Search

The purpose of this study was to construct and characterize iron oxide nanoparticles (IONPCO) for intracellular delivery of the anthracycline doxorubicin (DOX; IONPDOX) in order to induce tumor cell inactivation. More than 80% of the loaded drug was released from IONPDOX within 24 h (100% at 70 h). Efficient internalization of IONPDOX and IONPCO in HeLa cells occurred through pino- and endocytosis, with both IONP accumulating in a perinuclear pattern. IONPCO were biocompatible with maximum 27.9% ± 6.1% reduction in proliferation 96 h after treatment with up to 200 µg/mL IONPCO. Treatment with IONPDOX resulted in a concentration- and time-dependent decrease in cell proliferation (IC50 = 27.5 ± 12.0 μg/mL after 96 h) and a reduced clonogenic survival (surviving fraction, SF = 0.56 ± 0.14; versus IONPCO (SF = 1.07 ± 0.38)). Both IONP constructs were efficiently internalized and retained in the cells, and IONPDOX efficiently delivered DOX resulting in increased cell death vs IONPCO.

The novel controlled and localized delivery of drug molecules to target tissues using an external electric stimulus makes electro-responsive drug delivery systems both feasible and desirable, as well as entailing a reduction in the side effects. Novel micro-scaffold matrices were designed based on poly(lactic acid) (PLA) and graphene oxide (GO) via electrospinning. Quercetin (Q), a natural flavonoid, was loaded into the fiber matrices in order to investigate the potential as a model drug for wound dressing applications. The physico-chemical properties, electrical triggering capacity, antimicrobial assay and biocompatibility were also investigated. The newly fabricated PLA/GO/Q scaffolds showed uniform and smooth surface morphologies, without any beads, and with diameters ranging from 1107 nm (10%PLA/0.1GO/Q) to 1243 nm (10%PLA). The in vitro release tests of Q from the scaffolds showed that Q can be released much faster (up to 8640 times) when an appropriate electric field is applied compared to traditional drug-release approaches. For instance, 10 s of electric stimulation is enough to ensure the full delivery of the loaded Q from the 10%PLA/1%GO/Q microfiber scaffold at both 10 Hz and at 50 Hz. The antimicrobial tests showed the inhibition of bacterial film growth. Certainly, these materials could be loaded with more potent agents for anti-cancer, anti-infection, and anti-osteoporotic therapies. The L929 fibroblast cells cultured on these scaffolds were distributed homogeneously on the scaffolds, and the highest viability value of 82.3% was obtained for the 10%PLA/0.5%GO/Q microfiber scaffold. Moreover, the addition of Q in the PLA/GO matrix stimulated the production of IL-6 at 24 h, which could be linked to an acute inflammatory response in the exposed fibroblast cells, as a potential effect of wound healing. As a general conclusion, these results demonstrate the possibility of developing graphene oxide-based supports for the electrically triggered delivery of biological active agents, with the delivery rate being externally controlled in order to ensure personalized release.

In this study, we determined the potential of polyethylene glycol-encapsulated iron oxide nanoparticles (IONPCO) for the intracellular delivery of the chemotherapeutic doxorubicin (IONPDOX) to enhance the cytotoxic effects of ionizing radiation. The biological effects of IONP and X-ray irradiation (50 kV and 6 MV) were determined in HeLa cells using the colony formation assay (CFA) and detection of γH2AX foci. Data are presented as mean ± SEM. IONP were efficiently internalized by HeLa cells. IONPCO radiomodulating effect was dependent on nanoparticle concentration and photon energy. IONPCO did not radiosensitize HeLa cells with 6 MV X-rays, yet moderately enhanced cellular radiosensitivity to 50 kV X-rays (DMFSF0.1 = 1.13 ± 0.05 (p = 0.01)). IONPDOX did enhance the cytotoxicity of 6 MV X-rays (DMFSF0.1 = 1.3 ± 0.1, p = 0.0005). IONP treatment significantly increased γH2AX foci induction without irradiation. Treatment of HeLa cells with IONPCO resulted in a radiosensitizing effect for low-energy X-rays, while exposure to IONPDOX induced radiosensitization compared to IONPCO in cells irradiated with 6 MV X-rays. The effect did not correlate with the induction of γH2AX foci. Given these results, IONP are promising candidates for the controlled delivery of DOX to enhance the cytotoxic effects of ionizing radiation.

The present study reports on the development and evaluation of nanostructured composite coatings of polylactic acid (PLA) embedded with iron oxide nanoparticles (Fe3O4) modified with Eucalyptus (Eucalyptus globulus) essential oil. The co-precipitation method was employed to synthesize the magnetite particles conjugated with Eucalyptus natural antibiotic (Fe3O4@EG), while their composition and microstructure were investigated using grazing incidence X-ray diffraction (GIXRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), transmission electron microscopy (TEM) and dynamic light scattering (DLS). The matrix-assisted pulsed laser evaporation (MAPLE) technique was further employed to obtain PLA/Fe3O4@EG thin films. Optimal experimental conditions for laser processing were established by complementary infrared microscopy (IRM) and scanning electron microscopy (SEM) investigations. The in vitro biocompatibility with eukaryote cells was proven using mesenchymal stem cells, while the anti-biofilm efficiency of composite PLA/Fe3O4@EG coatings was assessed against Gram-negative and Gram-positive pathogens.

The fabrication of 3D microstructures is under continuous development for engineering bone substitutes. Collagen/chitosan (Col/CT) blends emerge as biomaterials that meet the mechanical and biological requirements associated with bone tissue. In this work, we optimize the osteogenic effect of 3D microstructures by their functionalization with Col/CT blends with different blending ratios. The structures were fabricated by laser direct writing via two-photons polymerization of IP-L780 photopolymer. They comprised of hexagonal and ellipsoidal units 80 &micro, m in length, 40 &micro, m in width and 14 &micro, m height, separated by 20 &micro, m pillars. Structures&rsquo, functionalization was achieved via dip coating in Col/CT blends with specific blending ratios. The osteogenic role of Col/CT functionalization of the 3D structures was confirmed by biological assays concerning the expression of alkaline phosphatase (ALP) and osteocalcin secretion as osteogenic markers and Alizarin Red (AR) as dye for mineral deposits in osteoblast-like cells seeded on the structures. The structures having ellipsoidal units showed the best results, but the trends were similar for both ellipsoidal and hexagonal units. The strongest osteogenic effect was obtained for Col/CT blending ratio of 20/80, as demonstrated by the highest ALP activity, osteocalcin secretion and AR staining intensity in the seeded cells compared to all the other samples.

In an attempt to develop drug delivery systems that bypass the blood–brain barrier (BBB) and prevent liver and intestinal degradation, it was concluded that nasal medication meets these criteria and can be used for drugs that have these drawbacks. The aim of this review is to present the influence of the properties of chitosan and its derivatives (mucoadhesion, permeability enhancement, surface tension, and zeta potential) on the development of suitable nasal drug delivery systems and on the nasal bioavailability of various active pharmaceutical ingredients. Interactions between chitosan and proteins, lipids, antigens, and other molecules lead to complexes that have their own applications or to changing characteristics of the substances involved in the bond (conformational changes, increased stability or solubility, etc.). Chitosan and its derivatives have their own actions (antibacterial, antifungal, immunostimulant, antioxidant, etc.) and can be used as such or in combination with other molecules from the same class to achieve a synergistic effect. The applicability of the properties is set out in the second part of the paper, where nasal formulations based on chitosan are described (vaccines, hydrogels, nanoparticles, nanostructured lipid carriers (NLC), powders, emulsions, etc.).

Implant- related infections are a consequence of microbial’ adhesion to an implant surface followed by biofilm development on the implanted device. Chemical and biological functionalization of medical surfaces represents topical tactic of enhancing biocompatibility, together with the prevention of bacterial contamination and biofilm inhibition. For this purpose, we focused our work on laser surface modification of medical devices. We prepared nanoparticles of Fe3O4 loaded with Nigella sativa oil by a modified co-precipitation method in aqueous solution of NH4OH by oil-in-water emulsion. For further studies, we mixed them with poly(lactic-co-glycolic acid) spheres. The functionalized nanoparticles were deposited on glass and silicone surfaces by Matrix Assisted Pulsed Laser Evaporation technique. The influence of experimental factors, such as laser fluences was studied. The obtained thin coatings were analyzed by high resolution transmission electron microscopy, scanning electron microscopy and infrared microscopy. The most suitable coatings were selected and tested against a broad spectrum of pathogens found in the most implant rejection issues, such as S. aureus, E. coli and C. albicans, at different time intervals and proved to limit microbial colonization and biofilm formation. In addition, biocompatibility studies using MG-63 cells adopting MTS assay confirmed the possible use of the obtained thin coatings to safely modify medical surfaces.

We report on the successful laser transfer of biocompatible composite coatings based on polyaniline (PANI) embedded with magnetite (PANI-Fe3O4) and Lincomycin hydrochloride (PANI-Lincomycin) or Lincomycin-functionalized magnetite (PANI-Fe3O4@Lincomycin) by matrix assisted pulsed laser evaporation (MAPLE) technique. The physico-chemical investigations revealed relevant data regarding the stoichiometric deposition, morphology and topography of the as-deposited coatings. Regarding the MAPLE coatings, the FTIR studies evidenced the vibrational bands characteristic to pristine PANI material, while the SEM investigations unveiled a preferential particulate morphology (with aggregates shape and size depending on the deposited material). Additionally, the AFM measurements indicated variations of RMS value, following the Lincomycin and magnetite incorporation. The wettability measurements displayed a hydrophilic behavior of the synthesized coatings, while the electrochemical studies emphasized an enhanced resistance against corrosion in simulated body fluid when compared with bare Ti. Cellular viability, immunofluorescence and SEM results proved that the MAPLE coatings were suitable materials for beneficial adhesion, spreading and proliferation of osteoblast-like cells (MG-63). Moreover, an increased efficiency was evidenced against Staphylococcus aureus biofilm development. The multifunctional properties of the laser processed composite coatings – confirmed by cumulative biocompatible, antimicrobial and anticorrosive behaviors – recommend them as promising solutions for biomedical applications.

This study aims to investigate whether ionizing radiation combined with doxorubicin-conjugated iron oxide nanoparticles (NP-DOX) improves the internalization and cytotoxic effects of the nano-carrier-mediated drug delivery in MG-63 human osteosarcoma cells. NP-DOX was designed and synthesized using the co-precipitation method. Highly stable and crystalline nanoparticles conjugated with DOX were internalized in MG-63 cells through macropinocytosis and located in the perinuclear area. Higher nanoparticles internalization in MG-63 cells previously exposed to 1 Gy X-rays was correlated with an early accumulation of cells in G2/M, starting at 12 h after treatment. After 48 h, the application of the combined treatment led to higher cytotoxic effects compared to the individual treatment, with a reduction in the metabolic capacity and unrepaired DNA breaks, whilst a low percent of arrested cells, contributing to the commitment of mitotic catastrophe. NP-DOX showed hemocompatibility and no systemic cytotoxicity, nor histopathological alteration of the main organs.

Gold nanoparticles of comparable size were synthetized using honey mediated green method (AuNPs@honey) and citrate mediated Turkevich method (AuNPs@citrate). Their colloidal behavior in two cell media DMEM and RPMI, both supplemented with 10% FBS, was systematically investigated with different characterization techniques in order to evidence how the composition of the media influences their stability and the development of protein/NP complex. We revealed the formation of the protein corona which individually covers the nanoparticles in RPMI media, like a dielectric spacer according to UV-Vis spectroscopy, while DMEM promotes more abundant agglomerations, clustering together the nanoparticles, according to TEM investigations. In order to evaluate the biological impact of nanoparticles, B16 melanoma and L929 mouse fibroblasts cells were used to carry out the viability assays. Generally, the L929 cells were more sensitive than B16 cells to the presence of gold nanoparticles. Measurements of cell viability, proliferation and apoptotic activities of B16 cells indicated that the effects induced by AuNPs@honey were slightly similar to those induced by AuNPs@citrate, however, the toxic response improved in the L929 fibroblast cells following the treatment with AuNPs@honey within the same concentration range from 1 μg/ml to 15 μg/ml for 48 h. Results showed that honey mediated synthesis generates nanoparticles with reduced toxicity trends depending on the cell type, concentration of nanoparticles and exposure time toward various biomedical applications.

The aim of our study was to obtain and evaluate the properties of polymeric coatings based on poly(lactic-co-glycolic) acid (PLGA) embedded with magnetite nanoparticles functionalized with commercial antimicrobial drugs. In this respect, we firstly synthesized the iron oxide particles functionalized (@) with the antibiotic Cefepime (Fe3O4@CEF). In terms of composition and microstructure, the as-obtained powdery sample was investigated by means of grazing incidence X-ray diffraction (GIXRD), thermogravimetric analysis (TGA), scanning and transmission electron microscopy (SEM and TEM, respectively). Crystalline and nanosized particles (~5 nm mean particle size) with spherical morphology, consisting in magnetite core and coated with a uniform and reduced amount of antibiotic shell, were thus obtained. In vivo biodistribution studies revealed the obtained nanoparticles have a very low affinity for innate immune-related vital organs. Composite uniform and thin coatings based on poly(lactide-co-glycolide) (PLGA) and antibiotic-functionalized magnetite nanoparticles (PLGA/Fe3O4@CEF) were subsequently obtained by using the matrix assisted pulsed laser evaporation (MAPLE) technique. Relevant compositional and structural features regarding the composite coatings were obtained by performing infrared microscopy (IRM) and SEM investigations. The efficiency of the biocompatible composite coatings against biofilm development was assessed for both Gram-negative and Gram-positive pathogens. The PLGA/Fe3O4@CEF materials proved significant and sustained anti-biofilm activity against staphylococcal and Escherichia coli colonisation.

We designed, fabricated and optimized 3D biomimetic magnetic structures that stimulate the osteogenesis in static magnetic fields. The structures were fabricated by direct laser writing via two-photon polymerization of IP-L780 photopolymer and were based on ellipsoidal, hexagonal units organized in a multilayered architecture. The magnetic activity of the structures was assured by coating with a thin layer of collagen-chitosan-hydroxyapatite-magnetic nanoparticles composite. In vitro experiments using MG-63 osteoblast-like cells for 3D structures with gradients of pore size helped us to find an optimum pore size between 20–40 µm. Starting from optimized 3D structures, we evaluated both qualitatively and quantitatively the effects of static magnetic fields of up to 250 mT on cell proliferation and differentiation, by ALP (alkaline phosphatase) production, Alizarin Red and osteocalcin secretion measurements. We demonstrated that the synergic effect of 3D structure optimization and static magnetic stimulation enhances the bone regeneration by a factor greater than 2 as compared with the same structure in the absence of a magnetic field.

A major limitation of existing 3D implantable structures for bone tissue engineering is that most of the cells rapidly attach on the outer edges of the structure, restricting the cells penetration into the inner parts and causing the formation of a necrotic core. Furthermore, these structures generally possess a random spatial arrangement and do not preserve the isotropy on the whole volume. Here, we report on the fabrication and testing of an innovative 3D hierarchical, honeycomb-like structure (HS), with reproducible and isotropic arhitecture, that allows in 'volume' migration of osteoblasts. In particular, we demonstrate the possibility to control the 3D spatial cells growth inside these complex architectures by adjusting the free spaces inside the structures. The structures were made of vertical microtubes arranged in a mulitlayered configuration, fabricated via laser direct writing by two photons polymerization of the IP-L780 photopolymer. In vitro tests performed in MG-63 osteoblast-like cells demonstrated that the cells migration inside the 3D structures is conducted by the separation space between the microtubes layers. Specifically, for layers separation between 2 and 10 μm, the cells gradually penetrated between the microtubes. Furthermore, these structures induced the strongest cells osteogenic differentiation and mineralization, with ALP activity 1.5 times stronger, amount of calcified minerals 1.3 times higher and osteocalcin secretion increased by 2.3 times compared to the other structures. On the opposite, for layers separation less than 2 μm and above 10 μm, the cells were not able to make interconnections and exhibited poor mineralization ability.

The increasing rate of antibiotic resistant bacteria associated with nosocomial infections in severely ill patients has urged the need for new antibacterial therapies. Nanostructured materials represent emerging innovative approaches to controlled delivery of different antimicrobial drugs. Delivery systems encapsulating natural compounds with antibacterial effects, such as essential oils have shown a great potential. Herein we report the development of SiO2 mesoporous nanosystems loaded with eucalyptus (EUC), orange (ORA), and cinnamon (CIN) essential oils. These systems were characterized with respect to morphology (using scanning electron microscopy, SEM, and transmission electron microscopy, TEM), porosity (by BET and TEM analysis), chemical composition (by X-ray diffraction, XRD, and Fourier transform infrared spectrometry, FTIR) and loading capacity (by thermogravimetric analysis, TGA). The anti-bacterial and anti-adherence effects were tested against clinically relevant microbial species (Staphylococcus aureus ATCC 25923; Escherichia coli ATCC 25922; and Candida albicans ATCC 10231), while the biocompatibility was evaluated by in vitro tests with L929 mouse fibroblast cells.

The access for safe drinking water is a problem concerning both developed and developing countries, as pure water sources are getting limited. Worldwide, people are getting exposed to a variety of waterborne diseases or heavy metal poisoning. For this reason, new and improved methods for water purification are needed. This chapter is mainly focused on the removal of microorganisms from contaminated water by using different filtering membranes and discusses some examples of nanofiltering membranes from the scientific literature: membranes embedded with carbon nanotubes, respectively, membranes embedded with silver nanoparticles. Their properties and evaluation is discussed.

The growth and development of the rubber industry was directly correlated with the increasing population needs, leading to the development of newly improved materials for different uses. This chapter summarizes the latest research regarding the obtaining of new rubber-based blends with improved properties for use in certain applications such as (bio)medical, packaging, military and aerospace, tires, or structural applications. We have also featured the trend of recycling, which has great implications in environmental and social impact because there are enormous resources to recover rubber and obtain new products.

The aim of our research activity was to obtain a biocompatible nanostructured composite based on naturally derived biopolymers (chitin and sodium alginate) loaded with commercial antibiotics (either Cefuroxime or Cefepime) with dual functions, namely promoting wound healing and assuring the local delivery of the loaded antibiotic. Compositional, structural, and morphological evaluations were performed by using the thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and fourier transform infrared spectroscopy (FTIR) analytical techniques. In order to quantitatively and qualitatively evaluate the biocompatibility of the obtained composites, we performed the tetrazolium-salt (MTT) and agar diffusion in vitro assays on the L929 cell line. The evaluation of antimicrobial potential was evaluated by the viable cell count assay on strains belonging to two clinically relevant bacterial species (i.e., Escherichia coli and Staphylococcus aureus).

Nanotechnology has been successfully used for the fabrication of targeted anti-cancer drug carriers. This study aimed to obtain Fe3O4 nanoparticles functionalized with Gemcitabine to improve the cytotoxic effects of the chemotherapeutic substance on cancer cells. The (un) functionalized magnetite nanoparticles were synthesized using a modified co-precipitation method. The nanoconjugate characterization was performed by XRD, SEM, SAED and HRTEM; the functionalizing of magnetite with anti-tumor substances has been highlighted through TGA. The interaction with biologic media has been studied by means of stability and agglomeration tendency (using DLS and Zeta Potential); also, the release kinetics of the drug in culture media was evaluated. Cytotoxicity of free-Gemcitabine and the obtained nanoconjugate were evaluated on human BT 474 breast ductal carcinoma, HepG2 hepatocellular carcinoma and MG 63 osteosarcoma cells by MTS. In parallel, cellular morphology of these cells were examined through fluorescence microscopy and SEM. The localization of the nanoparticles related to the cells was studied using SEM, EDX and TEM. Hemolysis assay showed no damage of erythrocytes. Additionally, an in vivo biodistribution study was made for tracking where Fe3O4@Gemcitabine traveled in the body of mice. Our results showed that the transport of the drug improves the cytotoxic effects in comparison with the one produced by free Gemcitabine for the BT474 and HepG2 cells. The in vivo biodistribution test proved nanoparticle accumulation in the vital organs, with the exception of spleen, where black-brown deposits have been found. These results indicate that our Gemcitabine-functionalized nanoparticles are a promising targeted system for applications in cancer therapy.