Search

International audience; The feasibility of 3-bits per cell storage in self-referenced thermally assisted magnetic random access memories is demonstrated both by macrospin simulations and experiments. The memory dot consists of a storage layer where CoFe/CoFeB magnetization direction is pinned by an IrMn layer using the ferromagnet/antiferromagnet interfacial exchange coupling, separated by an MgO tunnel barrier from a CoFeB sense layer whose magnetization direction is free to rotate. Writing is performed by heating the antiferromagnet above its blocking temperature by sending a current pulse through the magnetic tunnel junction, with the application of an in-plane field during the subsequent cooling phase, thus setting the new storage layer pinning direction. This pinning direction actually carries the information stored in the storage layer. Reading is performed by applying a rotating field, inducing a coherent rotation of the sense layer, and subsequently locating the field angle associated with the minimum measured resistance. This angle corresponds to the parallel magnetic configuration of the magnetic tunnel junction and therefore allows determining the pinning direction established during the write operation. The number of distinguishable pinning angles defines the total number of bits that can be stored in a single dot. V C 2014 AIP Publishing LLC.

Équipe 107 : Physique des plasmas chauds; International audience; The magnitude of exchange bias (H-ex) at room temperature can be significantly enhanced in IrMn/Co and (Pt(or Pd)/Co)/IrMn/Co structures thanks to the insertion of an ultrathin Cu dusting layer at the IrMn/Co interface. The combination of trilayer structure and interfacial Cu dusting leads to a three-fold increase in H-ex as compared to the conventional IrMn/Co bilayer structure, with an increased blocking temperature (T-B) and a concave curvature of the temperature dependence H-ex(T), ideal for improved Thermally Assisted-Magnetic Random Access Memory storage layer. This exchange bias enhancement is ascribed to a reduction of the spin frustration at the IrMn/Co interface thanks to interfacial Cu addition.

On paper, MRAMs combine non volatility, high speed, moderate power consumption, infinite endurance and radiation hardness, all at low cost and easy to embed. Since its inception in the late 90's, however, and despite numerous promising announcements from laboratories, large corporations and start-ups, MRAM has failed to live to its expectations. Large volume applications are still to be seen, with only Toggle switching-based standalone products currently available, at 180nm technology node. The recent advent of spin transfer torque, however, has shed a new light on MRAM with the promises of much improved performances and greater scalability to very advanced technology node. As a consequence, MRAM is now viewed again as a credible replacement to existing technologies for applications where the combination of non-volatility, speed, low power and endurance is key.

Synthetic antiferromagnets are of great interest as reference layers in magnetic tunnel junctions since they allow decreasing the dipolar coupling between the two magnetic electrodes and exhibit larger pinning fields than single reference layers. In this letter, we investigate the effect of the insertion of an ultrathin Pt layer in contact with the Ru spacer in synthetic antiferromagnets with perpendicular magnetic anisotropy. Surprisingly, for Ru thickness below 0.75 nm, the antiferromagnetic coupling amplitude through Ru first increases upon Pt insertion up to a critical Pt thickness (∼0.25 nm) above which coupling decreases. In addition, the corresponding increase of perpendicular magnetic anisotropy enhances the thermal stability of the structure.

This letter presents a study of perpendicular anisotropy in Co/Ni multilayers, which could constitute a thick polarizer in spin torque oscillators or a magnetic electrode in magnetic tunnel junctions (MTJ) with perpendicular anisotropy. Perfectly square perpendicular loops are observed for as-deposited Co/Ni multilayers with various sublayer thicknesses and bilayer repetition numbers using a Pt buffer layer. An anisotropy energy of 1.0 × 106 erg·cm−3 is obtained for 9 nm thick Co/Ni multilayers. For Co/Ni multilayers deposited on MgO, no perpendicular magnetization component is observed in the as-deposited state, but it develops (even in 2.1 nm Co/Ni multilayers) after annealing at 250 °C.

In magnetic tunnel junctions (MTJ), synthetic antiferromagnets (SAF) are usually used as reference layer to minimize dipolar interactions induced between this layer and the free layer (FL). We show here that the use of SAF allows us to reduce the asymmetry of the FL reversal due to stray fields in nanosized MTJs with perpendicular magnetic anisotropy.

International audience; rMn blocking temperature ($T_B$) is compared between IrMn/Co bilayers and (Pt/Co)$_3$/IrMn/Co and (Pd/Co)$_3$/IrMn/Co trilayers for different IrMn thicknesses. Exchange bias field ($H_{ex}$) is measured from 5 to 400 K. Trilayers show a more concave thermal decrease of $H_{ex}$($T$) compared to bilayers and, for thin IrMn layers, larger $T_B$ and sharper peak of coercive field Hc around $TB$. This $H_{ex}$($T$) behaviour presents improved characteristics for thermally assisted-MRAM (TA-MRAM) applications, with large $H_{ex}$/$H_c$ ratio. Two physical explanations are proposed: an indirect IrMn intergrain coupling through the (Pt(Pd)/Co)$_3$layer and a reduction of IrMn/Co interfacial coupling due to out-of-plane canting of the IrMn spins.

This paper is focused on thermally assisted magnetic random access memories (TA-MRAMs). It explains how the heating produced by Joule dissipation around the tunnel barrier of magnetic tunnel junctions (MTJs) can be used advantageously to assist writing in MRAMs. The main idea is to apply a heating pulse to the junction simultaneously with a magnetic field (field-induced thermally assisted (TA) switching). Since the heating current also provides a spin-transfer torque (current-induced TA switching), the magnetic field lines can be removed to increase the storage density of TA-MRAMs. Ultimately, thermally induced anisotropy reorientation (TIAR)-assisted spin-transfer torque switching can be used in MTJs with perpendicular magnetic anisotropy to obtain ultimate downsize scalability with reduced power consumption. TA writing allows extending the downsize scalability of MRAMs as it does in hard disk drive technology, but it also allows introducing new functionalities particularly useful for security applications (Match-in-Place™ technology).

International audience; This paper reports sub-nanosecond precessional spin-transfer switching in elliptical magnetic tunnel junction nanopillars. This result is obtained in samples integrating a synthetic antiferromagnetic perpendicular polarizer and a tunnel junction with in-plane magnetized electrodes. The out-of-plane precession of the free layer magnetization results in oscillations of the switching probability as a function of the pulse width. At 9.25 MA/cm2 current density, these oscillations have a period of 1 ns with a high degree of coherence.