Search

Background/Purpose Mineral trioxide aggregate (MTA) was widely used in endodontic therapy as bioceramic material. Although MTA has high biocompatibility, it may lead to tooth discoloration. The aim of this study was to investigate the discoloration of two different bioceramic materials and the effects of internal bleaching. Methods Thirty single-canal mandibular premolars were extracted and randomly assigned to three groups (n = 10), white ProRoot® MTA, SavDen® MTA and a control group. Endodontic access opening, cleaning and shaping were performed, then the teeth were obturated using the two bioceramic materials. Tooth color was recorded at baseline, day 1, and 1, 2, 4, 6, 8, 12, 16, and 24 weeks after treatment. At the end of 24 weeks, sodium perborate was used to perform internal bleaching. Tooth color was recorded at 1, 2, and 6 weeks subsequently. Teeth were measured using a DeguDent® spectrophotometer, and data were transformed into Commission Internationale de l'Eclairage (CIE) L∗a∗b∗ system. Results Teeth treated with white ProRoot® MTA showed significant color change and decrease in L∗ value. Internal bleaching leaded to decrease of the ΔE∗ value for all three groups and increase in the L∗ value. There was no difference in tooth discoloration between SavDen® MTA and the control group after obturation and internal bleaching. Conclusion In terms of visual perception, white ProRoot® MTA tends to cause black and blue discoloration. SavDen® MTA, formulated with calcium lactate gluconate, could be used to reduce tooth discoloration in endodontic treatment.

Background: Hypertension and periodontal diseases share several risk factors. Inflammation biomarkers in saliva are related to hypertension and periodontal disease. The aim of this study was to explore the role of the salivary inflammatory biomarkers in the treatment effectiveness of patients with hypertension and periodontal disease. Methods: This observational study enrolled 160 subjects diagnosed with periodontitis, 40 of which had a history of hypertension. All subjects had completed scaling and root planning therapeutic procedures within four weeks. The clinical periodontal parameters (i.e., bleeding on probing, plaque control record (PCR), and probing depth (PD)) were evaluated before and after the treatment. Pro-inflammatory markers were determined using a commercial kit. Results: The recovery rate (PD 4–9 mm) in non-hypertensive subjects was significantly higher than in hypertensive subjects (60.47% vs. 52.60%, respectively, p = 0.04). All clinical parameters, excluding PCR, positively correlated with salivary IL-1β at baseline and after completing treatment. Our results showed that increased salivary IL-1β levels were positively associated with decreased PCR (β = −27.65 and p = 0.05) and PD recovery rate (β = −17.05 and p = 0.02) in hypertensive subjects. Conclusions: The present study sheds important light on the clinical use of salivary pro-inflammatory cytokines as valuable biomarkers for predicting the treatment effectiveness of patients suffering from hypertension and periodontitis.

Background Periodontal disease is an inflammatory disease in which pathogenic infections trigger a series of inflammatory responses and redox regulation. The hypothesis of this study was that a host’s redox regulation, as modified by genetic polymorphisms, may affect periodontal disease activities (including the plaque index (PlI), bleeding on probing (BOP), and pocket depth (PD)) during periodontal therapy. Methods In total, 175 patients diagnosed with periodontitis were recruited from the Department of Periodontology, Taipei Medical University Hospital. Both saliva samples and clinical measurements (PlI, BOP, and PD) were taken at the baseline and at 1 month after completing treatment. Salivary manganese superoxide dismutase (MnSOD) and catalase, and corresponding genetic polymorphisms (MnSOD, T47C, rs4880 and Catalase, C-262 T, rs1001179) were determined. The extent of change (Δ) of MnSOD or catalase was calculated by subtracting the concentration after completing treatment from that at the baseline. Results Subjects who carried the Catalase CC genotype had significantly higher salivary MnSOD or catalase levels. The MnSOD genotype had a significant effect on the percentage of PDs of 4~9 mm (p = 0.02), and salivary ΔMnSOD had a significant effect on the PlI (p = 0.03). The Catalase genotype had a significant effect on the PlI (p = 0.01~0.04), but the effect was not found for the mean PlI or PD. There was a significant interaction between the MnSOD genotype and salivary ΔMnSOD on PDs of 4~9 mm. After adjusting for gender, years of schooling, smoking status, and alcohol consumption, subjects with ΔMnSOD of

Background/purpose: Many studies have confirmed that periodontal disease interacts with diabetes. The aim of this study was to examine whether the advanced glycosylated end products (AGEs), which are generated by diabetics, have important effects on the osteogenic differentiation of periodontal ligament stem cells (PDLSCs). Materials and methods: In this study PDLSCs were isolated from the periodontal ligaments of extracted third molar teeth. The subjects were divided into two groups, which included the normal control group (N-PDLSCs) and the AGEs-stimulating group (A-PDLSCs). Changes of receptor of AGEs (RAGE) and cumulative ROS in PDLSCs were monitored by western blot and flow cytometry, respectively. Results: In the study AGEs noticeably inhibited the osteogenic differentiation of PDLSCs, with significant lower calcification nodules detected in A-PDLSCs (P

Guided-bone regeneration (GBR) is increasingly using three-dimensional (3D) printing by fused deposition modeling (FDM) to build the filaments used for treatment. Polylactic acid (PLA) and beta-tricalcium phosphate (β-TCP) are widely used as base materials in 3D printing, necessitating that they are studied together in the context of GBR treatment. This study sought to test and compare the properties and efficacy of different ratios of β-TCP and PLA used to make the 3D-printed filament material to find the most effective combination of materials for GBR treatment. Several ratios of PLA to β-TCP were tested, including PLA/β-TCP ratios of 95%/5% (PLA-5), 90%/10% (PLA-10), 85%/15% (PLA-15), and 80%/20% (PLA-20), and quantitative real-time polymerase chain reaction (qPCR) in vitro testing was done to characterize the material. After adding β-TCP to PLA, mechanical testing indicated that tensile and elongation strengths decreased, hardness was retained, and cell proliferation was promoted. The effect of PLA and β-TCP on increasing alkaline phosphatase (ALP) activity was significantly greater in a ratio of 10% β-TCP/90% PLA at 5 days (p < 0.05) than in any other ratios tested. This is supported by results from qPCR testing, which showed early osteoblast-like differentiation of DLX5, RUNX2, OPG, OC, and collagen type 1 (COL-1) expression levels similar to cells cultured on PLA-10. Our results demonstrated that 3D printing of filaments produced in a ratio of 90% PLA to 10% β-TCP was more effective for GBR than that of filaments produced only using PLA.

A major number of studies have demonstrated Beta-tricalcium phosphate (β-TCP) biocompatibility, bioactivity, and osteoconductivity characteristics in bone regeneration. The aim of this research was to enhance β-TCP's biocompatibility, and evaluate its physicochemical properties by argon glow discharge plasma (GDP) plasma surface treatment without modifying its surface. Treated β-TCP was analyzed by scanning electron microscopy (SEM), energy-dispersive spectrometry, X-ray photoelectron spectroscopy (XPS), X-ray diffraction analysis, and Fourier transform infrared spectroscopy characterization. To evaluate treated β-TCP biocompatibility and osteoblastic differentiation, water-soluble tetrazolium salts-1 (WST-1), immunofluorescence, alkaline phosphatase (ALP) assay, and quantitative real-time polymerase chain reaction (QPCR) were done using human mesenchymal stem cells (hMSCs). The results indicated a slight enhancement of the β-TCP by GDP sputtering, which resulted in a higher Ca/P ratio (2.05) than the control. Furthermore, when compared with control β-TCP, we observed an improvement of WST-1 on all days (p p p

Mineral trioxide aggregate (MTA) is widely used in various dental endodontic applications such as root-end filling, furcal perforation repair, and vital pulp therapy. In spite of many attempts to improve handling properties and reduce the discoloration of MTA, the ideal root canal filling material has yet to be fully developed. The objective of this study was to investigate the setting time, mechanical properties, and biocompatibility of MTA set by a silk fibroin solution. A 5 wt% silk fibroin (SF) solution (a novel hydration accelerant) was used to set SavDen&reg, MTA and ProRoot&reg, white MTA (WMTA). Changes in setting time, diametral tensile strength (DTS), material crystallization, in vitro cell viability, and cell morphology were assessed by Vicat needle measurement, a universal testing machine, scanning electron microscopy (SEM), and WST-1 assay, respectively. The initial setting time of ProRoot&reg, MTA and SavDen&reg, MTA experienced a drastic decrease of 83.9% and 42.1% when deionized water was replaced by 5 wt% SF solution as the liquid phase. The DTS of SavDen&reg, MTA showed a significant increase after set by the SF solution in 24 h. A human osteoblast-like cell (MG-63)-based WST-1 assay revealed that both ProRoot&reg, MTA hydrated using SF solution did not significantly differ (p &gt, 0.05) in cell viability. MG-63 cells with pseudopodia attachments and nuclear protrusions represent a healthier and more adherent status on the surface of MTA when set with SF solution. The results suggest that the 5 wt% SF solution may be used as an alternative hydration accelerant for MTA in endodontic applications.

The objective of this study was to evaluate the antibacterial efficacy against Enterococcus faecalis and Streptococcus mutans and in vivo toxicity using embryonic zebrafish assays of sodium hypochlorite (NaOCl) and electrolyzed oxidizing (EO) water (containing hypochlorous acid (HOCl))-based root canal irrigating solutions. Methodology: Using 100 μL microbial count of 1 × 108 cfu/mL Enterococcus faecalis to mix with each 10 mL specimen of NaOCl or HOCl for designed time periods. The above protocol was also repeated for Streptococcus mutans. The concentration of viable microorganisms was estimated based on each standardized inoculum using a plate-count method. Zebrafish embryo assays were used to evaluate acute toxicity. Results: All the HOCl or NaOCl treatment groups showed &gt, 99.9% antibacterial efficacy against Enterococcus faecalis and Streptococcus mutans. Zebrafish embryos showed almost complete dissolution in 1.5% NaOCl within 5 min. Both survival rates after being treated with 0.0125% and 0.0250% HOCl for 0.5 min or 1.0 min were similar to that of E3 medium. Conclusions: Both NaOCl and HOCl revealed similar antibacterial efficacy (&gt, 99.9%) against Enterococcus faecalis and Streptococcus mutans. While 1.5% NaOCl fully dissolved the Zebrafish embryos, both 0.0125% and 0.0250% HOCl showed little in vivo toxicity, affirming its potential as an alternative irrigation solution for vital pulp therapy.

The objective of this study was to verify the feasibility of electrolyzed oxidizing (EO) water as a mouthwash through the evaluation of its in vivo toxicity by embryonic zebrafish and antimicrobial efficacy against Streptococcus mutans (S. mutans). Methodology: Each 1.5&ndash, 3.0 g of sodium chloride (NaCl), sodium bromide (NaBr), or calcium chloride (CaCl2) were added into an electrolyzer with 300 mL of DD water to produce electrolyzed oxidizing (EO) water. A zebrafish embryo assay was used to evaluate acute toxicity of specimens. Antimicrobial property was conducted with 100 &mu, L microbial count of 1 &times, 108 cfu/mL S. mutans to blend with each 10 mL specimen of chlorhexidine (CHX) gluconate or hypochlorous acid (HOCl) for various time points. The concentration of viable microorganisms was assessed according to individually standardized inoculum by a plate-count method. Results: Among the EO water produced from NaCl, NaBr, and CaCl2, the EO water from NaCl showed a relatively low mortality rate of zebrafish embryos and was chosen for a detailed investigation. The mortality rates for the groups treated with EO water containing 0.0125% and 0.0250% HOCl were not statically different from those of a negative control, however the mortality rate was 66.7 &plusmn, 26.2% in 0.2% CHX gluconate for the same treatment time of 0.5 min. All of the HOCl or 2.0% CHX gluconate groups showed &gt, 99.9% antimicrobial effectiveness against S. mutans, while the 0.2% CHX gluconate group showed a bacterial reduction rate of 87.5% and 97.1% for treatment times of 0.5 min and 1.0 min, respectively. Conclusions: Except for the 0.2% CHX gluconate, all the HOCl specimens and 2.0% CHX gluconate revealed similar antimicrobial properties (&gt, 99.9%) against S. mutans. The EO water comprised of both 0.0125% and 0.0250% HOCl showed &gt, 99.9% antimicrobial efficacy but with little in vivo toxicity, illuminating the possibility as an alternative mouthwash for dental and oral care.

The benefits and feasibility of platform switching have been discussed in several studies, reporting lesser crestal bone loss in platform-switched implants than in platform-matched implants. Objective. The aim of the present study was to observe the changes in vertical and horizontal marginal bone levels in platform-switched and platform-matched dental implants. Materials and Methods. 51 patients received 60 dental implants in the present study over a 1-year period. Measurement was performed between the implant shoulder and the most apical and horizontal marginal defect by periapical radiographs to examine the changes of peri-implant alveolar bone before and 12 months after prosthodontic restoration delivery. Results. These marginal bone measurements showed a bone gain of 0.23±0.58 mm in the vertical gap and 0.22±0.53 mm in the horizontal gap of platform matching, while in platform switching a bone gain of 0.93±1 mm (P<0.05) in the vertical gap and 0.50±0.56 mm in the horizontal gap was found. The average vertical gap reduction from the baseline until 12 months was 0.92±1.11 mm in platform switching and 0.29±0.85 mm in platform matching (P<0.05). Conclusions. Within the limitations of the present study, platform switching seemed to be more effective for a better peri-implant alveolar bone vertical and horizontal gap reduction at 1 year.

Due to autogenous bone limitations, some substitute bone grafts were developed. Collagenated porcine graft (CPG) is able to regenerate new bone, although the number of studies is insufficient, highlighting the need for future studies to better understand the biomaterial. In order to understand better CPG&prime, s possible dental guided bone regeneration indications, the aim of this work was to determine CPG&prime, s biological capacity to induce osteoblast differentiation in vitro and guided bone regeneration in vivo, whilst being compared with commercial hydroxyapatite and beta tricalcium phosphate (HA/&beta, TCP) and porcine graft alone. Cell cytotoxicity (WST-1), alkaline phosphatase activity (ALP), and real-time polymerase chain reaction (qPCR) were assessed in vitro. Critical size defects of New Zealand white rabbits were used for the in vivo part, with critical size defect closures and histological analyses. WST-1 and ALP indicated that CPG directly stimulated a greater proliferation and confluency of cells with osteoblastic differentiation in vitro. Gene sequencing indicated stable bone formation markers, decreased resorption makers, and bone remodeling coupling factors, making the transition from osteoclast to osteoblast expression at the end of seven days. CPG resulted in the highest new bone regeneration by osteoconduction in critical size defects of rabbit calvaria at eight weeks. Nonetheless, all biomaterials achieved nearly complete calvaria defect closure. CPG was found to be osteoconductive, like porcine graft and HA/&beta, TCP, but with higher new bone formation in critical size defects of rabbit calvaria at eight weeks. CPG can be used for different dental guided bone regeneration procedures, however, further studies are necessary.

Peri-implantitis has become a common complication, accompanied by soft tissue inflammation. Porphyromonas gingivalis infection is the major cause of inflammation and progressive bone loss in the jaws. The surface property of titanium implants is a key factor in the alteration of osseointegration and P. gingivalis adhesion. However, the interplay between P. gingivalis and the surface properties of implants, subjected to different treatments, is not well described. Therefore, we focused on the surface properties of titanium implants, titanium disks that were autoclaved alone were used as controls. Those that were autoclaved and then subjected to low-temperature plasma (LTP) at 85 W and 13.56 MHz and with 100 mTorr of argon gas at room temperature for 15 min formed the experimental group. LTP-treated disks had smoother surfaces than the control group disks. The physical properties, such as scanning electron microscope (SEM), energy dispersive X-ray spectrometer (EDX), and X-ray photoelectron spectroscopy (XPS), demonstrated the surface composition was changed after LTP treatment. Further, osteoblastic cell proliferation enhancement was observed in the LTP-treated titanium surfaces. The results also revealed relatively less P. gingivalis adhesion to the LTP-treated disks than on the control disks on spectrophotometry and SEM. These findings clarified that P. gingivalis adhesion is reduced in implants subjected to LTP treatment. Thus, LTP treatment of peri-implantitis with the settings used in the present study is an option that needs further investigation.

For proper primary teeth space to be secured and full function of primary dentition maintained, when there is deep caries found in primary teeth, pulpotomy has been quite a good choice among vital pulp therapies with a predictable success rate found in the past clinical trials.1 The objective of primary tooth pulpotomy which is usually composed of coronal pulp removal, dressing of medicament and final restoration for coronal seal,2,3 is to preserve vitality of pulp tissue in the roots and let the tooth exfoliate naturally. Agents were used in pulpotomy like formocresol (FC) and MTA.1,4, 5, 6 MTA is composed of tricalcium silicate, tricalcium aluminate and tricalcium oxide and silicate oxide and introduced by Torabinejad in 1993.7 MTA has many advantages such as good biocompatibility and sealing ability,8 antibacterial effect9 and low cytotoxicity. Also, MTA helps to induce hard tissue formation from pulp tissue.10,11 These above-mentioned characteristics showed that MTA is suitable for pulpotomy.9, 10, 11, 12 In the past studies the success rate between MTA and FC has been investigated, some concluded no significant differences between the two materials, whereas others found one material might be more suitable than the other for pulpotomy.5,13,14 SavDen MTA (Taipei, Taiwan), with improved handling property and shortened setting time,15,16 has been introduced as an alternative to ProRoot MTA for the resemblance of the composition and demonstrated similar characteristics to ProRoot MTA. Further clinical studies are needed for reveal the difference between SavDen MTA, ProRoot MTA and FC. The aim of this study was to compare the clinical and radiographic success rate of pulpotomy with SavDen MTA, ProRoot MTA and FC.

Periodontitis is an inflammatory disease, wherein endogenous antioxidants help to balance the inflammatory status. Oral health behaviors are related to the periodontal disease status. The aim of this study was to explore the associations between oral health behaviors and endogenous antioxidants in periodontitis patients. In total, 225 subjects diagnosed with periodontitis were enrolled in the study. Information obtained from the initial interview included socioeconomic and demographic characteristics, lifestyle factors, and oral health-related behaviors. The clinical periodontal parameters evaluated included bleeding on probing (BOP), the plaque index (PI), and probing depth (PD). Stimulated saliva was collected before periodontal therapy to determine five endogenous antioxidants (copper-zinc superoxide dismutase (Cu/Zn SOD), manganese SOD (MnSOD), thioredoxin 1 (Trx1), peroxiredoxin 2 (Prx2), and catalase (CAT)). When these five factors were adjusted for in patients whose last previous dental visit was &gt, 1 year, the patients’ PI, BOP, and PD showed significant decreases because of an elevation in the Cu/Zn SOD level. Associations of endogenous antioxidants with levels of clinical periodontal parameters were much higher in subjects whose last previous dental visit was &gt, 1 year, compared to subjects whose last previous dental visit was &lt, 1 year. This study provides a better understanding of dental visit patterns and the salivary endogenous antioxidants that may underlie the symptomatic development of preclinical periodontitis.

The effect of comorbidity on lung cancer patients’ survival has been widely reported. The aim of this study was to investigate the effects of comorbidity on the establishment of the diagnosis of lung cancer and survival in lung cancer patients in Taiwan by using a nationwide population-based study design. This study collected various comorbidity patients and analyzed data regarding the lung cancer diagnosis and survival during a 16-year follow-up period (1995–2010). In total, 101,776 lung cancer patients were included, comprising 44,770 with and 57,006 without comorbidity. The Kaplan–Meier analyses were used to compare overall survival between lung cancer patients with and without comorbidity. In our cohort, chronic bronchitis patients who developed lung cancer had the lowest overall survival in one (45%), five (28.6%), and ten years (26.2%) since lung cancer diagnosis. Among lung cancer patients with nonpulmonary comorbidities, patients with hypertension had the lowest overall survival in one (47.9%), five (30.5%), and ten (28.2%) years since lung cancer diagnosis. In 2010, patients with and without comorbidity had 14.86 and 9.31 clinical visits, respectively. Lung cancer patients with preexisting comorbidity had higher frequency of physician visits. The presence of comorbid conditions was associated with early diagnosis of lung cancer.

The aim of this study was to assess the knowledge, attitude, and practice regarding early childhood caries (ECC) prevention and implementation of medical setting-based caries prevention among pediatricians and dentists in Taiwan. Data were collected from currently practicing pediatricians and general and pediatric dentists using self-administered questionnaires. A total of 301 questionnaires were completed by the pediatricians (n = 105), general dentists (n = 117), and pediatric dentists (n = 79). The pediatric dentists obtained significantly higher knowledge and practice scores than the general dentists and pediatricians (p < 0.0001). The pediatricians’ attitude score related to engaging physicians in medical office-based caries prevention was significantly higher than the attitude scores of the general and pediatric dentists (p < 0.05). A Spearman rank correlation analysis indicated a significant positive correlation between knowledge and practice among the general dentists (rs = 0.271, p < 0.01) and pediatricians (rs = 0.262, p < 0.01). The correlation between knowledge and attitude among the pediatricians was significantly positive (rs = 0.242, p < 0.05). Attitude and practice among the pediatricians were significantly positively correlated (rs = 0.271, p < 0.01). Pediatricians lacked ECC-related knowledge; however, they had a more positive attitude toward medical office-based prevention when they had a higher level of knowledge. Oral health-related education for pediatricians is necessary if such medical office-based caries prevention programs are to be implemented in Taiwan.

Decision tree (DT) analysis was applied in this cross-sectional study to investigate caries experience in children by using clinical and microbiological data obtained from parent–child pairs. Thirty pairs of parents and children were recruited from periodontal and pediatric dental clinics. All participants were clinically examined for caries and periodontitis by a calibrated examiner. Cariogenic and periodontopathic bacteria examinations were conducted. The Kendall rank correlation coefficient was used to measure the association between data variables obtained through clinical and microbiological examinations. A classificatory inductive decision tree was generated using the C4.5 algorithm with the top-down approach. The C4.5 DT analysis was applied to classify major influential factors for children dental caries experience. The DT identified parents’ periodontal health classification, decayed, missing, filled permanent teeth (DMFT) index, periodontopathic test (PerioCheck) result, and periodontal pocket depth as the classification factors for children caries experience. 13.3% of children were identified with a low decayed, missing, filled primary teeth (dmft) index (dmft < 3) whose parents had a periodontal pocket depth ≤3.7, PerioCheck score >1, DMFT index 2. The DT model for this study sample had an accuracy of 93.33%. Here, parental periodontal status and parents’ DMFT were the factors forming the DT for children’s caries experience.

The biocharacteristics of xenogeneic grafts make them a possible substitute for autogenous bone grafts in dental bone graft procedures. This study aimed to develop a novel porcine graft with collagen capable of generating new bone in bone defects via osteoconduction over 8 weeks of healing and to compare it with a porcine graft. The porcine collagen graft was made to undergo a cell viability test (MTT) and alkaline phosphatase assay (ALP). The surgical procedure was performed in 20 male adult New Zealand white rabbits. Four calvarial critical-size defects of 6 mm in diameter were prepared in each rabbit. The upper left defect was filled with a porcine graft of 500–1000 μm, the upper right with a porcine collagen graft, the lower left with hydroxyapatite/beta-tricalcium phosphate and the lower right served as the control without any filling material. The rabbits were divided and sacrificed at 2, 4, 6 and 8 weeks after surgery. Histological and micro-CT scan results showed that the performance of the porcine collagen graft is superior for regenerating new bone. Porcine collagen graft showed cell viability and osteoblast-like cell differentiation in vitro. The results indicate that porcine collagen graft is a potential bone substitute for clinical application.

The aim of this study was to evaluate the associations between cigarette use and five salivary oxidative stress biomarkers, copper-zinc superoxide dismutase (Cu/Zn SOD), manganese superoxide dismutase (MnSOD), catalase, thioredoxin-1 (TRX1), and peroxiredoxin-2 (PRX2), to assess the effectiveness of non-surgical periodontal therapy. Materials and Methods: This is an observational study,167 patients diagnosed with periodontitis were recruited. Both saliva samples and clinical measurements (plaque index (PI), bleeding on probing (BOP), and pocket depth (PD)) were taken at baseline and after completing non-surgical periodontal therapy. The Levels of salivary biomarkers were determined using a MILLIPLEX® MAP Human Oxidative Stress Magnetic Bead Panel kit. The overall reductions in PI and BOP were 31.56% and 42.16%, respectively. BOP reduction after treatment in female or male non-smokers was significantly higher than in male former smokers (p

Purpose. To compare the biocompatibility and antimicrobial effectiveness of the new Fast-Set MTA (FS-MTA) with ProRoot MTA (RS-MTA). Methods. The agar overlay method with neutral red dye was used. L929 mouse fibroblast cells were cultured. The liquid and oil extracts and solid test material were placed on the agar overlay, four samples for each material. Phenol was used as the positive control and cottonseed oil and MEM extracts were used as negative controls. Cytotoxicity was examined by measuring the zones of decolorization and evaluating cell lysis under an inverted microscope using the established criteria after 24 and 48 hours. The antimicrobial test was performed using the Kirby-Bauer disk-diffusion method against S. mutans, E. faecalis, F. nucleatum, P. gingivalis, and P. intermedia. The size of the zone of inhibition was measured in millimeters. Results. There was no zone of decolorization seen under or around the test materials for FS-MTA and RS-MTA at 24 and 48 hours. The antimicrobial test demonstrated no inhibitory effect of FS-MTA or RS-MTA on any bacterial species after 24 and 48 hours. Conclusions. There was no cytotoxicity or bacterial inhibition observed by the new Fast-Set MTA when compared to the ProRoot MTA after setting.

The objective of this study is to investigate the synergistic effects of acid etching and metal-ion chelation in dental smear layer removal using wasted Ganoderma tsugae derived chitosans. The wasted Ganoderma tsugae fruiting body was used to prepare both acid-soluble fungal chitosan (FCS) and alkali-soluble polysaccharide (ASP). To explore the effective irrigant concentration for smear layer removal, a chelating effect on ferrous ions was conducted. Specimens of various concentrations of EDTA, citric acid, and polysaccharide solutions were reacted with FerroZine&trade, then the absorbance was examined at 562 nm by a UV-visible spectrophotometer to calculate their metal chelating capability. Twenty extracted premolars were instrumented and individually soaked in the solutions of 15 wt% EDTA, 10 wt% citric acid, 0.04 wt% ASP, 0.04 wt% FCS, and normal saline were randomly divided into five groups (N=4). Next, each tooth was cleaved longitudinally and examined by scanning electron microscopy (SEM) to assay the effectiveness of smear layer removal. The chelating capability for EDTA, FCS, and ASP showed no significant difference over the concentration of 0.04 wt% (p &gt, 0.05). The SEM results showed that 0.04 wt% FCS solution was effective in smear layer removal along the canal wall. These results indicated that Ganoderma tsuage derived FCS in acid solutions could be a potential alternative as a root canal irrigant solution due to its synergistic effect.

For years, in order to improve bone regeneration and prevent the need of a second stage surgery to remove non-resorbable membranes, biological absorbable membranes have gradually been developed and applied in guided tissue regeneration (GTR). The present study’s main objective was to achieve space maintenance and bone regeneration using a new freeze-dried developed porcine collagen membrane, and compare it with an already commercial collagen membrane, when both were used with a bovine xenograft in prepared alveolar ridge bone defects. Prior to surgery, the membrane’s vitality analysis showed statistically significant higher cell proliferation in the test membrane over the commercial one. In six beagle dogs, commercial bone xenograft was packed in lateral ridge bone defects prepared in the left and right side and then covered with test porcine collagen membrane or commercial collagen membrane. Alveolar height changes were measured. Histomorphometric results, in vitro and in vivo properties indicated that the new porcine collagen membrane is biocompatible, enhances bone xenograft osteoconduction, and reduces the alveolar ridge height reabsorption rate.

Past studies in humans have demonstrated horizontal and vertical bone loss after six months following tooth extraction. Many biomaterials have been developed to preserve bone volume after tooth extraction. Type I collagen serves as an excellent delivery system for growth factors and promotes angiogenesis. Calcium phosphate ceramics have also been investigated because their mineral chemistry resembles human bone. The aim of this study was to compare the performance of a novel bioresorbable purified fibrillar collagen and hydroxyapatite/β-tricalcium phosphate (HA/β-TCP) ceramic composite versus collagen alone and a bovine xenograft-collagen composite in beagles. Collagen plugs, bovine graft-collagen composite and HA/β-TCP-collagen composite were implanted into the left and right first, second and third mandibular premolars, and the fourth molar was left empty for natural healing. In total, 20 male beagle dogs were used, and quantitative and histological analyses of the extraction ridge was done. The smallest width reduction was 19.09% ± 8.81% with the HA/β-TCP-collagen composite at Week 8, accompanied by new bone formation at Weeks 4 and 8. The HA/β-TCP-collagen composite performed well, as a new osteoconductive and biomimetic composite biomaterial, for socket bone preservation after tooth extraction.

Modification of the physiochemical properties of titanium surfaces using glow discharge plasma (GDP) and fibronectin coating has been shown to enhance the surface hydrophilicity, surface roughness, cell adhesion, migration, and proliferation. Thisin vivostudy aimed to evaluate the bone integration efficacy of a biologically modified implant surface. Two different surface-modified implants (Ar-GDP and GDP-fib) were placed in the mandibular premolar area of six beagle dogs for 2–8 weeks. Three techniques [histologic evaluation, resonance frequency analysis (RFA), and microcomputed tomography (micro-CT) evaluation] were used to detect the implant stability and bone-implant contact. The implant stability quotient values of GDP-fib implants were significantly greater than the Ar-GDP implants at 2 and 4 weeks (P<0.01). The bone volume/total volume ratio of GDP-fib implants was greater than the Ar-GDP implants in micro-CT evaluation. A high positive correlation was observed between RFA and micro-CT measurements. At 2 weeks, osteoblasts were seen to line the implant surface, and multinuclear osteoclasts could be seen on the surface of old parent bone. After 8 weeks, a majority of the space in the wound chamber appeared to be replaced by bone. Enhancement of the stability of biologically modified implants was proved by the results of RFA, micro-CT, and histological analysis. This enhanced stability may help fasten treatment and be clinically beneficial.

BACKGROUND:Glow discharge plasma (GDP) procedure is an effective method for grafting various proteins, including albumin, type I collagen, and fibronectin, onto a titanium surface. However, the behavior and impact of titanium (Ti) surface modification is yet to be unraveled. PURPOSE:The purpose of this study is to evaluate and analyze the biological properties of fibronectin-grafted Ti surfaces treated by GDP. MATERIALS AND METHODS:Grade II Ti discs were initially cleaned and autoclaved to obtain original specimens. Subsequently, the specimens were GDP treated and grafted with fibronectin to form Ar-GDP (Argon GDP treatment only) and GDP-fib (fibronectin coating following GDP treatment) groups. Blood coagulation test and MG-63 cell culture were performed to evaluate the biological effects on the specimen. RESULTS:There was no significant difference between Ar-GDP and GDP-fib groups in blood compatibility analysis. While in the MTT test, cellular proliferation was benefited from the presence of fibronectin coating. The numbers of cells on Ar-GDP and GDP-fib specimens were greater than those in the original specimens after 24 h of culturing. CONCLUSIONS:GDP treatment combined with fibronectin grafting favored MG-63 cell adhesion, migration, and proliferation on titanium surfaces, which could be attributed to the improved surface properties.

Glow discharge plasma (GDP) treatments of biomaterials, such as hydroxyapatite/β-tricalcium phosphate (HA/β-TCP) composites, produce surfaces with fewer contaminants and may facilitate cell attachment and enhance bone regeneration. Thus, in this study we used argon glow discharge plasma (Ar-GDP) treatments to modify HA/β-TCP particle surfaces and investigated the physical and chemical properties of the resulting particles (HA/β-TCP + Ar-GDP). The HA/β-TCP particles were treated with GDP for 15 min in argon gas at room temperature under the following conditions: power: 80 W; frequency: 13.56 MHz; pressure: 100 mTorr. Scanning electron microscope (SEM) observations showed similar rough surfaces of HA/β-TCP + Ar-GDP HA/β-TCP particles, and energy dispersive spectrometry analyses showed that HA/β-TCP surfaces had more contaminants than HA/β-TCP + Ar-GDP surfaces. Ca/P mole ratios in HA/β-TCP and HA/β-TCP + Ar-GDP were 1.34 and 1.58, respectively. Both biomaterials presented maximal intensities of X-ray diffraction patterns at 27° with 600 a.u. At 25° and 40°, HA/β-TCP + Ar-GDP and HA/β-TCP particles had peaks of 200 a.u., which are similar to XRD intensities of human bone. In subsequent comparisons, MG-63 cell viability and differentiation into osteoblast-like cells were assessed on HA/β-TCP and HA/β-TCP + Ar-GDP surfaces, and Ar-GDP treatments led to improved cell growth and alkaline phosphatase activities. The present data indicate that GDP surface treatment modified HA/β-TCP surfaces by eliminating contaminants, and the resulting graft material enhanced bone regeneration.

Introduction: The objective of this in vitro study is to evaluate the effective and long-term occlusion of dentinal tubules using a novel calcium lactate phosphate (CLP) based desensitizing agent. Methods: Dentin disks (n = 9) were pre-etched using 1 M lactic acid for 30 s and individually treated with Colgate® Pro-Relief™ paste, CLP paste, and double distilled water (ddH2O) by a rubber-cupped handpiece. Dentin disks were analyzed under optical micrographs for pre-treatment, directly after treatment, and 14 days post-treatment. One-way ANOVA and post-hoc Tukey’s test were used to determine whether there were any statistically significant differences in dentinal tubule diameter. Results: A significant decrease occurred in the mean tubule diameter for dentin disks treated with CLP paste. A decrease was observed from 3.52 ± 0.83 µm to 2.62 ± 0.42 µm right after treatment, further decreasing to 1.71 ± 0.45 µm after immersion in artificial saliva for 14 days (p < 0.05). Conclusions: The results suggest that the CLP based desensitizing paste has remineralization properties and provides instant and lasting effectiveness in dentinal tubule occlusion.