Search

Objective: To investigate the prevalence of rotator cuff and long head of the biceps pathologies in manual wheelchair (MWC) users with spinal cord injury (SCI). Design: Cross-sectional study. Setti...

Background: Manual wheelchair (MWC) users with spinal cord injuries (SCI) are at a significantly higher risk of experiencing rotator cuff pathology than able-bodied individuals. A deeper understanding of where the arm is used dynamically within the humeral workspace during daily life may help explain why MWC users have higher shoulder pathology rates than able-bodied individuals. The purpose of this study was to report the daily percentage and consecutive durations MWC users and matched able-bodied individuals (controls) spent static and dynamic across the humeral elevation workspace.Methods: MWC users with SCI and controls wore three inertial measurement units on their bilateral arms and torso for 1 or 2 days. The percentages of time and average consecutive duration individuals were static or dynamic while in five humeral elevation ranges (0–30°, 30–60°, 60–90°, 90–120°, and >120°) were calculated and compared between cohorts.Results: Forty-four MWC users (10 females, age: 42.8 ± 12.0, time since injury: 12.3 ± 11.5) and 44 age- and sex-matched controls were enrolled. The MWC cohort spent significantly more time dynamic in 60–90° (p = 0.039) and 90–120° (p = 0.029) and had longer consecutive dynamic periods in 30–60° (p = 0.001), 60–90° (p = 0.027), and 90–120° (p = 0.043) on the dominant arm. The controls spent significantly more time dynamic in 0–30° of humeral elevation (p < 0.001) on both arms. Although the average consecutive static durations were comparable between cohorts across all humeral elevation ranges, the MWC cohort spent a significantly higher percentage of their day static in 30–60° of humeral elevation than controls (dominant: p = 0.001, non-dominant: p = 0.01). The MWC cohort had a moderate association of increased age with decreased time dynamic in 30–60° for both arms.Discussion: Remote data capture of arm use during daily life can aid in understanding how arm function relates to shoulder pathology that follows SCI and subsequent MWC use. MWC users spent more time dynamic in higher elevations than controls, and with age, dynamic arm use decreased in the 30–60° humeral elevation range. These results may exemplify effects of performing activities from a seated position and of age on mobility.

Arm use in manual wheelchair (MWC) users is characterized by a combination of overuse and a sedentary lifestyle. This study aimed to describe the percentage of daily time MWC users and able-bodied individuals spend in each arm use intensity level utilizing accelerometers. Arm use intensity levels of the upper arms were defined as stationary, low, mid, and high from the signal magnitude area (SMA) of the segment accelerations based on in-lab MWC activities performed by eight MWC users. Accelerometry data were collected in the free-living environments from forty MWC users and 40 sex- and age-matched able-bodied individuals. The SMA intensity levels were applied to the free-living data and the percentage of time spent in each level was calculated. The SMA intensity levels were defined as, stationary: ≤0.67 g, low: 0.671–3.27 g, mid: 3.27–5.87 g, and high: &gt, 5.871 g. The dominant arm of both MWC users and able-bodied individuals was stationary for most of the day and less than one percent of the day was spent in high intensity arm activities. Increased MWC user age correlated with increased stationary arm time (R = 0.368, p = 0.019). Five and eight days of data are needed from MWC users and able-bodied individuals, respectively, to achieve reliable representation of their daily arm use intensities.

Importance: Constraint-induced movement therapy (CIMT) is a common treatment for children with unilateral cerebral palsy (CP). Although clinic-based assessments have demonstrated improvements in arm function after CIMT, whether these changes are translated and sustained outside of a clinic setting remains unclear. Objective: Accelerometers were used to quantify arm movement for children with CP 1 wk before, during, and 4 wk or more after CIMT; measurements were compared with those from typically developing (TD) peers. Design: Observational. Setting: Tertiary hospital and community. Participants: Seven children with CP (5 boys, 2 girls; average [AVE] age ± standard deviation [SD] = 7.4 ± 1.2 yr) and 7 TD peers (2 boys, 5 girls; AVE age ± SD = 7.0 ± 2.3 yr). Intervention: 30-hr CIMT protocol. Outcomes and Measures: Use ratio, magnitude ratio, and bilateral magnitude were calculated from the accelerometer data. Clinical measures were administered before and after CIMT, and parent surveys assessed parent and child perceptions of wearing accelerometers. Results: During CIMT, the frequency and magnitude of paretic arm use among children with CP increased in the clinic and in daily life. After CIMT, although clinical scores showed sustained improvement, the children’s accelerometry data reverted to baseline values. Children and parents in both cohorts had positive perceptions of accelerometer use. Conclusions and Relevance: The lack of sustained improvement in accelerometry metrics after CIMT suggests that therapy gains did not translate to increased movement outside the clinic. Additional therapy may be needed to help transfer gains outside the clinic. What This Article Adds: Accelerometer measurements were effective at monitoring arm movement outside of the clinic during CIMT and suggested that additional interventions may be needed after CIMT to sustain benefits.

Background Accelerometers provide a new method to objectively measure recovery of movement and physical activity in patients following reverse total shoulder arthroplasty (RTSA) and may overcome common limitations associated with patient-reported outcome measures (PROMs). The aim of this study was to assess changes in upper limb movement using accelerometers following RTSA and investigate their association with other clinical outcome measures. Methods Thirty-six patients who underwent RTSA wore accelerometers on both wrists and arms for 3 days at 3, 6, and 12 months postsurgery. PROMs (Constant score, American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form, visual analog scale for pain, Single Assessment Numerical Evaluation, Shoulder Activity Level) and isometric shoulder strength were also assessed. Accelerometer outcomes were calculated to quantify counts of forearm and arm activity and the contribution of both arms to activity (limb symmetry and magnitude ratio). Changes and differences in all clinical measures and objective movement measures were evaluated with within-subjects analysis of variance. Correlations between limb activity and other clinical measures were investigated using Spearman correlation coefficients. Results Objective movement of the operated arm increased from 3-6 months postsurgery (P = .004), but not from 6-12 months (P = .240). Limb asymmetries were observed at 3 and 6 months and improved by 12 months postsurgery. No associations were demonstrated between PROMs and objective upper limb movement at 12 months postsurgery. Discussion Despite early recovery of function and pain relief assessed by PROMs, objective movement using accelerometers showed delayed recovery of the operated arm postoperatively, before normalizing by 12 months postsurgery. Accelerometers provide a unique insight into functional recovery following RTSA.

Shoulder pain is common in manual wheelchair (MWC) users. Overuse is thought to be a major cause, but little is known about exposure to activities of daily living (ADLs). The study goal was to develop a method to estimate three conditions in the field: (1) non-propulsion activity, (2) MWC propulsion, and (3) static time using an inertial measurement unit (IMU). Upper arm IMU data were collected as ten MWC users performed lab-based MWC-related ADLs. A neural network model was developed to classify data as non-propulsion activity, propulsion, or static, and validated for the lab-based data collection by video comparison. Six of the participants’ free-living IMU data were collected and the lab-based model was applied to estimate daily non-propulsion activity, propulsion, and static time. The neural network model yielded lab-based validity measures ≥0.87 for differentiating non-propulsion activity, propulsion, and static time. A quasi-validation of one participant’s field-based data yielded validity measures ≥0.66 for identifying propulsion. Participants’ estimated mean daily non-propulsion activity, propulsion, and static time ranged from 158 to 409, 13 to 25, and 367 to 609 min, respectively. The preliminary results suggest the model may be able to accurately identify MWC users’ field-based activities. The inclusion of field-based IMU data in the model could further improve field-based classification.

ImportanceConstraint Induced Movement Therapy (CIMT) is a common treatment for children with unilateral cerebral palsy (CP). While clinic-based assessments have demonstrated improvements in arm function after CIMT, quantifying if these changes are translated and sustained outside of a clinic setting remains unclear.ObjectiveAccelerometers were used to quantify arm movement for children with CP one week before, during, and 4+ weeks after CIMT and compared to typically-developing (TD) peers.DesignObservational during CIMTSettingClinical assessments and treatment occurred in a tertiary hospital and accelerometry data were collected in the communityParticipants7 children with CP (5m/2f, 7.4 ± 1.2 yrs) and 7 TD peers (2m/5f, 7.0 ± 2.3 yrs)Intervention30-hour CIMT protocolOutcomes and MeasuresThe use ratio, magnitude ratio, and bilateral magnitude were calculated from the accelerometry data. Clinical measures were evaluated before and after CIMT and surveys were used to assess the feasibility of using accelerometers.ResultsBefore CIMT, children with CP used their paretic arm less than their TD peers. During therapy, their frequency and magnitude of paretic arm use increased in the clinic and in daily life. After therapy, although clinical scores improved, children reverted to baseline accelerometry values. Additionally, children and parents in both cohorts had positive perceptions of wearing accelerometers.Conclusions and RelevanceThe lack of sustained improved accelerometry metrics following CIMT suggest therapy gains did not translate to increased movement outside the clinic. Additional therapy may be needed to help the transfer of skills to the community setting.What this Article AddsThis study compares the movement of children with CP undergoing CIMT in the community setting with their typically developing peers. Additional interventions may be needed in combination with or following CIMT to sustain the benefits of the therapy outside of the clinic.

PURPOSE OF REVIEW: The purpose of this article was to describe the utilization of body worn activity monitors in the SCI population and discuss the challenges of using body worn sensors in rehabilitation research. RECENT FINDINGS: Many activity monitor-based measures have been used and validated in the SCI population including stroke number, push frequency, upper limb activity counts and wheelchair propulsion distance measured from a sensor attached to the wheelchair. SUMMARY: The ability to accurately measure physical activity in the free-living environment using body-worn sensors has the potential to enhance the understanding of barriers to adequate activity and identify possible effective interventions. As the use of activity monitors used in SCI rehabilitation research continues to grow, care must be taken to overcome challenges related to participant adherence and data quality.

Go Baby Go is a community-based outreach, research, and clinical treatment program that works with families, clinicians, service providers and industry to provide pediatric equipment to children with disabilities for movement, mobility and socialization. The purpose of the current technical report is to describe two innovative and novel extensions of the initial modified ride-on car technology that encourages self-directed mobility, participation and function for young children with disabilities. The current report provides a description of the ‘sit-to-stand’ and ‘throw-baby-throw’ ride-on car technologies: (1) Sit-to-stand modified ride-on car technology: Commercially available, battery-operated, ride-on cars are adapted by installing a large, easy-to-press activation switch that is placed on the steering wheel. The switch has a large surface area and turns on at the slightest touch allowing easier activation for children with disabilities. Common materials such as PVC pipe, swimming kickboards and fun noodles, and Velcro are used to build a custom seating system that provides optimum support for each child. There are no commercially available powered wheelchairs for children with disabilities from birth to three years old. An innovative sit-to-stand version of modified ride-on car will be presented and requires a child to stand up in order to activate the switch to encourage the physical skills of pulling from sit-to-stand, weight bearing, and balance; (2) Throw-baby-throw technology: Children with disabilities that experience limited upper-extremity function are not able to throw an object. The throw-baby-throw technology includes modification of a commercially available, toy-based ball pitching’ machine that projects foam balls to. We modified the toy so that it is switch activated and attached to a modified ride-on car. Our modified throwing device allows children with disabilities to engage in the fundamental motor skill of throwing. Both technologies presented in this technical report embrace the holistic view of the International Classification of Functioning, Disability, and Health framework by placing equal emphasis on the body structure and function, activity, and participation domains. Both technologies specifically target the advancement of physical skills while simultaneously providing opportunities to engage in experiences associated with activity and participation.