Search

A digital twin-based optimization procedure is presented for an ultraprecision motion system with a flexible shaft connecting the motor to the (elastic) load, which is subject to both backlash and friction. The main contributions of the study are the design of the digital twin and its implementation, assuming a two-mass drive system. The procedure includes the virtual representation of mechanical and electrical components, non-linearities (backlash and friction), and the corresponding control system. A procedure for digital twin-based optimization is also presented, in which the maximum absolute position error is minimized while maintaining accuracy with no significant increase in the control effort. The optimal settings for the controller parameters and for the backlash peak amplitude, the backlash peak time, and the hysteresis amplitude are then determined, in order to guarantee an appropriate dynamic response in the presence of backlash and friction. The surface quality of certain manufactured components, such as hip and knee implants, depends on the smoothness and the accuracy of the real trajectory produced in the cutting process that is strongly influenced by the maximum position error. The simulations and experimental studies are presented using a real platform and two references for trajectory control, and a comparison of four digital twin-based optimization methods. The simulation study and the real-time experiments demonstrate the suitability of the digital twin-based optimization procedure and lay the foundations for the implementation of the proposed method at an industrial level., This work has been completed within the framework of projects DPI2017-86915-C3-1-R “Cognitive inspiration navigation for autonomous driving” and the European Project Grant 826417 “Power2Power: The next-generation silicon-based power solutions in mobility, industry and grid for sustainable decarbonisation in the next decade”.

Nowadays, reliability of sensors is one of the most important challenges for widespread application of Internet-of-things data in key emerging fields such as the automotive and manufacturing sectors. This paper presents a brief review of the main research and innovation actions at the European level, as well as some on-going research related to sensor reliability in cyber-physical systems (CPS). The research reported in this paper is also focused on the design of a procedure for evaluating the reliability of Internet-of-Things sensors in a cyber-physical system. The results of a case study of sensor reliability assessment in an autonomous driving scenario for the automotive sector are also shown. A co-simulation framework is designed in order to enable real-time interaction between virtual and real sensors. The case study consists of an IoT LiDAR-based collaborative map in order to assess the CPS-based co-simulation framework. Specifically, the sensor chosen is the Ibeo Lux 4-layer LiDAR sensor with IoT added capabilities. The modeling library for predicting error with machine learning methods is implemented at a local level, and a self-learning-procedure for decision-making based on Q-learning runs at a global level. The study supporting the experimental evaluation of the co-simulation framework is presented using simulated and real data. The results demonstrate the effectiveness of the proposed method for increasing sensor reliability in cyber-physical systems using Internet-of-Things data., This work was partially supported by the project Power2Power: Providing next-generation silicon-based power solutions in transport and machinery for significant decarbonisation in the next decade, funded by the Electronic Component Systems for European Leadership (ECSEL-JU) Joint Undertaking and the Ministry of Science, Innovation and Universities (MICINN), under grant agreement No 826417. In addition, this work was also funded by the Spanish Ministry of Science, Innovation and Universities through the project COGDRIVE (DPI2017-86915-C3-1-R). Preparation of this publication was also partially co-financed by the Polish National Agency for Academic Exchange (NAWA) through the project: “Industry 4.0 in Production and Aeronautical Engineering (IPAE)”.