Search

The aim of this study was to evaluate the performance of zinc oxide nanoparticles as a photocatalyst for photodegradation of two model non-ionic surfactants (Triton X-100 and C12E10). The first part of the investigation was focused on the synthesis and characterization of ZnO nanoparticles, since its crystalline structure strongly impacts its photocatalytic properties. Based on the results of the XRD analysis, it was concluded that the obtained material occurred in the form of hexagonal wurtzite with a polycrystalline structure. FT-IR and XPS analyses were used to elucidate and confirm the nanomaterial structure, whereas investigation of N2 adsorption/desorption and SEM/TEM imaging allowed to establish that the synthesized ZnO was characterized as a mesoporous material with uniform, spherical shape and particle size fluctuating between 90 and 130 nm. The second part of the study included spectrophotometric assessment of the photodegradation process. The use of the obtained ZnO nanoparticles allowed to achieve efficient photodegradation of both C12E10 (92%) and Triton X-100 (82%) after 1 h of UV irradiation. The Langmuir–Hinshelwood mechanism was used to describe the reaction kinetics. Subsequent LC-MS/MS analysis of the residues indicated that the degradation mechanism is most likely based on both central fission of the surfactant molecules with further terminal oxidation of poly(ethylene glycol) and terminal oxidation leading to carboxylic derivatives of surfactants.

Studies on the identification, properties and function of chitin in sponges (Porifera), which are recognized as the first multicellular organisms on Earth, continue to be of fundamental scientific interest. The occurrence of chitin has so far been reported in 21 marine sponge species and only in two inhabiting fresh water. In this study, we present the discovery of α-chitin in the endemic demosponge Ochridaspongia rotunda, found in Lake Ohrid, which dates from the Tertiary. The presence of chitin in this species was confirmed using special staining, a chitinase test, FTIR, Raman and NEXAFS spectroscopy, and electrospray ionization mass spectrometry (ESI-MS). In contrast to the case of marine sponges, chitin in O. rotunda has been found only within its holdfast, suggesting a role of chitin in the attachment of the sponge to the hard substratum. Isolated fibrous matter strongly resemble the shape and size of the sponge holdfast with membrane-like structure.

In this study, novel MnWO4/TmVO4 ternary nano-hybrids were synthesized effectively via a simple sonochemical method. The products were characterized in detail with the use of modern analytical techniques including XRD, EDX, TEM, DRS, BET, PL, and VSM. To the authors’ best knowledge, this is the first report on the synthesis and photocatalytic performance of MnWO4/TmVO4 ternary nano-hybrids in the degradation of rhodamine B (Rh B), 2-naphthol (Na), phenol red (Ph R), and eosin Y (EY) under visible light. Based on the degradation results, MnWO4/TmVO4 is shown to have higher photodegradation ability than pure TmVO4 or MnWO4 nanoparticles. It was also found that maximum degradation (99.2%) is achieved in the case of Rh B dye.

Praca zostala zrealizowana w ramach projektow badawczych Politechniki Poznanskiej 03/32/DSPB/0806 i 03/32/DSMK/0810.

Analysis was carried out to determine the physicochemical characteristics – morphological and structural, electrokinetic properties, elemental composition and functional groups – of peat, with a view to its use as a potential adsorbent of heavy metal ions from aqueous solutions. A significant part of the study comprised tests of adsorption of nickel(II) and lead(II) ions from model solutions. It was determined how the parameters of the adsorption process (time, pH, quantity of sorbent) influence the effectiveness of removal of nickel(II) and lead(II) ions. The adsorption kinetics are also described, using a pseudo-first-order model and pseudo-second-order models of types 1–4. The results show strong correspondence to a pseudo-second-order kinetics model of type 1 ( r 2 = 0.999 for all initial concentrations). Another key part of the analysis was the use of the Langmuir and Freundlich models to determine the adsorption isotherms. The experimental data were in strong correspondence with Langmuir’s isotherm model. The sorption capacities of peat with respect to nickel(II) and lead(II) ions were 61.27 mg(Ni 2+ )/g and 82.31 mg(Pb 2+ )/g. Desorption tests confirmed the possibility of reusing peat as an effective sorbent of environmentally harmful metals. A mechanism is also proposed for the adsorption of Ni 2+ and Pb 2+ ions on adsorbent.

This work presents an Extreme Biomimetic approach for the development of a novel non-enzymatic electrochemical glucose sensor based on modification of a glassy carbon electrode (GCE) with CuO-chitosan nanocomposite. The impact of the synthesis conditions on the structure of the formed CuO-chitosan nanocomposites was analyzed in detail using a variety of analytical techniques, including scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). To investigate electrocatalytic activity towards glucose oxidation and to optimize the synthesis process, the modified electrodes (CuO-CS/GCE) were tested by amperometric and potentiometric methods The CuO-CS sensor based on CuO-CS_100 Exhibits 20% better electrocatalytic activity than a CuO sensor with CuO obtained under the same process conditions. The CuO-CS/GCE sensor for glucose oxidation displays high sensitivity (503 μA mM cm−2) with a high detection limit (LOD of 11 μM), short response time (within 6 s), and very good long-term stability and reproducibility. Electrochemical measurements confirmed that the CuO-chitosan nanocomposite obtained after 18 h of hydrothermal reaction at 100 °C was the most efficient modifier of GCE. These results clearly indicate that the novel CuO-CS/GCE sensor is very promising for future application in devices used to detect glucose in biological fluids.

The giant bones of whales (Cetacea) are the largest extant biomineral-based constructs known. The fact that such mammalian bones can grow up to 7 m long raises questions about differences and similarities to other smaller bones. Size and exposure to environmental stress are good reasons to suppose that an unexplored level of hierarchical organization may be present that is not needed in smaller bones. The existence of such a macroscopic naturally grown structure with poorly described mechanisms for biomineralization is an example of the many yet unexplored phenomena in living organisms. In this article, we describe key observations in macrobiomineralization and suggest that the large scale of biomineralization taking place in selected whale bones implies they may teach us fundamental principles of the chemistry, biology, and biomaterials science governing bone formation, from atomistic to the macrolevel. They are also associated with a very lipid rich environment on those bones. This has implications for bone development and damage sensing that has not yet been fully addressed. We propose that whale bone construction poses extreme requirements for inorganic material storage, mediated by biomacromolecules. Unlike extinct large mammals, cetaceans still live deep in large terrestrial water bodies following eons of adaptation. The nanocomposites from which the bones are made, comprising biomacromolecules and apatite nanocrystals, must therefore be well adapted to create the macroporous hierarchically structured architectures of the bones, with mechanical properties that match the loads imposed in vivo. This massive skeleton directly contributes to the survival of these largest mammals in the aquatic environments of Earth, with structural refinements being the result of 60 million years of evolution. We also believe that the concepts presented in this article highlight the beneficial uses of multidisciplinary and multiscale approaches to study the structural peculiarities of both organic and inorganic phases as well as mechanisms of biomineralization in highly specialized and evolutionarily conserved hard tissues.

The marine sponges of the order Verongiida (Demospongiae: Porifera) have survived on our planet for more than 500 million years due to the presence of a unique strategy of chemical protection by biosynthesis of more than 300 derivatives of biologically active bromotyrosines as secondary metabolites. These compounds are synthesized within spherulocytes, highly specialized cells located within chitinous skeletal fibers of these sponges from where they can be extruded in the sea water and form protective space against pathogenic viruses, bacteria and other predators. This chitin is an example of unique biomaterial as source of substances with antibiotic properties. Traditionally, the attention of researchers was exclusively drawn to lipophilic bromotyrosines, the extraction methods of which were based on the use of organic solvents only. Alternatively, we have used in this work a biomimetic water-based approach, because in natural conditions, sponges actively extrude bromotyrosines that are miscible with the watery environment. This allowed us to isolate 3,5-dibromoquinolacetic acid from an aqueous extract of the dried demosponge Aplysina aerophoba and compare its antimicrobial activity with the same compound obtained by the chemical synthesis. Both synthetic and natural compounds have shown antimicrobial properties against clinical strains of Staphylococcus aureus, Enterococcus faecalis and Propionibacterium acnes. Supplementary Information The online version contains supplementary material available at 10.1007/s00339-020-04167-0.

Selected hypermineralized bones (rostrum and tympanic bullae) have yet to be characterized for diverse species of whales (Cetacea). Hypermineralization in these structures is an example of extreme biomineralization that, however, occurs at temperatures around 36 °C. In this study we present the results of analytical investigations of the specimen of tympanic bulla isolated from gray whale (Eschrichtius robustus) for the first time. Examination of the internal surface of the bone mechanically crushed under a press revealed the presence of a lipid-containing phase, which did not disappear even after complete demineralization of the bone material. Additionally, analytical investigations including CARS, ATR-FTIR, Raman and XRD confirmed the presence of carbonated bioapatite and a collagen- lipid complex as the main components of this up to 2.34 kg/cm3 dense bone. Our experimental results open the way for further research on understanding of the principles of hypermineralization in highly specialized whale bones.

Molluscan shells are an example of a mineral-based biocomposite material, and most studies to date have focused on understanding their biomineralization mechanisms. Meanwhile, large amounts of these shells are produced as waste globally by seafood which is used by other industries as a source of biogenic calcium carbonates. In this study, we propose a simple methodological approach for isolation ofConchixes, the organic scaffolds that resemble the size and shapes of mollusks shells, using gentle EDTA-based demineralization of the shells. Such mineral-free biological materials have been extracted from selected representatives of marine and fresh water bivalves, as well as from marine and terrestrial gastropods under study. Key pathways to practical applications of molluscanconchixeswith regards to pharmacy, cosmetics, feed and feed additives, biomedicine and bioinspired materials science are also discussed.

Chitin is the second most abundant biopolymer and functions as the main structural component in a variety of living organisms. In nature, chitin rarely occurs in a pure form, but rather as nanoorganized chitin-proteins, chitin-pigments, or chitin-mineral composite biomaterials. Although chitin has a long history of scientific studies, it is still extensively investigated for practical applications in medicine, biotechnology, and biomimetics. The complexity of chitin has required the development of highly sensitive analytical methods for its identification. These methods are crucial for furthering disease diagnostics as well as advancing modern chitin-related technologies. Here we provide a summary of chitin identification by spectroscopic (NEXAFS, FTIR, Raman, NMR, colorimetry), chromatographic (TLC, GC, HPLC), electrophoretic (HPCE), and diffraction methods (XRD, WAXS, SAXS, HRTEM-SAED). Biochemical and immunochemical (ELISA, immunostaining) methods are described with respect to their medical application. This review outlines the history as well as the current progress in the analytical methods for chitin identification.

In vivo biomimetic biomineralization using living organisms known as biomineralizers is currently a major research trend. Industrially cultivated terrestrial snails, such as the common garden snail Cornu aspersum, represent a simple model organism that is ideal for use in experiments on the regeneration of the calcified shell after the excavation of a corresponding shell fragment. The mollusk’s artificially damaged shell is regenerated via the formation of an organic regenerative membrane, which serves as a native template for in vivo biocalcification. In this study, for the first time, a special plexiglass device for non-lethal fixation of living snails, enabling real-time monitoring of their ability to regenerate their shells using digital microscopy, has been proposed and tested. As an alternative to natural biomineralization using the mollusk’s own sources, we propose chitin- and collagen-based templates, which have been shown to be effectively calcified by living snails. The results indicate that the type of organic template used for in vivo biomineralization has a substantial effect on the nature of the mineral phases.

Structure-based tissue engineering requires large-scale 3D cell/tissue manufacture technologies, to produce biologically active scaffolds. Special attention is currently paid to naturally pre-designed scaffolds found in skeletons of marine sponges, which represent a renewable resource of biomaterials. Here, an innovative approach to the production of mineralized scaffolds of natural origin is proposed. For the first time, a method to obtain calcium carbonate deposition ex vivo, using living mollusks hemolymph and a marine-sponge-derived template, is specifically described. For this purpose, the marine sponge Aplysin aarcheri and the terrestrial snail Cornu aspersum were selected as appropriate 3D chitinous scaffold and as hemolymph donor, respectively. The formation of calcium-based phase on the surface of chitinous matrix after its immersion into hemolymph was confirmed by Alizarin Red staining. A direct role of mollusks hemocytes is proposed in the creation of fine-tuned microenvironment necessary for calcification ex vivo. The X-ray diffraction pattern of the sample showed a high CaCO3 amorphous content. Raman spectroscopy evidenced also a crystalline component, with spectra corresponding to biogenic calcite. This study resulted in the development of a new biomimetic product based on ex vivo synthetized ACC and calcite tightly bound to the surface of 3D sponge chitin structure. © 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/). Naturalis Biodiversity Center Ministerio de Ciencia, Tecnología y Medio Ambiente, CITMA: 18-54-34007 Deutsche Forschungsgemeinschaft, DFG: HE 394/3 Russian Foundation for Basic Research, RFBR Russian Science Foundation, RSF: 18-13-00220 57397326 Ministerstwo Nauki i Szkolnictwa Wyższego, MNiSW: 03/32/SBAD/0906 PPN/BEK/2018/1/00071 Deutscher Akademischer Austauschdienst, DAAD Sächsisches Staatsministerium für Wissenschaft und Kunst, SMWK: 02010311 Funding: This work was partially supported by the DFG Project HE 394/3, SMWK Project no. 02010311 (Germany), as well as DAAD-Italy Project “Marine Sponges as Sources for Bioinspired Materials Science” (No. 57397326). The sampling conducted in Cuba (V.I.) and Curaçao (V.I. and B.H.) was funded by RFBR and CITMA, according to the research project 18-54-34007 (grant), and Temminck-Fellowships from the Naturalis Biodiversity Center, respectively. M.W is financially supported by the Polish National Agency for Academic Exchange (PPN/BEK/2018/1/00071). Tomasz Machałowski is supported by DAAD (Personal ref. no. 91734605). Yuliya Khrunyk is supported by the Russian Science Foundation (grant no. 18-13-00220). This research was partially funded by the Ministry of Science and Higher Education (Poland), as financial subsidy to PUT No. 03/32/SBAD/0906.

One of the major challenges of implantology is to design nanoscale modifications of titanium implant surfaces inducing osseointegration. The aim of this study was to investigate the behavior of rat osteoblasts cultured on anodized TiO2 nanotubes of different crystallinity (amorphous and anatase phase) up to 24 days. TiO2 nanotubes were fabricated on VT1&ndash, 0 titanium foil via a two-step anodization at 20 V using NH4F as an electrolyte. Anatase-phase samples were prepared by heat treatment at 500 &deg, C for 1 h. VT1&ndash, 0 samples with flat surfaces were used as controls. Primary rat osteoblasts were seeded over experimental surfaces for several incubation times. Scanning electron microscopy (SEM) was used to analyze tested surfaces and cell morphology. Cell adhesion and proliferation were investigated by cell counting. Osteogenic differentiation of cells was evaluated by qPCR of runt-related transcription factor 2 (RUNX2), osteopontin (OPN), integrin binding sialoprotein (IBSP), alkaline phosphatase (ALP) and osteocalcin (OCN). Cell adhesion and proliferation, cell morphology and the expression of osteogenic markers were affected by TiO2 nanotube layered substrates of amorphous and anatase crystallinity. In comparison with flat titanium, along with increased cell adhesion and cell growth a large portion of osteoblasts grown on the both nanostructured surfaces exhibited an osteocyte-like morphology as early as 48 h of culture. Moreover, the expression of all tested osteogenic markers in cells cultured on amorphous and anatase TiO2 nanotubes was upregulated at least at one of the analyzed time points. To summarize, we demonstrated that amorphous and anodized TiO2 layered substrates are highly biocompatible with rat osteoblasts and that the surface modification with about 1500 nm length nanotubes of 35 &plusmn, 4 (amorphous phase) and 41 &plusmn, 8 nm (anatase phase) in diameter is sufficient to induce their osteogenic differentiation. Such results are significant to the engineering of coating strategies for orthopedic implants aimed to establish a more efficient bone to implant contact and enhance bone repair.

This work determines the effect of the addition of various amounts of vanadium oxide on the work of a cell built from a hybrid VxOy-TiO2-rGO system in a lithium-ion cell. Moreover, a new method based on solvothermal chemistry is proposed for the creation of a new type of composite material combining reduced graphene, vanadium oxide and crystalline anatase. The satisfactory electrochemical properties of VxOy-TiO2-rGO hybrids can be attributed to the perfect matching of the morphology and structure of VxOy-TiO2 and rGO. In addition, it is also responsible for the partial transfer of electrons from rGO to VxOy-TiO2, which increases the synergistic interaction of the VxOy-TiO2-rGO hybrid to the reversible storage of lithium. In addition a full cell was created LiFePO4/VxOy-TiO2-rGO. The cell showed good cyclability while providing a capacity of 120 mAh g&minus, 1.

Three-dimensional (3D) biopolymer-based scaffolds including chitinous matrices have been widely used for tissue engineering, regenerative medicine and other modern interdisciplinary fields including extreme biomimetics. In this study, we introduce a novel, electrochemically assisted method for 3D chitin scaffolds isolation from the cultivated marine demosponge Aplysina aerophoba which consists of three main steps: (1) decellularization, (2) decalcification and (3) main deproteinization along with desilicification and depigmentation. For the first time, the obtained electrochemically isolated 3D chitinous scaffolds have been further biomineralized ex vivo using hemolymph of Cornu aspersum edible snail aimed to generate calcium carbonates-based layered biomimetic scaffolds. The analysis of prior to, during and post-electrochemical isolation samples as well as samples treated with molluscan hemolymph was conducted employing analytical techniques such as SEM, XRD, ATR–FTIR and Raman spectroscopy. Finally, the use of described method for chitin isolation combined with biomineralization ex vivo resulted in the formation of crystalline (calcite) calcium carbonate-based deposits on the surface of chitinous scaffolds, which could serve as promising biomaterials for the wide range of biomedical, environmental and biomimetic applications. © 2020, The Author(s). Politechnika PoznaÅ ska, PUT: 0911/SBAD/0380/2019 Deutsche Forschungsgemeinschaft, DFG: HE 394/3 Deutscher Akademischer Austauschdienst, DAAD Russian Science Foundation, RSF: 18-13-00220 PPN/BEK/2018/1/00071 03/32/SBAD/0906 Sächsisches Staatsministerium für Wissenschaft und Kunst, SMWK: 02010311 This work was performed with the financial support of Poznan University of Technology, Poland (Grant No. 0911/SBAD/0380/2019), as well as by the Ministry of Science and Higher Education (Poland) as financial subsidy to PUT No. 03/32/SBAD/0906. Krzysztof Nowacki was supported by the Erasmus Plus program (2019). Also, this study was partially supported by the DFG Project HE 394/3 and SMWK Project No. 02010311 (Germany). Marcin Wysokowski is financially supported by the Polish National Agency for Academic Exchange (PPN/BEK/2018/1/00071). Tomasz Machałowski is supported by DAAD (Personal Ref. No. 91734605). Yuliya Khrunyk is supported by the Russian Science Foundation (Grant No. 18-13-00220).

Modern scaffolding strategies include two key ways: to produce requested 3D constructs from corresponding precursors using technological tools, or simply use naturally already pre-fabricated scaffolds if they originate from renewable sources. Marine sponges inhabit oceans since the Precambrian. These ancient multicellular organisms possess a broad variety of evolutionary approved and ready to use skeletal structures, which seem to be well applicable as 3D scaffolds in diverse fields of modern bioinspired materials science, biomimetics and regenerative medicine. In this review, most attention is paid to biosilica-, chitin-, and spongin-based scaffolds of poriferan origin with respect to their potential use. © 2020, The Author(s). Deutsche Forschungsgemeinschaft, DFG: HE 394–3 Ministerstwo Nauki i Szkolnictwa Wyższego, MNiSW: 0912/SBAD/2006 PPN/BEK/2018/1/00071 Deutsche Forschungsgemeinschaft, DFG Sächsisches Staatsministerium für Wissenschaft und Kunst, SMWK: 02010311 This work was financially supported by German Research Foundation (DFG) grant HE 394–3, SMWK Project 02010311 (Germany) and subsidy from the Ministry of Science and Higher Education, Poland to PUT (no. 0912/SBAD/2006). M.W. is thankful for financial support from Polish National Agency for Academic Exchange (PPN/BEK/2018/1/00071).

Marine demosponges of the Verongiida order are considered a gold-mine for bioinspired materials science and marine pharmacology. The aim of this work was to simultaneously isolate selected bromotyrosines and unique chitinous structures from A. aerophoba and to propose these molecules and biomaterials for possible application as antibacterial and antitumor compounds and as ready-to-use scaffolds for cultivation of cardiomyocytes, respectively. Among the extracted bromotyrosines, the attention has been focused on aeroplysinin-1 that showed interesting unexpected growth inhibition properties for some Gram-negative clinical multi-resistant bacterial strains, such as A. baumannii and K. pneumoniae, and on aeroplysinin-1 and on isofistularin-3 for their anti-tumorigenic activity. For both compounds, the effects are cell line dependent, with significant growth inhibition activity on the neuroblastoma cell line SH-SY5Y by aeroplysinin-1 and on breast cancer cell line MCF-7 by isofistularin-3. In this study, we also compared the cultivation of human induced pluripotent stem cell-derived cardiomyocytes (iPSC-CMs) on the A. aerophoba chitinous scaffolds, in comparison to chitin structures that were pre-coated with Geltrex™, an extracellular matrix mimetic which is used to enhance iPSC-CM adhesion. The iPSC-CMs on uncoated and pure chitin structures started contracting 24 h after seeding, with comparable behaviour observed on Geltrex-coated cell culture plates, confirming the biocompatibility of the sponge biomaterial with this cell type. The advantage of A. aerophoba is that this source organism does not need to be collected in large quantities to supply the necessary amount for further pre-clinical studies before chemical synthesis of the active compounds will be available. A preliminary analysis of marine sponge bioeconomy as a perspective direction for application of biomaterials and secondary bioactive metabolites has been finally performed for the first time.

The development of novel and effective methods for the isolation of chitin, which remains one of the fundamental aminopolysaccharides within skeletal structures of diverse marine invertebrates, is still relevant. In contrast to numerous studies on chitin extraction from crustaceans, mollusks and sponges, there are only a few reports concerning its isolation from corals, and especially black corals (Antipatharia). In this work, we report the stepwise isolation and identification of chitin from Cirrhipathes sp. (Antipatharia, Antipathidae) for the first time. The proposed method, aiming at the extraction of the chitinous scaffold from the skeleton of black coral species, combined a well-known chemical treatment with in situ electrolysis, using a concentrated Na2SO4 aqueous solution as the electrolyte. This novel method allows the isolation of &alpha, chitin in the form of a microporous membrane-like material. Moreover, the extracted chitinous scaffold, with a well-preserved, unique pore distribution, has been extracted in an astoundingly short time (12 h) compared to the earlier reported attempts at chitin isolation from Antipatharia corals.

Biocomposites of sponge origin attract scientific attention due to their renewability as well as special properties. Dried skeletons of fresh water demosponge Spongilla lacustris represent unique kind of naturally occurring silica-chitin-based biocomposites with long history of their applications in dermatocosmetics. However, there is still a lack of knowledge on their physico-chemical properties in model systems. The aim of this work was to model drug systems based on S. lacustris powdered biocomposite, water and a hydrophobic medium, which served as an analog of an oil base. Both thermogravimetric analysis and 1H NMR spectroscopy study of structural water in rehydrated biocomposite lead to obtaining of interesting experimental data useful for preparation of biocosmetic products. © 2020, The Author(s). Deutsche Forschungsgemeinschaft, DFG: HE 394-3 PPN/BEK/2018/1/00071 Deutsche Forschungsgemeinschaft, DFG Sächsisches Staatsministerium für Wissenschaft und Kunst, SMWK: 02010311 This work was financially supported by German Research Foundation (DFG) Grant HE 394-3, SMWK Project 02010311 (Germany). M.W. is thankful for financial support from Polish National Agency for Academic Exchange (PPN/BEK/2018/1/00071) and support from Ministry of Science and Higher Education (Poland) as financial subsidy to PUT.

Diverse fields of modern technology and biomedicine can benefit from the application of ready-to-use chitin-based scaffolds. In this work we show for the first time the applicability of tubular and porous chitin from Caribena versicolor spiders as a scaffold for the development of an effective CuO/Cu(OH)2 catalyst for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AM), and as a scaffold for the tissue engineering of selected cells. The formation of CuO/Cu(OH)2 phases on and within the chitinous tubes leads to a hybrid material with excellent catalytic performance with respect to the reduction of p-nitrophenol. On the other hand, experimental results provide for the first time strong evidence for the biocompatibility of spider chitin with different cell types, a human progenitor cell line (hPheo1), as well as cardiomyocytes differentiated from induced pluripotent stem cells (iPSC-CMs) that were cultured on a tube-like scaffold.

Among marine demosponges (Porifera: Demospongiae), only representatives of the order Verongiida have been recognized to synthetize both biologically active substances as well as scaffolds-like fibrous skeletons made of structural aminopolysaccharide chitin. The unique 3D architecture of such scaffolds open perspectives for their applications in waste treatment, biomimetics and tissue engineering. Here, we focus special attention to the demosponge Pseudoceratina purpurea collected in the coastal waters of Singapore. For the first time the detailed description of the isolation of chitin from the skeleton of this sponge and its identification using diverse bioanalytical tools were carried out. Calcofluor white staining, FTIR analysis, electrospray ionization mass spectrometry (ESI-MS), SEM, and fluorescence microscopy as well as a chitinase digestion assay were applied in order to confirm with strong evidence the finding of alpha-chitin in the skeleton of P. purpurea. We suggest that the discovery of chitin within representatives of Pseudoceratinidae family is a perspective step in evaluation of these verongiid sponges as novel renewable sources for both chitin and biologically active metabolites, which are of prospective use for marine oriented biomedicine and pharmacology, respectively.

Composites containing biological materials with nanostructured architecture have become of great interest in modern materials science, yielding both interesting chemical properties and inspiration for biomimetic research. Herein, we describe the preparation of a novel 3D nanostructured MnO2-based composite developed using a carbonized proteinaceous spongin template by an extreme biomimetics approach. The thermal stability of the spongin-based scaffold facilitated the formation of both carbonized material (at 650 °C with exclusion of oxygen) and manganese oxide with a defined nanoscale structure under 150 °C. Remarkably, the unique network of spongin fibers was maintained after pyrolysis and hydrothermal processing, yielding a novel porous support. The MnO2-spongin composite shows a bimodal pore distribution, with macropores originating from the spongin network and mesopores from the nanostructured oxidic coating. Interestingly, the composites also showed improved electrochemical properties compared to those of MnO2. Voltammetry cycling demonstrated the good stability of the material over more than 3,000 charging/discharging cycles. Additionally, electrochemical impedance spectroscopy revealed lower charge transfer resistance in the prepared materials. We demonstrate the potential of extreme biomimetics for developing a new generation of nanostructured materials with 3D centimeter-scale architecture for the storage and conversion of energy generated from renewable natural sources.

This work presents an extreme biomimetics route for the modification of the surface of fibre-based scaffolds of poriferan origin by the creation of novel nanostructured multiphase biocomposites. The exceptional thermal stability of the nanostructured sponge chitin allowed for the formation of a novel nanocrystalline chitin-(Ti,Zr)O2 composite with a well-defined nanoscale structure under hydrothermal conditions (160 °C). Using a combination of experimental techniques, including X-ray diffraction, scanning electron microscopy, high resolution transmission electron microscopy, EDX mapping and near-edge electron loss spectroscopy (ELNES) in TEM and thermogravimetry/differential scanning calorimetry coupled with mass spectrometry; we showed that this bioorganic scaffold facilitates selective crystallization of TiO2, predominantly in form of anatase, over the monoclinic zirconium dioxide (baddeleyite). The control of the crystal morphology through the chitin templates is also demonstrated. Obtained samples were characterized in terms of their photoluminescent properties and photocatalytic performance. These data confirm the high potential of the extreme biomimetics approach for developing a new generation of multiphase biopolymer-based nanostructured materials.

We report a strategy for preserving the structural features of collagen triple helix in turbostratic graphite., Fabrication of biomimetic materials and scaffolds is usually a micro- or even nanoscale process; however, most testing and all manufacturing require larger-scale synthesis of nanoscale features. Here, we propose the utilization of naturally prefabricated three-dimensional (3D) spongin scaffolds that preserve molecular detail across centimeter-scale samples. The fine-scale structure of this collagenous resource is stable at temperatures of up to 1200°C and can produce up to 4 × 10–cm–large 3D microfibrous and nanoporous turbostratic graphite. Our findings highlight the fact that this turbostratic graphite is exceptional at preserving the nanostructural features typical for triple-helix collagen. The resulting carbon sponge resembles the shape and unique microarchitecture of the original spongin scaffold. Copper electroplating of the obtained composite leads to a hybrid material with excellent catalytic performance with respect to the reduction of p-nitrophenol in both freshwater and marine environments.

A glassy carbon electrode (GCE) was modified with a nanocomposite prepared from polymerized β-cyclodextrin (β-CD) and reduced graphene oxide (rGO). The modified GCE is shown to enable the voltammetric determination of traces of levofloxacin (LEV) by various electrochemical techniques. Experimental factors affecting the results including the amount of the substrates in preparation of the nanocomposite, accumulation time, the scan rate and pH value of the electrolyte were optimized. The modified GCE, best operated at a working potential of 1.00 V (vs. Ag/AgCl), has two linear response ranges, one for low LEV concentrations (100 pmol L−1 to 100 nmol L−1), and one for higher LEV concentrations (100 nmol L−1 to 100 μmol L−1). The limit of detection and sensitivity are calculated to be 30 pmol L−1 and 467.33 nA μmol L−1 cm−2, respectively. The modified GCE demonstrates a number of advantages such as high sensitivity and selectivity, low LOD, excellent reproducibility, high surface-to-volume ratio, and good electrocatalytic activity towards LEV. The sensor was successfully applied to the determination of LEV in spiked human serum samples.

Marine sponges remain representative of a unique source of renewable biological materials. The demosponges of the family Ianthellidae possess chitin-based skeletons with high biomimetic potential. These three-dimensional (3D) constructs can potentially be used in tissue engineering and regenerative medicine. In this study, we focus our attention, for the first time, on the marine sponge Ianthella labyrinthus Bergquist &amp, Kelly-Borges, 1995 (Demospongiae: Verongida: Ianthellidae) as a novel potential source of naturally prestructured bandage-like 3D scaffolds which can be isolated simultaneously with biologically active bromotyrosines. Specifically, translucent and elastic flat chitinous scaffolds have been obtained after bromotyrosine extraction and chemical treatments of the sponge skeleton with alternate alkaline and acidic solutions. For the first time, cardiomyocytes differentiated from human induced pluripotent stem cells (iPSC-CMs) have been used to test the suitability of I. labyrinthus chitinous skeleton as ready-to-use scaffold for their cell culture. Results reveal a comparable attachment and growth on isolated chitin-skeleton, compared to scaffolds coated with extracellular matrix mimetic Geltrex&reg, Thus, the natural, unmodified I. labyrinthus cleaned sponge skeleton can be used to culture iPSC-CMs and 3D tissue engineering. In addition, I. labyrinthus chitin-based scaffolds demonstrate strong and efficient capability to absorb blood deep into the microtubes due to their excellent capillary effect. These findings are suggestive of the future development of new sponge chitin-based absorbable hemostats as alternatives to already well recognized cellulose-based fabrics.

It is shown that lignosulfonate (LS) can be used as an effective reducing agent for gold ions and simultaneously as a stabilizing agent for gold nanoparticles (AuNPs). When organically modified silica is introduced to the reaction mixture, most of the AuNPs grow on the surface of the silica due to hydrophobic interactions between LS and organic layers covering the solid particles. It was also found that the structure of the organic layer is crucial for the effective deposition of gold nanoparticles onto silica spheres in terms of particle size and gold content in the final SiO2-LS-AuNPs composites. Due to the hydrophobicity of the modified silica it was necessary to carry out the modification in mixed organic/aqueous solvent. The polarity of the organic co-solvent was found to have an effect on the size of the deposited Au-NPs and their quantity. The physical appearance of the obtained hybrids was analyzed by colorimetry, and their structure and composition were evaluated using transmission electron microscopy (TEM). Additionally dispersive and thermal properties were examined by dynamic light scattering (DLS) and thermogravimetry (TG), respectively. The obtained multifunctional hybrid materials exhibits remarkable catalytic activity for the reduction of C.I. Basic Blue 9 (Methylene Blue) by borohydride.

A new chitosan/sponge chitin – based membrane (CS/CH membrane) was prepared via the casting method for the first time. We used the demineralized skeleton of the marine demosponge Ianthella basta as a source for a chitinous network. The obtained membrane was immersed in 1 M LiOAc (lithium acetate) solution and tested in an Electric Double Layer Capacitor (EDLC) cell. For comparison, chitosan (CS) with LiOAc solution was also tested. The studies performed indicated good properties of the CS/CH membrane. Very good mechanical stability (for use in electrochemical capacitors) and electrochemical properties of the CS membrane were achieved by the addition of chitin isolated from the sponge to the polymer matrix. Their electrochemical performances were tested in EDLC cells by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge. The specific capacitances of the tested capacitor cells were found to be approximately 97 F g−1 and 88 F g−1 with CS/CH and CS membranes (in the voltage range 0–0.8 V), respectively.

The biosynthesis, structural diversity, and functionality of collagens of sponge origin are still paradigms and causes of scientific controversy. This review has the ambitious goal of providing thorough and comprehensive coverage of poriferan collagens as a multifaceted topic with intriguing hypotheses and numerous challenging open questions. The structural diversity, chemistry, and biochemistry of collagens in sponges are analyzed and discussed here. Special attention is paid to spongins, collagen IV-related proteins, fibrillar collagens from demosponges, and collagens from glass sponge skeletal structures. The review also focuses on prospects and trends in applications of sponge collagens for technology, materials science and biomedicine.

Marine demosponges (Porifera: Demospongiae) are recognized as first metazoans which have developed over millions of years of evolution effective survival strategies based on unique metabolic pathways to produce both biologically active secondary metabolites and biopolymer-based stiff skeletons with 3D architecture. Up to date, among marine demosponges, only representatives of the Verongiida order have been known to synthetize biologically active substances as well as skeletons made of structural polysaccharide chitin. This work, to our knowledge, demonstrates for the first time that chitin is an important structural component within skeletons of non-verongiid demosponges Acarnus wolffgangi and Echinoclathria gibbosa collected in the Red Sea. Calcofluor white staining, FTIR and Raman analysis, ESI-MS, SEM, and fluorescence microscopy as well as a chitinase digestion assay were applied in order to confirm, with strong evidence, the finding of α-chitin in the skeleton of both species. We suggest that, the finding of chitin within these representatives of Poecilosclerida order is a promising step in the evaluation of these sponges as novel renewable sources for both biologically active metabolites and chitin, which are of prospective application for pharmacology and biomedicine.

A chitin/lignin material with defined physicochemical and morphological properties was used as an effective adsorbent of environmentally toxic metals from model systems. Particularly significant is its use in the neutralization of real industrial wastes. The ions Ni 2+ , Cu 2+ , Zn 2+ and Pb 2+ were adsorbed on the functional sorbent, confirming the high sorption capacity of the newly obtained product, primarily due to the presence on its surface of numerous active functional groups from the component biopolymers. The kinetics of the process of ion adsorption from model solution were investigated, and the experimental data were found to fit significantly better to a type 1 pseudo-second-order kinetic model, as confirmed by the high correlation coefficient of 0.999 for adsorption of both nickel(II) copper(II) zinc(II) and lead(II) ions. The experimental data obtained on the basis of adsorption isotherms corresponded to the Langmuir model. The sorption capacity of the chitin/lignin material was measured at 70.41 mg(Ni 2+ )/g, 75.70 mg(Cu 2+ )/g, 82.41 mg(Zn 2+ )/g and 91.74 mg(Pb 2+ )/g. Analysis of thermodynamic parameters confirmed the endothermic nature of the process. It was also shown that nitric acid is a very effective desorbing (regenerating) agent, enabling the chitin/lignin material to be reused as an effective sorbent of metal ions. The sorption abilities of the chitin/lignin system with respect to particular metal ions can be ordered in the sequence Ni 2+ 2+ 2+ 2+ . Tests were also performed with the adsorption of ions of nickel(II), copper(II), zinc(II) and lead(II) from wastewater obtained from galvanization and battery production plants, confirming the ability of the chitin/lignin sorbent to adsorb harmful ions from real industrial wastes.

The aim of extreme biomimetics is to design a bridge between extreme biomineralization and bioinspired materials chemistry, where the basic principle is to exploit chemically and thermally stable, renewable biopolymers for the development of the next generation of biologically inspired advanced and functional composite materials. This study reports for the first time the use of proteinaceous spongin-based scaffolds isolated from marine demosponge Hippospongia communis as a three-dimensional (3D) template for the hydrothermal deposition of crystalline titanium dioxide. Scanning electron microscopy (SEM) assisted with energy dispersive X-ray spectroscopy (EDS) mapping, low temperature nitrogen sorption, thermogravimetric (TG) analysis, X-ray diffraction spectroscopy (XRD), and attenuated total reflectance⁻Fourier transform infrared (ATR⁻FTIR) spectroscopy are used as characterization techniques. It was found that, after hydrothermal treatment crystalline titania in anatase form is obtained, which forms a coating around spongin microfibers through interaction with negatively charged functional groups of the structural protein as well as via hydrogen bonding. The material was tested as a potential heterogeneous photocatalyst for removal of C.I. Basic Blue 9 dye under UV irradiation. The obtained 3D composite material shows a high efficiency of dye removal through both adsorption and photocatalysis.

Chitin occurs in a variety of invertebrates, especially in arthropod cuticles, but is rarely reported in the fossil record. Although it has been detected in fossils as old as Middle Cambrian and Silurian, the majority of records come from much younger, Cenozoic deposits. In this paper, we report the preservation of chitin in Early Jurassic neritimorph gastropod egg capsules deposited in bivalve shells from prodelta-deltafront and nearshore paleoenvironments of the Holy Cross Mountains, Poland. We used a number of analytical methods to confirm the presence of chitin preserved in these ancient fossils. This is the first record of chitin preservation in Mesozoic deposits that, interestingly, do not follow the conventional Konservat-Lagerstätten manner of preserving soft-bodied and non-biomineralized organisms. We believe that deltaic settings characterized by episodic, high input of fluvial deposits, oligohaline conditions, and oxygen-poor microenvironment within the sediment—as well as early cementation of sediment infilling the shells—were crucial for chitin preservation. The preservation of chitin in such recalcitrant structures as egg capsules and deposits that formed outside conventional Konservat-Lagerstätten conditions renders it likely similar deposits may yield promise for discoveries of similar biological macromolecules.

WOS: 000412959500037, PubMed: 28185932, Since the discovery of chitin in skeletal structures of sponges (Porifera) in 2007, studies on search of novel species which possess this structural aminopolysaccharide continue up today. The most potential source of chitin is suggested to be localized in the four families of sponges related to the order Verongida (Demospongiae) which nevertheless require further clarification. Here, we report for the first time the isolation and identification of alpha-chitin from the Suberea clavata demosponge (Aplysinidae: Verongida). Raman spectroscopy, Calcofluor White staining, chitinase test and ESI-MS techniques were used to identify chitin. We suggest that the presence of chitin within fibrous skeletons of diverse species of Verongida order, and, especially in all species of the Aplysinidae family, may be useful for the identification of novel, previously unidentified marine demosponges. (C) 2017 Elsevier B.V. All rights reserved., DFG (Germany) [EH 394-3]; PUT research grant (Poland) [03/32/DSPB/0706/2017], This work was supported by DFG Grant EH 394-3 (Germany) and PUT research grant 03/32/DSPB/0706/2017 (Poland). The authors thank Prof. Dr. Yixin Zhang for the use of the ESI-MS instrument and Rob van Soest for his support and comments.

Chitinous scaffolds isolated from marine demosponge Ianthella basta represent novel templates for deposition of metals such as copper and copper oxides. In contrast to traditional Extreme Biomimetics methods which are based on high temperature reactions, here, we propose an alternative way based on a well-known process – electrochemical deposition or plating. This method allows production of 3D composite materials with metallic and metal oxide structures within their surfaces. For the first time chitinous scaffolds of poriferan origin, which possess a 3D network structure, were used for the copper plating. The nanocrystallites of metallic phase obtained on chitinous fibres represents replicas of the original nanofibrous substrate.

Chitin, as a fundamental polysaccharide in invertebrate skeletons, continues to be actively investigated, especially with respect to new sources and the development of effective methods for its extraction. Recent attention has been focused on marine crustaceans and sponges, however, the potential of spiders (order Araneae) as an alternative source of tubular chitin has been overlooked. In this work, we focused our attention on chitin from up to 12 cm-large Theraphosidae spiders, popularly known as tarantulas or bird-eating spiders. These organisms &ldquo, lose&rdquo, large quantities of cuticles during their molting cycle. Here, we present for the first time a highly effective method for the isolation of chitin from Caribena versicolor spider molt cuticle, as well as its identification and characterization using modern analytical methods. We suggest that the tube-like molt cuticle of this spider can serve as a naturally prefabricated and renewable source of tubular chitin with high potential for application in technology and biomedicine.

The bioactive bromotyrosine-derived alkaloids and unique morphologically-defined fibrous skeleton of chitin origin have been found recently in marine demosponges of the order Verongiida. The sophisticated three-dimensional (3D) structure of skeletal chitinous scaffolds supported their use in biomedicine, tissue engineering as well as in diverse modern technologies. The goal of this study was the screening of new species of the order Verongiida to find another renewable source of naturally prefabricated 3D chitinous scaffolds. Special attention was paid to demosponge species, which could be farmed on large scale using marine aquaculture methods. In this study, the demosponge Pseudoceratina arabica collected in the coastal waters of the Egyptian Red Sea was examined as a potential source of chitin for the first time. Various bioanalytical tools including scanning electron microscopy (SEM), fluorescence microscopy, FTIR analysis, Calcofluor white staining, electrospray ionization mass spectrometry (ESI-MS), as well as a chitinase digestion assay were successfully used to confirm the discovery of &alpha, chitin within the skeleton of P. arabica. The current finding should make an important contribution to the field of application of this verongiid sponge as a novel renewable source of biologically-active metabolites and chitin, which are important for development of the blue biotechnology especially in marine oriented biomedicine.

International audience; Diatoms are considered unicellular eukaryotic organisms exclusively depositing biogenic silica. Heretofore there has been no report of calcification by these algae. Here it is shown that calcium carbonate within the stalks of Didymosphenia geminata, a nuisance species that has prolifically colonized streams and rivers globally, is biogenic in origin and occurs as a network of calcite nanofibers. The nanofibrous framework in the mineralized polysaccharide matrix imparts mechanical support to the stalks, providing stability in variable flow conditions. The results demonstrate that D. geminata possesses cellular and periplasmic carbonic‐anhydrases that contribute to carbon fixation and biomineralization, respectively. The activity of external carbonic‐anhydrase was more than 50% of the total activity, which points to its role in anchoring this bioeroding diatom on hard surfaces. The first evidence of multiphase biomineralization by diatoms that deposit both biogenic silica and crystalline biogenic calcite which are imparting distinct functional advantage to the organism is provided.

A new method is proposed for the production of a novel chitin-polyhedral oligomeric silsesquioxanes (POSS) enzyme support. Analysis by such techniques as X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the effective functionalization of the chitin surface. The resulting hybrid carriers were used in the process of immobilization of the lipase type b from Candida antarctica (CALB). Fourier transform infrared spectroscopy (FTIR) confirmed the effective immobilization of the enzyme. The tests of the catalytic activity showed that the resulting support-biocatalyst systems remain hydrolytically active (retention of the hydrolytic activity up to 87% for the chitin + Methacryl POSS® cage mixture (MPOSS) + CALB after 24 h of the immobilization), as well as represents good thermal and operational stability, and retain over 80% of its activity in a wide range of temperatures (30–60 °C) and pH (6–9). Chitin-POSS-lipase systems were used in the transesterification processes of rapeseed oil at various reaction conditions. Produced systems allowed the total conversion of the oil to fatty acid methyl esters (FAME) and glycerol after 24 h of the process at pH 10 and a temperature 40 °C, while the Methacryl POSS® cage mixture (MPOSS) was used as a chitin-modifying agent.