Search

Next-generation sequencing (NGS) has been widely adopted for clinical HLA typing and advanced immunogenetics researches. Current methodologies still face challenges in resolving cis-trans ambiguity involving distant variant positions, and the turnaround time is affected by testing volume and batching. Nanopore sequencing may become a promising addition to the existing options for HLA typing. The technology delivered by the MinION sequencer of Oxford Nanopore Technologies (ONT) can record the ionic current changes during the translocation of DNA/RNA strands through transmembrane pores and translate the signals to sequence reads. It features simple and flexible library preparations, long sequencing reads, portable and affordable sequencing devices, and rapid, real-time sequencing. However, the error rate of the sequencing reads is high and remains a hurdle for its broad application. This review article will provide a brief overview of this technology and then focus on the opportunities and challenges of using nanopore sequencing for high-resolution HLA typing and immunogenetics research.

Third-generation sequencing is able to read full-length transcripts and thus to efficiently identify RNA molecules and transcript isoforms, including transcript length and splice isoforms. In this study, we report the time-course profiling of the effect of bovine alphaherpesvirus type 1 on the gene expression of bovine epithelial cells using direct cDNA sequencing carried out on MinION device of Oxford Nanopore Technologies. These investigations revealed a substantial up- and down-regulatory effect of the virus on several gene networks of the host cells, including those that are associated with antiviral response, as well as with viral transcription and translation. Additionally, we report a large number of novel bovine transcript isoforms identified by nanopore and synthetic long-read sequencing. This study demonstrates that viral infection causes differential expression of host transcript isoforms. We could not detect an increased rate of transcriptional readthroughs as described in another alphaherpesvirus. According to our knowledge, this is the first report on the use of LoopSeq for the analysis of eukaryotic transcriptomes. This is also the first report on the application of nanopore sequencing for the kinetic characterization of cellular transcriptomes. This study also demonstrates the utility of nanopore sequencing for the characterization of dynamic transcriptomes in any organisms.

Lynch syndrome is a hereditary disease characterized by an increased risk of colorectal and other cancers. Germline variants in the mismatch repair (MMR) genes are responsible for this disease. Previously, we screened the MMR genes in colorectal cancer patients who fulfilled modified Amsterdam II criteria, and multiplex ligation-dependent probe amplification (MPLA) identified 11 structural variants (SVs) of MLH1 and MSH2 in 17 patients. In this study, we have tested the efficacy of long read-sequencing coupled with target enrichment for the determination of SVs and their breakpoints. DNA was captured by array probes designed to hybridize with target regions including four MMR genes and then sequenced using MinION, a nanopore sequencing platform. Approximately, 1000-fold coverage was obtained in the target regions compared with other regions. Application of this system to four test cases among the 17 patients correctly mapped the breakpoints. In addition, we newly found a deletion across an 84 kb region of MSH2 in a case without the pathogenic single nucleotide variants. These data suggest that long read-sequencing combined with hybridization-based enrichment is an efficient method to identify both SVs and their breakpoints. This strategy might replace MLPA for the screening of SVs in hereditary diseases.

The identification of gene fusions is a cornerstone of diagnosis and treatment decision making for tumors of many forms and primary sites. Diverse molecular approaches are currently used for the molecular diagnosis of fusions, but few permit broad, partner agnostic detection of fusions over multiple potential targets. We previously described the combination of nanopore sequencing with the anchored multiplex PCR technique to permit a rapid testing paradigm. Recently, a new platform for nanopore sequencing has become publicly available, the Flongle flow cell from Oxford Nanopore Technologies, which offers lower throughput, but lower price testing. Here, we describe the results of retesting of 15 specimens previously tested with both Illumina and Oxford Nanopore Technologies MinION sequencing. Furthermore, we additionally blindly tested 13 specimens that had undergone clinical Illumina-based sequencing. The Flongle sequencing pipeline removed key complexities of a multiplexed nanopore sequencing protocol, reduced sequencing turnaround time, and showed excellent concordance with Illumina results. It was particularly strong in identifying notoriously difficult to detect CIC-DUX4 translocations. The Flongle sequencing pipeline may be the assay of choice for deployment in small- to medium-sized molecular laboratories.

Although easily collected in large numbers, the subsequent processing and identification of zooplankton have usually been a barrier to large-scale biodiversity assessments. Therefore, DNA barcoding has been increasingly used by non-taxonomists to identify specimens. Here, we studied the community composition of zooplankton in the Belgian part of the North Sea over the course of 1 year. We identified zooplankton using both a traditional approach based on morphological characteristics and by metabarcoding of a 650 bp fragment of the V4-V5 region of the 18S rRNA gene using nanopore sequencing. Using long rDNA sequences, we were able to identify several taxa at the species level, across a broad taxonomic scale. Using both methods, we compared community composition and obtained diversity metrics. Diversity indices were not significantly correlated. Metabarcoding allowed for comparisons of diversity and community composition, but not all groups were successfully sequenced. Additionally, some disparities existed between relative abundances of the most abundant taxa based on traditional counts and those based on sequence reads. Overall, we conclude that for zooplankton samples, metabarcoding is capable of detecting taxa with a higher resolution, regardless of developmental stage of the organism. Combination of molecular and morphological methods results in the highest detection and identification levels of zooplankton.

The COVID-19 pandemic has spread to almost every country in the world since it started in China in late 2019. Controlling the pandemic requires a multifaceted approach including whole genome sequencing to support public health interventions at local and national levels. One of the most widely used methods for sequencing is the ARTIC protocol, a tiling PCR approach followed by Oxford Nanopore sequencing (ONT) of up to 96 samples at a time. There is a need, however, for a flexible, platform agnostic, method that can provide multiple throughput options depending on changing requirements as the pandemic peaks and troughs. Here we present CoronaHiT, a method capable of multiplexing up to 96 small genomes on a single MinION flowcell or >384 genomes on Illumina NextSeq, using transposase mediated addition of adapters and PCR based addition of barcodes to ARTIC PCR products. We demonstrate the method by sequencing 95 and 59 SARS-CoV-2 genomes for routine and rapid outbreak response runs, respectively, on Nanopore and Illumina platforms and compare to the standard ARTIC LoCost nanopore method. Of the 154 samples sequenced using the three approaches, genomes with ≥ 90% coverage (GISAID criteria) were generated for 64.3% of samples for ARTIC LoCost, 71.4% for CoronaHiT-ONT, and 76.6% for CoronaHiT-Illumina and have almost identical clustering on a maximum likelihood tree. In conclusion, we demonstrate that CoronaHiT can multiplex up to 96 SARS-CoV-2 genomes per MinION flowcell and that Illumina sequencing can be performed on the same libraries, which will allow significantly higher throughput. CoronaHiT provides increased coverage for higher Ct samples, thereby increasing the number of high quality genomes that pass the GISAID QC threshold. This protocol will aid the rapid expansion of SARS-CoV-2 genome sequencing globally, to help control the pandemic.

Next-generation sequencing technologies have aided molecular detection and diagnosis of plant pathogens. Short read sequencing technologies can be expensive, time consuming, and lack portability. The Oxford Nanopore Technologies (ONT) MinION sequencer offers plant diagnosticians an alternative for whole-genome and transcriptome sequencing with the advantages of portability, rapid results and access to sequences generated, and relatively low cost. Although this company offers multiple sequencing products, most previous articles focused on comparing this technology with other sequencing technology (Sanger, Illumina) and not comparing ONT product performance. In this project, we explored the potential of using ONT’s kits without modifications for the sequencing of plant pathogens. We compared the performance of DNA library preparation protocols (1D versus 1D2 versus Rapid) and RNA library preparation protocols (cDNA PCR Sequencing versus Direct RNA) on the MinION sequencer and examined different data analysis approaches for two well-characterized plant pathogens of agricultural concern, Ralstonia solanacearum and plum pox virus. For bacterial DNA sequencing, the Rapid Sequencing kit had the lowest throughput but offered the shortest sample-to-sequence turnaround time. The cDNA PCR Sequencing kit was better suited for plant RNA viruses than the Direct RNA. Whole-genome assemblies using all tested kits provided accurate identification of the target pathogen when pure cultures or infected plant material was used. This technology offers a shorter sample-to-sequence timeline than previous technologies for both DNA and RNA samples. Data analysis can still be time- and resource-consuming, but we found that 1 h of data generation was sufficient for accurate identification of the target pathogens, which can alleviate computing resources because a full 48-h run of sequencing data is not required. With the decreasing costs of flow cells, MinION is now an additional tool to be considered by plant diagnosticians for whole-genome and transcriptome-based diagnostics.

RNA viruses rapidly mutate, which can result in increased virulence, increased escape from vaccine protection, and false negative detection results. Targeted detection methods have a limited ability to detect unknown viruses and often provide insufficient data to detect coinfections or identify antigenic variants. Random, deep sequencing is a method that can more fully detect and characterize RNA viruses and is often coupled with molecular techniques or culture methods for viral enrichment. Viral culture coupled with third-generation sequencing were tested for the ability to detect and characterize RNA viruses. Cultures of bovine viral diarrhea virus, canine distemper virus, epizootic hemorrhagic disease virus, infectious bronchitis virus, two influenza A viruses, and porcine respiratory and reproductive syndrome virus were sequenced on the MinION platform using a random, reverse primer in a strand-switching reaction, coupled with PCR-based barcoding. Reads were taxonomically classified and used for reference-based sequence building using a stock personal computer. This method accurately detected and identified complete coding sequence genomes with a minimum of 20× coverage depth for all seven viruses, including a sample containing two viruses. Each lineage-typing region had at least 26× coverage depth for all viruses. Furthermore, analyzing the canine distemper virus sample through a pipeline devoid of canine distemper virus reference sequences modeled the ability of this protocol to detect unknown viruses. These results show the ability of this technique to detect and characterize dsRNA, negative- and positive-sense ssRNA, nonsegmented, and segmented RNA viruses.

Objective We designed and tested a Nanopore sequencing panel for direct tuberculosis drug resistance profiling. The panel targeted 10 resistance-associated loci. We assessed the feasibility of amplifying and sequencing these loci from 23 clinical specimens with low bacillary burden. Results At least 8 loci were successfully amplified from the majority for predicting first- and second-line drug resistance (14/23, 60.87%), and the 12 specimens yielding all 10 targets were sequenced with Nanopore MinION and Illumina MiSeq. MinION sequencing data was corrected by Nanopolish and recurrent variants were filtered. A total of 67,082 bases across all consensus sequences were analyzed, with 67,019 bases called by both MinION and MiSeq as wildtype. For the 41 single nucleotide variants (SNVs) called by MiSeq with 100% variant allelic frequency (VAF), 39 (95.1%) were called by MinION. For the 22 mixed bases called by MiSeq, a SNV with the highest VAF (70%) was called by MinION. With short assay time, reasonable reagent cost as well as continuously improving sequencing chemistry and signal correction pipelines, this Nanopore method can be a viable option for direct tuberculosis drug resistance profiling in the near future.

Fisheries enforcement relies on visual catch identification and quantification at sea or when landed. Silage (fish dissolved in acid) and fish blocks (block frozen fish) are promising methods for on-board processing and storage of low-value catches. We examined the use of non-destructive sampling and two DNA-based methods, quantitative PCR (qPCR) and metabarcoding, to assess species composition and relative abundance in industrial grade experimental silage and fish blocks. We demonstrate the ability to identify and quantify DNA from fish species in both products. qPCR analysis of small silage samples collected over 21 days detected all target control species. DNA from one species (Atlantic wolffish) was consistently overrepresented while, for three species of gadoids (Atlantic cod, haddock and whiting), the DNA content matched input tissue proportions with high accuracy. qPCR and metabarcoding of fish blocks, sampled as run-off water and exterior swabs, provided consistent species detection, with the highest variance observed in quantification from swab samples. Our analysis shows that DNA-based methods have significant potential as a tool for species identification and quantification of complex on-board-processed seafood products and are readily applicable to taxonomically and morphologically similar fish. There is, however, a need for establishing DNA/weight calibration factors for primary fisheries species.

Objective of the study was to conduct whole-genome sequencing of the vaccine strain Francisella tularensis 15 NIIEG and determine, based on the results, its phylogenetic relationships and the genetic organization features.Materials and methods. Whole-genome sequencing of F. tularensis 15 NIIEG strain was performed on Ion PGM (Ion Torrent, USA) and MinIon (Oxford Nanopore Technologies, UK) platforms. Alignment of readings obtained to the whole-genome of F. tularensis subsp. holarctica LVS (CP009694, USA, 2015) was performed using the software package DNASTAR Lasergene 15.3. Hybrid assembly of reads into contigs was performed by means of Unicycler v. 0.4.4, using data obtained by semiconductor sequencing technology (Ion PGM) and nanopore sequencing (MinIon). Phylogenetic analysis was performed on the basis of single nucleotide polymorphism (SNPs) data located in the core part of F. tularensis genome. Maximum parsimony algorithm was used to construct a dendrogram using the obtained data of common SNP-matrix.Results and discussion. The close relations of F. tularensis 15 NIIEG strain with F. tularensis LVS vaccine strain used in the countries of Western Europe and North America was confirmed. Searching for common single mutations characteristic of F. tularensis 15 vaccine strains of NIIEG and LVS, permitted to find 5 unique SNPs that distinguish them from all other 228 F. tularensis strains used in the comparison. Comparative genomic analysis ofF. tularensis 15 NIIEG vaccine strain and virulent strains revealed in its structure two extensive 526 bp deletions (genes pilA and pilE) and 1480 bp (genes encoding lipoprotein). Similar deletions are also present in the genome of the F. tularensis LVS vaccine strain.

Matching of human leukocyte antigen (HLA) gene polymorphisms by high-resolution DNA sequence analysis is the gold standard for determining compatibility between patient and donor for hematopoietic stem cell transplantation. Single-molecule sequencing (PacBio or MinION) is a newest (third) generation sequencing approach. MinION is a nanopore sequencing platform, which provides long targeted DNA sequences. The long reads provide unambiguous phasing, but the initial high error profile prevented its use in high-impact applications, such as HLA typing for HLA matching of donor and recipient in the transplantation setting. Ongoing developments on instrumentation and basecalling software have improved the per-base accuracy of 1D(2) nanopore reads tremendously. In the current study, two validation panels of samples covering 70 of the 71 known HLA class I allele groups were used to compare third field sequences obtained by MinION, with Sanger sequence-based typing showing a 100% concordance between both data sets. In addition, the first validation panel was used to set the acceptance criteria for the use of MinION in a routine setting. The acceptance criteria were subsequently confirmed with the second validation panel. In summary, the present study describes validation and implementation of nanopore sequencing HLA class I typing method and illustrates that nanopore sequencing technology has advanced to a point where it can be used in routine diagnostics with high accuracy.

Background The emergence of Mycobacterium tuberculosis with complex drug resistance profiles necessitates a rapid and comprehensive drug susceptibility test for guidance of patient treatment. We developed two targeted-sequencing workflows based on Illumina MiSeq and Nanopore MinION for the prediction of drug resistance in M. tuberculosis toward 12 antibiotics. Methods A total of 163 M. tuberculosis isolates collected from Hong Kong and Ethiopia were subjected to a multiplex PCR for simultaneous amplification of 19 drug resistance-associated genetic regions. The amplicons were then barcoded and sequenced in parallel on MiSeq and MinION in respective batch sizes of 24 and 12 samples. A web-based bioinformatics pipeline, BacterioChek-TB, was developed to translate the raw datasets into clinician-friendly reports. Results Both platforms successfully sequenced all samples with mean read depths of 1,127× and 1,649×, respectively. The variant calling by MiSeq and MinION could achieve 100% agreement if variants with an allele frequency of Conclusion Our study demonstrates the interchangeability of MiSeq and MinION platforms for generation of accurate and actionable results for the treatment of tuberculosis.

Background There continues to be a disjoint between the emergence of new diagnostic technologies and venues to train new physicians on how to apply them. Next-generation sequencing (NGS) has become a very important tool for a wide range of clinical applications. Technical complexity and cost have been the major obstacles in incorporating these technologies into the classroom. Goal for innovation We opted to use the MinION, which is a new portable DNA sequencer that can produce data in real-time at a relatively low cost, for a NGS hands-on workshop with medical students. Steps taken We conducted a pilot NGS hands-on practical module in order to expose an interested group of medical students to this new portable sequencer device. A pre- and post-survey, using a Likert-type scale survey items and open-ended questions, evaluated participant resistance to new diagnostic tools, familiarity with NGS, and likelihood to use a portable sequencer in clinical practice. Outcomes Prior to participating in our learning workshop, students did not understand how to incorporate NGS into clinical practice, and expressed that cost and prior training/knowledge were among the limiting factors in their likelihood to use NGS as a diagnostic tool. After participating in the module, students’ responses demonstrated a shift in their understanding of the scientific principles and applications of NGS (pre- and post-survey scores p

The increasing incidence of bloodstream infections including sepsis is a major challenge in intensive care units worldwide. However, current diagnostics for pathogen identification mainly depend on culture- and molecular-based approaches, which are not satisfactory regarding specificity, sensitivity, and time to diagnosis. Herein, we established a complete diagnostic workflow for real-time high-throughput sequencing of cell-free DNA from plasma based on nanopore sequencing for the detection of the causative agents, which was applied to the analyses of eight samples from four septic patients and three healthy controls, and subsequently validated against standard next-generation sequencing results. By optimization of library preparation protocols for short fragments with low input amounts, a 3.5-fold increase in sequencing throughput could be achieved. With tailored bioinformatics workflows, all eight septic patient samples were found to be positive for relevant pathogens. When considering time to diagnosis, pathogens were identified within minutes after start of sequencing. Moreover, an extrapolation of real-time sequencing performance on a cohort of 239 septic patient samples revealed that more than 90% of pathogen hits would have also been detected using the optimized MinION workflow. Reliable identification of pathogens based on circulating cell-free DNA sequencing using optimized workflows and real-time nanopore-based sequencing can be accomplished within 5 to 6 hours following blood draw. Therefore, this approach might provide therapy-relevant results in a clinically critical timeframe.

Transgene insertion patterns are critical for the analysis of transgenic animals because the influence of transgenes may change depending on the insertion pattern (such as copy numbers and orientations of concatenations) and the insertion position in the genome. We previously reported a genomic walking strategy to locate transgenes in the genomes of transgenic mice (Exp. Anim. 53: 103–111, 2004) and to analyze transgene insertion patterns (Exp. Anim. 55: 65–69, 2006). With such strategies, however, we could not determine the copy number of transgenes or global genome modification induced by transgene insertion due to read-length limitation. In this study, we used a long-read sequencer (MinION, Oxford Nanopore Technologies) to overcome this limitation. We obtained 922,210 reads using MinION with genomic DNA from a transgenic mouse strain (4C30, Proc. Jpn. Acad. Ser. B. Phys. Biol. Sci. 87: 550–562, 2011). Among the reads, we found one 21,457-bp read containing the transgene using a local BLAST search. Nucleotide dot plot analysis revealed that the transgene was inserted in the genome as a tandem concatemer with an almost entire construct (15–3,508 of 3,508 bp) and a partial fragment (4–660, 657 bp). Ensembl’s BLAST search against the C57BL/6N genome revealed a 9,388-bp deletion at the insertion position in the intron of the Sgcd gene, confirming that mutations such as a large genomic deletion could occur at the time of transgene insertion. Thus, long-read sequencers are useful tools for the analysis of transgene insertion patterns.

Background Campylobacter jejuni is a zoonotic pathogen that infects the human gut through the food chain mainly by consumption of undercooked chicken meat, raw chicken cross-contaminated ready-to-eat food or by raw milk. In the last decades, C. jejuni has increasingly become the most common bacterial cause for food-born infections in high income countries, costing public health systems billions of euros each year. Currently, different whole genome sequencing techniques such as short-read bridge amplification and long-read single molecule real-time sequencing techniques are applied for in-depth analysis of bacterial species, in particular, Illumina MiSeq, PacBio and MinION. Results In this study, we analyzed a recently isolated C. jejuni strain from chicken meat by short- and long-read data from Illumina, PacBio and MinION sequencing technologies. For comparability, this strain is used in the German PAC-CAMPY research consortium in several studies, including phenotypic analysis of biofilm formation, natural transformation and in vivo colonization models. The complete assembled genome sequence most likely consists of a chromosome of 1,645,980 bp covering 1665 coding sequences as well as a plasmid sequence with 41,772 bp that encodes for 46 genes. Multilocus sequence typing revealed that the strain belongs to the clonal complex CC-21 (ST-44) which is known to be involved in C. jejuni human infections, including outbreaks. Furthermore, we discovered resistance determinants and a point mutation in the DNA gyrase (gyrA) that render the bacterium resistant against ampicillin, tetracycline and (fluoro-)quinolones. Conclusion The comparison of Illumina MiSeq, PacBio and MinION sequencing and analyses with different assembly tools enabled us to reconstruct a complete chromosome as well as a circular plasmid sequence of the C. jejuni strain BfR-CA-14430. Illumina short-read sequencing in combination with either PacBio or MinION can substantially improve the quality of the complete chromosome and epichromosomal elements on the level of mismatches and insertions/deletions, depending on the assembly program used.

Gonorrhea is one of the most common sexually transmitted diseases worldwide. To cure infection and prevent transmission, timely and appropriate antimicrobial therapy is necessary. Unfortunately, Neisseria gonorrhoeae, the etiological agent of gonorrhea, has acquired nearly all known mechanisms of antimicrobial resistance (AMR), thereby compromising the efficacy of antimicrobial therapy. Treatment failure resulting from AMR has become a global public health concern. Whole-genome sequencing is an effective method to determine the AMR characteristics of N. gonorrhoeae. Compared with next-generation sequencing, the MinION sequencer (Oxford Nanopore Technologies (ONT)) has the advantages of long read length and portability. Based on a pilot study using MinION to sequence the genome of N. gonorrhoeae, we optimized the workflow of sequencing and data analysis in the current study. Here we sequenced nine isolates within one flow cell using a multiplexed sequencing strategy. After hybrid assembly with Illumina reads, nine integral circular chromosomes were obtained. By using the online tool Pathogenwatch and a BLAST-based workflow, we acquired complete AMR profiles related to seven classes of antibiotics. We also evaluated the performance of ONT-only assemblies. Most AMR determinants identified by ONT-only assemblies were the same as those identified by hybrid assemblies. Moreover, one of the nine assemblies indicated a potentially novel antimicrobial-related mutation located in mtrR which results in a frame-shift, premature stop codon, and truncated peptide. In addition, this is the first study using the MinION sequencer to obtain complete genome sequences of N. gonorrhoeae strains which are epidemic in China. This study shows that complete genome sequences and antimicrobial characteristics of N. gonorrhoeae can be obtained using the MinION sequencer in a simple and cost-effective manner, with hardly any knowledge of bioinformatics required. More importantly, this strategy provides us with a potential approach to discover new AMR determinants.

U.S. public health agencies have employed next-generation sequencing (NGS) as a tool to quickly identify foodborne pathogens during outbreaks. Although established short-read NGS technologies are known to provide highly accurate data, long-read sequencing is still needed to resolve highly-repetitive genomic regions and genomic arrangement, and to close the sequences of bacterial chromosomes and plasmids. Here, we report the use of long-read nanopore sequencing to simultaneously sequence the entire chromosome and plasmid of Salmonella enterica subsp. enterica serovar Bareilly and Escherichia coli O157:H7. We developed a rapid and random sequencing approach coupled with de novo genome assembly within a customized data analysis workflow that uses publicly-available tools. In sequencing runs as short as four hours, using the MinION instrument, we obtained full-length genomes with an average identity of 99.87% for Salmonella Bareilly and 99.89% for E. coli in comparison to the respective MiSeq references. These nanopore-only assemblies provided readily available information on serotype, virulence factors, and antimicrobial resistance genes. We also demonstrate the potential of nanopore sequencing assemblies for rapid preliminary phylogenetic inference. Nanopore sequencing provides additional advantages as very low capital investment and footprint, and shorter (10 hours library preparation and sequencing) turnaround time compared to other NGS technologies.

AimThe MinION nanopore sequencing device opens the opportunity to cost-effective and point-of-care DNA sequencing. We developed a multiplex assay targeting pharmacogenetic variants related to clopidogrel and warfarin, two commonly used drugs that show response variability due to genetic polymorphisms.Materials & MethodsSix reference and 78 clinical DNA samples were amplified by PCR to generate 15 amplicons targeting key variants. These products were then barcoded to enable sample multiplexing. Three variant calling tools were used to compare genotyping accuracy.Results and ConclusionsAll but three samples were successfully sequenced and genotyped. Nanopolish software achieved accuracy > 90 % for all except one variant. While minor mis-genotyping issues exist, this work demonstrates that drug-specific or broad pharmacogenetic screening assays are possible on the MinION sequencing device.

Infectious disease is still a major threat in the world today. Five decades ago, it was considered soon to be eradicated, but the adaptation of pathogens to environmental pressure, such as antimicrobials, encouraged the emergence and reemergence of infectious disease. The fight with infectious disease starts with prevention, diagnosis, and treatment. Diagnosis can be upheld by observing the cause of disease under the microscope or detecting the presence of nucleic acid and proteins of the pathogens. The molecular techniques span from classical polymerase chain reaction (PCR) to sequencing the nucleic acid composition. Here, we are reviewing the works have been undertaken to utilize a portable sequencer, MinION, in various aspects of infectious disease management.

Protein and solid-state nanopores are used for DNA/RNA sequencing as well as for single molecule analysis. We proposed that selective labeling/tagging may improve base-to-base resolution of nucleic acids via nanopores. We have explored one specific tag, the Osmium tetroxide 2,2′-bipyridine (OsBp), which conjugates to pyrimidines and leaves purines intact. Earlier reports using OsBp-tagged oligodeoxyribonucleotides demonstrated proof-of-principle during unassisted voltage-driven translocation via either alpha-Hemolysin or a solid-state nanopore. Here we extend this work to RNA oligos and a third nanopore by employing the MinION, a commercially available device from Oxford Nanopore Technologies (ONT). Conductance measurements demonstrate that the MinION visibly discriminates oligoriboadenylates with sequence A15PyA15, where Py is an OsBp-tagged pyrimidine. Such resolution rivals traditional chromatography, suggesting that nanopore devices could be exploited for the characterization of RNA oligos and microRNAs enhanced by selective labeling. The data also reveal marked discrimination between a single pyrimidine and two consecutive pyrimidines in OsBp-tagged AnPyAn and AnPyPyAn. This observation leads to the conjecture that the MinION/OsBp platform senses a 2-nucleotide sequence, in contrast to the reported 5-nucleotide sequence with native nucleic acids. Such improvement in sensing, enabled by the presence of OsBp, may enhance base-calling accuracy in enzyme-assisted DNA/RNA sequencing.

Purpose . The new third-generation sequencing platform MinION is an attractive maintenance-free and disposable portable tool that can perform long-read and real-time sequencing. In this study, we validated this technology for the identification of pathogens from positive blood culture (BC) bottles. Methodology . A total of 38 positive BC bottles were collected from patients with bloodstream infections, and 18 isolates of Gram-negative (GN) bacteria and 20 isolates of Gram-positive (GP) bacteria were identified from these using 16S rRNA sequencing and then used in this study. DNA was extracted from each aliquot using an extraction protocol that combined glass bead beating and chemical lysis. Up to 200 ng of each purified DNA sample was processed for library preparation and whole-genome sequencing was performed on up to 12 samples through a single MinION flow cell. Results . All GN bacteria identifications made by MinION sequencing for 30 min using the What’s In My Pot? (WIMP) workflow via EPI2ME on the basis of the most frequent classified reads were consistent with those made by 16S rRNA sequencing. On the other hand, for GP bacteria specimens, the identification results for 16S rRNA sequencing and MinION were only in agreement in 12 out of 20 (60.0 %) cases. ARMA analysis was able to detect extended-spectrum β-lactamase (ESBL)-associated genes among various antimicrobial resistance-related genes. Conclusion . We demonstrated the potential of the MinION sequencer for the identification of GN bacteria from positive BC bottles and the confirmation of an ESBL phenotype. This innovative sequence technology and its application could lead to a breakthrough in the diagnosis of infectious diseases.

The Oxford MinION, the first commercial nanopore sequencer, is also the first to implement molecule-by-molecule real-time selective sequencing or “Read Until”. As DNA transits a MinION nanopore, real-time pore current data can be accessed and analyzed to provide active feedback to that pore. Fragments of interest are sequenced by default, while DNA deemed non-informative is rejected by reversing the pore bias to eject the strand, providing a novel means of background depletion and/or target enrichment. In contrast to the previously published pattern-matching Read Until approach, our RUBRIC method is the first example of real-time selective sequencing where on-line basecalling enables alignment against conventional nucleic acid references to provide the basis for sequence/reject decisions. We evaluate RUBRIC performance across a range of optimizable parameters, apply it to mixed human/bacteria and CRISPR/Cas9-cut samples, and present a generalized model for estimating real-time selection performance as a function of sample composition and computing configuration.

The prevalence of nontuberculous mycobacteria (NTM) pulmonary diseases has been increasing worldwide. NTM consist of approximately 200 species and distinguishing between them at the subspecies level is critical to treatment. In this study, we sequenced 63 NTM genomes, 27 of which were newly determined, by hybrid assembly using sequencers from Illumina and Oxford Nanopore Technologies (ONT). This analysis expanded the available genomic data to 175 NTM species and redefined their subgenus classification. We also developed a novel multi-locus sequence typing (MLST) database based on 184 genes from 7547 assemblies and an identification software, mlstverse, which can also be used for detecting other bacteria given a suitable MLST database. This method showed the highest sensitivity and specificity amongst conventional methods and demonstrated the capacity for rapid detection of NTM, 10 min of sequencing of the ONT MinION being sufficient. Application of this methodology could improve disease epidemiology and increase the cure rates of NTM diseases.

Summary Hybrid assembly strategies that combine long‐read sequencing reads from Oxford Nanopore's MinION device combined with high‐depth Illumina paired‐end reads have enabled completion and circularization of both plasmids and chromosomes from multiple bacterial strains. Here we demonstrate the utility of supplementing Illumina paired‐end reads from a previously published draft genome of P. syringae pv. pisi PP1 with long reads to generate a complete genome sequence for this strain. The phylogenetic placement and genomic repertoire of virulence factors within this strain provides a unique perspective on virulence evolution within P. syringae phylogroup 2, and highlights that strains can rapidly acquire virulence factors through horizontal gene transfer by acquisition of plasmids as well as through chromosomal recombination.

In order to characterize unauthorized genetically modified petunia, an integrated strategy has been applied here on several suspected petunia samples from the European market. More precisely, DNA fragments of interest were produced by DNA walking anchored on key targets, earlier detected by real-time PCR screening analysis, to be subsequently sequenced using the MinION platform from Oxford Nanopore Technologies. This way, the presence of genetically modified petunia was demonstrated via the characterization of their transgene flanking regions as well as unnatural associations of elements from their transgenic cassette.

Algal blooms occur in freshwater bodies throughout the world, often leading to fish kills. Cases of these kills along the Ural River were reported in 2018–2019, involving significant amount of sturgeon in fish farming areas. In this study, the analysis of algal samples from the delta of the Ural River up to 100 km inland was carried out from August to December 2019 using imaging flow cytometry (IFC), molecular biological, and microscopic techniques. We identified the filamentous cyanobacteria Cuspidothrix issatschenkoi, Dolichospermum cf. flos-aquae, Dolichospermum cf. macrosporum, Pseudanabaena limnetica, and Planktothrix spp. as the dominant potentially toxic phytoplankton species, and we also found minor quantities of Cylindrospermopsis raciborskii. For the first time, molecular phylogenetic investigations of field clones of cyanobacteria from Ural River were carried out to establish the taxa of the dominant species and to identify the presence of genes encoding toxins. The complementary analysis with nanopore-based next-generation sequencing overlapped with the results of IFC and was instrumental in revealing minor cyanobacteria taxa. Real-time PCR analysis and sequencing indicated the presence of Microcystis and ADA-clade spp. as well as genes associated with the production of microcystin (mcyE) and the algal neurotoxin saxitoxin (sxtA) originating from cyanobacteria. These findings suggest that toxin-producing cyanobacteria could become a threat in the Ural River near Atyrau, which can significantly affect aquaculture in the region.

The adoption of Oxford Nanopore Technologies (ONT) sequencing as a tool in plant virology has been relatively slow despite its promise in more recent years to yield large quantities of long nucleotide sequences in real time without the need for prior amplification. The portability of the MinION and Flongle platforms combined with lowering costs and continued improvements in read accuracy make ONT an attractive method for both low- and high-scale virus diagnostics. Here, we provide a detailed step-by-step protocol using the ONT Flongle platform that we have developed for the routine application on a range of symptomatic post-entry quarantine and domestic surveillance plant samples. The aim of this methods paper is to highlight ONT’s feasibility as a valuable component to the diagnostician’s toolkit and to hopefully stimulate other laboratories towards the eventual goal of integrating high-throughput sequencing technologies as validated plant virus diagnostic methods in their own right.

Middle East respiratory syndrome coronavirus (MERS-CoV) is a zoonotic infection that emerged in the Middle East in 2012. Symptoms range from mild to severe and include both respiratory and gastrointestinal illnesses. The virus is mainly present in camel populations with occasional zoonotic spill over into humans. The severity of infection in humans is influenced by numerous factors, and similar to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), underlying health complications can play a major role. Currently, MERS-CoV and SARS-CoV-2 are coincident in the Middle East and thus a rapid way of sequencing MERS-CoV to derive genotype information for molecular epidemiology is needed. Additionally, complicating factors in MERS-CoV infections are coinfections that require clinical management. The ability to rapidly characterize these infections would be advantageous. To rapidly sequence MERS-CoV, an amplicon-based approach was developed and coupled to Oxford Nanopore long read length sequencing. This and a metagenomic approach were evaluated with clinical samples from patients with MERS. The data illustrated that whole-genome or near-whole-genome information on MERS-CoV could be rapidly obtained. This approach provided data on both consensus genomes and the presence of minor variants, including deletion mutants. The metagenomic analysis provided information of the background microbiome. The advantage of this approach is that insertions and deletions can be identified, which are the major drivers of genotype change in coronaviruses. IMPORTANCE Middle East respiratory syndrome coronavirus (MERS-CoV) emerged in late 2012 in Saudi Arabia. The virus is a serious threat to people not only in the Middle East but also in the world and has been detected in over 27 countries. MERS-CoV is spreading in the Middle East and neighboring countries, and approximately 35% of reported patients with this virus have died. This is the most severe coronavirus infection so far described. Saudi Arabia is a destination for many millions of people in the world who visit for religious purposes (Umrah and Hajj), and so it is a very vulnerable area, which imposes unique challenges for effective control of this epidemic. The significance of our study is that clinical samples from patients with MERS were used for rapid in-depth sequencing and metagenomic analysis using long read length sequencing.

Eight isolates of Streptococcus equi subsp. zooepidemicus were isolated from mares with clinical cases of endometritis. S. equi subsp. zooepidemicus strains were chosen for sequencing based on differing levels of biofilm production in vitro . Using Illumina short-read sequencing in conjunction with MinION sequencing, we report the genomes of eight isolates.

The emergence of long-read sequencing technologies has made a revolutionary step in genome biology and medicine. However, long reads are characterized by a relatively high error rate, impairing their usage for variant calling as a part of routine practice. Thus, we here examine different popular variant callers on long-read sequences of the human mitochondrial genome, convenient in terms of small size and easily obtained high coverage. The sequencing of mitochondrial DNA from 8 patients was conducted via Illumina (MiSeq) and the Oxford Nanopore platform (MinION), with the former utilized as a gold standard when evaluating variant calling’s accuracy. We used a conventional GATK3-BWA-based pipeline for paired-end reads and Guppy basecaller coupled with minimap2 for MinION data, respectively. We then compared the outputs of Clairvoyante, Nanopolish, GATK3, Longshot, DeepVariant, and Varscan tools applied on long-read alignments by analyzing false-positive and false-negative rates. While for most callers, raw signals represented false positives due to homopolymeric errors, Nanopolish demonstrated both high similarity (Jaccard coefficient of 0.82) and a comparable number of calls with the Illumina data (140 vs. 154) with the best performance according to AUC (area under ROC curve, 0.953) as well. In sum, our results, despite being obtained from a small dataset, provide evidence that sufficient coverage coupled with an optimal pipeline could make long reads of mitochondrial DNA applicable for variant calling.

The cutoff level applied in sequencing analysis varies according to the sequencing technology, sample type, and study purpose, which can largely affect the coverage and reliability of the data obtained. In this study, we aimed to determine the optimal combination of parameters for reliable RNA transcriptome data analysis. Toward this end, we compared the results obtained from different transcriptome analysis platforms (quantitative polymerase chain reaction, Illumina RNASeq, and Oxford Nanopore Technologies MinION) for the transcriptome encoded by human chromosome 18 (Chr 18) using the same sample types (HepG2 cells and liver tissue). A total of 275 protein-coding genes encoded by Chr 18 was taken as the gene set for evaluation. The combination of Illumina RNASeq and MinION nanopore technologies enabled the detection of at least one transcript for each protein-coding gene encoded by Chr 18. This combination also reduced the probability of false-positive detection of low-copy transcripts due to the simultaneous confirmation of the presence of a transcript by the two fundamentally different technologies: short reads essential for reliable detection (Illumina RNASeq) and long-read sequencing data (MinION). The combination of these technologies achieved complete coverage of all 275 protein-coding genes on Chr 18, identifying transcripts with non-zero expression levels. This approach can improve distinguishing the biological and technical reasons for the absence of mRNA detection for a given gene in transcriptomics.

Blastocystis is a gastrointestinal protist frequently reported in humans and animals worldwide. Wildlife populations, including deer, may serve as reservoirs of parasitic diseases for both humans and domestic animals, either through direct contact or through contamination of food or water resources. However, no studies of the occurrence and subtype distribution of Blastocystis in wildlife populations have been conducted in the United States. PCR and next generation amplicon sequencing were used to determine the occurrence and subtypes of Blastocystis in white-tailed deer (Odocoileus virginianus). Blastocystis was common, with 88.8% (71/80) of samples found to be positive. Twelve subtypes were identified, ten previously reported (ST1, ST3, ST4, ST10, ST14, ST21, and ST23–ST26) and two novel subtypes (ST30 and ST31). To confirm the validity of ST30 and ST31, MinION sequencing was used to obtain full-length SSU rRNA gene sequences, and phylogenetic and pairwise distance analyses were performed. ST10, ST14, and ST24 were the most commonly observed subtypes. Potentially zoonotic subtypes ST1, ST3, or ST4 were present in 8.5% of Blastocystis-positives. Mixed subtype infections were common (90.1% of Blastocystis-positives). This study is the first to subtype Blastocystis in white-tailed deer. White-tailed deer were found to be commonly infected/colonized with a wide diversity of subtypes, including two novel subtypes, zoonotic subtypes, and subtypes frequently reported in domestic animals. More studies in wildlife are needed to better understand their role in the transmission of Blastocystis.

Whole-genome sequencing of infectious agents enables the identification and characterization of emerging viruses. The MinION device is a portable sequencer that allows real-time sequencing in fields or hospitals. Hantaan orthohantavirus (Hantaan virus, HTNV), harbored by Apodemus agrarius, causes hemorrhagic fever with renal syndrome (HFRS) and poses a critical public health threat worldwide. In this study, we aimed to evaluate the feasibility of using nanopore sequencing for whole-genome sequencing of HTNV from samples having different viral copy numbers. Amplicon-based next-generation sequencing was performed in A. agrarius lung tissues collected from the Republic of Korea. Genomic sequences of HTNV were analyzed based on the viral RNA copy numbers. Amplicon-based nanopore sequencing provided nearly full-length genomic sequences of HTNV and showed sufficient read depth for phylogenetic analysis after 8 h of sequencing. The average identity of the HTNV genome sequences for the nanopore sequencer compared to those of generated from Illumina MiSeq revealed 99.8% (L and M segments) and 99.7% (S segment) identities, respectively. This study highlights the potential of the portable nanopore sequencer for rapid generation of accurate genomic sequences of HTNV for quicker decision making in point-of-care testing of HFRS patients during a hantavirus outbreak.

Blastocystis is a common food- and water-borne intestinal protist parasite of humans and many other animals. Blastocystis comprises multiple subtypes (STs) based on variability within the small subunit ribosomal (SSU rRNA) RNA gene. Though full-length reference sequences of the SSU rRNA gene are a current requirement to name a novel Blastocystis subtype, full-length reference sequences are not currently available for all subtypes. In the present study, Oxford Nanopore MinION long-read sequencing was employed to generate full-length SSU rRNA sequences for seven new Blastocystis subtypes for which no full-length references currently exist: ST21, ST23, ST24, ST25, ST26, ST27, and ST28. Phylogenetic analyses and pairwise distance matrixes were used to compare full-length and partial sequences of the two regions that are most commonly used for subtyping. Analyses included Blastocystis nucleotide sequences obtained in this study (ST21 and ST23–ST28) and existing subtypes for which full-length reference sequences were available (ST1–ST17 and ST29). The relationships and sequence variance between new and existing subtypes observed in analyses of different portions of the SSU rRNA gene are discussed. The full-length SSU rRNA reference sequences generated in this study provide essential new data to study and understand the relationships between the genetic complexity of Blastocystis and its host specificity, pathogenicity, and epidemiology.

Here, we report the application of a portable sequencer, MinION, for genotyping the malaria parasite Plasmodium falciparum. In the present study, an amplicon mixture of nine representative genes causing resistance to anti-malaria drugs is diagnosed. First, we developed the procedure for four laboratory strains (3D7, Dd2, 7G8, and K1), and then applied the developed procedure to ten clinical samples. We sequenced and re-sequenced the samples using the obsolete flow cell R7.3 and the most recent flow cell R9.4. Although the average base-call accuracy of the MinION sequencer was 74.3%, performing >50 reads at a given position improves the accuracy of the SNP call, yielding a precision and recall rate of 0.92 and 0.8, respectively, with flow cell R7.3. These numbers increased significantly with flow cell R9.4, in which the precision and recall are 1 and 0.97, respectively. Based on the SNP information, the drug resistance status in ten clinical samples was inferred. We also analyzed K13 gene mutations from 54 additional clinical samples as a proof of concept. We found that a novel amino-acid changing variation is dominant in this area. In addition, we performed a small population-based analysis using 3 and 5 cases (K13) and 10 and 5 cases (PfCRT) from Thailand and Vietnam, respectively. We identified distinct genotypes from the respective regions. This approach will change the standard methodology for the sequencing diagnosis of malaria parasites, especially in developing countries.

The sequencing, assembly, and analysis of bacterial genomes is central to tracking and characterizing foodborne pathogens. The bulk of bacterial genome sequencing at the US Food and Drug Administration is performed using short-read Illumina MiSeq technology, resulting in highly accurate but fragmented genomic sequences. The MinION sequencer from Oxford Nanopore is an evolving technology that produces long-read sequencing data with low equipment cost. The goal of this study was to compare Campylobacter genome assemblies generated from MiSeq and MinION data independently, as well as hybrid genome assemblies combining both data types. Two reference strains and two field isolates of C. jejuni were sequenced using MiSeq and MinION, and the sequence data were assembled using the software programs SPAdes and Canu, respectively. Hybrid genome assembly was performed using the program Unicycler. Comparison of the C. jejuni 81-176 and RM1221 genome assemblies to the PacBio reference genomes revealed that the SPAdes assemblies had the most accurate nucleotide identity, while the hybrid assemblies were the most contiguous. Assemblies generated only from MinION data using Canu were the least accurate, containing many indels and substitutions that affected downstream analyses. The hybrid sequencing approach was the most useful for detecting plasmids, large genome rearrangements, and repetitive elements such as rRNA and tRNA genes. The full genomes of both C. jejuni field isolates were completed and circularized using hybrid sequencing, and a plasmid was detected in one isolate. Continued development of nanopore sequencing technologies will likely enhance the accuracy of hybrid genome assemblies and enable public health laboratories to routinely generate complete circularized bacterial genome sequences.

DRO is supported by the Wellcome Trust ISSF award 204821/Z/16/Z. Bioinformatics and computational biology analyses were supported by the University of St Andrews Bioinformatics Unit (AMD3BIOINF), funded by Wellcome Trust ISSF award 105621/Z/14/Z. The sample BioBank was compiled with informed consent (Medial Research Council, www.mrc.ac.uk, grant G0801971). Genome sequencing was supported by Tenovus Scotland (T16/03). Malaria is responsible for unacceptably high morbidity and mortality, especially in Sub-Saharan African Nations. Malaria is caused by member species’ of the genus Plasmodium and despite concerted and at times valiant efforts, the underlying pathophysiological processes leading to severe disease are poorly understood. Here we describe zoonotic malaria caused by Plasmodium knowlesi and the utility of this parasite as a model system for severe malaria. We present a method to generate long-read third-generation Plasmodium genome sequence data from archived clinical samples using the MinION platform. The method and technology are accessible, affordable and data is generated in real-time. We propose that by widely adopting this methodology important information on clinically relevant parasite diversity, including multiple gene family members, from geographically distinct study sites will emerge. Our goal, over time, is to exploit the duality of P. knowlesi as a well-used laboratory model and human pathogen to develop a representative translational model system for severe malaria that is informed by clinically relevant parasite diversity. Publisher PDF

The emergence and rapid global spread of SARS-CoV-2 demonstrates the importance of infectious disease surveillance, particularly during the early stages. Viral genomes can provide key insights into transmission chains and pathogenicity. Nasopharyngeal swabs were obtained from thirty-two of the first SARS-CoV-2 positive cases (March 18–30) in Kingston Ontario, Canada. Viral genomes were sequenced using Ion Torrent (n = 24) and MinION (n = 27) sequencing platforms. SARS-CoV-2 genomes carried forty-six polymorphic sites including two missense and three synonymous variants in the spike protein gene. The D614G point mutation was the predominate viral strain in our cohort (92.6%). A heterozygous variant (C9994A) was detected by both sequencing platforms but filtered by the ARTIC network bioinformatic pipeline suggesting that heterozygous variants may be underreported in the SARS-CoV-2 literature. Phylogenetic analysis with 87,738 genomes in the GISAID database identified global origins and transmission events including multiple, international introductions as well as community spread. Reported travel history validated viral introduction and transmission inferred by phylogenetic analysis. Molecular epidemiology and evolutionary phylogenetics may complement contact tracing and help reconstruct transmission chains of emerging diseases. Earlier detection and screening in this way could improve the effectiveness of regional public health interventions to limit future pandemics.

Objectives Development of sequencing technology has opened up vast opportunities for tree genomic research in the tropics. One of the aforesaid technologies named ONT (Oxford Nanopore Technology) has attracted researchers in undertaking testings and experiments due to its affordability and accessibility. To the best of our knowledge, there has been no published reports on the use of ONT for genomic analysis of Indonesian tree species. This progress is promising for further improvement in order to acquire more genomic data for research purposes. Therefore, the present study was carried out to determine the effectiveness of ONT in generating long-read DNA sequences using DNA isolated from leaves and wood cores of Macassar ebony (Diospyros celebica Bakh.). Data description Long-read sequences data of leaves and wood cores of Macassar ebony were generated by using the MinION device and MinKnow v3.6.5 (ONT). The obtained data, as the first long-read sequence dataset for Macassar ebony, is of great importance to conserve the genetic diversity, understanding the molecular mechanism, and sustainable use of plant genetic resources for downstream applications.

This minireview will discuss the improvements in Oxford Nanopore (Oxford; sequencing technology that make the MinION a viable platform for microbial ecology studies. Specific issues being addressed are the increase in sequence accuracy from 65 to 96.5% during the last 5 years, the ability to obtain a quantifiable/predictive signal from the MinION with respect to target molecule abundance, simple-to-use GUI-based pathways for data analysis and the modest additional equipment needs for sequencing in the field. Coupling these recent improvements with the low capital costs for equipment and the reasonable per sample cost makes MinION sequencing an attractive option for virtually any laboratory., The Oxford Nanopore MinION is the preferred platform for studies in microbial ecology, because of its long-read capability, low cost and ease of use.

For the past two decades, microbial monitoring of the International Space Station (ISS) has relied on culture-dependent methods that require return to Earth for analysis. This has a number of limitations, with the most significant being bias towards the detection of culturable organisms and the inherent delay between sample collection and ground-based analysis. In recent years, portable and easy-to-use molecular-based tools, such as Oxford Nanopore Technologies&rsquo, MinIONTM sequencer and miniPCR bio&rsquo, s miniPCR&trade, thermal cycler, have been validated onboard the ISS. Here, we report on the development, validation, and implementation of a swab-to-sequencer method that provides a culture-independent solution to real-time microbial profiling onboard the ISS. Method development focused on analysis of swabs collected in a low-biomass environment with limited facility resources and stringent controls on allowed processes and reagents. ISS-optimized procedures included enzymatic DNA extraction from a swab tip, bead-based purifications, altered buffers, and the use of miniPCR and the MinION. Validation was conducted through extensive ground-based assessments comparing current standard culture-dependent and newly developed culture-independent methods. Similar microbial distributions were observed between the two methods, however, as expected, the culture-independent data revealed microbial profiles with greater diversity. Protocol optimization and verification was established during NASA Extreme Environment Mission Operations (NEEMO) analog missions 21 and 22, respectively. Unique microbial profiles obtained from analog testing validated the swab-to-sequencer method in an extreme environment. Finally, four independent swab-to-sequencer experiments were conducted onboard the ISS by two crewmembers. Microorganisms identified from ISS swabs were consistent with historical culture-based data, and primarily consisted of commonly observed human-associated microbes. This simplified method has been streamlined for high ease-of-use for a non-trained crew to complete in an extreme environment, thereby enabling environmental and human health diagnostics in real-time as future missions take us beyond low-Earth orbit.

The rapid and accurate identification of invertebrate pests detected at the border is a challenging task. Current diagnostic methods used at the borders are mainly based on time consuming visual and microscopic examinations. Here, we demonstrate a rapid in-house workflow for DNA extraction, PCR amplification of the barcode region of the mitochondrial cytochrome oxidase subunit I (COI) gene and Oxford Nanopore Technologies (ONT) MinION sequencing of amplified products multiplexed after barcoding on ONT Flongle flow cells. A side-by-side comparison was conducted of DNA barcode sequencing-based identification and morphological identification of both large (&gt, 0.5 mm in length) and small (&lt, 0.5 mm in length) invertebrate specimens intercepted at the Australian border. DNA barcode sequencing results supported the morphological identification in most cases and enabled immature stages of invertebrates and their eggs to be identified more confidently. Results also showed that sequencing the COI barcode region using the ONT rapid sequencing principle is a cost-effective and field-adaptable approach for the rapid and accurate identification of invertebrate pests. Overall, the results suggest that MinION sequencing of DNA barcodes offers a complementary tool to the existing morphological diagnostic approaches and provides rapid, accurate, reliable and defendable evidence for identifying invertebrate pests at the border.

We describe a protocol to prepare a multiplexed mtDNA library from a blood sample for performing a long read sequencing of the mitochondrial genome. All steps are carefully described to get a high enrichment of mtDNA relative to total DNA extracted from the blood sample. The obtained mutiplexed library allows the production of long sequence mtDNA reads up to 16.5 kbp with a quality enabling variant-calling by using a portable sequencer (MinION, Oxford Nanopore Technologies).

Shotgun metagenomic sequencing (SMg) enables the simultaneous detection and characterization of viruses in human, animal and environmental samples. However, lack of sensitivity still poses a challenge and may lead to poor detection and data acquisition for detailed analysis. To improve sensitivity, we assessed a broad scope targeted sequence capture (TSC) panel (ViroCap) in both human and animal samples. Moreover, we adjusted TSC for the Oxford Nanopore MinION and compared the performance to an SMg approach. TSC on the Illumina NextSeq served as the gold standard. Overall, TSC increased the viral read count significantly in challenging human samples, with the highest genome coverage achieved using the TSC on the MinION. TSC also improved the genome coverage and sequencing depth in clinically relevant viruses in the animal samples, such as influenza A virus. However, SMg was shown to be adequate for characterizing a highly diverse animal virome. TSC on the MinION was comparable to the NextSeq and can provide a valuable alternative, offering longer reads, portability and lower initial cost. Developing new viral enrichment approaches to detect and characterize significant human and animal viruses is essential for the One Health Initiative.

Background Blastocystis sp. is one of the most common enteric parasites of humans and animals worldwide. It is well recognized that this ubiquitous protist displays a remarkable degree of genetic diversity in the SSU rRNA gene, which is currently the main gene used for defining Blastocystis subtypes. Yet, full-length reference sequences of this gene are available for only 16 subtypes of Blastocystis in part because of the technical difficulties associated with obtaining these sequences from complex samples. Methods We have developed a method using Oxford Nanopore MinION long-read sequencing and universal eukaryotic primers to produce full-length (> 1800 bp) SSU rRNA gene sequences for Blastocystis. Seven Blastocystis specimens representing five subtypes (ST1, ST4, ST10, ST11, and ST14) obtained both from cultures and feces were used for validation. Results We demonstrate that this method can be used to produce highly accurate full-length sequences from both cultured and fecal DNA isolates. Full-length sequences were successfully obtained from all five subtypes including ST11 for which no full-length reference sequence currently exists and for an isolate that contained mixed ST10/ST14. Conclusions The suitability of the use of MinION long-read sequencing technology to successfully generate full-length Blastocystis SSU rRNA gene sequences was demonstrated. The ability to produce full-length SSU rRNA gene sequences is key in understanding the role of genetic diversity in important aspects of Blastocystis biology such as transmission, host specificity, and pathogenicity. Graphical Abstract

Long-read sequencing (LRS) has become a standard approach for transcriptome analysis in recent years. Bovine alphaherpesvirus 1 (BoHV-1) is an important pathogen of cattle worldwide. This study reports the profiling of the dynamic lytic transcriptome of BoHV-1 using two long-read sequencing (LRS) techniques, the Oxford Nanopore Technologies MinION, and the LoopSeq synthetic LRS methods, using multiple library preparation protocols. In this work, we annotated viral mRNAs and non-coding transcripts, and a large number of transcript isoforms, including transcription start and end sites, as well as splice variants of BoHV-1. Our analysis demonstrated an extremely complex pattern of transcriptional overlaps.

The complete mitochondrial (mt) genomes of five subspecies of the Eurasian (Common) magpie Pica pica were determined for the first time. Lengths of the circular genomes comprise 13 protein-coding genes, two rRNA genes (for 12S rRNA and 16S rRNA), 22 tRNA genes, and the non-coding control region (CR). Gene content and lengths of the genomes (16,936¿16,945 bp) are similar to typical vertebrate mt genomes. The subspecies studied differs by several single substitutions and indels, especially in the CR. The phylogenetic tree based on complete mt genomes shows a deep divergence of the two groups of subspecies which supports the proposed division into two distinct species: P. pica and P. serica., The study was partly supported by the Far East Basic Research Program of the Far Eastern Branch of the Russian Academy of Sciences, grant [No. 18-4-031].

Fungal infections are being caused by a broadening spectrum of fungi, yet in many cases, identification to the species level is required for proper antifungal selection. We investigated the fungal intergenic spacer sequence (IGS) in combination with nanopore sequencing, for fungal identification. We sequenced isolates from two Cryptococcus species complexes, C. gattii and C. neoformans, which are the main pathogenic members of this genus, using the Oxford Nanopore Technologies MinION device and Sanger sequencing. There is enough variation within the two complexes to argue for further resolution into separate species, which we wanted to see if nanopore sequencing could detect. Using the R9.4.1 flow cell, IGS sequence identities averaged 99.57% compared to Sanger sequences of the same region. When the newer R10.3 flow cell was used, accuracy increased to 99.83% identity compared to the same Sanger sequences. Nanopore sequencing errors were predominantly in regions of homopolymers, with G homopolymers displaying the largest number of errors and C homopolymers displaying the least. Phylogenetic analysis of the nanopore and Sanger derived sequences resulted in indistinguishable trees. Comparison of average percent identities between the C. gattii and C. neoformans species complexes resulted in only a 74-77% identity between the two complexes. Sequencing using the nanopore platform could be completed in less than an hour and samples could be multiplexed in groups as large as twenty-four sequences in a single run. These results suggest that sequencing the IGS region using nanopore sequencing could be a potential new molecular diagnostic strategy.