Search

Background: Biotherapeutics, particularly monoclonal antibodies (mAbs), are a maturing class of drugs capable of treating a wide range of diseases. Therapeutic function and solutionstability are linked to the proper three-dimensional organization of the primary sequence into Higher Order Structure (HOS) as well as the timescales of protein motions (dynamics). Methods that directly monitor protein HOS and dynamics are important for mapping therapeutically relevant protein-protein interactions and assessing properly folded structures. Irreversible covalent protein footprinting Mass Spectrometry (MS) tools, such as site-specific amino acid labeling and hydroxyl radical footprinting are analytical techniques capable of monitoring the side chain solvent accessibility influenced by tertiary and quaternary structure. Here we discuss the methodology, examples of biotherapeutic applications, and the future directions of irreversible covalent protein footprinting MS in biotherapeutic research and development. Conclusion: Bottom-up mass spectrometry using irreversible labeling techniques provide valuable information for characterizing solution-phase protein structure. Examples range from epitope mapping and protein-ligand interactions, to probing challenging structures of membrane proteins. By paring these techniques with hydrogen-deuterium exchange, spectroscopic analysis, or static-phase structural data such as crystallography or electron microscopy, a comprehensive understanding of protein structure can be obtained.

Binding of antibodies to their receptors is a core component of the innate immune system. Understanding the precise interactions between antibodies and their Fc receptors has led to the engineering of novel mAb biotherapeutics with tailored biological activities. One of the most significant findings is that afucosylated monoclonal antibodies demonstrate increased affinity toward the receptor FcγRIIIa, with a commensurate increase in antibody-dependent cellular cytotoxicity. Crystal structure analysis has led to the hypothesis that afucosylation in the Fc region results in reduced steric hindrance between antibody-receptor intermolecular glycan interactions, enhancing receptor affinity; however, solution-phase data have yet to corroborate this hypothesis. In addition, recent work has shown that the fragment antigen-binding (Fab) region may directly interact with Fc receptors; however, the biological consequences of these interactions remain unclear. By probing differences in solvent accessibility between native and afucosylated immunoglobulin G1 (IgG1) using hydroxyl radical footprinting-MS, we provide the first solution-phase evidence that an IgG1 bearing an afucosylated Fc region appears to require fewer conformational changes for FcγRIIIa binding. In addition, we performed extensive molecular dynamics (MD) simulations to understand the molecular mechanism behind the effects of afucosylation. The combination of these techniques provides molecular insight into the steric hindrance from the core Fc fucose in IgG1 and corroborates previously proposed Fab-receptor interactions. Furthermore, MD-guided rational mutagenesis enabled us to demonstrate that Fab-receptor interactions directly contribute to the modulation of antibody-dependent cellular cytotoxicity activity. This work demonstrates that in addition to Fc-polypeptide and glycan-mediated interactions, the Fab provides a third component that influences IgG-Fc receptor biology.

The antibody-drug conjugate, trastuzumab emtansine (Kadcyla), is produced by attachment of the antitubulin drug, DM1, to lysine amines via a heterobifunctional linker, SMCC (succinimidyl 4-(N-maleimidomethyl)cyclohexane-1-carboxylate). Following the reaction of the N-hydroxysuccinimide activated linker with antibody lysines to produce a linker-modified intermediate (Tmab-MCC), DM1 is added to yield the desired product. In addition to the expected distribution of drug-linked forms (from 0 to 8), mass spectrometry also demonstrates the presence of a second distribution shifted by about +222 Da. This series is consistent with the presence of a population containing a bound linker without DM1 ("unconjugated linker"). Extended characterization of trastuzumab emtansine was performed using capillary isoelectic focusing, CE-SDS, peptide mapping, and LC/MS following (18)O labeling of peptide digests to identify this family of product variants. These studies demonstrate that the presence of these +222 Da species is due to an unexpected reaction of the maleimide moiety in the MCC linker with antibody lysine residues to produce cross-linked species that cannot conjugate to DM1.

Native mass spectrometry (MS) and top-down electron-capture dissociation (ECD) combine as a powerful approach for characterizing large proteins and protein assemblies. Here we report their use to study an antibody Fab (Fab-1)-VEGF complex in its near-native state. Native ESI with analysis by FTICR mass spectrometry confirms that VEGF is a dimer in solution and that its complex with Fab-1 has a binding stoichiometry of 2:2. Applying combinations of collisionally activated dissociation (CAD), electron-capture dissociation (ECD), and infrared multiphoton dissociation (IRMPD) allows identification of flexible regions of the complex, potentially serving as a guide for crystallization and X-ray diffraction analysis.

Analysis of non-reduced and reduced monoclonal antibodies (mAbs) by capillary electrophoresis-sodium dodecyl sulfate (CE-SDS) is routinely used to detect product size variants and process-related impurities. Levels of high molecular weight (HMW) forms obtained from this method usually trend comparably to those obtained by orthogonal methods such as size-exclusion ultra-high performance liquid chromatography (SE-UHPLC). However, in the presented case study, comparison of CE-SDS data for three IgG1 mAbs (trastuzumab, mAb1, and mAb2) showed a discrepancy between amounts of observed HMW forms in mAb2 compared with its native forms determined by SE-UHPLC (~17% vs. ~0.5%, respectively). SDS chemical denaturation, as measured by differential scanning calorimetry, demonstrated that the high thermal stability of mAb2 caused an unidentified HMW peak observed by non-reduced (NR)-CE-SDS, which was the result of improper denaturing, resulting in a partially folded species. More so, this strategy enabled the rapid identification of optimal SDS concentration and temperature conditions needed for suitable denaturation for mAb2. This case study presents an alternative option for quick optimization of NR-CE-SDS methods when characterizing mAbs or other thermally stable proteins. Also, this strategy can be used to understand basic biophysical mechanisms of protein unfolding and investigate the higher-order structure imparted by specific sequences and understand how these sequences might affect the results of an analytical method such as CE-SDS.

Photostability conditions as prescribed by ICH guidelines induced highly reduction-resistant scrambled disulfides that contribute to the population of apparent nonreducible aggregates in an IgG1 mAb. Photoinduced cross-linked species were isolated under reducing conditions using an organic phase size exclusion chromatography (OP-SEC) method, followed by O18-labeling tryptic mapping to identify cross-linked peptides. Disulfide scrambling was observed within the IgG1 structurally conserved-intrachain cysteine-cysteine-tryptophan triads (Cys-Cys-Trp), and correlated with Trp-to-kynurenine (Kyn) photodegradation within these triads. We hypothesize that intrachain disulfides protect the proximal Trp within the Cys-Cys-Trp triads from photodegradation by enabling dissipation of Trp-absorbed UV energy via electron transfer to the disulfide bond. Finally, we propose three distinct mechanisms of photochemical degradation of monoclonal antibodies mediated by Trp residues.

We describe epitope mapping data using multiple covalent labeling footprinting-mass spectrometry (MS) techniques coupled with negative stain transmission electron microscopy (TEM) data to analyze the antibody-antigen interactions in a sandwich enzyme-linked immunosorbant assay (ELISA). Our hydroxyl radical footprinting-MS data using fast photochemical oxidation of proteins (FPOP) indicates suppression of labeling across the antigen upon binding either of the monoclonal antibodies (mAbs) utilized in the ELISA. Combining these data with Western blot analysis enabled the identification of the putative epitopes that appeared to span regions containing N-linked glycans. An additional structural mapping technique, carboxyl group footprinting-mass spectrometry using glycine ethyl ester (GEE) labeling, was used to confirm the epitopes. Deglycosylation of the antigen resulted in loss of potency in the ELISA, supporting the FPOP and GEE labeling data by indicating N-linked glycans are necessary for antigen binding. Finally, mapping of the epitopes onto the antigen crystal structure revealed an approximate 90° relative spatial orientation, optimal for a noncompetitive binding ELISA. TEM data shows both linear and diamond antibody-antigen complexes with a similar binding orientation as predicted from the two footprinting-MS techniques. This study is the first of its kind to utilize multiple bottom-up footprinting-MS techniques and TEM visualization to characterize the monoclonal antibody-antigen binding interactions of critical reagents used in a quality control (QC) lot-release ELISA. Graphical Abstract ᅟ.

We previously analyzed the Fab-1:VEGF (vascular endothelial growth factor) system described in this work, with both native top-down mass spectrometry and bottom-up mass spectrometry (carboxyl-group or GEE footprinting) techniques. This work continues bottom-up mass spectrometry analysis using a fast photochemical oxidation of proteins (FPOP) platform to map the solution binding interface of VEGF and a fragment antigen binding region of an antibody (Fab-1). In this study, we use FPOP to compare the changes in solvent accessibility by quantitating the extent of oxidative modification in the unbound versus bound states. Determining the changes in solvent accessibility enables the inference of the protein binding sites (epitope and paratopes) and a comparison to the previously published Fab-1:VEGF crystal structure, adding to the top-down and bottom-up data. Using this method, we investigated peptide-level and residue-level changes in solvent accessibility between the unbound proteins and bound complex. Mapping these data onto the Fab-1:VEGF crystal structure enabled successful characterization of both the binding region and regions of remote conformation changes. These data, coupled with our previous higher order structure (HOS) studies, demonstrate the value of a comprehensive toolbox of methods for identifying the putative epitopes and paratopes for biotherapeutic antibodies. Graphical abstract ᅟ.

Photostability studies are standard stress testing conducted during drug product development of various pharmaceutical compounds, including small molecules and proteins. These studies as recommended by ICH Q1B are carried out using no less than 1.2× 10(6)lux-hours in the visible region and no less than 200Wh/m(2) in UV light. However, normal drug product processing is carried out under fluorescent lamps that emit white light almost exclusively in the >400nm region with a small UV quotient. We term these as ambient or mild light conditions. We tested several IgG1 monoclonal antibodies (mAbs 1-5) under these ambient light conditions and compared them to the ICH light conditions. All the mAbs were significantly degraded under the ICH light but several mAbs (mAbs 3-5) were processed without impacting any product quality attributes under ambient or mild light conditions. Interestingly we observed site-specific Trp oxidation in mAb1, while higher aggregation and color change were observed for mAb2 under mild light conditions. The recommended ICH light conditions have a high UV component and hence may not help to rank order photosensitivity under normal protein DP processing conditions.