of obesity on outcomes and complications in shoulder arthroplasty. Morbid obesity (body mass index >40 kg/m2), more than standard obesity, is associated with a longer operative time, higher complication rate, reoperation rate and superficial infection. Obesity does not have a detrimental effect on functional outcomes. The magnitude of functional improvement in obese patients, however, can be inferior to that in nonobese patients. Obesity and morbid obesity do not increase hospital charges.

Swimmer’s shoulder is the term used to describe the problem of shoulder pain in swimmers. Originally described as supraspinatus tendon impingement under the coracoacromial arch, it is now understood that several different pathologies can cause shoulder pain in competitive swimmers, including subacromial impingement syndrome, overuse and subsequent muscle fatigue, scapular dyskinesis, and laxity and instability. Swimmers may develop increased shoulder laxity over time due to repetitive use. Such excessive laxity can decrease passive shoulder stability and lead to rotator cuff muscle overload, fatigue, and subsequent injury in order to properly control the translation of the humeral head. Generalized laxity can be present up to 62% of swimmers, while a moderate degree of multi-directional instability can be present in the majority. Laxity in swimmers can be due to a combination of underlying inherent anatomical factors as well as from repetitive overhead activity. The role of excessive laxity and muscle imbalance are crucial in the swimmer’s shoulder and should be well understood since they are the primary target of the training and rehabilitation program.

As health care costs continue to rise, same-day and rapid discharge have become popular options for total hip arthroplasty (THA). However, it remains unclear if there is a difference between within-a-day discharge and early discharge for 1-year clinical outcomes.Data were collected from the Humana insurance database using the PearlDiver Patient Records Database from 2007 to 2017, identifying patients receiving a primary THA. Patients were then stratified into three groups: (1) discharge within a day (length of stay [LOS]24 hours), (2) rapid discharge (LOS: 1-2 days), and (3) traditional discharge (LOS: 3-4 days). The outcomes assessed were all-cause revision surgery, periprosthetic joint infection, prosthetic loosening, prosthetic dislocation, and periprosthetic fracture at 1 year postoperatively.In total, 40,038 patients met inclusion criteria. Among those, 754 (1.88%) patients were discharged within a day, 13,670 (34.14%) patients were in the rapid discharge cohort, and 25,614 (63.97%) patients were in the traditional discharge cohort. After multivariate analysis, no significant differences were observed between the within-a-day discharge group and either the rapid discharge or the traditional discharge group. Rapid discharge patients were at decreased risk of periprosthetic joint infection (odds ratios: 0.747, 95% confidence interval: 0.623-0.896) and readmission (odds ratios: 0.778; 95% confidence interval: 0.735-0.824, P.001) compared with traditional discharge patients.No significant differences were observed in the one-year outcomes of primary THA between within-a-day discharge patients, rapid discharge, and traditional discharge. For those that qualify after careful selection, outpatient THA might be a feasible alternative to the traditional inpatient THA.

Background Dual mobility (DM) articulations have become an increasingly popular bearing choice in efforts to reduce dislocation rates in high risk primary and revision total hip arthroplasties (THA). However, DM dislocations can still occur. Intraprosthetic dislocation (IPD) is a unique failure mode for DM compared to standard femoral heads. Currently, the incidence of this phenomenon during attempted hip reduction is unknown. Methods A retrospective analysis of a consecutive series of all primary, revision, and conversion THA procedures performed by a single surgeon was collected. For all dislocations, patient demographics, location where reduction was performed, type of anesthetic used was recorded. For DM dislocations, the rate of successful closed reduction, reoperation due to failure of closed reduction, and incidence of IPD at time of reduction was recorded. Descriptive statistics were conducted on the data. Results In total, 527 cases were included for analysis. The overall rate of dislocation (with and without DM) was 2.85%. Among DMs, the dislocation rate was 4.55%. The rate of IPD after closed reduction was 5/7 (71%) with all five requiring revision surgery to either another DM bearing or constrained liner. Conclusions We report a high rate of early IPD after DM dislocation. This study supports alternative treatment protocols for these patients including regional or general anesthesia to be administered in the operating room and for the reduction to be performed under fluoroscopy. Dislocated DM components handled in this manner could reduce the high incidence of IPD reported.

Utilization of social media both in the private and professional arenas has grown rapidly in the last decade. The rise of social media use within health care can be viewed as the Internet-based corollary of the patient-centered care movement, in which patient perspectives and values are central to the delivery of quality care. For orthopedic surgeons and their practices, general-purpose online social networks, such as Facebook and Twitter, are convenient platforms for marketing, providing patient education and generating referrals. Virtual health communities are used less frequently by orthopedic surgeons but provide forums for patient engagement and active surgeon-to-patient communication via blogs and ask-the-doctor platforms. This commentary reviews the current state of social media use in orthopedic practice, with particular emphasis on managing the extension of the surgeon-patient relationship online, including the unique practice risks social media poses, such as privacy concerns, potential liability, and time consumption.

Proximal femoral replacements (PFRs) have been recently utilized in complex revision arthroplasties where proximal femoral bone is compromised. The purpose of this study is to evaluate the clinical outcomes, complications, and survivorship of PFRs as a salvage treatment for severe bone loss after non-oncologic revision total hip arthroplasty. This is a retrospective review of all patients who underwent femoral revision surgery using a single design PFR between 2004 and 2013 at our institution. Forty patients (41 hips) were included with a mean age of 64 years (29–90). According to Paprosky classification, 15 femurs had type IIIB defect, and 26 had type IV defect. Patients were followed for a mean of five years (2–10). The average length of reconstruction was 150 mm (81–261). A Kaplan–Meier analysis was used to determine the survival of the PFR. A total of nine patients (9 PFRs, 22%) were re-operated upon. Three re-operations were for infection, two for dislocation, two for aseptic loosening, and two for periprosthetic fracture. The survivorship at five years was 95.1% for revision of the femoral stem for aseptic loosening. We did not find length of the segmental reconstruction or the indication for revision, to be a risk factor for implant failure or re-revision. Proximal femoral replacements have shown an acceptable survivorship in non-oncologic revision hip arthroplasties for severe proximal femoral bone loss. The frequent use of constrained liners may decrease the risk of dislocation due to the loss of the abductor mechanism encountered in these complex reconstructions.

Complex glenoid bone deformities present the treating surgeon with a complex reconstructive challenge. Although glenoid bone loss can be encountered in the primary setting (degenerative, congenital, post-traumatic), severe glenoid bone loss is encountered in most revision total shoulder arthroplasties. Severe glenoid bone loss is treated with various techniques including hemiarthroplasty, eccentric reaming, and glenoid reconstruction with bone autografts and allografts. Despite encouraging short- to mid-term results reported with these reconstruction techniques, the clinical and radiographic outcomes remain inconsistent and the high number of complications is a concern. To overcome this problem, more recently augmented components and patient specific implants were introduced. Using the computer-aided design and computer-aided manufacturing technology patient-specific implants have been created to reconstruct the glenoid vault in cases of severe glenoid bone loss. In this article we describe a patient specific glenoid implant, its indication, technical aspects and surgical technique, based on the author's experience as well as a review of the current literature on custom glenoid implants.

BACKGROUND: Effective blood management strategies are a major determinant of successful outcomes after one-stage bilateral total knee arthroplasty (BTKA). Proper patient selection with preoperative optimization and intra- and postoperative interventions can reduce transfusion risk and associated morbidity in these patients. QUESTIONS/PURPOSES: The purpose of this study was to evaluate intraoperative blood management modalities based on three keystone questions: (1) What is the role of the anesthesiologist?, (2) Which are the surgeon-dependent strategies?, and (3) Is there any place for pharmacologic interventions? METHODS: We searched the established electronic literature database MEDLINE. After critical appraisal, 94 studies were deemed eligible from which to draw documented evidence. RESULTS: A number of blood-conserving methods are currently implemented in patients undergoing one-stage BTKA. Among them, regional anesthesia, tourniquet use, and tourniquet deflation after wound closure, femoral canal sparing or femoral canal plugging, avoidance of drains, and tranexamic acid use were the intraoperative strategies with documented efficacy in blood conservation. CONCLUSION: Combined proper intraoperative anesthesiologic, surgical, and pharmacologic interventions reduce blood loss and need for transfusion in BTKA patients. However, contemporary relevant literature is lacking evidence-based guidelines. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (10.1007/s11420-017-9590-4) contains supplementary material, which is available to authorized users.

Background Cementless fixation in total knee arthroplasty (TKA) was introduced to improve the longevity of implants but has yet to be widely adopted because of reports of higher failure rates in some series. The cementless tantalum monoblock tibial component, in contrast, has shown successful short-term results, but long-term survivorship with this design is still lacking. The purpose of this study was to investigate the minimum 10-year clinical and radiographic results of the cementless tantalum monoblock tibial component in primary TKA. Methods From March 2002 to March 2005, 33 patients (33 knees) underwent primary TKA with a cementless tantalum monoblock tibial component. All patients were followed clinically and radiographically for a minimum of 10 years (mean 11.5 years, range 10-13 years). No patients were lost to follow-up. The underlying diagnosis that led to the primary TKA was primary osteoarthritis in 31 knees and post-traumatic osteoarthritis in 2 knees. Results None of the components was revised. At a minimum 10-year follow-up, the survivorship with reoperation for any reason as end point was 96.9%. With tibial component revision for aseptic loosening or osteolysis as the end point survivorship was 100%. There was no radiographic evidence of tibial component loosening, subsidence, osteolysis, or migration at the time of the latest follow-up. The mean Knee Society knee scores improved from 56 points preoperatively to 93 points at the last clinical visit. Conclusion The porous tantalum tibial monoblock component demonstrated excellent clinical and radiographic outcomes with no component revisions for aseptic loosening at a minimum follow-up of 10 years.

Background The porous tantalum monoblock cup has demonstrated excellent short-term and midterm clinical and radiographic outcomes in primary THA, but longer follow-up is necessary to confirm the durability of these results into the second decade. The purpose of this study is to report the clinical and radiographic outcomes for this monoblock cup with a minimum 15-year follow-up. Methods From June 1998 to December 1999, 61 consecutive patients (63 hips) underwent primary THA with a tantalum monoblock acetabular component. All patients were followed clinically and radiographically for a minimum of 15 years. At a mean of 15.6 years (range, 15-16 years) of follow-up, 5 patients had died, and 4 had been lost to follow-up, leaving 52 patients (54 hips) for analysis. The underlying diagnosis that led to the primary THA was primary osteoarthritis in 43 hips, avascular necrosis in 4, developmental hip dysplasia in 3, rheumatoid arthritis in 3 and post-traumatic osteoarthritis in 1. Results One cup was revised for deep infection; at surgery, the cup showed osseointegration. At a mean follow-up of 15.6 years (range, 15-16 years), the survivorship with cup revision for aseptic loosening as end point was 100%. There was no radiographic evidence of loosening, migration, or gross polyethylene wear at last follow-up. The mean Harris Hip Scores improved from 47 points preoperatively to 94 points. Conclusion The porous tantalum monoblock cup in primary THA demonstrated excellent clinical and radiographic outcomes with no failures because of osteolysis or loosening at a minimum follow-up of 15 years.

Purpose: The aim of the present paper was to determine (1) the incidence of failure (defined as the persistence or the recurrence of the infection), (2) the incidence of prosthesis (or even limb) loss (defined as the final need for an arthrodesis, resection arthroplasty or amputation) and (3) what factors could influence the failure in patients treated with a two-stage reimplantation for periprosthetic knee infections caused by resistant bacteria. Methods: The authors retrospectively reviewed 29 total knee arthroplasties infected by resistant bacteria in 29 patients who underwent a two-stage revision. Between the stages, intravenous-targeted antibiotics were administered for a median period of 8 (range 6–12) weeks. Median follow-up was 10 (range 7–14) years. Results: The authors found that failure occurred in 5 of 29 patients (17.2 %). When methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-resistant coagulase-negative staphylococci (MR-CoNS) were involved, failure rate was 10 % (2 of 20). When vancomycin-resistant enterococcus (VRE), multidrug-resistant (MDR) Acinetobacter baumannii and MDR Pseudomonas aeruginosa were involved, the failure rate was 33.3 % (3 of 9). Of those five patients, two underwent amputations, one chronic suppressive antibiotic therapy, one arthrodesis and one resection arthroplasty; among them, three lost the limb (10.3 % of the overall group). Timing of reimplantation and patient comorbidities did not significantly influence the failure. Conclusions: Two-stage protocol resulted in a viable option for patients with infections by some resistant organisms (MRSA and MR-CoNS). However, when highly resistant organisms were involved (VRE, MDR Acinetobacter Baumannii and MDR Pseudomonas aeruginosa), the failure rate was much higher. In all cases of failure of the two-stage reimplantation, prosthesis (or even limb) loss occurred. Consequently, patients should be counselled that when highly resistant bacteria are involved, two-stage reimplantation could not be successful, with high final risk of prosthesis (or even limb) loss. Level of evidence: Retrospective case series, Level IV. Purpose: The aim of the present paper was to determine (1) the incidence of failure (defined as the persistence or the recurrence of the infection), (2) the incidence of prosthesis (or even limb) loss (defined as the final need for an arthrodesis, resection arthroplasty or amputation) and (3) what factors could influence the failure in patients treated with a two-stage reimplantation for periprosthetic knee infections caused by resistant bacteria. Methods: The authors retrospectively reviewed 29 total knee arthroplasties infected by resistant bacteria in 29 patients who underwent a two-stage revision. Between the stages, intravenous-targeted antibiotics were administered for a median period of 8 (range 6–12) weeks. Median follow-up was 10 (range 7–14) years. Results: The authors found that failure occurred in 5 of 29 patients (17.2 %). When methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-resistant coagulase-negative staphylococci (MR-CoNS) were involved, failure rate was 10 % (2 of 20). When vancomycin-resistant enterococcus (VRE), multidrug-resistant (MDR) Acinetobacter baumannii and MDR Pseudomonas aeruginosa were involved, the failure rate was 33.3 % (3 of 9). Of those five patients, two underwent amputations, one chronic suppressive antibiotic therapy, one arthrodesis and one resection arthroplasty; among them, three lost the limb (10.3 % of the overall group). Timing of reimplantation and patient comorbidities did not significantly influence the failure. Conclusions: Two-stage protocol resulted in a viable option for patients with infections by some resistant organisms (MRSA and MR-CoNS). However, when highly resistant organisms were involved (VRE, MDR Acinetobacter Baumannii and MDR Pseudomonas aeruginosa), the failure rate was much higher. In all cases of failure of the two-stage reimplantation, prosthesis (or even limb) loss occurred. Consequently, patients should be counselled that when highly resistant bacteria are involved, two-stage reimplantation could not be successful, with high final risk of prosthesis (or even limb) loss. Level of evidence: Retrospective case series, Level IV.