Search

Light (Tlight), middle (Tmiddle) and severe (Tsevere) torrefaction processes by TGA in woody biomass were evaluated in relation to devolatilization rate (Drate), maximum devolatilization rate (DRmax), temperature at the level of 50% weight loss (T50), rate of weight loss at T50 (R50) and weight loss during torrefaction (Wloss-DT). The relationship between these parameters with cellulose, lignin and extractives content was established. The TGA and devolatilization curves showed that DRmax was of 4.16, 1.80 and 0.70%/min for Tlight, Tmiddle and Tsevere respectively. Wloss-DT in Tlight ranges between 3 and 6%, between 9 and 14% in Tmiddle and from 11 to 16% in Tsevere. G. arborea showed the highest Wloss-DT, with 29.10% for Tsevere and C. Lusitania and T. grandis the lowest Wloss-DT, with 15% for Tsevere. The duration of Dmax was of 5 min in Tlight and Tmiddle and 6 min in Tsevere. Cellulose, lignin and carbon presented statistically significant correlations with R50, T50, Wloss-DT and DRmax. Ash content was correlated with Wloss-DT and DRmax in all torrefaction condition. Extractives in dichloromethane was significantly in many parameters. We conclude that the torrefaction of different woody species can be optimized as biomass feedstocks with a specific temperature and time of torrefaction.

Torrefaction can increase the energy yield of biomass for better utilization in bioenergy, but chemical changes occur during the pretreatment process. Wood residues of Cupressus lusitanica, Dipteryx panamensis, Gmelina arborea, Tectona grandis, and Vochysia ferruginea were torrefied for three different time periods (8, 10, and 12 min) and three different temperatures (200, 225, and 250 °C). The mass loss, net calorific value, ash, volatiles, lignin, cellulose, extractives, and infrared spectra were evaluated. The results showed that the mass loss in torrefied biomass varied between 10% and 70%, ash content varied between 0.19 and 7.00%, and volatiles content varied between 63 and 85%. Net calorific value values varied between 17 and 23 MJ/kg, increasing with the increased torrefaction temperature. Cellulose varied between 49.85 and 67.57%. Lignin varied between 27.33 and 41.09%. The extractives varied between 3.70 and 16.86%. The change in the ratio of intensity (RI) for the bands identified using FTIR analyses showed that large changes occurred in hemicellulose components. The multivariate analysis showed that lignin, ash, extractives in hot water, volatiles, and mass loss were the variables that contributed most. The analysis of all these variables showed that torrefaction at 250 °C for 12 min presented the greatest biomass degradation. Torrefaction at 200 °C and 225 °C for 8, 10, and 12 min was optimal for thermal treatment of the biomass of these woody species.

La torrefaccion y peletizacion se han estudiado en la generacion de calor a partir de residuos lignocelulosicos, para incrementar las propiedades energeticas del material. El objetivo del presente trabajo fue torrefaccionar aserrin de Gmelina arborea y Dipteryx panamensis a 200 °C en tres tiempos: 0, 15 y 20 minutos. Con las biomasas obtenidas se fabricaron pellets de 6 mm de diametro y se evaluaron sus propiedades fisicas, el poder calorico, la densidad y la propiedad mecanica de resistencia a la compresion. Ambas especies presentaron caracteristicas fisicas similares con respecto al diametro (0.50 mm), longitud (21.50 mm) y porcentaje de absorcion de agua (6.00 %). El poder calorico aumento de 9,749 kJ·kg-1 en la biomasa sin torrefaccionar a 18,126 kJ·kg-1 en la biomasa torrefaccionada. Los pellets de D. panamesis presentaron mayor densidad y resistencia a la compresion que los de G. arborea . Con base en los resultados, la resistencia a la compresion del pellet disminuye cuando el tiempo de torrefaccion aumenta. Existe correlacion positiva entre la densidad de los pellets y la resistencia a la compresion. La especie D. panamensis presenta mejor comportamiento a la torrefaccion y peletizacion que la madera de G. arborea .

The purpose of the biomass torrefaction and pelletizing processes is to increase its energy properties, be environmentally friendly, decrease shipping costs, and make handling easier. The objective of the present work is to evaluate the density, internal density variation by X-ray densitometry, moisture content, water absorption, and compression force of torrefied biomass pellets of five wood species (Cupressus lusitanica, Dipterix panamensis, Gmelina arborea, Tectona grandis, and Vochysia ferruginea) under three torrefaction temperature conditions (light, middle, and severe) and three torrefaction times (8, 10, and 12 min). The results showed that the bulk density of the pellets was 0.90–1.30 g/cm3. The density variation of the pellets was higher with torrefaction at 250 °C. The moisture content decreased with increasing torrefaction temperature from 3% to 1%. Water absorption was lower in the pellets torrefied at 250 °C. The compression force was lower in the pellets torrefied at 250 °C with approximate loads of 700 N. Based on the above results, it was concluded that pellets made with biomass torrefied at 200 °C have better energy properties and evaluated properties. According to these results, pellets fabricated with the torrefied biomass of tropical species can be used in stove, gas, and hydrogen production because the pellet presents adequate characteristics.