Search

The aim was to discuss the indications, contraindications, advantages, and disadvantages of Nonmetal clasp dentures (NMCDs), as well as the most relevant properties of its constituent materials. A search was conducted using the keywords: “nonmetal clasp dentures,” “thermoplastic resin,” “flexible resin removable partial denture,” “polyamide,” and “nylon” in databases PubMed/Medline, Lilacs, SciELO, and textbooks between 1955 and 2020. Theses and texts without reliable sources of publication were excluded. Once the analysis instruments were determined, the data were analyzed and discussed. NMCDs present high flexibility, easy adaptation to the abutments, color compatibility and biocompatibility with the oral mucosa, and absence of visible metal clasps. However, they need laboratory relining, grinding, and polishing, do not have criteria for its planning, become rougher and stained over time, and are able to traumatize supporting tissues. The association with metal components seems to be an alternative to increase the success of NMCDs by combining esthetics and biomechanical principles of conventional removable partial dentures. The lack of long-term clinical studies makes the professionals to rely solely on previous experiences or on the manufacturers' recommendations. It suggested that NMCDs must be indicated with caution when not used temporarily.

To evaluate the penetration depth (μm) of experimental resin infiltrants containing different percentages of triethylene glycol dimethacrylate (TEGDMA) and phosphoric acid 2-hydroxyethyl methacrylate ester (PAM) in artificial carious white spot lesions (WSL).WSL were produced in 65 bovine flat enamel specimens by pH cycling protocol, which were treated with either Icon (control) or experimental acidic infiltrants based on different percentages of TEGDMA and PAM monomers (acidic), and their association or not with previous acid-etching with phosphoric acid. Ten readings using Confocal Laser Scanning Microscopy were conducted on each specimen and the penetration depth was calculated from the surface until the deepest point with the fluorescent dye Rhodamine B (0.02 mg/mL). The pH and the viscosity of the experimental infiltrants were also tested. Data were statistically analyzed with two-way ANOVA and Tukey tests (α 0.05).The material factor and the interaction material*acid-etching were statistically significant. The lowest penetration depth was observed for the samples treated with the commercial infiltrant after etching with 15% hydrochloric acid. When specimens were pre-treated with PA, highest penetration was seen for specimens treated with 100% TEGDMA, which differed from all other groups. The lowest penetration was seen for those treated with 50:50 TEGDMA:PAM infiltrants. When specimens were not previously etched, highest penetration was seen for Icon, which differed only from those treated with 25% TEGDMA 75% PAM, where the lowest values were seen. The values of viscosity increased and the pH decreased with the addition of PAM in the infiltrant formulations.the association between TEGDMA and PAM seems to allow similar infiltration depth reached by Icon infiltrant without acid etching the enamel surface.

Statement of problem Tooth loss directly affects mastication, cognitive function, and oral health-related quality of life (OHRQoL). Complete dentures (CDs) and removable partial dentures (RPDs) represent a common oral rehabilitation approach. However, studies addressing the impact of removable dentures on replacing missing teeth are lacking. Purpose The purpose of this clinical study was to evaluate whether the OHRQoL, the jaw function limitation (JFL), and the masticatory efficiency of CD and RPD wearers are similar to those of patients with natural teeth and to evaluate whether wearing removable dentures can predict an effect on the OHRQoL, JFL, and masticatory efficiency of their wearers. Material and methods The Oral Health Impact Profile (OHIP-14) questionnaire and the JFL scale were used to measure OHRQoL and JFL. Masticatory efficiency was analyzed by using a subjective color-mixing index for the chewing gum bolus and shape index and an objective colorimetric analysis by using a software program ViewGum. Data were analyzed with Kruskal-Wallis and post hoc Dunn tests, followed by multiple linear regression (α=.05). Results The results from OHIP-14 evidenced that both denture groups presented a low impact on OHRQoL. JFL was higher for all denture wearers. For the subjective color-mixing analysis, the control and RPD groups presented better masticatory efficiency than CD wearers. Colorimetric analysis evidenced better masticatory efficiency for the control group, who differed from the CD and RPD groups. Wearing RPDs was a predictor of impaired JFL and OHRQoL, and the use of CDs was a predictor of impaired JFL and masticatory efficiency. Conclusions Despite being rehabilitated, CD and RPD wearers still had impaired OHRQoL, JFL, and masticatory efficiency. Also, the use of these prostheses can predict a negative effect on these 3 variables.

Made available in DSpace on 2020-12-12T01:19:33Z (GMT). No. of bitstreams: 0 Previous issue date: 2020-06-01 Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) This study aimed to produce a new SiO2+Y-TZP ceramic via uniaxial/isostatic compression that was structurally and chemically characterized relating to its translucency and flexural strength. SiO2 and Y-TZP were mixed using a ball mill, pressed and sintered at 1150 °C. The optical and mechanical properties of the specimens were compared to lithium disilicate (LD) and zirconia-reinforced lithium silicate (ZLS) (Kruskal-Wallis, α = 0.05). The Fourier Transform Infrared Spectroscopy bands suggested an interaction between Si, O and Zr. Contrast ratio and translucency parameter of the experimental ceramic were higher and lower, (p = 0.000001) respectively, than those of the LD and ZLS. The experimental ceramic presented similar flexural strength to ZLS, but lower than LD (p < 0.0001). It can be concluded that this processing method is efficient to obtain a SiO2+Y-TZP ceramic and 1150 °C crystallizes SiO2 without inducing t-m transformation. The SiO2+Y-TZP ceramic presented lower translucency and higher masking ability than the commercially available glass-ceramics, but similar flexural strength to one glass-ceramics. Department of Operative Dentistry Endodontics and Dental Materials Bauru School of Dentistry University of São Paulo Department of Prosthodontics and Periodontics Bauru School of Dentistry University of São Paulo Department of Chemistry UNESP-School of Science São Paulo State University Department of Mechanical Engineering São Carlos School of Engineering University of São Paulo Department of Physics UNESP-School of Science São Paulo State University Department of Biomaterials and Oral Biology School of Dentistry University of São Paulo Department of Pediatric Dentistry Orthodontics and Public Health Bauru School of Dentistry University of São Paulo Department of Chemistry UNESP-School of Science São Paulo State University Department of Physics UNESP-School of Science São Paulo State University FAPESP: 2017/18157-4

Objectives This study evaluated the erosive tooth wear promoted by commercial whitening toothpastes on eroded dentin in vitro. Design Ninety bovine roots were embedded, polished and subjected to the baseline profile analysis. The samples were protected in 2/3 of the dentin surface and were randomly assigned to 6 groups (n = 15/group): Oral-B 3D White; Close-up Diamond Attraction Power White; Sorriso Xtreme White 4D; Colgate Luminous White; Crest and erosion only. All samples were submitted to erosive pH cycles (4 × 90 s in 0.1% citric acid, pH 2.5, per day) and abrasive challenges (2 × 15 s, per day) for 7 days. The samples were subjected to abrasion, using toothbrushing machine, soft toothbrushes and slurries of the tested toothpastes (1.5 N, 1:3 water). Between the challenges, the samples were immersed in artificial saliva. The final profile was overlaid to the baseline profile for the calculation of the erosive dentin wear (μm). The data were subjected to Kruskal-Wallis/Dunn tests (p Results Colgate Luminous White (4.7 μm) and Sorriso Xtreme White 4D (4.0 μm) promoted the highest wear, similarly to Oral-B 3D White (2.3 μm). Oral-B 3D White promoted similar wear compared to Crest (1.1 μm) and Close-up Diamond Attraction Power White (1.2 μm); however, it induced significant higher dentin wear compared to erosion only (1.0 μm). Close-up Diamond Attraction Power White and Crest did not increase the erosive wear compared to erosion only. Conclusion Some whitening toothpastes increase the wear of eroded dentin, which should be considered by the dentist when prescribing them to patient with root exposure.

Statement of problem Although the 2D analysis of prosthesis cementation space has been popular, its correlation with volumetric comparison (3D data) of cement space is unclear. Purpose The purpose of this in vitro study was to evaluate the cement space in computer-aided design and computer-aided manufacturing (CAD-CAM) crowns of different materials and correlate 2D measurements of cement space with their corresponding 3D values (volume of cement space) by using microcomputed tomography (μCT) analysis of regions of interest. Material and methods Ten molar crowns were milled in lithium disilicate (LD), resin nanoceramic (RN), and zirconia (Z) ceramics. Silicone replicas were produced and used as the analog cement layer and scanned with a desktop X-ray microfocus CT scanner. Twenty-eight slices were evaluated in 3 regions: marginal, axial, and occlusal (n=84 measurement points/specimen). After 3D reconstruction of the cement space, the volume was calculated. Data were statistically evaluated through 2-way ANOVA and Bonferroni test (α=.05). The Pearson correlation test was used to investigate the correlation between the 2D and 3D data. Results The volumes of the occlusal (LD 10 ±1 mm3; RN 9 ±1 mm3) and axial regions (LD 9 ±2 mm3; RN 8 ±1 mm3) were significantly higher than the volume of the marginal region for LD and RN specimens (LD 6 ±2 mm3; RN 4 ±1 mm3) (both P Conclusions Z showed more volume of cement space, as well as thicker cement space than LD and RN. The μCT analysis is an efficient method of analyzing cement thickness and volume in ceramic crowns at the selected regions of interest. A moderate positive correlation was found between the 2D and 3D analyses for the axial and marginal regions of ceramic crowns.

Made available in DSpace on 2022-04-28T19:27:23Z (GMT). No. of bitstreams: 0 Previous issue date: 2019-01-01 Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) Aim: This study aimed to evaluate oral and systemic conditions in morbidly obese patients with and without metabolic syndrome (MS) prior to bariatric surgery. Methods: One hundred patients were included and equally divided into two groups: G1 - with MS (n = 50) and G2 - without MS (n = 50). MS was diagnosed in patients presenting at least three of five signs: abdominal obesity, high triglyceride level, low high-density lipoprotein cholesterol (HDL-C) level, hypertension, and altered fasting glycemia. Variables analyzed included the patients' age, sex, body mass index (BMI), waist-to-hip ratio (WHR), and number of missing teeth. Both BMI and WHR were used to evaluate the risk of developing cardiovascular disease (RCVD). Mann-Whitney, Chi-squared, t test, hierarchical multiple linear regression and binary logistic regression models were used in statistical analyses (p < 0.05). Results: There were no group-wise differences in sex (p=0.631) and BMI (p=0.200); however, the WHR (p=0.009), age (p=0.0001), and number of missing teeth (p=0.0003) were higher in G1. Obese patients with MS who were candidates for bariatric surgery presented higher RCVD than obese patients without MS (p=0.019). Binary logistic regression revealed patient age [adjusted OR=1.05, 95% CI=1.00-1.11, p=0.042] and number of missing teeth [adjusted OR=1.17, 95% CI=1.04-1.31, p=0.013] to be significant predictors of MS. Conclusion: Morbidly obese patients with MS had worse oral and systemic conditions than those without MS, regarding WHR, RCDV and number of missing teeth. Department of Pediatric Dentistry Orthodontics and Public Health Bauru School of Dentistry University of São Paulo Department of Operative Dentistry Endodontics and Dental Materials Bauru School of Dentistry University of São Paulo Department of General Surgery Botucatu School of Medicine University of State of São Paulo Department of Surgery Faculty of Medical Sciences State University of Campinas FAPESP: 2013/19691-3

This study evaluated the protective effect of TiF4 varnish, after pre-treatment with proantocyanidin or chlorhexidine, on the progression of erosive dentin loss (EDL), under the presence or absence of the demineralized organic matrix (DOM). Bovine root dentin samples were eroded for 30 min (0.1% citric acid, pH 2.5) and the loss was measured by profilometry. Half of them were subjected to the DOM removal using collagenase for 4 days, while the other half remained immersed in water. The removal of DOM was checked by profilometry. Samples were divided into 24 groups (n = 15) according to the factors: 1– With or without DOM; 2– Pre-treatment with 0.012% chlorhexidine gel, 10% proanthocyanidin gel or untreated for 1 min; 3–Final Treatment with TiF4 varnish, NaF varnish, placebo varnish or untreated for 6 h. The samples were submitted to a pH cycling for 5 days: 0.1% citric acid (4 × 90s/day) and artificial saliva between the challenges. The final profile was obtained for the calculation of EDL (μm, three-way ANOVA/Tukey test). When DOM was preserved, the EDL was lower compared to the condition without DOM (7.08 ± 4.03 μm and 9.80 ± 3.79 μm, p

Made available in DSpace on 2022-04-28T19:04:55Z (GMT). No. of bitstreams: 0 Previous issue date: 2016-10-01 Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) Society has changed its own lifestyle, specially its eating habits and physical activities, leading to excessive weight and a sedentary behavior, which has contributed to obesity increase. Bariatric surgery is the most effective treatment to obesity, allowing weight loss and its maintenance. However, it has been related high levels of iron deficiency after surgery. A person's nutritional status might be affected by total or partial tooth loss. The aim of this longitudinal prospective cohort study was to evaluate the levels of serum ferritin before and after bariatric surgery and to identify if there is a relation with tooth loss. The sample was composed of 50 patients selected and assisted at Amaral Carvalho Hospital, located in Jaú city, Brazil. The use and necessity of prosthesis, dental absence or presence, and serum ferritin dosage were evaluated. Student's t test, Univariate analysis, Chi-square and Odds Ratio were adopted (p