Search

With strikingly high speed, data retention ability and storage density, resistive RAMs have emerged as a forerunning nonvolatile memory. Here we developed a Re-RAM with ultra-high density array of monocrystalline perovskite quantum wires (QWs) as the switching matrix with a metallic silver conducting pathway. The devices demonstrated high ON/OFF ratio of ∼107 and ultra-fast switching speed of ∼100 ps which is among the fastest in literature. The devices also possess long retention time of over 2 years and record high endurance of ∼6 × 106 cycles for all perovskite Re-RAMs reported. As a concept proof, we have also successfully demonstrated a flexible Re-RAM crossbar array device with a metal-semiconductor-insulator-metal design for sneaky path mitigation, which can store information with long retention. Aggressive downscaling to ∼14 nm lateral dimension produced an ultra-small cell effectively having 76.5 nm2 area for single bit storage. Furthermore, the devices also exhibited unique optical programmability among the low resistance states.

Human eyes possess exceptional image-sensing characteristics such as an extremely wide field of view, high resolution and sensitivity with low aberration1. Biomimetic eyes with such characteristics are highly desirable, especially in robotics and visual prostheses. However, the spherical shape and the retina of the biological eye pose an enormous fabrication challenge for biomimetic devices2,3. Here we present an electrochemical eye with a hemispherical retina made of a high-density array of nanowires mimicking the photoreceptors on a human retina. The device design has a high degree of structural similarity to a human eye with the potential to achieve high imaging resolution when individual nanowires are electrically addressed. Additionally, we demonstrate the image-sensing function of our biomimetic device by reconstructing the optical patterns projected onto the device. This work may lead to biomimetic photosensing devices that could find use in a wide spectrum of technological applications. A biomimetic electrochemical eye is presented that has a hemispherical retina made from a high-density array of perovskite nanowires that are sensitive to light, mimicking the photoreceptors of a biological retina.

High-photoluminescence quantum yield (PLQY) is required to reach optimal performance in solar cells, lasers, and light-emitting diodes (LEDs). Typically, PLQY can be increased by improving the material quality to reduce the nonradiative recombination rate. It is in principle equally effective to improve the optical design by nanostructuring a material to increase light out-coupling efficiency (OCE) and introduce quantum confinement, both of which can increase the radiative recombination rate. However, increased surface recombination typically minimizes nanostructure gains in PLQY. Here a template-guided vapor phase growth of CH3NH3PbI3 (MAPbI3) nanowire (NW) arrays with unprecedented control of NW diameter from the bulk (250 nm) to the quantum confined regime (5.7 nm) is demonstrated, while simultaneously providing a low surface recombination velocity of 18 cm s-1. This enables a 56-fold increase in the internal PLQY, from 0.81% to 45.1%, and a 2.3-fold increase in OCEy to increase the external PLQY by a factor of 130, from 0.33% up to 42.6%, exclusively using nanophotonic design.

Herein, we demonstrate a unique electrochemical eye using a hemispherical retina made of high-density array of nanowires (NWs) mimicking photoreceptors on a real retina. The device design has a potency to achieve a high imaging resolution when individual NW s are electrically addressed. Meanwhile, image sensing function of our biomimetic device is also demonstrated. The work here may lead to a new generation of photosensing devices based on a bioinspired design that can benefit a wide spectrum of technological applications.

The formamidinium lead iodide (FAPbI3) perovskite has attracted immense research interest as it has much improved stability than methylammonium lead iodide (MAPbI3) while still maintaining excellent optoelectronic properties. Compared to MAPbI3, FAPbI3 has shown an elevated decomposition temperature and a slower decomposition process and therefore it is considered as a more promising candidate for future high-efficiency and reliable optoelectronic devices. However, these excellent optoelectronic properties only exist in the alpha phase and this phase will spontaneously transform into an undesired delta phase with much poorer optoelectronic properties regardless of the environment. This is the main challenge for the application of the FAPbI3 perovskite. Herein, we report a novel strategy to stabilize the cubic black phase of FAPbI3 by using nanoengineering templates. Without further treatment, the black phase can be held over 7 months under ambient conditions and 8 days in an extreme environment with a Relative Humidity (RH) of 97%. A systematic study further reveals that this great improvement can be attributed to the spatial confinement in anodized alumina membrane (AAM) nanochannels, which prohibits the unwanted α-to-δ phase transition by restricting the expansion of NWs in the ab plane, and the excellent passivation against water molecule invasion. Meanwhile, we also demonstrate the potency of these NWs in practical applications by configuring them into photodetectors, which have shown reasonable response and excellent device stability.

The emergence of optically silent phonons show that strong interlayer electron–phonon coupling can arise in van der Waals heterostructures, with the vibrational modes in one layer coupling to the electronic states in a neighbouring layer. Engineering layer–layer interactions provides a powerful way to realize novel and designable quantum phenomena in van der Waals heterostructures1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16. Interlayer electron–electron interactions, for example, have enabled fascinating physics that is difficult to achieve in a single material, such as the Hofstadter’s butterfly in graphene/boron nitride (hBN) heterostructures5,6,7,8,9,10. In addition to electron–electron interactions, interlayer electron–phonon interactions allow for further control of the physical properties of van der Waals heterostructures. Here we report an interlayer electron–phonon interaction in WSe2/hBN heterostructures, where optically silent hBN phonons emerge in Raman spectra with strong intensities through resonant coupling to WSe2 electronic transitions. Excitation spectroscopy reveals the double-resonance nature of such enhancement, and identifies the two resonant states to be the A exciton transition of monolayer WSe2 and a new hybrid state present only in WSe2/hBN heterostructures. The observation of an interlayer electron–phonon interaction could open up new ways to engineer electrons and phonons for device applications.

Wearable and portable devices with desirable flexibility, operational safety, and long cruising time, are in urgent demand for applications in wireless communications, multifunctional entertainments, personal healthcare monitoring, etc. Herein, a monolithically integrated self-powered smart sensor system with printed interconnects, printed gas sensor for ethanol and acetone detection, and printable supercapacitors and embedded solar cells as energy sources, is successfully demonstrated in a wearable wristband fashion by utilizing inkjet printing as a proof-of-concept. In such a "wearable wristband", the harvested solar energy can either directly drive the sensor and power up a light-emitting diode as a warning signal, or can be stored in the supercapacitors in a standby mode, and the energy released from supercapacitors can compensate the intermittency of light illumination. To the best of our knowledge, the demonstration of such a self-powered sensor system integrated onto a single piece of flexible substrate in a printable and additive manner has not previously been reported. Particularly, the printable supercapacitors deliver an areal capacitance of 12.9 mF cm-2 and the printed SnO2 gas sensor shows remarkable detection sensitivity under room temperature. The printable strategies for device fabrication and system integration developed here show great potency for scalable and facile fabrication of a variety of wearable devices.

An effective and low-cost front-side anti-reflection (AR) technique has long been sought to enhance the performance of highly efficient photovoltaic devices due to its capability of maximizing the light absorption in photovoltaic devices. In order to achieve high throughput fabrication of nanostructured flexible and anti-reflection films, large-scale, nano-engineered wafer molds were fabricated in this work. Additionally, to gain in-depth understanding of the optical and electrical performance enhancement with AR films on polycrystalline Si solar cells, both theoretical and experimental studies were performed. Intriguingly, the nanocone structures demonstrated an efficient light trapping effect which reduced the surface reflection of a solar cell by 17.7% and therefore enhanced the overall electric output power of photovoltaic devices by 6% at normal light incidence. Notably, the output power improvement is even more significant at a larger light incident angle which is practically meaningful for daily operation of solar panels. The application of the developed AR films is not only limited to crystalline Si solar cells explored here, but also compatible with any types of photovoltaic technology for performance enhancement.