Search

Objectives Prospective practice-based clinical evaluation of chairside fabricated monolithic partial crowns composed of zirconia-containing lithium silicate (ZLS) ceramic material. Materials and methods Between October 2013 and September 2014, 71 patients were restored with 92 partial crowns on vital or sufficiently endodontically treated teeth. The monolithic restorations were fabricated chairside (Cerec SW 4.2/Cerec MC XL) from a glaze-fired ZLS ceramic material (Celtra Duo, Dentsply Sirona, Bensheim, Germany). Adhesive cementation was performed using the total-etch technique with one of two dual-curing composite materials. Modified United States Public Health Service parameters were evaluated annually; moreover, the parameters "time-dependent survival" (in situ criterion) and "success rates" (event-free restorations) were evaluated according to Kaplan-Meier analysis. Results Sixty-nine patients with 17 premolar and 71 molar partial crowns attended annual follow-up examinations (observational period: 36.0 ± 5.7 months). Two complete failures were recorded and were caused by a tooth fracture (at 30 months) and a restoration fracture (at 38 months), (3-year survival rate: 99%; 95% confidence interval (CI 95%): [0.97;1]). One clinical intervention was necessary (endodontic treatment) to maintain function (3-year success rate: 98%; (CI95%: [0.95:1]). Conclusions Chairside-fabricated ZLS partial crowns show a good initial clinical performance. However, to further evaluate this new material, clinical data from studies with longer observational periods are required. Clinical significance Based on this mid-term evaluation, ZLS ceramics appear to be a promising alternative material for the chairside fabrication of adhesively luted monolithic posterior restorations with a low risk of material-related complications.

AIM: To assess whether the use of deproteinized bovine bone mineral (DBBM) and native bilayer collagen membrane (NBCM) improved healing of peri-implantitis-related bone defects at 12 months. MATERIALS AND METHODS: In a multicentre randomized clinical trial, 32 individuals received surgical debridement (CG), and 34 adjunct use of DBBM and NBCM (TG). Radiographic defect fill (RDF), probing pocket depth (PPD), bleeding on probing (BOP) suppuration (SUP), recession (REC), cytokines (IL-1β, IL-1ra, IL-6, IL-8, IL-12, IP10, PDGF-BB, TNF-α, VEGF), and patient-reported outcomes (PROs) were evaluated at 3, 6, 9 and 12 months. RESULTS: RDF at deepest site amounted 2.7 ± 1.3 mm in TG and 1.4 ± 1.2 mm in CG (p, Stefan Renvert received grants and personal fees from Geistlich Pharma AG during the conduct of the study. Jean-Louis Giovannoli received grants from Geistlich Pharma AG during the conduct of the study. Ann-Marie Roos-Jansåker received grants from Geistlich Pharma AG during the conduct of the study and personal fees from Unident AB, Sweden, outside the submitted work. Sven Rinke received grants and personal fees from Geistlich Pharma AG during the conduct of the study.

Purpose A retrospective evaluation of extended anterior ceramic laminate veneers (EACVs) after a mean observational period of 10 years. Methods Thirty-one patients (20 females/11 males) underwent restoration with 101 adhesively luted, heat-pressed EACVs (maxilla, n = 65; mandible, n = 36). Results The 10 year survival rate was 91.8% (95% confidence interval [95%-CI]: 0.87;0.97). Eight ceramic fractures, one biological failure, and one change in treatment plan caused the observed failures. Seventy-seven of the 101 restorations remained intervention-free in service (success rate: 78.6% [95%-CI: 0.70;0.88]). Fourteen interventions were needed (nine recementations, two endodontic treatments, two composite fillings, and one fracture polishing). The jaw position (maxilla/mandible, survival P = .578/success P = .056) had no influence on the clinical performance. EACVs covering large areas of exposed dentin (>50%) were associated with a significantly increased risk (hazard ratio 2.98, P = .019) of needing a clinical intervention (success rate: 68.0% [95%-CI: 0.52; 0.84]). However, the degree of dentin exposure had no effect on the survival rate (P = .761). Conclusions After a mean observational period of 10 years, mandibular and maxillary EACVs exhibited survival and success rates that were comparable. Significantly lower success rates were associated with large areas of exposed dentin (>50%). Clinical significance Mandibular and maxillary EACV revealed 10-year survival rates comparable to those published for anterior metal-ceramic and glass-ceramic full-coverage crowns. Precaution should be taken not to expose dentin, and when large areas of dentin are exposed, different conditioning/luting strategies should be used.

This in vitro study evaluated the effects of different abutment axial heights on the retentiveness of adhesively and self-adhesively luted zirconia copings. Ankylos implants were embedded in resin blocks. Two groups of titanium abutments (“long”, height: 6.79 mm, taper: 4.8°; “short”, height: 4.31 mm, taper: 4.8°; Compartis-ISUS, DeguDent) were used for the luting of CAD/CAM-fabricated zirconia copings (Compartis, DeguDent) with an adhesive (Multilink Automix; Ivoclar Vivadent) and a self-adhesive (RelyX Unicem; 3M ESPE) composite. After water storage and 5000 thermocycles (5 °C/55 °C), retention forces were evaluated using a universal testing machine (Zwick). Significant differences were determined via two-way ANOVA and t-tests with Bonferroni-Holm correction. Significant interactions between abutment geometry and luting agents were observed. RelyX Unicem showed the highest levels of retentiveness, irrespective of the varying abutment geometries (mean values long/short: 487.7 N/447.9 N). When Multilink Automix was used, removal forces were significantly lower (311.7 N/101.1 N) and negatively affected by the use of the shorter abutments. Customized long abutments supported better retention forces than customized short abutments for both luting agents.

Objectives Retrospective evaluation of extended anterior glass-ceramic veneers 7 years after placement in a private practice. Materials and methods A total of 31 patients (20 females/11 males) underwent restoration with adhesively luted extended veneers that were fabricated using heat-pressed glass-ceramic (Cergo, Dentsply Sirona). A single dentist restored 101 teeth (maxilla, n = 65; mandible, n = 36). Adhesive cementation was performed using an etch-and-rinse adhesive (OptibondFL, Kerr Corporation), and two different dual-curing composite cements (Variolink, Ivoclar Vivadent/Calibra, Dentsply Sirona). Results After 7 years, the Kaplan-Meier survival rate (in situ criteria) was 93.6% (95% CI: 0.89; 0.98). The observed failures were caused by ceramic fractures for seven restorations and biological failure for one restoration. In total 80 of the 101 restorations were still in service and did not require any clinical intervention (7-year success rate: 84.3% [95% CI]: 0.76; 0.93). Interventions were necessary in 13 cases (8 recementations, 2 endodontic treatments, 2 composite fillings (caries), and 1 polishing of minor fractures). The clinical performance was not influenced by the veneer position (maxilla/mandible, survival P = .56/success P = .30). The veneers that covered large areas of exposed dentin (>50%) exhibited a significantly increased risk (hazard ratio 3.71, P = .0041) for requiring a clinical intervention; however, no effect on the survival rate was observed for these veneers (P = .35). Conclusions Following 7 years of clinical service, extended anterior ceramic veneer restorations exhibited comparable survival and success rates for the upper and lower jaw. Large areas of exposed dentin (>50%) were associated with significantly lower success rates. Clinical significance Dentin exposure (more than 50% of the preparation surface) during preparation significantly affects the clinical performance of extended heat-pressed glass-ceramic veneers.

The aim of this randomized clinical study was to detect the effect of an instruction within a group using oscillating-rotating (OR), sonic-active (SA), or manual toothbrushes (MTB) in young, oral healthy adults.One hundred fifty participants were randomly assigned into six groups (n = 25): with (OR-I, SA-I, MTB-I) and without instruction (OR-NI, SA-NI, MTB-NI). Participants in I subgroups received one standardized instruction of the toothbrush system. At baseline (t0), after 2 (t1), 4 (t2), and 12 weeks (t3), plaque indices including modified Quigley-Hein Index (QHI) and Marginal Plaque Index (MPI) as well as inflammation indices including Papilla Bleeding Index (PBI) and Gingival Index (GI) were assessed. Kruskal-Wallis test, Friedman test, and chi-square or Fisher's exact test (p 0.05) were used for statistical analysis.One hundred thirty-one participants completed the follow-up and were analyzed: OR-I = 21, OR-NI = 22, SA-I = 22, SA-NI = 22, MTB-I = 22, and MTB-NI = 22. Within groups between t0 and t3, OR and SA systems showed a significant plaque reduction, irrespective of instruction (pThe used toothbrush as well as the presence or absence of a single brush-specific instruction has no influence on plaque removal and reduction of gingival inflammation in young, oral healthy adults in an observation period of 12 weeks.A single instruction might bring no benefit in this patient group, independently of the used toothbrush system.

The aim of this study was to evaluate microbiological findings and aMMP-8 level of peri-implant mucositis (M) and peri-implantitis (P) in patients undergoing supportive implant therapy (SIT). Eighty-nine patients with 171 implants were included. The case definitions were as follows: M: PPD ≥4mm, BOP; P: PPD≥4mm, BOP, radiographic bone loss ≥3.5mm. Samples of peri-implant sulcular fluid (PISF) were taken from all peri-implant pockets at each implant to detect periodontal pathogens using PCR and aMMP-8 level with ELISA. Only Treponema denticola (Td) and Prevotella intermedia (Pi) showed significantly higher prevalence in P (healthy implants [HI]: Td=27%, Pi=17%; M: Td=26%, Pi=15%; P: Td and Pi=50%; P0.05). The mean aMMP-8 level at implant sites did not show any significant difference (P=0.05) among HI (5.2±8.1), M (9.9±19.0), and P (4.9±7.7). Microbiological findings and aMMP-8 levels are not reliable criteria to distinguish between HI, M, and P in patients undergoing SIT.

Neben den klassischen metallkeramischen Restaurationen haben sich insbesondere im Frontzahnbereich auch vollkeramische Versorgungen als asthetisch hochwertige Alternative mit vergleichbarer Langzeitbewahrung etabliert 1 . Als Materialgruppen sind dabei neben Zirkonoxidkeramiken auch hochfeste Glaskeramiken (Lithiumdisilikatkeramiken) klinisch erfolgreich im Einsatz. Neu entwickelte Materialien wie z. B. kubische Zirkonoxide mit einer erhohten Lichtdurchlassigkeit oder zirkonoxidverstarkte Lithiumsilikatkeramiken (ZLS-Keramiken) fuhren dabei zu einer bestandigen Erweiterungen der zahnmedizinischen Behandlungsoptionen 2 3 .

Purpose This practice-based cross-sectional study aimed to investigate whether common risk indicators for peri-implant diseases were associated with peri-implant mucositis and peri-implantitis in patients undergoing supportive implant therapy (SIT) at least 5 years after implant restoration. Methods Patients exclusively restored with a single implant type were included. Probing pocket depth (PPD), bleeding on probing (BOP), suppuration, and radiographic bone loss (RBL) were assessed around implants. The case definitions were as follows: peri-implant mucositis: PPD ≥4 mm, BOP, no RBL; and peri-implantitis: PPD ≥5 mm, BOP, RBL ≥3.5 mm. Possible risk indicators were compared between patients with and without mucositis and peri-implantitis using the Fisher exact test and the Wilcoxon rank-sum test, as well as a multiple logistic regression model for variables showing significance (P, Graphical Abstract

Aim of this cross-sectional case-control study was the comprehensive examination of oral health, oral behaviour and oral health-related quality of life of patients with tongue piercing. Furthermore, different piercing related factors and the presence of habits should be considered regarding their potential association to piercing-related complications. Participants with tongue piercing (n = 50) and a matched control (n = 50) were included. Dental examination included decayed-, missing- and filled-teeth-index (DMF-T) and the presence of non-carious tooth defects. Periodontal examination contained of periodontal probing depth (PPD), bleeding on probing (BOP) and recession. Piercing-related factors, oral behaviour as well as oral health-related quality of life [German short form of oral health impact profile (OHIP G14)] were assessed based on questionnaires. Statistics: Man-Whitney U test, chi-square and Fisher’s exact test (significance level p

This study focused on the clinical investigation of the internal and marginal fit of CAD/CAM-fabricated zirconia single crowns produced via conventional and digital impression techniques. In a private practice, 20 molar teeth, one from each of 20 patients, were prepared with a circumferential 1.0-mm deep chamfer and an occlusal reduction of 1.5 mm. Conventional impression (CI) taking with a polyvinylsiloxane material (Aquasil Monophase + Aquasil XLV; Dentsply, Konstanz, Germany) and intraoral scanning (IS) (Cara TRIOS; Heraeus, Hanau, Germany) of each of the preparations was performed, and then two respective zirconia copings per tooth were produced (20 crowns per group). The marginal and internal fit of the restorations was evaluated employing a replica technique. For statistical analysis, a pairwise comparison (Wilcoxon rank test) was performed. Zirconia single crowns produced with the IS technique revealed a statistically significant better precision of internal fit only in specific areas (chamfer area/occlusal area). The evaluation of marginal fit showed no significant differences between the two groups. All restorations of both groups offered internal and marginal gaps within the postulated clinical tolerance ranges. CAD/CAM-fabricated zirconia single crowns produced with CI and IS techniques offer adequate marginal and internal precision. However, the IS technique provides lower internal gaps in some specific areas. The clinical precision of fit of restorations produced with a CI and an IS technique appeared to be equivalent. Therefore, the IS technique can be rated as a suitable alternative for the manufacturing of single crowns.

Purpose The aim of this retrospective cross-sectional study was to evaluate whether salivary findings of active matrix-metalloproteinase 8 (aMMP-8) chairside (point of care; POC) tests were associated with periodontal risk assessment parameters in patients receiving supportive periodontal therapy (SPT). Methods A total of 125 patients receiving regular SPT were included, and their records were examined. The following inclusion criteria were used: a diagnosis of chronic periodontitis, at least 1 non-surgical periodontal treatment (scaling and root planning) with following regular SPT (minimum once a year), at least 6 remaining teeth, and clinical and aMMP-8 findings that were obtained at the same appointment. In addition to anamnestic factors (e.g., smoking and diabetes), oral hygiene indices (modified sulcus bleeding index [mSBI] and approximal plaque index), periodontal probing depth simultaneously with bleeding on probing, and dental findings (number of decayed, missing, and filled teeth) were recorded. Salivary aMMP-8 levels were tested using a commercial POC test system (Periomarker, Hager & Werken, Duisburg, Germany). Statistical analysis was performed using the t-test, Mann-Whitney U test, Fisher's exact test, and χ2 test, as appropriate (P0.05). Conclusions Salivary aMMP-8 chairside findings were not associated with common parameters used for periodontal risk assessment in patients receiving SPT. The diagnostic benefit of POC salivary aMMP-8 testing in risk assessment and maintenance interval adjustment during SPT remains unclear., Graphical Abstract

Retrospective evaluation of the clinical performance of tooth-supported overdentures retained by resilient telescopic crowns with occlusal clearance fit (ODRTC) in severely reduced dentition (1–3 remaining teeth). A total of 313 ODRTCs were inserted in an undergraduate prosthodontic program (University Medical Center, Goettingen, Germany) between 2000 und 2012. Data regarding 263 ODRTCs in 221 patients were reevaluated (observational period: 64.5 ± 34.8 months), and time-dependent survival and success rates (Kaplan-Meier-Estimator) were calculated. The number of the abutment teeth was analyzed as an influencing factor (Cox regression model (p

PURPOSE To investigate the clinical survival and success rates of conventionally luted three- and four-unit fixed dental prostheses (FDPs) with zirconia frameworks (Cercon Smart Ceramics, DeguDent) after a mean observation period of 119 ± 36 months. MATERIALS AND METHODS A total of 75 patients were treated in the Department of Prosthodontics at the University of Goettingen, Germany, and a total of 99 posterior FDPs were inserted and luted with zinc phosphate cement. Time-dependent survival and success rates were calculated using Kaplan-Meier curves, and their relationships with the type of veneer (ceramic), location (maxilla vs mandible), and span length (three-unit vs four-unit) were analyzed with a Cox regression model (P < .05). RESULTS Of the 99 inserted FDPs, 24 were lost to follow-up, 51 remained functional and passed the 10-year examination (overall survival rate: 75.0%; 95% confidence interval [CI]: 0.64, 0.85), and 13 were absolute failures caused by technical events (technical survival rate: 84%; 95% CI: 0.64, 0.85). In 50 FDPs, relative failure required a clinical intervention to maintain function (overall success rate: 40%; 95% CI: 0.29, 0.52). For 35 of these FDPs, the relative failure was caused by technical events (technical success rate: 61%; 95% CI: 0.49, 0.73). None of the evaluated factors showed an association with overall or technical survival or success. CONCLUSION Zirconia-based posterior FDPs produced with a first-generation computer-assisted manufacturing (CAM) system revealed high rates of absolute and relative failure, mainly due to technical events, after a mean observational period of 10 years. Further clinical studies with updated computer-assisted design (CAD)/CAM systems are needed to determine the long-term performance of zirconia-based FDPs.

This study aimed at comparing the cytotoxicity of a new octenidine mouth rinse (MR) on gingival fibroblasts and epithelial cells using different established MRs. Octenidol (OCT), Chlorhexidine 0.2% (CHX), Meridol (MER), Oral B (OB), and control (PBS only) were used. Human primary gingival fibroblasts (HGFIBs) and human primary nasal epithelial cells (HNEPCs) were cultivated in cell-specific media (2 × 105 cells/well) and treated with a MR or PBS for 1, 5, and 15 min. All tests were performed in duplicate and repeated 12 times. The apoptosis and necrosis were determined using a Caspase-3/7 assay and LDH assay, respectively. The data were analyzed using two-way analysis of variance with subsequent Mann–Whitney U-test. No significant differences could be found between the incubation times of the MR, neither for apoptosis nor necrosis (p > 0.05). Regarding apoptosis of HGFIBs, MRs had no influence at all. In HNEPCs, OCT induced relevantly lower apoptosis than CHX (p = 0.01). Considering necrosis, MER showed the lowest numbers of necrotic HGFIBs and HNEPCs, whereas OB induced the highest number of necrotic cells. The differences between both MR were statistically relevant (p

The type of used rotating-oscillating toothbrush was incorrectly assigned; correct used rotating-oscillating toothbrush is Pro1000 Precision Clean, Procter&Gamble GmbH, Schwalbach, Germany.

This practice-based study evaluates the survival and success of conventionally luted metal-ceramic and zirconia molar crowns fabricated by using a prolonged cooling period for the veneering porcelain. Fifty-three patients were treated from 07/2008 to 07/2009 with either metal-ceramic crowns (MCC) or zirconia crowns (ZC). Forty-five patients (26 female) with 91 restorations (obser-vational period: 64.0 ± 4.8 months) participated in a clinical follow-up examination and were included in the study. Estimated cumulative survival (ECSv), success (ECSc) and veneering ceramic success (ECVCSc) were calculated (Kaplan-Meier) and analysed by the crown fabrication technique and the position of the restoration (Cox regression model) (P < 0.05). Five complete failures (MCC: 2, ZC: 3) were recorded (5-year ECSv: MCC: 97.6%, (95% confidence interval (95%-CI): [93%; 100%]/ZC: 94.0%, (95%-CI): [87%; 100%]). Of the MCCs (n = 41), 85.0%, [95%-CI: (77%; 96%)] remained event-free, whereas the ECSc for the ZCs (n = 50) was 74.3% (95%-CI): [61%; 87%]. No significant differences in ECSv (P = 0.51), ECSc (P = 0.43) and ECVCSc (P = 0.36) were detected between the two fabrication techniques. Restorations placed on terminal abutments (n = 44) demonstrated a significantly lower ECVCSc (P = 0.035), (5-year VCF-rate: 14.8%) than crowns placed on tooth-neighboured abutments (n = 47), (5-year VCF-rate: 4.3%). In the present study, zirconia molar crowns demonstrated a 5-year ECSv, ECSc and ECVCSc comparable to MCCs. Irrespective of the fabrication technique, crowns on terminal abutments bear a significantly increased risk for VCFs. Clinical investigations with an increased number of restorations are needed.

The chairside fabrication of a monolithic partial crown using a zirconia-reinforced lithium silicate (ZLS) ceramic is described. The fully digitized model-free workflow in a dental practice is possible due to the use of a powder-free intraoral scanner and the computer-aided design/computer-assisted manufacturing (CAD/CAM) of the restorations. The innovative ZLS material offers a singular combination of fracture strength (>370 Mpa), optimum polishing characteristics, and excellent optical properties. Therefore, this ceramic is an interesting alternative material for monolithic restorations produced in a digital workflow.

Statement of the Problem The clinical performance of ceramic veneers is influenced by various clinical and material-related factors. Purpose Retrospective evaluation of extensive anterior ceramic veneers in the upper and lower jaw 36 months after placement in a private practice. Materials and Methods Thirty-seven patients (21 female, 16 male) were restored with adhesively luted extensive ceramic veneers made from a heat-pressed ceramic (Cergo, DeguDent, Hanau, Germany). One dentist restored a total of 130 teeth (maxilla N = 76, mandible N = 54). Adhesive cementation was performed with an etch-and-rinse adhesive (Optibond FL, Kerr Hawe, Karlsruhe, Germany) and a dual-curing composite cement. Results After 36 months, the survival rate (in situ criteria) according to Kaplan–Meier was 95.1% (95% confidence interval [CI]: 0.88; 1). Reasons for failure were four ceramic fractures and one biological failure in five restored teeth. Of the restorations, 92.8% (95% CI: 0.86;1) were in service without any clinical intervention and rated successful after 36 months. Interventions were necessary in five cases (three recementations, two endodontic treatments). Clinical performance was not influenced by the veneer position (maxillar/mandibular, survival p = 0.3/success p = 0.4). Veneers with more than 50% of exposed dentin demonstrated a significantly increased risk (hazard ratio 10.6, p = 0.026) for a clinical intervention (recementation, endodontic treatment), whereas no effect on the survival rate could be detected (p = 0.17). Conclusions After 36 months of clinical service, extensive veneer restorations made of a pressable ceramic showed a comparable survival and success rate in the upper and lower jaw. Large areas of exposed dentin (>50%) were associated with lower success rates. Clinical Significance Mandibular ceramic veneers made using a heat-pressed ceramic offer the same clinical reliability as do veneers on anterior maxillary teeth. Dentin exposure significantly affects the clinical performance of heat-pressed ceramic veneers.

Background Different concepts regarding the number of implants and attachment systems for the preparation of implant-supported over-dentures (IODs) have been discussed. Nonetheless, long-term results for double-crown-retained IODs with an observational period of more than 10 years are still rare in the literature. Objective The aim of this practice-based study was to retrospectively evaluate the long-term clinical outcome (success/survival rates, technical/biological complications) of IODs retained by double crowns. Material and methods In a private practice, 36 non-smoking edentulous patients were restored between 1991 and 2002 with double-crown-retained IODs supported by 2–6 implants. For the retrospective evaluation of implant and prosthetic survival (in-situ criterion) and success (event-free observational period), only those patients were included who regularly (at least once a year) participated in a professional maintenance programme and who had a functional period for the restoration of more than 10 years. Results Twenty-two patients (12 Women/10 men, mean age 60.1 ± 9.8 years) with 89 implants supporting nine maxillary and 13 mandibulary dentures (mean number of implants/prosthesis = 4) met the inclusion criteria. The mean follow-up period was 14.1 ± 2.8 years. One implant failed after 4.9 years (cumulative-survival rate: 98.9%). Seven implants in two patients showed peri-implantitis (prevalence: patient-based = 9.1%/implant-based = 8%). Five dentures were renewed (prosthetic-survival rate 77.3% Maintenance procedures (i.e. screw loosening or acrylic fractures) were required at a rate of 0.31/year and patient. Conclusion This study indicates that IODs retained with double crowns offer predictable long-term performance with a limited incidence of biological and technical complications.

This study compared the cytotoxicity of a new octenidine mouth rinse (MR) against gingival fibroblasts and epithelial cells with different established MRs.The following MRs were used: Octenidol (OCT), Chlorhexidine 0.2% (CHX), Listerine (LIS), Meridol (MER), Betaisodona (BET); and control (medium only). Human primary gingiva fibroblasts and human primary nasal epithelial cells were cultivated in cell-specific media (2 × 10(5) cells/ml) and treated with MR for 1, 5, and 15 min. Each test was performed 12 times. Metabolism activity was measured using a cytotoxicity assay. A cellometer analyzed cell viability, cell number, and cell diameter. The data were analyzed by two-way analysis of variance with subsequent Dunnett's test and additional t-tests.The cytotoxic effects of all MRs on fibroblasts and epithelial cells compared to the control depended on the contact time (p0.001). OCT and BET showed less influence on cell metabolism in fibroblasts than other MRs. OCT also demonstrated comparable but not significant results in epithelial cells (p0.005). Cell numbers of both cell types at all contact times revealed that OCT showed a less negative effect (p0.005), especially for epithelial cells compared to CHX after 15 min (p0.005). OCT and BET showed the best results for viability in fibroblasts (p0.005), but MER showed less influence than OCT in epithelial cells (p0.005).OCT is a potential alternative to CHX regarding cytotoxicity because of its lower cell-toxic effect against fibroblasts and epithelial cells.

The aim of this study was to evaluate tooth and periodontal damage in subjects wearing a tongue piercing (TP) in comparison to matched control subjects without tongue piercing. Members of the German Federal Armed Forces who had TP (group TP) and a matched control group (group C) volunteered to take part in the study. The time in situ, localization and material of TP were documented. Dental examinations included DMF-T, oral hygiene, enamel fissures (EF), enamel cracks (EC) and recessions. Statistical analysis was determined by χ 2 test and the t test. Both groups had 46 male subjects (mean age 22.1 years). The piercings had been in situ for 3.8 ± 3.1 years. Subjects in the TP group had a total of 1,260 teeth. Twenty-nine subjects had 115 teeth (9.1%) with EF (67% lingual). In group C (1,243 teeth), 30 subjects had 60 teeth with EF (4.8%, 78% vestibular) (p

Objectives: Evaluation of the prevalence rates of periimplant mucositis and periimplantitis in partially edentulous patients in a private dental practice. Material and methods: The data of 89 patients were collected (52 female, 37 male, age at time of implant placement: 51.8±10.3 years). All patients had been treated with dental implants of the same type and fixed superstructures between January 1999 and June 2006 (observational period: 68.2±24.8 months). Results: The patient-related prevalence rate of periimplant mucositis (probing depth ≥4 mm and bleeding on probing [BOP]) was over all 44.9%. The respective rates in non-smokers without periodontal history were 30.4% and in smokers with periodontal history 80%. The multiple logistic regression analysis identified a significant association of mucositis with the independent variable “smoker” (odds ratio [OR] 3.77; P=0.023). The patient-related prevalence rate of periimplantitis (probing depth ≥5 mm, BOP/pus, radiographic bone loss) was 11.2% (smokers with periodontal history: 53.3%, non-smokers: 2.8%). No periimplant disease was diagnosed in non-smoking patients without periodontal history and with a good compliance after treatment. Statistical analysis identified a significant association of periimplantitis with “smoker” (OR: 31.58; P

The aim of this study was to compare the microbial analysis methods of polymerase chain reaction (PCR) and real-time PCR (RT-PCR) in terms of detection of five selected potentially periodontal pathogenic bacteria in peri-implant disease. Therefore 45 samples of healthy, mucositis and peri-implantitis (n = 15 each) were assessed according to presence of the following bacteria using PCR (DNA-strip technology) and RT-PCR (fluorescent dye SYBR green-system): Aggregatibacter actinomycetemcomitans (Aa), Porphyromonas gingivalis (Pg), Treponema denticola (Td), Tanerella forsythia (Tf), and Fusobacterium nucleatum (Fn). There were no significant correlations between the bacterial and disease patterns, so the benefit of using microbiological tests for the diagnosis of peri-implant diseases is questionable. Correlations between the methods were highest for Tf (Kendall's Tau: 0.65, Spearman: 0.78), Fn (0.49, 0.61) and Td (0.49, 0.59). For Aa (0.38, 0.42) and Pg (0.04, 0.04), lower correlation values were detected. Accordingly, conventional semi-quantitative PCR seems to be sufficient for analyzing potentially periodontal pathogenic bacterial species.

Purpose In this prospective clinical study, the performance of three- and four-unit fixed partial dentures (FPDs) with frameworks fabricated of yttria partially stabilized zirconia was determined after a mean observation period of 50 months. The study focused on the survival of the restoration (in situ criterion) and the success of the ceramic veneers (no defect). Materials and methods Seventy-five patients with a maximum of two missing teeth and an antagonistic dentition were treated at the Department of Prosthodontics, University of Goettigen, with 99 posterior FPDs. Fifty-one specimens (experimental group) were veneered with an experimental ceramic suitable for titanium and zirconia frameworks (thermal expansion coefficient [TEC]: 8.5 microm/m*K); 48 restorations (Ceram-S group) were veneered with a commercially available low-fusing ceramic optimized for zirconia frameworks (TEC: 9.5 microm/m*K). All restorations were luted with zinc-phosphate cement. Statistical analysis was performed according to the Kaplan-Meier method; time-dependent success rates of the different types of ceramic veneers were analyzed using the log-rank test. Results Seven restorations were lost: 4 due to technical complications and 3 due to biologic complications. The overall survival rate after 48 months was 94% (Kaplan-Meier analysis). Twenty-three events required clinical intervention for restoration maintenance: 13 ceramic veneer chippings (polishing), 6 losses of retention (recementation), 3 caries lesions (filling therapy), and 1 loss of vitality (endodontic treatment). Between the two groups of veneering materials, no significant difference in the probability for success was determined (log-rank test, P=.81). Conclusions Within a mean observation period of 4 years, sufficient survival rates for zirconia-based posterior FPDs could be verified. The main complications included fracture of the ceramic veneering material and decementation, which occurred mainly in the mandible.

Summary This practice-based study evaluates the clinical performance of conventionally luted metal–ceramic and zirconia molar crowns fabricated with pronounced anatomical core design and a prolonged cooling period of the veneering porcelain. Fifty-three patients were treated from 07/2008 until 07/2009 with either metal–ceramic crowns (MCC) (high-noble alloy + low-fusing porcelain) or zirconia crowns (Cercon System, DeguDent, Germany). Forty-nine patients (30 women/19 men) with 100 restorations (metal–ceramic: 48/zirconia: 52, mean observational period: 36·5 ± 6 months) participated in a clinical follow-up examination and were included in the study. Time-dependent survival (in situ criteria), success (event-free restorations) and chipping rates (defects of the veneering ceramics) were calculated according to the Kaplan–Meier method and analysed in relation to the crown fabrication technique, using a Cox regression model (P

We are pleased that our publication found your interest and we considered your letter. Accordingly, here is our response to the letter to the editor, “Design and analytical issues: a response to ‘Long-term effects of tongue piercing—a case control study.’”

Copy-milled, all-ceramic crowns were produced in a clinical setting. The advantages of this new technique are shortening of processing time and reduction in defects during processing through the use of an industrially prefabricated material.

Background The periodontal screening index (PSI) is an element of the initial dental examination. The PSI provides information on the periodontal situation and allows a first estimation of the treatment required. The dental panoramic tomography (DPT) indicates the proximal bone loss, thus also allowing conclusions on the periodontal situation. In this study, the results of both methods in determining the periodontal situation are compared. Methods The clinical examination covered DMF-T, QHI, and PSI scores at four proximal sites per tooth; the examining dentist was unaware of the radiographic finding. Based on the PSI scores, the findings were diagnosed as follows: score 0 - 2 "no periodontitis", score 3 and 4 "periodontitis". Independent of the locality and time of the clinical evaluation, two dentists examined the DPTs of the subjects. The results were classified as follows: no bone loss = "no periodontitis", and bone loss = "periodontitis". Results 112 male subjects (age 18 to 58, Ø 37.7 ± 8 years) were examined. Regarding the PSI, 17 subjects were diagnosed "no periodontitis" and 95 subjects "periodontitis". According to the evaluation of the DPTs, 70 subjects were diagnosed "no periodontitis" and 42 "periodontitis". A comparison of both methods revealed that the diagnosis "no periodontitis" corresponded in 17 cases and "periodontitis" in 42 cases (53%). In 47% (53 cases) the results were not congruent. The difference between both methods was statistically significant (p < 0.001; kappa = 0.194). Conclusion The present study shows that the initial assessment of the periodontal situation significantly depends on the method of evaluation.