Search

The ligamentum flavum (LF), the inter- and supraspinous ligament (ISLSSL) and the intertransverse ligament (ITL) are relevant spinal structures for segmental stability. The biomechanical effect of degeneration and aging on their biomechanical properties remains largely unknown.The aim of this study was to assess the material properties of the ITL, ISLSSL and LF and to correlate parameters of biomechanical function with LF-thickness, intervertebral disc (IVD) degeneration and age.Biomechanical cadaveric study.MRI- and CT-scans of 50 human lumbar segments (Th12-L5) were used to assess the ISL (acc. to Keorochana), the grade of IVD degeneration (acc. to Pfirrmann) and to quantify LF-thickness. The ITL, ISLSSL and LF were resected in the neutral position of the spinal segment with a specifically developed method to conserve initial strain. Ramp to failure testing was performed (0.5 mm/s) to record initial tension, slack length, stiffness and ultimate strength. The relationship between the biomechanical characteristics and age and radiological parameters were analyzed. There are no study-specific conflicts of interest and no external funding was received for this study.With aging, a significant reduction in initial tension (r=-0.5, p.01) and ultimate strength (r=-0.41, p.01) of the LF was observed, while the effect on LF-stiffness and the characteristics of the other ligaments was non-significant. IVD-degeneration was correlated with a significant reduction in stiffness (r=-0.47, p=.001; r=-0.36, p=.01) and ultimate strength (r=-0.3, p=.04; r=-0.36, p=.01) of the LF and ISLSSL respectively and a significant reduction in initial tension (r=-0.4, p.01) of the LF. For the ITL, no significant correlation was observed. Comparing Pfirrman 2 to 5, this reduction was 40% to 80% for stiffness 60% to 70% for ultimate strength and 88% for initial tension of the LF. ISLSSL-stiffness between Kerorochana grade A and D differed significantly (p=.03), while all other comparisons were non-significant (p.05). LF-thickness did not correlate with the biomechanical properties of the LF (p.05).Aging is primarily related to biomechanical changes to the LF. IVD-degeneration is related to a relevant reduction in stiffness and ultimate strength of the LF and ISLSSL, with a similar trend for the ITL. The ISL-specific Keorochana grading system provides only minimal biomechanical information and LF-thickness does not provide biomechanical information.Patient age and the degenerative state of the IVD can be used to evaluate the biomechanical characteristics of the dorsal spinal ligaments, which can be helpful in selecting the optimal surgical procedure (e.g. in decompression surgery) for a specific situation.

The cortical bone trajectory (CBT) is an alternative to the traditional pedicle screw trajectory (TT) in posterior spinal instrumentation, enhancing screw contact with cortical bone and therefore increasing fixation strength. Additional to the trajectory, insertion depth (pericortical vs. bicortical placement) could be a relevant factor affecting the fixation strength. However, the potential biomechanical benefit of a bicortical placement of CBT screws is unknown. Therefore, the aim of this study was to quantify the fixation strength of pericortical- versus bicortical-CBT (pCBT versus bCBT) screws in a randomized cadaveric study. Pedicle screws were either placed pericortical or bicortical with a CBT in 20 lumbar vertebrae (2 × 20 instrumented pedicles) from four human spine cadavers by using patient-specific templates. Instrumented specimens underwent physiological cyclic loading testing (1′800′000 cycles, 10 Hz), including shear and tension loads as well as bending moments. Translational and angular displacements of the screws were quantified and compared between the two techniques. There was a slight decrease in translational (0.2 mm ± 0.09 vs. 0.24 mm ± 0.11) and angular displacements (0.06° ± 0.05 vs. 0.13° ± 0.11) of bCBT screws when compared with pCBT screws after 1′800′000 cycles. However, the results were non-significant (p > 0.05). The authors do not recommend placing CBT screws bicortically, as no relevant biomechanical advantage is gained while the potential risk for iatrogenic injury to structures anterior to the spine is increased.

Purpose Dorsal screw-rod instrumentations are used for a variety of spinal disorders. Cross-links (CL) can be added to such constructs, however, no clear recommendations exist. This study aims to provide an overview of the available evidence on the effectiveness of CL, potentially allowing to formulate recommendations on their use. Methods A systematic literature review was performed on PubMed and 37 original articles were included and grouped into mechanical, biomechanical, finite element and clinical studies. The change in range of motion (ROM) was analyzed in mechanical and biomechanical studies, ROM, stiffness and stress distribution were evaluated in finite element studies and clinical outcome parameters were analyzed in clinical studies. Results A relative consistent reduction in ROM in axial rotation with CL-augmentation was reported, while minor and less consistent effects were observed in flexion–extension and lateral bending. The use of CLs was clinical beneficial in C1/2 fusion, while the limited clinical studies on other anatomic regions show no significant benefit for CL-augmentation. Conclusion While CL provides some additional axial rotation stability in most situations, lateral bending and flexion–extension are less affected. Based on clinical data, CL-augmentation can only be recommended for C1/2 instrumentations, while for other cases, further clinical studies are needed to allow for evidence-based recommendations., European Spine Journal, 3 (1), ISSN:0940-6719, ISSN:1432-0932, ISSN:001991155

Background Context The contribution of anatomical structures to the stability of the spine is of great relevance for diagnostic, prognostic and therapeutic evaluation of spinal pathologies. Although a plethora of literature is available, the contribution of anatomical structures is still not well understood. Purpose We aimed to quantify the biomechanical relevance of each of the passive spinal structure trough deliberate biomechanical test series using a stepwise reduction approach on cadavers. Study design Biomechanical cadaveric study. Methods Fifty lumbar spinal segments originating from 22 human lumbar cadavers were biomechanically tested in a displacement-controlled stepwise reduction study: the intertransverse ligaments, the supraspinous and interspinous ligaments, the facet joint capsules (FJC), the facet joints (FJ), the ligamentum flavum (LF), the posterior longitudinal ligament (PLL), and the anterior longitudinal ligament were subsequently reduced. In the intact state and after each transection step, the segments were physiologically loaded in flexion, extension, axial rotation (AR), lateral bending (LB) and with anterior (AS), posterior (PS) and lateral shear (LS). Thirty-two specimens with only minor degeneration, representing a reasonably healthy subpopulation, were selected for the here presented evaluation. Quantitative values for load and spinal level dependent contribution patterns for the anatomical structures were derived. Results Small variability between of the contribution patterns are observed. The intervertebral disc (IVD) is exposed to about 67% of the applied load in LB and during shear loading, but less by load in flexion, extension and AR (less than 35%). The FJ&FJC are the main stabilizers in AR with 49%, but provide only 10% of the stability in extension. Beside the IVD, the LF and the PLL contribute mainly in flexion (22% and 16%, respectively), while the ALL plays a major role during extension (40%) and also contributes during LB (15%). The contribution of the intertransverse ligaments and the supraspinous and interspinous ligaments are very small in all loading directions ( Conclusion The IVD takes the main load in LB and absorbs shear loading, while the FJ&FJC stabilize AR. The ALL resists extension while LF and PLL stabilize flexion. With the small variability of contribution patterns, suggesting distinct adaptation of the structures to one another, the biomechanical characteristics of one structure have to be put in context of the whole spinal segment. CLINICAL SIGNIFICANCE The novel information on load distribution helps predict the biomechanical consequences of surgical procedures in more detail.

Background Anterior scoliosis correction is a powerful technique with the disadvantage of a kyphotic effect on lumbar and thoracolumbar curves. We aimed to investigate whether a cognizant interposition of a rib graft anteriorly and at the concave side of the scoliotic curve causes significant fulcrum effect to enforce scoliosis correction and to reduce interfusional kyphosis in anterior scoliosis corrections. Methods Twenty otherwise comparable patients with lumbar and thoracolumbar adolescent idiopathic scoliosis (AIS) curves undergoing anterior short scoliosis correction with (n = 10) or without (n = 10, matched for age, gender and degree of deformity) fulcrum effect were retrospectively compared by means of radiographic measurements (sagittal and coronal profile, Cobb angles and intersegmental deformity correction angles) to evaluate the effect of this modified surgical technique. Results The overall amount of scoliosis correction was similar with 74 and 60% of initial curves of 57° and 53° in the case and control group respectively with a mean of 3 fused segments (4 screws). Statistically relevant differences were found for intersegmental coronal cobb angles at the apex of 20° to 3° and 17° to 9° with and without fulcrum, respectively (p, BMC Musculoskeletal Disorders, 22 (1), ISSN:1471-2474

Background Acetabular retroversion results in reduced range of motion, and is thought to contribute to femoroacetabular impingement. Severe retroversion can be corrected with a periacetabular osteotomy, which is a technically demanding intervention. In this study, we investigated whether increasing femoral antetorsion is a potential alternative to restore the range of motion and how this approach would affect hip joint loading. Methods Six different finite element models of the same subject were built from MRI and used to simulate different load scenarios during stance phase, including healthy and pathological configurations with different acetabular version and femoral torsion angles. The subject's gait was analysed in our gait lab and motion data as well as joint reaction forces were integrated into the model. Hip range of motion, hip abductor muscle forces as well as localization and magnitude of hip joint loads were determined. Findings The negative effects of acetabular retroversion on hip range of motion including flexion and internal rotation can be reversed by increasing femoral anteversion. The rotation of the femur furthermore affected muscular functionality by shortening the moment arms of the hip abductor muscles, resulting in increased abductor muscle forces, joint reaction forces and hip joint loading. Interpretation Even though increased femoral antetorsion can compensate for the loss of hip range of motion due to reduced acetabular version, rotational ostotomy of the proximal femur is likely to alter muscular moment arms and therefore increase hip joint load, conflicting the goal of a long-term healthy joint., Clinical Biomechanics, 87, ISSN:0268-0033, ISSN:1879-1271

Information on the local stiffness characteristics of the intervertebral disc (IVD) is crucial for the understanding of its structure-function properties in health and disease and may improve numerical modeling. Previous studies have attempted to map local tissue stiffness by sectioning the disc and performing mechanical testing on these discrete tissue units, which is technically challenging and may bias the results. Shear wave elastography (SWE) represents a nondestructive alternative that can provide spatially continuous elasticity estimates. We investigated the feasibility of SWE for human intervertebral disc elasticity mapping in a laboratory setting. To this end, global spinal segment mechanical behavior was determined in 6 loading directions and served as ground truth data for the validation of the approach. Subsequently, the cranial spinal vertebra was removed and shear wave elastographic scans of the IVD were acquired. SWE-measurements were reconstructed into three-dimensional elastographic maps, discretized into distinct IVD regions and correlated with global segment mechanical parameters. SWE-derived Young's modulus estimates were compared among different regions and as a function of their state of degeneration. We found annulus shear wave speed to be moderately correlated with segment mechanical behavior irrespective of the loading direction whereas shear wave speed in the nucleus pulposus showed a very weak association (mean (SD) absolute Pearson correlation coefficients: 0.51 (0.14) and 0.17 (0.12), respectively). Young's modulus mapping of the intervertebral disc revealed stiffness to be highest in the ventral annulus with a stiffness decrease both circumferentially towards the dorsal aspect as well as towards the center of the disc. SWE hence provides a valid alternative to disc sectioning and piecewise mechanical testing.

3D printed clamps provide multiple advantages compared to potting for the fixation of spinal specimens and in a recent study, superior fixation stability was reported. The aim of this study was to evaluate the fixation efficacy of 3D printed vertebra clamps during routine application and to present and evaluate a novel clamp for sacrum fixation. Further, public access to the template files is provided. 98 human single-level cadaveric specimens were biomechanically tested in flexion-extension (FE), lateral bending (LB), axial rotation (AR), anteroposterior shear (AS), lateral shear (LS) and axial compression-decompression (AC). Loading amplitudes were +/-7.5 Nm for FE, LB and AR, +/- 150 N for AS and LS and + 400/-100 N for AC. The novel sacrum clamp was used in 8 specimens. The median relative motion between clamps and specimens was 0.6 degrees in FE, 0.7 degrees in LB, 0.3 degrees in AR, 0.5 mm in AS, 0.5 mm in LS and 0.1 mm in AC. With sacrum clamps, the median relative motion was 0.3 degrees in FE, 0.1 degrees in LB, 0.08 degrees in AR, 0.8 mm in AS, 0.7 mm in LS and 0.2 mm in AC. The vertebra clamps used during routine testing provided better stability compared to the values in the literature in all six loading directions (p < 0.05). The sacrum clamp showed superior anchoring stability in three loading directions compared to the caudal vertebra clamps (p < 0.05), while inferior stability was measured in AS (p < 0.001). We conclude that 3D printed vertebra clamps and 3D printed sacrum clamps represent reliable methods for specimen fixation during routine biomechanical testing., Journal of Biomechanics, 125, ISSN:0021-9290, ISSN:1873-2380

Appropriate mechanical load is essential for tendon homeostasis and optimal tissue function. Due to technical challenges in achieving physiological mechanical loads in experimental tendon model systems, the research community still lacks well-characterized models of tissue homeostasis and physiological relevance. Toward this urgent goal, we present and characterize a novel ex vivo murine tail tendon explant model. Mouse tail tendon fascicles were extracted and cultured for 6 days in a load-deprived environment or in a custom-designed bioreactor applying low magnitude mechanical load (intermittent cycles to 1% strain, at 1 Hz) in serum-free tissue culture. Cells remained viable, as did collagen structure and mechanical properties in all tested conditions. Cell morphology in mechanically loaded tendon explants approximated native tendon, whereas load-deprived tendons lost their native cell morphology. These losses were reflected in altered gene expression, with mechanical loading tending to maintain tendon specific and matrix remodeling genes phenotypic of native tissue. We conclude from this study that ex vivo load deprivation of murine tendon in minimal culture medium results in a degenerative-like phenotype. We further conclude that onset of tissue degeneration can be suppressed by low-magnitude mechanical loading. Thus a minimal explant culture model featuring serum-free medium with low mechanical loads seems to provide a useful foundation for further investigations. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res.

Pedicle screws are used for the treatment of a wide variety of spinal pathologies. A good screw holding power in bone is required for treatment success, but has so far not been predictable computationally. The goal of this study was to develop an automated tool able to predict patient-specific screw fixation strength through finite element simulation. We compared the simulation results with results from biomechanical pull-out tests performed on animal lumbar specimens. Experimental and simulation pull-out strengths were highly correlated [Formula: see text] and the mean error was 20.25%. The fixation strength was also associated to great extent with pull-out stiffness and strain energy, as well as the screw size and mean vertebral density.