Search

Extensive grape pomace from red-winemaking may seriously pollute the environment and cause the waste of resources. Cellulose after fermentation in grape pomace is suitable as the source of extract outstanding cellulose nanocrystals (CNCs). Herein, CNCs were successfully extracted from grape pomace with an eco-friendly and facile deep eutectic solvent (DES). The green DES with the composition of lactic acid/choline chloride (the molar ratio was 2:1), were used to fabricate CNCs. Importantly, the obtained CNCs as a robust nanocomposite can be successfully utilized to prepare the self-healing nanocomposite hydrogels. After added of Fe(III) and borax, the excellent self-healing performance of the guar gum-based hydrogels were achieved by the reversible noncovalent bonding interaction. Specifically, the hydrogels showed good mechanical properties (the stress was about 0.95 MPa, the strain was about 170%) and self-healing ability (the self-healing efficiency was about 90.0%). These biologically self-healing nanocomposite hydrogels can greatly broaden the recycling and utilization of grape pomace.

Recently years, hydrogels have received increased attention due to their promising applications in wound dressing, tissue engineering, biosensors and human-machine interfaces. However, designing hydrogels with good mechanical strength and self-healing ability remains a challenge. As a novel strategy, functional Janus nanosheets (JNs) were used as reinforcement to develop self-healing nanocomposite hydrogels. Herein, the silica Janus hollow spheres were prepared by a sol-gel process, modified with poly(2-(acryloyloxy)ethyl ferrocenecarboxylate)(PMAEFc)/polydopamine(PDA) to the internal/external surfaces and then crushed to fabricate the SiO2@PMAEFc/PDA JNs. The SiO2@PMAEFc/PDA JNs were then used as robust reinforcement to design self-healing nanocomposite hydrogels. Based on multiple effects of metal–coordination and host–guest interactions, the mechanical strengths and self-healing properties of hydrogels were both enhanced. Specially, after introducing JNs, the rupture stress of hydrogels increased from 1.27 MPa to 2.23 MPa, and the self-healing efficiency improved from 66.7% to 92.4%. These results demonstrate that JNs can be used as robust reinforcement to fabricate self-healing nanocomposite hydrogels, which enriches the design of self-healing hydrogels and broadens the application prospects of Janus nanomaterials.

The hot working behavior of Mg-Gd-Y-Nb-Zr alloy was investigated using constitutive model and hot processing maps in this work. Isothermal compression tests were conducted with temperature and strain rate range of 703–773 K and 0.01–5 s −1 , respectively. Improved Arrhenius-type equation incorporated with strain compensations was used to predict flow behavior of the alloy, and the predictability was evaluated using correlation coefficient, root mean square error and absolute relative error. Processing maps were constructed at different strains for Mg-Gd-Y-Nb-Zr alloy based on dynamic materials model. The processing maps are divided into three domains and the corresponding microstructure evolutions are referred to the forming of straight grain boundaries, twinning, dynamic recrystallization and grain growth. Instability occurred mainly at the strain rate range of 0.3s −1 –0.5s −1 . The optimum processing domain is mainly at the temperature range of 703–765 K with the strain rate range of 0.01–0.1 s −1 .

This work aims to clarify the influence of texture type and intensity on the shape memory effect (SME) in NiTiNb shape memory alloy (SMA) pipe joints, especially revealing the causes for the anisotropy of SME via texture changes. Three NiTiNb rods with different intensities of the {111} texture were fabricated, and their microstructures, crystalline orientation distribution functions and inverse pole figures were obtained by X-ray diffraction and electron backscatter diffraction measurements. Simultaneously, the SME was characterized by inner-diameter recoverability of the corresponding pipe joints. For a given intensity of the {111} texture, the SME of the NiTiNb pipe joints strongly depended on the expansion direction due to {111} orientation-induced anisotropy of SME. In addition, both the SME and anisotropy of NiTiNb pipe joints increased with the increased intensity of the {111} texture. Therefore, a suitable expansion direction and strong texture intensity should be considered for high SME in NiTiNb pipe joints.