Search

Electrochemical energy storage has become a key part of portable medical and electronic devices, as well as ground and aerial vehicles. Unfortunately, conventionally produced supercapacitors and batteries often cannot be easily integrated into many emerging technologies such as smart textiles, smart jewelry, paper magazines or books, and packages with data-collection or other unique capabilities, electrical cables, flexible wearable electronics and displays, flexible solar cells, epidermal sensors, and others in order to enhance their design aesthetics, convenience, system simplicity, and reliability. In addition, conventional energy storage devices that cannot conform to various shapes, are typically limited to a single function, and cannot additionally provide, for example, load bearing functionality or impact/ballistic protection to reduce the system weight or volume. Commercial devices cannot be activated by various stimuli, be able to self-destroy or biodegrade over time, trigger drug release, operate as sensors, antennas, or actuators. However, a growing number of future technologies will demand batteries and hybrid devices with the abilities to seamlessly integrate into systems and adapt to various shapes, forms, and design functions. Here we summarize recent progress and challenges made in the development of mostly nanostructured and nanoengineered materials as well as fabrication routes for energy storage devices that offer (i) multifunctionality, (ii) mechanical resiliency and flexibility and (iii) integration for more elegant, lighter, smaller and smarter designs. The geometries of device structures and materials are considered to critically define their roles in mechanics and functionality. With these understandings, we outline a future roadmap for the development, scaleup, and manufacturing of such materials and devices.

An intelligent monitoring lubricant is essential for the development of smart machines because unexpected and fatal failures of critical dynamic components in the machines happen every day, threatening the life and health of humans. Inspired by the triboelectric nanogenerators (TENGs) work on water, we present a feasible way to prepare a self-powered triboelectric sensor for real-time monitoring of lubricating oils via the contact electrification process of oil–solid contact (O–S TENG). Typical intruding contaminants in pure base oils can be successfully monitored. The O–S TENG has very good sensitivity, which even can respectively detect at least 1 mg mL–1 debris and 0.01 wt % water contaminants. Furthermore, the real-time monitoring of formulated engine lubricating oil in a real engine oil tank is achieved. Our results show that electron transfer is possible from an oil to solid surface during contact electrification. The electrical output characteristic depends on the screen effect from such as wear debris, deposited carbons, and age-induced organic molecules in oils. Previous work only qualitatively identified that the output ability of liquid can be improved by leaving less liquid adsorbed on the TENG surface, but the adsorption mass and adsorption speed of liquid and its consequences for the output performance were not studied. We quantitatively study the internal relationship between output ability and adsorbing behavior of lubricating oils by quartz crystal microbalance with dissipation (QCM-D) for liquid–solid contact interfaces. This study provides a real-time, online, self-powered strategy for intelligent diagnosis of lubricating oils.

Liquid-solid triboelectric nanogenerator (L-S TENG) is one of the major techniques to collect energy from tiny liquids, while the saturated charge density at the L-S interface is the key element to decide its performance. Here, we found that the saturated charge density of L-S contact electrification (CE) can be further increased under the illumination of an ultraviolet (UV) light. The fluorine-containing polymers and SiO2 are chosen as the electrification materials and with and without UV illumination on the L-S TENG. A series of experiments have been done to rule out the possible influences of anion generation, chemical change of solid surface, ionization of water, and so on. Therefore, we proposed that electrons belonging to water molecules can be excited to high energy states under UV illumination, which then transfer to solid surface and captured by the solid surface. Finally, a photoexcited electron transfer model is proposed to explain the enhancement of CE under the UV illumination. This work not only helps to further understand CE at L-S interface, but also offers an approach to further enhance the performance of L-S TENG, which can promote the TENG applications in the field of microfluidic systems, liquid energy harvesting, and droplet sensory.

Summary Water-wave energy, as one of the important renewable energies, is greatly difficult to efficiently harvest due to its characteristics of low frequency and randomly moving direction. Herein, we report an active resonance triboelectric nanogenerator (AR-TENG) system fabricated by using simple pendulum, tumbler, and flexible ring TENG, which can harvest omnidirectional and frequency varying water-wave energy through excellent structural design and resonance effect. Besides, thanks to the high-frequency damped motion of simple pendulum and tumbler, the high-frequency output generated by the AR-TENG system under the driving condition of low-frequency water wave can greatly improve the efficiency of wave energy harvesting. More importantly, based on the low damping coefficient, resonance effect, and elimination of water screening effect, the output performance of AR-TENG system in the water wave is closest to the simulated test. This work not only can realize the omnidirectional water-wave energy harvesting by TENG but also provide a method for large-scale blue energy harvesting.

Textile triboelectric nanogenerator (TENG) is a kind of smart textile technology that integrates traditional flexible and wearable textile materials with emerging and advanced TENG science, which not only embraces the capabilities of autonomous energy harvesting and active self-powered sensing, but also maintains original wearability and desired comfortability. With the help of the burden-free and self-sufficient wearable intelligent system, individuals can achieve convenient acquisition and efficient utilization of electric energy, which will help to promote the future development of human-oriented on-body electronics and artificial intelligence. Here, some fundamental knowledge and core elements, including the operational modes and corresponding service occasions, charge generation and transfer mechanisms, remaining challenges and potential solutions are comprehensively summarized and systematically discussed. Based on these analyses, a roadmap toward the scientific research and large-scale commercial application of textile TENGs in the next decade is highlighted at the end of the article. We believe that textile TENGs will become an indispensable part of daily clothing in the future, thus benefiting all humankind and human civilization.

Human bodily kinesthetic sensing is generally complicated and ever-changing due to the diversity of body deformation as well as the complexity of mechanical stimulus, which is different from the unidirectional mechanical motion. So, there exists a huge challenge for current flexible sensors to accurately differentiate and identify what kind of external mechanical stimulus is exerted via analyzing digital signals. Here, we report a flexible dual-interdigital-electrode sensor (FDES) that consists of two interdigital electrodes and a highly pressure-sensitive porous conductive sponge. The FDES can precisely identify multiple mechanical stimuli, e.g., pressing, positive bending, negative bending, X-direction stretching, and Y-direction stretching, and convert them into corresponding current variation signals. Moreover, the FDES exhibits other exceptional properties, such as high sensitivity, stretchability, large measurement range, and outstanding stability, accompanied by simple structural design and low-cost processing simultaneously. Additionally, our FDES successfully identifies various complex activities of the human body, which lays a foundation for the further development of multimode flexible sensors.

With the advantages of superior wear resistance, mechanical durability, and stability, the liquid-solid mode triboelectric nanogenerator (TENG) has been attracting much attention in the field of energy harvesting and self-powered sensors. However, most reports are primarily observational, and there still lacks a universal model of this kind of TENG. Here, an equivalent circuit model and corresponding governing equations of a water-solid mode TENG are developed, which could easily be extended to other types of liquid-solid mode TENGs. Based on the first-order lumped circuit theory, the full equivalent circuit model of water-solid mode TENG is modeled as a series connection of two capacitors and a water resistor. Accordingly, its output characteristics and critical influences are examined, to investigate the relevant physical mechanism behind them. Afterward, a three-dimensional water-solid TENG array constructed from many single-wire TENGs is fabricated, which can not only harvest tiny amounts of energy from any movement of water, but also can verify our theoretical predictions. The fundamentals of the water-solid mode TENG presented in this work could contribute to solving the problem of electrical phenomena on a liquid-solid interface, and may establish a sound basis for a thorough understanding of the liquid-solid mode TENG.

Distributed renewable kinetic energies are ubiquitous but with irregular amplitudes and frequencies, which, as one category of "high-entropy" energies, are crucial for next-generation self-powered electronics. Herein, we present a flexible waterproof dual-mode textile triboelectric nanogenerator (TENG), which can simultaneously scavenge multiple "high-entropy" kinetic energies, including human motions, raindrops, and winds. A freestanding-mode textile TENG (F-TENG) and a contact-separation-mode textile TENG (CS-TENG) are integrated together. The structure parameters of the textile TENG are optimized to improve the output performances. The raindrop can generate a voltage of up to ∼4.3 V and a current of about ∼6 μA, while human motion can generate a voltage of over 120 V and a peak power density of ∼500 mW m-2. The scavenged electrical energies can be stored in capacitors for powering small electronics. Therefore, we demonstrated a facile preparation of a TENG-based energy textile that is highly promising for kinetic energy harvesting and self-powered electronics.

The operation cost of an intelligent high-speed train system is greatly increased by the enormous energy demand of large-scale signal and sensor networks. However, the wind energy generated by high...

Wind energy plays an increasingly important role in alleviating the shortage of fossil fuel energy because of the emerging promising technologies such as electromagnetic generators (EMGs), triboele...

Low power electronics endowed with artificial intelligence and biological afferent characters are beneficial to neuromorphic sensory network. Highly distributed synaptic sensory neurons are more readily driven by portable, distributed, and ubiquitous power sources. Here, we report a contact-electrification-activated artificial afferent at femtojoule energy. Upon the contact-electrification effect, the induced triboelectric signals activate the ion-gel-gated MoS2 postsynaptic transistor, endowing the artificial afferent with the adaptive capacity to carry out spatiotemporal recognition/sensation on external stimuli (e.g., displacements, pressures and touch patterns). The decay time of the synaptic device is in the range of sensory memory stage. The energy dissipation of the artificial afferents is significantly reduced to 11.9 fJ per spike. Furthermore, the artificial afferents are demonstrated to be capable of recognizing the spatiotemporal information of touch patterns. This work is of great significance for the construction of next-generation neuromorphic sensory network, self-powered biomimetic electronics and intelligent interactive equipment., Low power electronics endowed with artificial intelligence and biological afferent characters are beneficial to neuromorphic sensory network. Here, the authors report contact-electrification-activated artificial afferent at femtojoule energy, which is able to carry out spatiotemporal recognition on external stimuli.

Vehicle restraint systems play an irreplaceable role to limit passenger injuries when an accident occurs, in which, the 3D acceleration sensor (AS) is an essential component to detect the collision position and force. However, there are some defects for commercial sensors such as passive sensing, low sensitivity and high manufacturing cost. Here, we report a lightweight, high-sensitivity, low-cost and self-powered 3D AS based on a liquid–metal triboelectric nanogenerator (LM-TENG). In view of the coded strategy of the electrodes, the 3D AS retains the smallest size, lowest weight and highest integration compared to the currently reported self-powered AS. The fabricated sensor possesses wide detection range from 0 to 100 m/s2 in the horizontal direction and 0 to 50 m/s2 in the vertical direction at a sensitivity of 800 mV/g. The open-circuit voltage shows a negligible decrease after continuously operating for 100,000 times, showing excellent stability and durability. Furthermore, the 3D AS is demonstrated as a part of the airbag system to spot the collision position and force of the car simultaneously. This work will further promote the commercialization of TENG-based sensor and exhibits a prospective application in the vehicle restraint system.

Equipping wearable electronics with special functions will endow them with more additional values and more comprehensive practical performance. Here, we report an ultraviolet (UV)-protective, self-cleaning, antibacterial, and self-powered all-nanofiber-based triboelectric nanogenerator (TENG) for mechanical energy harvesting and self-powered sensing, which is fabricated with Ag nanowires (NWs)/TPU nanofibers and the TiO2@PAN networks through a facile electrospinning method. Due to the added TiO2 nanoparticles (NPs), the TENG presents excellent UV-protective performance, including the ultraviolet protection factor (UPF) of ∼204, the transmittance of UVA (TUVA) of ∼0.0574%, and the transmittance of UVB (TUVB) ∼0.107%. Furthermore, under solar lighting for 25 min, most surface contamination can be degraded, and the decreased power output would be recovered. Owing to the coupled effects of TiO2 NPs and Ag NWs, the TENG shows excellent antibacterial activity against Staphylococcus aureus. Due to the micro-to-nano hierarchical porous structure, the all-nanofiber-based TENG can serve as self-powered pedometers for detecting and tracking human motion behaviors. As a multifunctional self-powered device, the TENG prompts various applications in the fields of micro/nanopower sources, human movement monitoring, and human-machine interfaces, potentially providing an alternative energy solution and a multifunctional interactive platform for the next-generation wearable electronics.

With the excellent structural design, rotary triboelectric nanogenerator (R-TENG) is suitable for harvesting mechanical energy such as wind energy and water energy to build a self-powered electrochemical system for environmental science. The electrochemical performance has been greatly improved by using the pulsed direct-current (PDC) output of a TENG; however, a full-wave PDC (FW-PDC) is hardly realized in R-TENG devices due to existence of phase superposition. Here, a R-TENG with FW-PDC output is reported to perform a self-powered electro-Fenton system for enhancing the removal efficiency of levofloxacin (OFL). By adjusting the rotation center angle ratio between each rotator and stator unit, the phase superposition of R-TENG caused by multiple parallel electrodes can be effectively eliminated, thus achieving the desired FW-PDC output. Because of the reduced electrode passivation effect, the removal efficiency of OFL is improved by 30% under equal electric charges through using the designed R-TENG with FW-PDC output compared to traditional R-TENG. This study provides a promising methodology to improve the performance of self-powered electrochemical process for treating environment pollutions.

Long-distance walking with heavy loads is often needed when going hiking or for field rescue, which is prone to cumulative fatigue. There is also a great need for labor-saving and biomechanical energy harvesting in daily life for extended security and communication needs. Here, we report a load-suspended backpack for harvesting the wasted energy of human motion based on a triboelectric nanogenerator (TENG). Two elastomers are incorporated into the backpack to decouple the synchronous movement of the load and the human body, which results in little or no extra accelerative force. With such a design, through theoretical analysis and field experiments, the backpack can realize a reduction of 28.75 % in the vertical oscillation of the load and 21.08 % in the vertical force on the wearer, respectively. Meanwhile, the mechanical-to-electric energy conversion efficiency is modeled and calculated to be 14.02 % under normal walking conditions. The designed backpack has the merits of labor-saving and shock absorption as well as electricity generation, which has the promising potential to be a power source for small-scale wearable and portable electronics, GPS systems, and other self-powered health care sensors.

Highlights A large size (> 2 cm2) nitride membrane with High-electron-mobility transistor (HEMTs) arrays was successfully separated from sapphire substrate onto flexible substrate by an electrochemical lift-off technique.Without adding extra cost, the piezotronic effect is utilized to optimize the electric transport and thermal conductivity properties of the HEMTs by modulating the physical properties of the 2DEG and phonons.This study aims to open up a new way to fabricate high-performance GaN-based HEMTs and expand practical applications in flexible electronics. Supplementary Information The online version contains supplementary material available at (10.1007/s40820-021-00589-4)., High-electron-mobility transistors (HEMTs) are a promising device in the field of radio frequency and wireless communication. However, to unlock the full potential of HEMTs, the fabrication of large-size flexible HEMTs is required. Herein, a large-sized (> 2 cm2) of AlGaN/AlN/GaN heterostructure-based HEMTs were successfully stripped from sapphire substrate to a flexible polyethylene terephthalate substrate by an electrochemical lift-off technique. The piezotronic effect was then induced to optimize the electron transport performance by modulating/tuning the physical properties of two-dimensional electron gas (2DEG) and phonons. The saturation current of the flexible HEMT is enhanced by 3.15% under the 0.547% tensile condition, and the thermal degradation of the HEMT was also obviously suppressed under compressive straining. The corresponding electrical performance changes and energy diagrams systematically illustrate the intrinsic mechanism. This work not only provides in-depth understanding of the piezotronic effect in tuning 2DEG and phonon properties in GaN HEMTs, but also demonstrates a low-cost method to optimize its electronic and thermal properties. Supplementary Information The online version contains supplementary material available at (10.1007/s40820-021-00589-4).

The development of industry and of the Internet of Things (IoTs) have brought energy issues and huge challenges to the environment. The emergence of triboelectric nanogenerators (TENGs) has attracted wide attention due to their advantages, such as self-powering, lightweight, and facile fabrication. Similarly to paper and other fiber-based materials, which are biocompatible, biodegradable, environmentally friendly, and are everywhere in daily life, paper-based TENGs (P-TENGs) have shown great potential for various energy harvesting and interactive applications. Here, a detailed summary of P-TENGs with two-dimensional patterns and three-dimensional structures is reported. P-TENGs have the potential to be used in many practical applications, including self-powered sensing devices, human–machine interaction, electrochemistry, and highly efficient energy harvesting devices. This leads to a simple yet effective way for the next generation of energy devices and paper electronics.

The selective catalytic oxidation of ammonia (SCO) to N2 seems to be the most promising technology to remove NH3. Compared with electrocatalytic and photocatalytic ammonia oxidation technology, the thermal catalytic oxidation ammonia technology was sufficient to support large-scale commercial and industrial applications. The NH3-SCO reaction was strongly obeyed the reaction routes of imide, hydrazinium-type and iSCR mechanism. Further, in situ (electron paramagnetic resonance) EPR spectroscopy combined with DFT calculation could provide a foundation for the design and construction of highly efficient ammonia oxidation catalyst. Finally, important ideas for NH3-SCO should be given the 100% N2 selectivity and higher NH3 conversion at lowest temperature. If Ag single-atoms were inserted in the tunnels of zeolites or MOF to result in single Ag atoms anchored at the tunnel, this single-atom Ag particles exhibited super NH3 conversion, N2 selectivity and hydrothermal durability at low temperatures.

In the era of industry 4.0, mechanical indicators are in great demand for providing reliable information in a harsh environment with a self-powered signal transmission ability for connecting into a centralized automatic control network of ships, trucks, and factories. In this work, based on the principle of nanogenerator, we report a block-inserting mechatronic (BIM) panel employed as not only a mechanical indicator with long operation lifetime, versatile adaptability, and improved reliability under harsh working conditions, but also an active electronic sensor for self-powered liquid information indicating and sensing. The methodology of block-inserting assembly significantly simplifies the processing costs and difficulties, which facilitates length-customization of the whole device. When equipped with the BIM panel, computer control and monitoring systems realize wireless control and real-time monitoring of liquids in miscellaneous industrial applications. This work lays the foundation of nanogenerator-based sensors applied in industrial systems, which will strongly promote the progress of industry 4.0, smart cities, and transportation.

Power dissipation is a fundamental issue for future chip-based electronics. As promising channel materials, two-dimensional semiconductors show excellent capabilities of scaling dimensions and reducing off-state currents. However, field-effect transistors based on two-dimensional materials are still confronted with the fundamental thermionic limitation of the subthreshold swing of 60 mV decade−1 at room temperature. Here, we present an atomic threshold-switching field-effect transistor constructed by integrating a metal filamentary threshold switch with a two-dimensional MoS2 channel, and obtain abrupt steepness in the turn-on characteristics and 4.5 mV decade−1 subthreshold swing (over five decades). This is achieved by using the negative differential resistance effect from the threshold switch to induce an internal voltage amplification across the MoS2 channel. Notably, in such devices, the simultaneous achievement of efficient electrostatics, very small sub-thermionic subthreshold swings, and ultralow leakage currents, would be highly desirable for next-generation energy-efficient integrated circuits and ultralow-power applications., Here, the authors demonstrate an atomic threshold-switching field-effect transistor constructed by integrating a metal filamentary switch with a two-dimensional MoS2 channel, and obtain abrupt steepness in the turn-on characteristics and 4.5 mV/dec subthreshold swing over five decades.

It has been demonstrated that substantial electric power can be produced by a liquid-based triboelectric nanogenerator (TENG). However, the mechanisms regarding the electrification between a liquid and a solid surface remain to be extensively investigated. Here, the working mechanism of a droplet-TENG was proposed based on the study of its dynamic saturation process. Moreover, the charge-transfer mechanism at the liquid-solid interface was verified as the hybrid effects of electron transfer and ion adsorption by a simple but valid method. Thus, we proposed a model for the charge distribution at the liquid-solid interface, named Wang's hybrid layer, which involves the electron transfer, the ionization reaction, and the van der Waals force. Our work not only proves that TENG is a probe for investigating charge transfer at interface of all phases, such as solid-solid and liquid-solid, but also may have great significance to water energy harvesting and may revolutionize the traditional understanding of the liquid-solid interface used in many fields such as electrochemistry, catalysis, colloidal science, and even cell biology.

Aquatic microbots have drawn great research interest due to the demands in aquatic environmental monitoring, inspection, and confined space exploration. Current actuation methods heavily rely on mechanical motion powered by large-amplitude and high-frequency sources, which limit the applications with portability and concealment requirements. Herein we propose a triboelectric nanogenerator (TENG)-enabled electrowetting-on-dielectric (EWOD) actuator (TENG-EWA) for aquatic microbots. The transferred tribo-charges of a disc TENG alternatively modify the surface energy of the EWOD actuator, yielding a capillary wave propagation. The reaction force of the capillary wave actuates the microbot on the water surface. The characteristics of the TENG induced capillary wave are analyzed experimentally and modeled theoretically. An optical transparent microbot (weight of 0.07 g, body length of 1 cm) was actuated forward at a maximum locomotion velocity of 1 cm/s. Diverse locomotion functions are demonstrated: with a load of 3 times to the robot net weight, in seawater, at a silicone-oil/deionized water interface. Besides, the locomotion of the microbot was demonstrated by a wind-driven TENG, and a good concealment performance was achieved under infrared camera and decibel meter. The proposed aquatic TENG-Bot not only shows the potential of converting environmental energy into actuation force for microbots but also reveals advantages in optical, sonic, and infrared concealment.

Recently, stretchable electronics combined with wireless technology have been crucial for realizing efficient human-machine interaction. Here, we demonstrate highly stretchable transparent wireless electronics composed of Ag nanofibers coils and functional electronic components for power transfer and information communication. Inspired by natural systems, various patterned Ag nanofibers electrodes with a net structure are fabricated via using lithography and wet etching. The device design is optimized by analyzing the quality factor and radio frequency properties of the coil, considering the effects of strain. Particularly, the wireless transmission efficiency of a five-turn coil drops by approximately only 50% at 10 MHz with the strain of 100%. Moreover, various complex functional wireless electronics are developed using near-field communication and frequency modulation technology for applications in content recognition and long-distance transmission (>1 m), respectively. In summary, the proposed device has considerable potential for applications in artificial electronic skins, human healthcare monitoring and soft robotics., Designing efficient radio frequency antenna for wireless stretchable multifunction electronics remains a challenge. Here, the authors present epidermal radio frequency antenna based on silver nanofibers network for wireless power transfer and information identification.

Piezo-phototronic effect is a fundamental effect of semiconductors lacking of central symmetry with geometries from one-dimensional (1D) nanowire to 3D bulk. Here, we present that the piezo-phototr...

Electroporation is an effective approach for drug and gene delivery, but it is still limited by its low-throughput and severe cell damage. Herein, with a self-powered triboelectric nanogenerator as the power source, we demonstrated a high-throughput electroporation system based on the design of biocompatible and flexible polypyrrole microfoam as the electrode within the flow channel. In particular, to lower the imposed voltage, one-dimensional (1D) Ag nanowires were modified on the microfoam electrode to build up a locally enhanced electric field and reduce cell damage. The self-powered electroporation system realized a successful delivery of small and large biomolecules into different cell lines with efficiency up to 86% and cell viability over 88%. The handle throughput achieved as high as 105 cells min-1 on continuously flowed cells. The high-throughput and self-powered electroporation system is expected to have potential applications in the fields of high-throughput drug and gene delivery for in vitro isolated cells.

Developing low-cost and biodegradable piezoelectric nanogenerators is of great importance for a variety of applications, from harvesting low-grade mechanical energy to wearable sensors. Many of the most widely used piezoelectric materials, including lead zirconate titanate (PZT), suffer from serious drawbacks such as complicated synthesis, poor mechanical properties (e.g., brittleness), and toxic composition, limiting their development for biomedical applications and posing environmental problems for their disposal. Here, we report a low-cost, biodegradable, biocompatible, and highly compressible piezoelectric nanogenerator based on a wood sponge obtained with a simple delignification process. Thanks to the enhanced compressibility of the wood sponge, our wood nanogenerator (15 × 15 × 14 mm3, longitudinal × radial × tangential) can generate an output voltage of up to 0.69 V, 85 times higher than that generated by native (untreated) wood, and it shows stable performance under repeated cyclic compression (≥600 cycles). Our approach suggests the importance of increased compressibility of bulk materials for improving their piezoelectric output. We demonstrate the versatility of our nanogenerator by showing its application both as a wearable movement monitoring system (made with a single wood sponge) and as a large-scale prototype with increased output (made with 30 wood sponges) able to power simple electronic devices (a LED light, a LCD screen). Moreover, we demonstrate the biodegradability of our wood sponge piezoelectric nanogenerator by studying its decomposition with cellulose-degrading fungi. Our results showcase the potential application of a wood sponge as a sustainable energy source, as a wearable device for monitoring human motions, and its contribution to environmental sustainability by electronic waste reduction.

Oxygen vacancy formation and migration in ceria is critical to its electrochemical and catalytic properties in systems for chemical and energy transformation, but its quantification is rather challenging especially at atomic-scale because of disordered distribution. Here we report a rational approach to track oxygen vacancy diffusion in single grains of pure and Sm-doped ceria at −20 °C to 160 °C using in situ (scanning) transmission electron microscopy ((S)TEM). To create a gradient in oxygen vacancy concentration, a small region (∼30 nm in diameter) inside a ceria grain is reduced to the C-type CeO1.68 phase by the ionization or radiolysis effect of a high-energy electron beam. The evolution in oxygen vacancy concentration is then mapped through lattice expansion measurement using scanning nano-beam diffraction or 4D STEM at a spatial resolution better than 2 nm; this allows direct determination of local oxygen vacancy diffusion coefficients in a very small domain inside pure and Sm-doped ceria at different temperatures. Further, the activation energies for oxygen transport are determined to be 0.59, 0.66, 1.12, and 1.27 eV for pure CeO2, Ce0.94Sm0.06O1.97, Ce0.89Sm0.11O1.945, and Ce0.8Sm0.2O1.9, respectively, implying that activation energy increases due to impurity scattering. The results are qualitatively supported by density functional theory (DFT) calculations. In addition, our in situ TEM investigation reveals that dislocations impede oxygen vacancy diffusion by absorbing oxygen vacancies from the surrounding areas and pinning them locally. With more oxygen vacancies absorbed, dislocations show extended strain fields with local tensile zone sandwiched between the compressed ones. Therefore, dislocation density should be reduced in order to minimize the resistance to oxygen vacancy diffusion at low temperatures.

Developing flexible and sustainable power sources for multifunctional and self-powered sensors is crucial for electronic skin. Herein, we report a versatile, ultraflexible, high sensitivity, fish b...

Contact electrification (CE) at interfaces is sensitive to the functional groups on the solid surface, but its mechanism is poorly understood, especially for the liquid-solid cases. A core controversy is the identity of the charge carriers (electrons or/and ions) in the CE between liquids and solids. Here, the CE between SiO2 surfaces with different functional groups and different liquids, including DI water and organic solutions, is systematically studied, and the contribution of electron transfer is distinguished from that of ion transfer according to the charge decay behavior at surfaces at specific temperature, because electron release follows the thermionic emission theory. It is revealed that electron transfer plays an important role in the CE between liquids and functional group modified SiO2. Moreover, the electron transfer between the DI water and the SiO2 is found highly related to the electron affinity of the functional groups on the SiO2 surfaces, while the electron transfer between organic solutions and the SiO2 is independent of the functional groups, due to the limited ability of organic solutions to donate or gain electrons. An energy band model for the electron transfer between liquids and solids is further proposed, in which the effects of functional groups are considered. The discoveries in this work support the "two-step" model about the formation of an electric double-layer (Wang model), in which the electron transfer occurs first when the liquids contact the solids for the very first time.

Piezo-phototronic effect has been extensively investigated for the third generation semiconductor nanowires. Here, we present a demonstration that piezo-phototronic effect can even be applied to tune polarization-sensitive photodetectors based on cation-mixed organic–inorganic perovskite nanowires. A big anisotropic photoluminescence (PL) with linearly polarized light-excitation was found due to a strong spontaneous piezoelectric polarization besides the anisotropic crystal structure and morphology. The piezo-phototronic effect was utilized to tune the PL intensity, and an improved anisotropic PL ratio from 9.36 to 10.21 for linearly polarized light-excitation was obtained thanks to the modulation by piezo-potential. And a circularly polarization-sensitive PL characterized with circular dichroism ratio was also discovered, which was found to be modulated from 0.085 to 0.555 (with a 5.5-fold improvement) within the range of applied strain. The circular dichroism was resulted from the joint effects of the modulated Rashba spin–orbit coupling and the asymmetric carriers separation and recombination for right- and left-handed helicity due to the presence of effective piezo-potential. These findings not only reveal the promising optoelectronic applications of piezo-phototronic effect in perovskite-based polarization-sensitive photodetectors, but also illuminate fundamental understandings of their polarization properties of perovskite nanowires.

Iontronics are effective in modulating electrical properties through the electric double layers (EDLs) assisted with ionic migration/arrangement, which are highly promising for unconventional electronics, ionic sensory devices, and flexible interactive interface. Proton conductors with the smallest and most abundant protons (H+) can realize a faster migration/polarization under electric field to form the EDL with higher capacitance. Here, a versatile triboiontronic MoS2 transistor via proton conductor by sophisticated combination of triboelectric modulation and protons migration has been demonstrated. This device utilizes triboelectric potential originated from mechanical displacement to modulate the electrical properties of transistors via protons migration/accumulation. It shows superior electrical properties, including high current on/off ratio over 106, low cutoff current (∼0.04 pA), and steep switching properties (89 μm/dec). Pioneering noise tests are conducted to the tribotronic devices to exclude the possible noise interference introduced by mechanical displacement. The versatile triboiontronic MoS2 transistor via proton conductor has been utilized for mechanical behavior derived logic devices and an artificial sensory neuron system. This work represents the reliable and effective triboelectric potential modulation on electronic transportation through protonic dielectrics, which is highly desired for theoretical study of tribotronic gating, active mechanosensation, self-powered electronic skin, artificial intelligence, etc.

Interface engineering by local polarization using piezoelectric1–4, pyroelectric5,6 and ferroelectric7–9 effects has attracted considerable attention as a promising approach for tunable electronics/optoelectronics, human–machine interfacing and artificial intelligence. However, this approach has mainly been applied to non-centrosymmetric semiconductors, such as wurtzite-structured ZnO and GaN, limiting its practical applications. Here we demonstrate an electronic regulation mechanism, the flexoelectronics, which is applicable to any semiconductor type, expanding flexoelectricity10–13 to conventional semiconductors such as Si, Ge and GaAs. The inner-crystal polarization potential generated by the flexoelectric field serving as a ‘gate’ can be used to modulate the metal–semiconductor interface Schottky barrier and further tune charge-carrier transport. We observe a giant flexoelectronic effect in bulk centrosymmetric semiconductors of Si, TiO2 and Nb–SrTiO3 with high strain sensitivity (>2,650), largely outperforming state-of-the-art Si-nanowire strain sensors and even piezoresistive, piezoelectric and ferroelectric nanodevices14. The effect can be used to mechanically switch the electronics in the nanoscale with fast response (

Combining traditional textiles with triboelectric nanogenerators (TENGs) gives birth to self-powered electronic textiles (e-textiles). However, there are two bottlenecks in their widespread application, low power output and poor sensing capability. Herein, by means of the three-dimensional five-directional braided (3DB) structure, a TENG-based e-textile with the features of high flexibility, shape adaptability, structural integrity, cyclic washability, and superior mechanical stability, is designed for power and sensing. Due to the spatial frame-column structure formed between the outer braided yarn and inner axial yarn, the 3DB-TENG is also endowed with high compression resilience, enhanced power output, improved pressure sensitivity, and vibrational energy harvesting ability, which can power miniature wearable electronics and respond to tiny weight variations. Furthermore, an intelligent shoe and an identity recognition carpet are demonstrated to verify its performance. This study hopes to provide a new design concept for high-performance textile-based TENGs and expand their application scope in human-machine interfacing., Low power output and poor sensing ability are bottlenecks for the practical application of fabric-based triboelectric nanogenerators (TENGs). The authors develop a shape adaptable and highly resilient 3D braided TENG, which is endowed with enhanced power output and improved pressure sensitivity.

Triboelectric nanogenerator (TENG) is an emerging powerful technology for converting ambient mechanical energy into electrical energy through the effect of triboelectricity. Starting from the expanded Maxwell’s equations, the theoretical framework of TENGs has been gradually established. Here, a review is given about its recent progress in constructing of this general theory. The fundamental mechanism of TENGs is constructed by the driving force—Maxwell’s displacement current, which is essentially different from that of electromagnetic generators. Theoretical calculations of the displacement current from a three-dimensional mathematical model are presented, as well as the theoretical studies on the TENGs according to the capacitor models. Furthermore, the figure-of-merits and standards for quantifying the TENG’s output characteristics are discussed, which will provide important guidelines for optimizing the structure and performance of TENGs toward practical applications. Finally, perspectives and challenges are proposed about the basic theory of TENGs and its future technology development.

Tactile information is efficiently captured and processed through a complex sensory system combined with mechanoreceptors, neurons, and synapses in human skin. Synapses are essential for tactile signal transmission between pre/post-neurons. However, developing an electronic device that integrates the functions of tactile information sensation and transmission remains a challenge. Here, we present a piezotronic synapse based on a single GaN microwire that can simultaneously achieve the capabilities of strain sensing and synaptic functions. The piezotronic effect in the wurtzite GaN is introduced to strengthen synaptic weight updates (e.g., 330% enhancement at a compressive stress of -0.36%) with pulse trains. A high gauge factor for strain sensing (ranging from 0 to -0.81%) of about 736 is also obtained. Remarkably, the piezotronic synapse enables the neuromorphic hardware achievement of the perception and processing of tactile information in a single micro/nanowire system, demonstrating an advance in biorealistic artificial intelligence systems.

Textile-based triboelectric nanogenerators (TENG) that can effectively harvest biomechanical energy and sense multifunctional posture and movement have a wide range of applications in next-generation wearable and portable electronic devices. Hence, bulk production of fine yarns with high triboelectric output through a continuous manufacturing process is an urgent task. Here, an ultralight single-electrode triboelectric yarn (SETY) with helical hybridized nano-micro core-shell fiber bundles is fabricated by a facile and continuous electrospinning technology. The obtained SETY device exhibits ultralightness (0.33 mg cm-1), extra softness, and smaller size (350.66 μm in diameter) compared to those fabricated by conventional fabrication techniques. Based on such a textile-based TENG, high energy-harvesting performance (40.8 V, 0.705 μA cm-2, and 9.513 nC cm-2) was achieved by applying a 2.5 Hz mechanical drive of 5 N. Importantly, the triboelectric yarns can identify textile materials according to their different electron affinity energies. In addition, the triboelectric yarns are compatible with traditional textile technology and can be woven into a high-density plain fabric for harvesting biomechanical energy and are also competent for monitoring tiny signals from humans or insects.

Based on the conjunction of contact electrification and electrostatic induction, triboelectric nanogenerators (TENGs) can harvest mechanical energy dispersed in our environment. With the characteristics of simple structure, light weight, broad material availability, low cost, and high efficiency even at low operation frequency, TENG can serve as a promising alternative strategy for meeting the needs of distributed energy for the internet of things and network. The major potential applications of TENG can be summarized as four fields containing micro/nano power sources, self-powered sensors, large-scale blue energy, and direct high-voltage power sources. In this paper, the fundamental physics, output performance enhancement, and applications of TENGs are reviewed to timely summarize the development of TENGs and provide a guideline for future research.

Contact-electrification is a universal effect for all existing materials, but it still lacks a quantitative materials database to systematically understand its scientific mechanisms. Using an established measurement method, this study quantifies the triboelectric charge densities of nearly 30 inorganic nonmetallic materials. From the matrix of their triboelectric charge densities and band structures, it is found that the triboelectric output is strongly related to the work functions of the materials. Our study verifies that contact-electrification is an electronic quantum transition effect under ambient conditions. The basic driving force for contact-electrification is that electrons seek to fill the lowest available states once two materials are forced to reach atomically close distance so that electron transitions are possible through strongly overlapping electron wave functions. We hope that the quantified series could serve as a textbook standard and a fundamental database for scientific research, practical manufacturing, and engineering., The mechanism of contact electrification remains a topic of debate. Here, the authors present a quantitative database of the triboelectric charge density and band structure of many inorganic materials, verifying that contact electrification between solids is an electron quantum transition effect.

The B-site substitution by other metals is a feasible and efficient strategy to modulate the physicochemical properties and catalytic behaviors of perovskite-type metal oxides. Herein, series of LaMn1-xNixO3 (x = 0, 0.1, 0.2 and 0.3) catalysts were prepared for catalytic combustion of propane. The maintenance of perovskite structures but the occurrence of lattice shrinkage was observed after nickel substitution. Superior redox properties (i.e. low-temperature reducibility and surface oxygen mobility), higher average oxidation states of manganese and surface oxygen abundance were identified to be the key factors for the remarkable activity improvement. LaMn0.9Ni0.1O3 presented reversible partial deactivation under water vapor or carbon monoxide-containing atmosphere due to the surface completive adsorption/oxidation phenomenon of various gaseous components. Kinetics investigation revealed the different reaction orders towards propane and oxygen over LaMn0.9Ni0.1O3 and LaMnO3, which was of strong reflection about the surface adsorption behaviors of reactants molecules.

A free-standing, binder-free, N-doped double-layered three-dimensional (3D) CNT/G cathode consisting of a structure with vertically aligned N-doped CNTs sandwiched between two N-doped graphene laye...

As one of the major air pollutants, NOX is rather challenging to remove. The main treatment method is catalytic reduction with plenty of reducing agents, which lacks any effective control in an open air environment such as urban spaces. It is necessary to seek a self-powered electrochemical process for environmental treatment. The triboelectric nanogenerator (TENG), a developing technology with various advantages, is widely used in energy and environmental monitoring and cleaning. In this work, a radial-engine-shaped TENG system with five stacked TENGs is designed to synchronously absorb NOX and degrade its main enrichment forms of nitrate and nitrite in aqueous solution. In addition, the system possesses inherent phase differences and outputs continuous direct current after rectification. Moreover, we demonstrated that, driven by artificial wind at a speed of 6 m/s, the NOX generated by a chemical method was effectively degraded by the radial-engine-shaped TENG system.

Extensive efforts have been made to harvest energy from water in the form of raindrops1–6, river and ocean waves7,8, tides9 and others10–17. However, achieving a high density of electrical power generation is challenging. Traditional hydraulic power generation mainly uses electromagnetic generators that are heavy, bulky, and become inefficient with low water supply. An alternative, the water-droplet/solid-based triboelectric nanogenerator, has so far generated peak power densities of less than one watt per square metre, owing to the limitations imposed by interfacial effects—as seen in characterizations of the charge generation and transfer that occur at solid–liquid1–4 or liquid–liquid5,18 interfaces. Here we develop a device to harvest energy from impinging water droplets by using an architecture that comprises a polytetrafluoroethylene film on an indium tin oxide substrate plus an aluminium electrode. We show that spreading of an impinged water droplet on the device bridges the originally disconnected components into a closed-loop electrical system, transforming the conventional interfacial effect into a bulk effect, and so enhancing the instantaneous power density by several orders of magnitude over equivalent devices that are limited by interfacial effects. A device involving a polytetrafluoroethylene film, an indium tin oxide substrate and an aluminium electrode allows improved electricity generation from water droplets, which bridge the previously disconnected circuit components.

Triboelectric materials and their modification methods are the cornerstones for fabricating triboelectric nanogenerators (TENGs). Numerous modification methods have been proposed for TENGs, while a highly effective and long-term stable method is still under exploration. Here, a surface modification method using low-energy ion irradiation has been proposed for tuning the chemical structures and functional groups of triboelectric polymers at the molecular level. The low-energy ion irradiation brings negligible change to the surface roughness at the micro-scale and mechanical flexibility of the target polymer, while it can provide a stable modification of the electrification performance. Systematic studies about the chemical structure changes in four different polymers induced by ion irradiation can bring insight into the interaction between different chemical groups and electrification performance. A Kapton film modified by ion irradiation shows several unprecedented characteristics, such as high surface charge density, excellent stability and ultrahigh electron-donating capability, and not only creates a new record in the tribo series, but also provides a good demonstration for regulating electrification behavior based on controllable chemical structure change. This study can open up a series of possible breakthroughs in the production of triboelectric materials with diversified properties, which can promote the study of TENGs from a very fundamental level.

Bioinspired electronics are rapidly promoting advances in artificial intelligence. Emerging AI applications, e.g., autopilot and robotics, increasingly spur the development of power devices with new forms. Here, we present a strain-controlled power device that can directly modulate the output power responses to external strain at a rapid speed, as inspired by human reflex. By using the cantilever-structured AlGaN/AlN/GaN-based high electron mobility transistor, the device can control significant output power modulation (2.30–2.72 × 103 W cm−2) with weak mechanical stimuli (0–16 mN) at a gate bias of 1 V. We further demonstrate the acceleration-feedback-controlled power application, and prove that the output power can be effectively adjusted at real-time in response to acceleration changes, i.e., ▵P of 72.78–132.89 W cm−2 at an acceleration of 1–5 G at a supply voltage of 15 V. Looking forward, the device will have great significance in a wide range of AI applications, including autopilot, robotics, and human-machine interfaces., Designing intelligent power devices that can directly control the output power modulation responses to external stimuli at a rapid speed remains a challenge. Here, the authors report a strain-controlled power device by using the cantilever-structured AlGaN/AlN/GaN HEMT to emulate human reflex process.

Contact electrification (CE) has been known for more than 2600 years but the nature of charge carriers and their transfer mechanisms still remain poorly understood, especially for the cases of liquid–solid CE. Here, we study the CE between liquids and solids and investigate the decay of CE charges on the solid surfaces after liquid–solid CE at different thermal conditions. The contribution of electron transfer is distinguished from that of ion transfer on the charged surfaces by using the theory of electron thermionic emission. Our study shows that there are both electron transfer and ion transfer in the liquid–solid CE. We reveal that solutes in the solution, pH value of the solution and the hydrophilicity of the solid affect the ratio of electron transfers to ion transfers. Further, we propose a two-step model of electron or/and ion transfer and demonstrate the formation of electric double-layer in liquid–solid CE., The identity of charge carriers (electron or ion) in contact electrification has been discussed for many years. Here, the authors demonstrate that the electron transfer paly an important role in liquid-solid contact electrification and the formation mechanism of electric double-layer is proposed.

Combining triboelectric nanogenerator (TENG) and textile materials, wearable electronic devices show great application prospects in biomotion energy harvesting and multifunctional self-power sensors in this coming intelligent era. However, fabrication method by rigidly stitching two or more individual fabrics together and working mode that must cooperate with external materials, make textile-based TENG bulky, stiff, uncomfortable and hinder their range of application. Here, by using a double needle bed flat knitting machine technology, a 3D double faced interlock fabric TENG (3DFIF-TENG) is designed as self-powered, stretchable and substrate-free wearable TENG sensors (such as a bending sensor to detect arm bending degree, pressure sensors) and energy harvesting devices. Besides, due to the unique 3D structure and after improving the structure by knitting a woven fabric-TENG in the middle layer, the 3DFIF-TENG can be further used as a multifunctional sensors, such as a 3D tactile sensor. Besides, by knitting a woven fabric-TENG in the middle layer of the 3DFIF-TENG, it can be further used as a multifunctional sensor, such as a 3D tactile sensor. The substrate-free and 3D structure design in this paper may provide a promising direction for self-powered, stretchable wearable devices in energy harvesting, human motion or robot movement detection, and smart prosthetics.

Lithium-ion capacitors (LICs) are assembled with lithium titanate nanoparticles embedded in mesoporous carbon spheres (n-LTO@MC) as anodes and activated carbon (AC) as cathodes. The resulting AC//n-LTO@MC capacitors exhibit excellent high-rate capacities of 155 and 79 mAh g−1 at current rates of 100 and 1000 C, respectively. Charging the ultrafast LICs by rotating triboelectric nanogenerator (R-TENG) with pulsed output at high frequencies is investigated and compared with LICs based on low-rate LTO nanoparticles (AC//n-LTO) and commercial LTO (AC//c-LTO). Shorter charging times by R-TENG rotating at various revolutions and larger discharging specific capacities are demonstrated for AC//n-LTO@MC than AC//n-LTO and AC//c-LTO LICs. The improved efficiency of AC//n-LTO@MC for storing energy generated by R-TENG indicates that ultrafast LICs are promising energy storage devices that may be combined with TENGs as self-charging power unit for harvesting ambient mechanical energy and powering portable electronic devices and remote sensors.

Force distribution measurements are useful for wearable electronic devices designed for monitoring human health and disease diagnosis. However, the measuring pressure of traditional pressure sensors based on conductive materials is only in the kPa range, and therefore they are not conducive to sustain pressures in the MPa range. In this study, a self-powered and flexible pressure sensor array (PSA) was developed for the detection of both magnitude and distribution of pressures around 1.1 MPa generated during mechanical movement. The cuboid-array-structured single-electrode mode triboelectric nanogenerator (C-TENG) showed output voltage signals generated by changes in deformation-induced electrostatic potential. The output voltage of a single C-TENG device varied linearly with the applied pressure. Furthermore, the sensitivity and measuring range of the PSA can be regulated by designing the cuboid-array-structure parameter and adjusting the Young's modulus of silicone rubber (SR) by incorporating dopamine modified BaTiO3 (BT). Dopamine was employed as a modifier of BT nanoparticles to improve the interfacial compatibility between the inorganic filler and SR matrix. In summary, the proposed self-powered PSA with a wide working pressure range and high flexibility looks very promising for the construction of future advanced wearable medical electronic devices.

Here we demonstrate a magnetic resonance coupling based wireless triboelectric nanogenerator (TENG) and fully self-powered wireless sensors. By integrating a microswitch and an inductor with the TENG, the pulsed voltage output is converted into a sinusoidal voltage signal with a fixed frequency. This can be transmitted wirelessly from the transmit coil to the resonant-coupled receiver coil with an efficiency of 73% for a 5 cm distance between the two coils (10 cm diameter). Analytic models of the oscillating and coupled voltage signals for the wireless energy transfer are developed, showing excellent agreement with the experimental results. A TENG of 40 × 50 mm2 can wirelessly light up 70 LEDs or charge up a 15 μF capacitor to 12.5 V in ~90 s. The system is further utilized for two types of fully self-powered wireless chipless sensors with no microelectronic components. The technologies demonstrate an innovative strategy for a wireless ‘green’ power source and sensing., Renewable energy based wireless power transfer is challenging. Here the authors show a resonant-coupled triboelectric nanogenerator as a wireless power source and have further utilized this system to explore two fully self-powered wireless chipless sensors.

Over the last few decades, tremendous efforts have been focused on developing high performance energy storage systems such as batteries and supercapacitors for the applications in portable devices. However, limited lifetime of these storage systems is still a crucial challenge, meaning inconvenient recharging or replacement is inevitable. Since 2012, a novel technology of triboelectric nanogenerator (TENG) has been proposed for converting tiny mechanical energy into electricity, and various breakthroughs have been achieved for self-powered systems. Integrating TENG with energy storage devices could be a promising way to provide sustainable power supply for long-term operations. In this review article, we present the recent advances in the TENG-based self-charging power systems (SCPSs), which will have significant applications in internet of things, portable electronics, and wearable electronics. Hybrid SCPSs combining other energy conversion technologies are also included. The key approaches for improving the total efficiency of the SCPSs are systematically summarized. Finally, some of the important challenges and future directions to be pursued are also highlighted.