Search

Three surveys on the occurrence of foxing stains were carried out on papers dating from 1560 to 1975 in three Portuguese collections. Foxed papers were found to be more intensely and intrusively stained in certain time periods of each collection. Based on historical data and the professional paper conservation expertise, the authors linked the increased occurrence of foxing stains in certain time periods to the new papermaking processes and materials, which began to be introduced in the late 18th century, and in particular to a synergistic effect between three factors: the use of deficient gelatine sizing which began to present a poorer quality and homogeneity, the presence of iron-containing impurities throughout the paper leaf and a distinct absorbency of moisture. Observing batches of morphologically similar papers by using photographic imaging with different types of light sources and incidences, the authors verified that similar papers present similar foxing stains. Received: 2019-7-20Revised: 2019-11-19Accepted: 2019-11-27Online: 2020-5-4Publication: 2020-11-27, Foram efetuados levantamentos sobre a ocorrência de manchas de foxing em papéis de 1560 a 1975 em três acervos nacionais. Observou-se, em cada um dos espólios, que certos períodos de tempo apresentavam um surgimento mais intenso e intrusivo dessas manchas. Com base em informação histórica e na experiência profissional na área da conservação de papel, os autores relacionaram este facto com novas tecnologias e materiais usados no processo de produção de papel a partir do último quartel do século XVIII e, particularmente, com a possibilidade de existência de um efeito sinergético entre a diminuição de qualidade ou falha de uniformização da encolagem de gelatina, a presença de novos procedimentos ou aditivos ricos em impurezas contendo iões ferro e uma sorbência irregular de humidade na folha. Também verificaram, através de imagens fotográficas com diferentes incidências e tipos de radiação, que grupos de papéis morfologicamente semelhantes apresentam manchas de foxing também semelhantes. Recebido: 2019-7-20Revisto: 2019-11-19Aceite: 2019-11-27Online: 2020-5-4Publicação: 2020-11-27

Polygalacturonase (PG) activity in plants can serve as an important index for plant disease. However, the conventional method to detect PG activity is a complex process and requires a skilled technician and expensive analytical equipment. In this study, a paper-based colorimetric sensor was developed based on the principle of the ruthenium red (RR) dye method for easy and simple measurement of PG activity. The proposed paper-based sensor has a three-layer structure for detection of PG activity in samples. The sensor sensitivity was enhanced by optimizing the pH of the sodium acetate buffer used in polygalacturonic acid (PGA)-RR complex formation and the reaction temperature for PG and the PGA-RR complex. Further, for quantitative analysis of PG activity, Delta RGB analysis was conducted to detect color changes in the sensing window of the sensor. Results presented that the linear measurement range of the paper sensor was 0.02-0.1 unit with the limit of detection of 0.02 unit, which showed a similar detection range, but a lower detection limit, compared to the spectrophotometry. Furthermore, PG activity based on culture condition was measured using samples from Sclerotium cepivorum to verify the potential application of the developed paper-based sensor in the field. The measured activity showed no statistically significant difference from the values obtained from the spectrophotometry at 95% confidence level. Therefore, the paper-based colorimetric sensor can be used to predict plant diseases in Allium crops during the stage of pathogen invasion, potentially contributing to the improvement of crop production.

Rapid and simultaneous in situ detection of multi-components is extremely crucial for the real-time monitoring of nutrients in fruits. Herein, a facile and user-friendly poly(carboxybetaine methacrylate)-coated paper-based microfluidic device (pCBMA-μPAD) has been exploited to synchronously identify and semi-quantify vitamin C, glucose, sucrose and fructose in fruits. The pCBMA was successfully grafted from the surface of paper sensor using a convenient and robust method, which was confirmed by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectrometry (XPS). The superior hydrophilicity and ultra-low fouling of pCBMA endowed the pCBMA-μPAD with remarkably rapid response (3 min), high sensitivity, good linear relationship and low detection limit (LOD) (vitamin C: y = 33.809 + 5.175x, R2 = 0.993, LOD = 0.179 mmol/L; glucose: y = −0.113 + 30.066lg(x), R2 = 0.988, LOD = 0.095 mmol/L; sucrose: y = −5.334 + 34.858lg(x), R2 = 0.996, LOD = 0.097 mmol/L; fructose: y = 4.996 + 23.325lg(x), R2 = 0.994, LOD = 0.140 mmol/L). Furthermore, satisfactory results were yielded in the detection of these nutrients in 9 fruits, which were much agreed well with those obtained by spectrophotometry. Such a portable and versatile pCBMA-μPAD will profoundly shape the future of food analysis, especially for the assessment of food quality and nutrition in the process of agricultural production and marketing.

In this paper, nanochitin was used as an alternative natural nanomaterial to combine with cellulose fibers for fabricating high-strength paper. Two typical chitin nanowhiskers having contrasting sign of surface charge were compared to evaluate the enhancement performance on paper in details. The results show that nanochitin with positive charges on the surface has a significant effect on the strength properties of the prepared paper, especially on wet strength. When the dosage of chitin nanowhiskers was 2%, the wet strength index was increased to 2.48 N·m/g, which is important for paper-based analytical devices with the common use in liquid analysis. Typical colorimetric glucose assays were successfully performed, suggesting the improved analytical performance on these prepared paper.

Chitosan is a biopolymer that has shown promising results for surface treatment of paper to enhance barrier and mechanical properties. Commercially, chitosan is available with a wide range of degree of deacetylation (DD). Herein, effect of DD on performance of chitosan in surface application of paper is investigated. Surface application of chitosan of different DD (77%, 84% and 94%) was done at a dose of 1.0 ± 0.2 g/m2 on kraft paper and comparison in terms of strength, structural, surface and barrier properties of paper was performed. Different DD of chitosan was confirmed by FTIR analysis. Results showed that breaking length of paper maximally increased by 15.2%/26.6% in machine direction (MD)/cross direction (CD), respectively after surface application of 94% DD chitosan followed by 77% DD and 84% DD. The maximum increase in burst index, stretch in MD and TEA in both directions of paper was found after surface application of 94% DD chitosan. Results attained by 77% DD and 84% DD chitosan for improvement in burst index, stretch and tensile energy absorption of paper were also encouraging. Maximum increase in stiffness was observed in CD with application of 84% DD chitosan. Double fold of paper also increased the maximum after surface application of 84% DD chitosan. The best results of contact angle, surface energy, Cobb60 and water vapor transmission rate were attained after surface application with 94% DD chitosan whereas the results attained by 77% DD and 84% DD chitosan for contact angle, surface energy, Cobb60 were also encouraging.

Lithium carbonate is an effective medicine for the treatment of the bipolar disorder, but the concentration of lithium in the patient's blood must be frequently monitored because of its toxicity. To date, no colorimetric methods of lithium ion detection in whole blood without pretreatment have been reported. Here, we report a colorimetric paper-based device that allows point-of-care testing in one step. This device is composed of two paper-based elements linked to each other: a blood cell separation unit and a colorimetric detection unit. After a portion of whole blood has been placed on the end of the separation unit, plasma in the sample is automatically transported to the detection unit, which displays a diagnostic color. The key feature of this device is its simple, user-friendly operation. The limit of detection is 0.054 mM and the coefficient of variance is below 6.1%, which are comparable to those of conventional instruments using the same colorimetric reaction. Furthermore, we achieved high recovery (>90%) and reproducibility (

Coated paper substrates are used for a wide range of applications. The biggest challenge that remains unsolved with regard to coated paper is its recyclability. Herein, we report a unique approach ...

Microfluidic paper-based analytical devices (μPADs) allow user-friendly and portable chemical determinations, although they provide limited applicability due to insufficient sensitivity. Several approaches have been proposed to address poor sensitivity in μPADs, but they frequently require bulky equipment for power and/or read-outs. Universal serial buses (USB) are an attractive alternative to less portable power sources and are currently available in many common electronic devices. Here, USB-powered μPADs (USB μPADs) are proposed as a fusion of both technologies to improve performance without adding instrumental complexity. Two ITP USB μPADs were developed, both powered by a 5 V potential provided through standard USB ports. The first device was fabricated using the origami approach. Its operation was analyzed experimentally and numerically, yielding a two-order-of-magnitude sample focusing in 15 min. The second ITP USB μPAD is a novel design, which was numerically prototyped with the aim of handling larger sample volumes. The reservoirs were moved away from the ITP channel and capillary action was used to drive the sample and electrolytes to the separation zone, predicting 25-fold sample focusing in 10 min. USB μPADs are expected to be adopted by minimally-trained personnel in sensitive areas like resource-limited settings, the point-of-care and in emergencies. Fil: Schaumburg, Federico. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentina Fil: Kler, Pablo Alejandro. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Centro de Investigaciones en Métodos Computacionales. Universidad Nacional del Litoral. Centro de Investigaciones en Métodos Computacionales; Argentina Fil: Carrell, Cody S.. State University of Colorado - Fort Collins; Estados Unidos Fil: Berli, Claudio Luis Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentina Fil: Henry, Charles S.. State University of Colorado - Fort Collins; Estados Unidos

China, a big paper-making country, produced hundreds of millions of tons of waste paper which contain a lot of fiber every year. Cellulose nanocrystals were extracted from recycled waste paper which can be a high value utilization of secondary fiber. In this paper, cellulose nanocrystals were successfully extracted from waste paper fibers via two different systems, sulfuric acid hydrolysis (SCNCs) and one-step ammonium persulfate (APS) oxidation (OCNCs). This not only broadened the methods of extracting CNCs from waste paper, but also improved the dispersion and reactivity of CNCs. The CNCs products were investigated by FT-IR spectroscopy for functional group structure, X-ray diffraction for crystal structure, TG-DTG for thermal stability and scanning electron microscope, transmission electron microscope for morphology. The results showed that both OCNCs and SCNCs were a rod-like structure. The crystallinity of OCNCs and SCNCs increased to 72.45 and 77.56, but with a low yield of 22.42% and 41.22%, respectively. The result also suggested H2O2 formed by decomposition of APS, selectively oxidized the hydroxyl on the C6 in cellulose to carboxyl, introduced 0.57 mmol/g carboxyl. Successful preparation of CNCs extracted from waste paper can effectively utilize the fiber resources in waste paper, thus transforming into higher economic benefits.

Paper-based microfluidic device was designed with wax-printing to combine potentiometric, fluorimetric and colorimetric detection zones. This newly developed trimodal paper chip has been used for on-site determination of ketamine hydrochloride (KET) as a date rape drug in beverages. The device employed polyaniline nano-dispersion as conducting polymer in ion sensing paper electrodes designed to fit USB plug connector. Carbon dots-gold nanoparticles and cobalt thiocyanate were used in fluorescence and color detection zones, respectively. Cellular phone's camera facilitated the on-site fluorimetric and color detection. The implemented trimodal detection system exhibited specificity for KET detection in the presence of several other beverage interferences i.e., biogenic amines. This innovative sensor brings together analytical figures of merit for effective KET detection in single aliquot of spiked beverages. The proposed paper-based chip also fulfils WHO criteria for point-of-care devices posing the proposed trimodal paper device as an active part for rapid, on-site drug diagnostics and to be applied further for other similar drugs.

Free proline, termed proline, is a biomarker used for diagnosing drought stress in plants. A previously developed proline–ninhydrin reaction-based paper sensor could quickly and easily detect proline, but it was limited by low sensitivity. In this study, we developed an enclosed multilayer paper-based microfluidic sensor with high sensitivity for the quantitative detection of proline in plants. The multilayer paper-based sensor was manufactured using simple wax printing and origami methods, and contained an internal mixing channel to allow good mixing of the proline with ninhydrin, increasing the proline–ninhydrin reactivity and providing accurate and sensitive proline detection. By preloading ninhydrin onto the sample loading area, uniform coloration of the sensing window was achieved, allowing quantitative analysis of various proline concentrations using a constant reaction time. Only the sensing window and sample loading area were exposed to limit sample evaporation and contamination from the external environment. The LOD of the fabricated sensor was 23 μM, which is approximately 29-fold lower than that of the previously proposed paper sensor (657 μM). Samples were extracted from A. thaliana plants subjected to drought stress for proline detection. The proline concentrations measured using the developed paper sensor and a spectrophotometric method were not statistically significant at a confidence level of 95%. Therefore, the developed sensor can be applied to measure proline concentrations precisely in the field with a low detection limit. The developed paper-based sensor can be used to detect the early stages of drought in plants and thus improve crop productivity.

Filter paper, as a widely used and low-cost lab consumable, can serve as template for the synthesis of one-dimensional (1D) materials since it is composed of 1D cellulosic fiber. In this work, 1D NiO/NiCo2O4 composite was simply fabricated by adsorption of Ni and Co acetate on the filter paper and subsequent calcination process. The precursors were obtained without further treatment to filter paper or chemical reaction between metal salts. Calcination process leads to the removal of template and formation of binary NiO/NiCo2O4 composite. Electromagnetic (EM) wave absorption performance of NiO/NiCo2O4 composite could be tuned by adjusting the calcination temperatures and dosage of metal salts. For the optimized absorber (calcination temperature of 600 °C and dosage of Ni and Co acetate with 2 mmol and 4 mmol), a wide absorption bandwidth of 6.08 GHz could be achieved with thickness of 1.88 mm and minimum reflection loss value was up to −57.4 dB by changing the thickness. The facile synthetic route may also inspire the preparation of other high-performance one-dimensional EM wave absorbing materials.

Gas chromatography is commonly employed to detect gaseous pollutants. However, gaseous pollutants in paper mills are multicomponent and difficult to be detected and analyzed by gas chromatography. Therefore, we developed a novel autoanalyzer with an embedded supervisory system, with which multicomponent gaseous pollutants in paper mills can be detected in real time. The autoanalyzer was applied in two paper mills for the detections of the total volatile organic compounds (TVOC) and benzene at five sampling sites. The detection results show that the TVOC concentrations in two mills exceed the standard severely, especially in mill A, which can be attributed to the application of pulping and bleaching chemicals. In addition, benzene is also detected in Mill A due to benzene release from the fluorescent brighteners in the papermaking section. The large amounts of TVOC detected in the sequencing batch reactor (SBR) equalization tank of Mill A are explained by their release from the biodegradation of wastewater.

This paper introduces the concept of "Drawing-PADs" (Drawing paper-based microfluidic analytical devices) allowing to intuitively evaluate the urinary albumin (Alb) index, a clinically important parameter used for the early detection of renal deficiencies related to diabetes, among others. To enable regular monitoring of the Alb index, a simple examination method suitable for self-diagnosis is highly desirable. The Drawing-PADs rely on the simultaneous naked eye detection of Alb and creatinine (Cre) on a single device according to the distance-based microfluidic PAD (μPAD) approach. The Alb index is visualized by simply drawing a straight line connecting the top of two color-changed assay channel sections (Alb and Cre channels), followed by visually confirming the position of the intercept of the drawn straight line. The semiquantitative Alb index evaluation performed with Drawing-PADs does not require any equipment such as a camera, software, or a color reference chart. The obtained results are independent of the sample volume and are not influenced by changes in the absolute Alb and Cre concentrations caused by urine excretion variations, making spot urine assays possible. Classification of Alb index values according to clinically relevant criteria (normoalbuminuria, microalbuminuria, and macroalbuminuria) is readily achieved within 15 min and has been validated for 15 human urine samples including diabetic patients and healthy volunteers.

This article identifies the technological characteristics of the paper manufacturing industry in the Valley of Mexican Basin (VMB)—a densely populated region characterized by absolute water scarcity—in order to quantify the intensity with which water is used. The method consisted of modeling the paper industry’s technology estimating Cobb-Douglas production functions at two moments in time. The comparison of both functions makes it possible to identify water saving technologies during this period, and to evaluate whether the industry has made adjustments to deal with water restrictions. The data is obtained from the Economic Censuses of the National Institute of Statistics Geography and Informatics 2009 and 2014. While our work must be considered preliminary owing to the somewhat irregular nature of the data, certain clear conclusions do stand out. The paper industry located in the VMB has drastically reduced its water usage during the period of time analyzed. This is explained by the adoption of water saving technologies in the industry. In the process, an increase in capital is the main variable to explain such a technical change. This is expressed in the manner in which water and capital inputs appear to be highly suitable substitutes in paper manufacturing.

In this study, the viability of acetylation in cellulose fibers waste (CFW) from pulp and paper mill sludge was investigated in comparison to bleached cellulose fibers (BCF). Four acetylation metho...

The diagnosis of dengue infection is still a critical factor determining success in the clinical management and treatment of patients. Here, the development of microfluidic paper-based analytical devices (μPADs) utilizing a sandwich immunoassay on wax patterned paper functionalized with anti-dengue NS1 monoclonal antibodies for point-of-care detection of dengue NS1 (DEN-NS1-PAD) is reported. Various assay conditions, including the length of the channel and diluent, were optimized, and the response detected by the naked eye and digitized images within 20–30 min. The DEN-NS1-PAD was successfully tested in the field for detecting dengue NS1 in buffer, cell culture media, and human serum. The limit of detection (LoD) of the DEN-NS1-PAD obtained with the naked eye, scanner, and a smartphone camera was 200, 46.7, and 74.8 ng mL−1, respectively. The repeatability, reproducibility, and stability of the DEN-NS1-PAD were also evaluated. High true specificity and sensitivity in the serum of pediatric patients were observed. These evaluation results confirm that the DEN-NS1-PAD can potentially be used in point-of-care dengue diagnostics, which can significantly impact on the spreading of mosquito-borne diseases, which are likely to become more prevalent with the effects of global warming.

The use of paper-based devices in combination with noninstrumental detection systems is becoming increasingly important in the analytical field due to its simplicity, rapidity, and low cost. However, their use for determination of volatile analyte derivatives is still relatively scarce. The present work reports on the assessment of a paper-based gas-sensing approach for the simultaneous noninstrumental colorimetric detection of nitrite and sulfide. Colorimetric systems based on the Griess and methylene blue assays, formation of colored metallic sulfides, and interaction/reaction with in situ generated metallic nanoparticles were preliminary evaluated. Then, the effect of experimental variables affecting the analytical performance of the paper-based gas sensor was studied with two digitization systems, namely a scanner and a smartphone. Under optimal conditions, the developed system yielded limits of detection of 0.055 and 0.005 mg/L for nitrite and sulfide, respectively. The repeatability, expressed as relative standard deviation, was found to be 5.9 and 6.7% for nitrite and sulfide, respectively. The proposed method was finally applied to the analysis of water samples, showing recoveries in the range of 95-105%.

In this study, different methods for incorporating mixed or laminar copper microparticles (CuMPs) during papermaking were evaluated to determine the optimum paper-making process and correlate particle concentration and shape with antimicrobial activity. The addition of CuMPs during the disintegration of dry pulp stage was observed to produce a paper with uniformly distributed CuMPs, as determined through optical microscopy and UV–Vis spectroscopy analyses by measuring absorbance spectra in different areas of papers. Determination of two indices related to the concentration and distribution of copper will allow to predict the copper content in other papers. CuMP-paper samples were evaluated for structural, optical, and mechanical strength properties according to paper industry standards. Quantitative analyses by atomic absorption showed that between 24 and 39% of CuMPs were embedded in the paper fibre, independent of particle type. Finally, antibacterial activity analyses were performed according to ISO 20645 and ISO 20743. The results showed that papers with 0.30 g of incorporated CuMPs have antimicrobial activity, independent of particle morphology, with effects observed towards Gram (+) and Gram (−) bacteria and fungus. Furthermore, the evaluation of antimicrobial activity at different times of exposure to the microorganisms showed differences in effects that were dependent on the shape of the CuMPs incorporated into paper, where laminar particles exerted a sufficient effect, while no or a slight effect was observed for mixed CuMPs against Aspergillus niger.

Because of numerous inherent and unrivaled features of nanofibers made of chitin, the second most plentiful natural-based polymer (after cellulose), including affordability, abundant nature, biodegradability, biocompatibility, commercial availability, flexibility, transparency, and extraordinary mechanical and physicochemical properties, chitin nanofibers (ChNFs) are being applied as one of the most appealing bionanomaterials in a myriad of fields. Herein, we exploited the beneficial properties offered by the ChNF paper to fabricate transparent, efficient, biocompatible, flexible, and miniaturized optical sensing bioplatforms via embedding/immobilizing various plasmonic nanoparticles (silver and gold nanoparticles), photoluminescent nanoparticles (CdTe quantum dots, carbon dots, and NaYF4:Yb3+@Er3+&SiO2 upconversion nanoparticles) along with colorimetric reagents (curcumin, dithizone, etc.) in the 3D nanonetwork scaffold of the ChNF paper. Several configurations, including 2D multi-wall and 2D cuvette patterns with hydrophobic barriers/walls and hydrophilic test zones/channels, were easily printed using laser printing technology or punched as spot patterns on the dried ChNF paper-based nanocomposites to fabricate the (bio)sensing platforms. A variety of (bio)chemicals as model analytes were used to confirm the efficiency and applicability of the fabricated ChNF paper-based sensing bioplatforms. The developed (bio)sensors were also coupled with smartphone technology to take the advantages of smartphone-based monitoring/sensing devices along with the Internet of Nano Things (IoNT)/the Internet of Medical Things (IoMT) concepts for easy-to-use sensing applications. Building upon the unrivaled and inherent features of ChNF as a very promising bionanomaterial, we foresee that the ChNF paper-based sensing bioplatforms will emerge new opportunities for the development of innovative strategies to fabricate cost-effective, simple, smart, transparent, biodegradable, miniaturized, flexible, portable, and easy-to-use (bio)sensing/monitoring devices., Financial support from the Chemistry & Chemical Engineering Research Centre of Iran (Tehran, Iran), Iran’s National Elites Foundation (INEF), Nano Novin Polymer Co. (Iran), and the Nano Match program of Iran Nanotechnology Initiative Council (INIC) are gratefully acknowledged. The ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa program of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO; grant nos. SEV-2017-0706 and MAT2017-87202-P). The financial support of “the Czech Science Foundation (No. 19-00676S)” is also greatly appreciated.

This work presents a novel development that exploits the concept of in-situ gas-separation together with a specific enzymatic colorimetric detection to produce a portable biosensor called “Blood Alcohol Micro-pad” for direct quantitation of ethanol in whole blood. The thin square device (25 mm × 25 mm × 1.8 mm) comprises two layers of patterned filter paper held together with a double-sided mounting tape with an 8-mm circular hole (the headspace). In operation, the reagent is deposited on one layer and covered with sticky tape. Then 8 μL of a blood sample is dispensed onto the opposite layer and covered with sticky tape. Diffusion of ethanol across the 1.6 mm narrow headspace permits selective detection of ethanol by the enzymatic reagents deposited on the opposite layer. This reagent zone contains alcohol oxidase, horseradish peroxidase and 2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt, as the chromogenic reagent. The color intensity, measured from the recorded digital image, resulting from the enzymatic assay of ethanol, correlates with the concentration of blood alcohol. The results obtained with spiked mice and sheep blood samples, using an external calibration in the range of 1–120 mg dL−1ethanol, gave recoveries of 93.2–104.4% (n = 12). The “Blood Alcohol Micro-pad” gave good precision with %RSD

Graphene oxide (GO) paper is an attracting structural material because of its high stiffness and light-weight. In order to exploit the high strength and stiffness of individual GO nanosheet into GO paper, the fabrication process must be optimized. In this study we fabricated ultra-stiff and strong GO paper by directed-flow vacuum filtration and compared its mechanical properties under different loading conditions. We also explored the effect of cross-linking with borax, thermal annealing and sonication to further enhance mechanical properties. The stiffest GO paper reported here has a tensile modulus of 109.9 GPa and a flexural modulus of 45.7 GPa. We also found that the flexural modulus of GO paper is significantly lower than the tensile modulus because of interlayer shearing, micro-buckling and delamination during flexural deformation. The properties of GO papers therefore need to be carefully selected for mechanical structures where flexion is the major deformation. This study provides significant insights about improving mechanical properties of GO paper and selecting GO paper for different loading conditions.

Background: Although some have noted that combining technical and marketing content is precarious, technical communication professionals are increasingly involved in content marketing, which includes the creation of white papers. Literature review: The little existing literature on white papers provides conflicting guidance about managing the combination of technical and marketing content. Both soft-sell and hard-sell marketing approaches have been recommended. One source of such inconsistent guidance may be the lack of agreement about definitions. Research on print advertisements has described hard and soft selling as multidimensional rather than binary aspects of persuasive appeals. Research question: Which dimensions of hard- and soft-sell appeals are predominant in white papers? Research methodology: To complete our descriptive study, we collected a corpus of documents labeled as white papers in TechRepublic, and then selected and trained three raters to complete a series of judgments about dimensions of persuasive appeals in the corpus. We aggregated those ratings, calculating the mean and standard deviation for the dimensions to describe their distribution across the corpus. Results/discussion: Overall, hard-sell dimensions were more prevalent than soft-sell dimensions. However, the soft-sell category of “implicitness” was also dominant. Conclusion: Our results demonstrate the value of treating hard and soft selling as multidimensional, complementary, and combinatory marketing appeals that allow, for example, a single white paper to be both “subjective” (soft sell), and “precise” (hard sell), or both “creative” (soft sell) and “informative” (hard sell).

Mixed office waste paper (MOWP) is a low cost, high quality and easily collected fiber source for the papermaking industry. Unfortunately, limits in the application of traditional deinking are related to the negative environmental impacts of using chemicals during the deinking process. Hence, enzymatic deinking has received growing attention in the last decade. This study investigates the effect of using the effective enzymes produced from Rhizopus microspores AH3 which is grown on watermelon peel waste (WPW) extract, as a bio-deinking method in the deinking of MOWP, which is difficult to recycle because of their ink type and printing process. The methodology involves preparation of samples, impregnation with water, enzymatic treatment, washing, papermaking, evaluation of the produced paper sheets. The evaluation includes determination of the optical and mechanical properties as well as topographic investigation via scanning electron microscope of produced paper sheets. The results showed that there is an improvement in both optical and mechanical properties of all paper sheets produced in this study. The best enhancement was for medium B30 which was extracted by boiling of WPW for 30 min. This treatment gave high enhancement because of the effect of the produced enzymes from Rhizopus microspores AH3, where cellulase, xylanase, lignin peroxidase, poly phenol oxidase and laccase were 1.62, 1.49, 1.38, 1.2 and 1.5 U/ml, respectively. Moreover, the tensile strain (maximum load) increased by about 77% as well as the brightness percentage achieved about 86.78% and the deinking ability was increased approximately 16%.

The thin-layer drying performance for a typical solid waste (paper towel) was evaluated at hot air temperatures of 90–130 °C (0.5 m/s air velocity) and microwave powers of 200–800 W in a bench-scal...

An improved lab-scale anaerobic baffled reactor was developed to treat recycled paper mill effluent (RPME). In this study, analysis of modified anaerobic baffled reactor (MABR) performance in RPME ...

Green/sustainable cellulose paper-based platforms at point-of-care testing have received much interest in biomedical fields at resource-limited settings. In such platforms, biomolecules would have to be immobilized onto paper substrate to achieve detection. Therefore, effective molecule immobilization is critical for the performance of paper-based testing, especially the detection sensitivity. Although various methods have been developed to improve the detection sensitivity, the immobilization capacity of biomolecules has not been considered yet. In this study, we developed a facile method for modifying paper materials by incorporating chitosan into NC membrane, which has positive effect on the pore size, porosity, and surface groups of NC membrane, hence, enhancing the immobilization capacity of biomolecules on paper substrate. We demonstrated the effectiveness of the above mentioned approach by using nucleic acid lateral flow assay (NALFAs) as a model paper-based platform; in comparison with the unmodified NALFAs, the results showed ten-fold increase in the detection sensitivity for HBV. We envision that this facile modification method will have a great potential for developing other highly sensitive paper-based detecting platforms.

Bioethanol production using paper wastes seems a promising approach towards sustainable energy, but mainly hindered by hazardous ink. Therefore, in our experimental plan various methods were applied for the deinking of waste newspapers, laser printed papers and examination papers. A newly designed paper pulper reduced the pulping time from 6 h to 2 h. Cellulase (15 FPU/g) from Aspergillus oryzae MDU-4 was found effective for the deinking of newspapers, whereas laccase isozymes (150 U/g) from Ganoderma lucidum MDU-7 along with 2 mM HOBt was preferred for the ink removal and degradation from the examination papers. Ozonation in the presence of Tween-80 was found to be efficient in the removal of toxic toners used in laser printing papers. The biologically and physically deinked papers, studied with the help of SEM, TEM, FTIR, and XRD analysis revealed significant changes in the chemical and surface structure. Moreover, the saccharification of deinked papers with the help of an enzymatic consortium of Trichoderma citrinoviride MDU-1 resulted in 305 mg/g, 377 mg/g, and 409 mg/g release of sugars from the newspaper, examination paper, and laser printed paper, respectively. Finally, the enzymatic hydrolysates fermented with Saccharomyces cerevisiae NCIM-3640 produced 3.35 g/L ethanol, with 40.85% ethanol yield.

Cytochrome P450 (CYP450), and in particular CYP3A4, is the most abundantly expressed CYP450 isozyme implicated in many drug-drug and medicinal plant-drug interactions. Therefore, incorporation of CYP3A4 enzyme screening at an early stage of drug discovery is preferable in order to avoid enzymatic interactions. Here we present for the first time a paper-based CYP3A4 immobilized sol-gel-derived a platform using resorufin benzyl ether as a fluorogenic enzyme substrate used to investigate enzyme activity. The fluorescence intensity of the product can be simply quantified by using a handheld digital microscope and an image analysis software. The limit of quantitation was 0.35 μM with good precision (RSDs 0.05), while offering simplicity and lower cost. Kinetic parameters of the immobilized CYP3A4 in sol-gel coated paper were calculated from the Lineweaver-Burk plot, including Michaelis constant (Km) and maximum velocity (Vmax), which were 2.71 ± 0.35 μM and 0.43 ± 0.05 μM/min, respectively. Moreover, a functional test of these devices was conducted by assessments of known CYP3A4 inhibitors (i.e. ketoconazole, itraconazole) and inducers (i.e. phenytoin, carbamazepine). To further demonstrate the broad range of uses, the devices were utilized to assay plant extracts i.e. Areca catechu seeds, Camellia sinensis leaves, Eclipta prostrata aerial part, providing results in good agreement with previous studies. Furthermore, the sol-gel immobilized enzyme stored at 4 °C can increase storage stability, offering the activity of 86.3 ± 0.4% after 3-weeks storage, equivalent to the activity of the free enzyme solution after 1-week storage. The developed paper-based devices offer versatility, portability and low-cost.

In this study, we developed a point-of-care assay platform with simultaneous detection and self-calibration capabilities for multiple targets based on a microfluidic paper-based analytical device (μPAD). This system is easily manufactured using a wax printing method on chromatographic paper. The design pattern consists of a zone of detection and a calibrant zone for controlled loading using wax barriers with different thicknesses. We showed the utility and applicability of this approach by a proof-of-concept study for two clinically important markers: glucose and lactate. With the naked eye, the results could be fully distinguished and recorded to evaluate the analytical performance with a flatbed scanner. The detection limits of glucose and lactate were 0.3125 mM and 0.2975 mM, respectively, and simultaneous detection was possible from a small sample (0.4 μL) with high sensitivity. Furthermore, this device has a self-calibration function, which minimizes the influence of environmental conditions (i.e., ambient light intensity, temperature, humidity, and pressure). Therefore, the developed multiplex paper-based device is promising for clinical multianalyte point-of-care testing since it is easy to manufacture, cost-effective, user-friendly, and highly sensitive.

This study is the first, to the best of our knowledge, where waste napkin paper was successfully valorized to low-density (27.2 mg cm−3) cellulose aerogels for oil sorption material. Two simple methods with different gel coagulators, ethanol and sulfuric acid, were used for preparation of the aerogel. Conditions for the alkaline treatment of the raw material and the pre-freezing temperature in the lyophilization process were optimized. It was found that the water and oil sorption capacities of the aerogels were not significantly affected by alkaline treatment, while they could be adjusted by changing the pre-freezing temperature. Although the produced aerogels were initially amphiphilic, hydrophobic surfaces were obtained by vapor deposition of methyltrimethoxysilane (MTMS) and these materials possessed high sorption capacities, up to 32.24 cm3 g−1 (28.56 g g−1) for pump oil and 26.77 cm3 g−1 (39.59 g g−1) for chloroform. This was comparable to aerogels prepared from fresh cellulosic materials via the sol-gel method, as their sorption capacities varied in the range of 14–45 g g−1.

Real-time monitoring of neonicotinoid pesticide residues is of great significance for food security and sustainable development of the ecological environment. Herein, a paper-based surface-enhanced Raman scattering (SERS) amplified approach was proposed by virtue of multilayered plasmonic coupling amplification. The unique plasmonic SERS multilayer was constructed using three-dimensional (3D) silver dendrite (SD)/electropolymerized molecular identifier (EMI)/silver nanoparticle (AgNP) sandwich hybrids with multiple hotspots and a strong electromagnetic field in nanogaps. Dendritelike 3D silver materials with remarkably high accessible surface areas and the lightning rod effect constituted the first-order enhancement of paper-based sensors. Molecular identifiers coated upon an SD layer as the interlayer were used for target capture and enrichment. Subsequently, AgNPs featuring rough surface and local plasma resonance decorated as the top layer formed the secondary enhancement of the amplification strategy. As the most brilliant part, dendritelike 3D silver coupled with AgNPs has established double Ag layers to accomplish a multistage enhancement of SERS signals based on the superposition of their electromagnetic fields. Owning to the distinctive design of the multiple coupling amplification strategy, the fabricated SERS paper chips demonstrated impressive specificity and ultrahigh sensitivity in the detection of imidacloprid (IMI), with a detection limit as low as 0.02811 ng mL-1. More importantly, the multiple SERS enhancement paper chip holds great potential for automated screening of a variety of contaminants.

We report a smartphone–paper-based sensor impregnated with cetyltrimethylammonium bromide modified silver nanoparticles (AgNPs/CTAB) for determination of Fe3+ in water and blood plasma samples. The methodology for determination of Fe3+ is based on the change in signal intensity of AgNPs/CTAB fabricated on a paper substrate after the deposition of analyte, using a smartphone followed by processing with ImageJ software. The mechanism of sensing for detection and determination of Fe3+ is based on the discoloration of AgNPs which impregnated the paper substrate. The discoloration is attributed to the electron transfer reaction taking place on the surface of NPs in the presence of CTAB. Fe3+ was determined when the paper was impregnated with 1 mM AgNPs for 5 min of reaction time and the substrate was kept under acidic conditions. The linear range for determination of total iron in terms of Fe3+ was 50–900 μg L−1 with a limit of determination (LOD) of 20 μg L−1 and coefficient of variation (CV) of 3.2%. The good relative recovery of 91.3–95.0% and interference studies showed the selectivity of the method for determination of total iron in water and blood plasma samples. Smartphone–paper-based sensors have advantages of simplicity, rapidity, user-friendliness, low cost, and miniaturization of the method for on-site determination of total iron compared to methods that require sophisticated analytical instruments.

Cellulose is the main component of transformer insulating paper. In this paper, the pyrolysis mechanism of cellulose is studied by means of computational chemistry. This study is aimed at exploring the generation process of the methanol from cellulosic insulating paper at the atomic level. A simulation scheme of cellulose pyrolysis with detailed reaction pathways for methanol production has been obtained that is not readily accessible by experiments. The molecular dynamics method based on reactive force field (ReaxFF) is adopted to simulate the pyrolysis of cellobiose. A model composed of 40 cellobioses simulated at 500–3000 K was established, and the force biased monte-carlo is mixed into ReaxFF to make it closer to the actual situation and ensure the reliability. The result reveals that the –CH2– group from the C5 (or $${\text{C}}_{ 5}^{{\prime }}$$) group in cellobioses grabbed the nearby H atom to form methanol. In the pyrolysis process of cellobioses, methanol is stable at the early stage but unstable even disappeared in the later stage. The pre-exponential factor A and activation energy Ea of the ReaxFF-MD simulation are consistent with previous experimental results. Thus, this study provides an effective theory of the methanol as an indicator to evaluate the aging condition of cellulosic insulating paper in the early stage at the atomic level.

Regulating the fluid flow in microfluidic devices enables a wide range of assay protocols for analytical applications. A programmable, photo-paper-based microfluidic device fabricated by using a method of cutting and laminating, followed by printing, is reported. The flow distance of fluid in the photo-paper-based channel was linearly proportional to time. By printing silver nanoparticle (AgNP) and poly[4,5-difluoro-2,2-bis(trifluoromethyl)-1,3-dioxole-co-tetrafluoroethylene] (PTFE) patterns on the surface of a photo-paper-based channel, we were able to either increase or decrease the fluid flow in the fabricated microfluidic devices, while maintaining the linearity in the flow distance-time relation. In comparison to the speed of fluid flow in a pristine channel, by using hydrophilic AgNP patterns, we were able to increase the speed in the channel by up to 15 times while we were able to slow the speed by a factor of 3 when using hydrophobic PTFE dots. We then further demonstrated a single-step protocol for detecting glucose and a multi-step protocol for detecting methyl paraoxon (MPO) with our methods in photo-paper-based microfluidic devices. This approach can lead to improved fluid handling techniques to achieve a wide range of complex, but programmable, assays without the need for any additional auxiliary devices for automated operation.

The single-use of large volumes of paper has become a serious issue which is depleting our resources and damaging the environment. It is of great significance and challenging to adopt simple, reasonable and practical methods to prepare functional recyclable paper. In this article, inspired by pleochromatic creatures and plant leaves' special wettability, a series of photochromic amphiphobic recycled paper (PARi) products was successfully prepared by adding gourd-like modified tungsten trioxide (MTT) to waste paper pulp. The results show that PAR2–7 has excellent lyophobic performance and amazing photochromic properties. It is worth noting that PAR7 has an impressive amphiphobic behavior, and its surface water contact angle (WCA) and oil contact angle (OCA) are 146 ± 1° and 137 ± 1°, respectively. It can withstand continuous ultraviolet light irradiation for 60 h, indicating excellent resistance to ultraviolet radiation. Most importantly, the reversible photochromic properties of PAR7 make it possible to write repeatedly on the surface by using ultraviolet light. In short, the performance of the prepared PAR is stable and superior, which can not only alleviate paper waste, but also means it has great potential in the fields of decoration, packaging, and banknote anti-counterfeiting technology.

Trap plays an important role in the charge transportation of three-layer oil-paper and the investigation of trap parameters at different degradation degree is of great significance for further research of the partial discharge (PD) mechanism. This article considers the turn-to-turn structure of on-board traction transformer. A defect model of three-layer oil-paper insulation was designed for PD test. The PD degradation samples are selected from the inception of PD to the breakdown of PD to study the characteristics of surface potential decay on degradation samples by using isothermal surface potential decay method. Given that, the trap distribution at different degradation stages was calculated and its influence on PD characteristics was investigated. The result shows that AC fluctuation voltages caused by inter-harmonic has a great influence on PD distribution, surface charge distribution and trap distribution. With the increase of degradation, the decay rate of surface potential increases and the decay rate of AC fluctuation voltages is larger than that pure AC. And also, the number of shallow trap with AC fluctuation voltages is larger than that with pure AC. The rate of free charge increases with the number of shallow trap increasing. More free electrons involves in the process of PD, accelerating the aging rate of three-layer oil paper samples. Therefore, it can be concluded that surface charge and trap distribution are helpful to clarify PD mechanism.

Insulated tubular busbar is a new type of current-carrying equipment with excellent performance. However, the research on this equipment is insufficient because of the short application and the lack of technical digestion, which has resulted in many accidents. In this paper, the full-scale model of epoxy-impregnated-paper insulated tubular busbar with bubble defects was designed and produced, its electrical breakdown process was investigated by withstand voltage test. In the experiment, the failure mode of breakdown caused by gas expansion was found for the first time. The research showed that the electrical-mechanical breakdown process could be divided into two stages: gas increase stage and breakdown threshold stage. The research also obtained the characteristics and the change criterions of the two stages. The gas in the bubble defects generated from epoxy decomposition which caused by partial discharge. When the gas pressure exceeds the critical fracture toughness of the bubble defects wall, the unstable crack extension occurs, therefore, improving the ability about resistance to partial discharge of epoxy resin or improving the fracture toughness of epoxy resin by modifying would enhance the breakdown performance of insulated tubular busbar. The result also has reference significance for other epoxy-impregnated-paper insulated electrical equipment.

An electrical tree discharge model of multilayer insulation paper was prepared, and a voltage of 20 kV was used for electrical tree cultivation and initiation tests. Based on the microscopic image information and partial discharge (PD) information during the aging of the electrical tree, the development of electrical tree discharges between layers of paper comprising epoxy resin-impregnated paper insulation was studied. The results show that, by analysing PD information such as the discharge volume phase spectrum and the discharge repetition rate phase spectrum, the development of the electrical tree branch progresses in four stages: initial, growth, stagnation, and bursting. During the growth and stagnation stages, the main discharge paths of the electrical tree are mainly formed, and there are many filamentous fibres on the path edge. During the burst stage, more branches will be formed on the electrical tree, which will cause the greatest damage to the insulation. With the extension of the electrical tree path, the discharge magnitude and discharge times also increase. There are specific discharge patterns in different growth stages of the electrical tree, and the number of discharge events in each positive half-cycle is significantly greater than that in a negative half-cycle. Combining the microscopic image information and PD information during the aging of such an electrical tree, a theoretical basis for evaluating insulation state by PD monitoring is realised. The long-chain molecules of cellulose and epoxy resin break bonds and oxidise, which decompose into a large number of free radicals, monosaccharides, and other low-molecular-weight products.

The dissemination of emerging electronic devices increases considerably alongside with the Internet of Things (IoT) paradigm. Some key elements considered in these devices (e.g. rare-earth) are becoming critical materials and are associated with serious environmental concerns. Therefore, there is a major requirement for designing differently our electronic technologies at the early stages of the research process. Many reports present the promising properties of paper-based electronics as meant to address this challenge. Through technical and life cycle assessments, this article discusses the main design levers in terms of material and fabrication process choices for the eco-design of paper-electronics water quality sensors. Our results suggest conscientious choices of conductive nanomaterials and additive fabrication techniques.

This work reports the development of a rapid, simple and inexpensive colorimetric paper-based assay for the detection of the severe acute respiratory symptom coronavirus 2 (SARS-CoV-2) humanized antibody. The paper device was prepared with lamination for easy sample handling and coated with the recombinant SARS-CoV-2 nucleocapsid antigen. This assay employed a colorimetric reaction, which is followed by horseradish peroxidase (HRP) conjugated detecting antibody in the presence of the 3,3',5,5'-tetramethylbenzidine (TMB) substrate. The colorimetric readout was evaluated and quantified for specificity and sensitivity. The characterization of this assay includes determining the linear regression curve, the limit of detection (LOD), the repeatability, and testing complex biological samples. We found that the LOD of the assay was 9.00 ng μL-1 (0.112 IU mL-1). The relative standard deviation was approximately 10% for a sample number of n = 3. We believe that our proof-of-concept assay has the potential to be developed for clinical screening of the SARS-CoV-2 humanized antibody as a tool to confirm infected active cases or to confirm SARS-CoV-2 immune cases during the process of vaccine development.

A new type of hydrogel-coated paper sensor was developed for the semiquantitative and naked-eye detection of Cu2+ ions with high selectivity and good regenerability. The paper sensor showed a continuous color change from colorless to blue, resulting in semiquantitative naked-eye detection. Furthermore, similar to the classical pH test paper, a standard colorimetric card was used in the visual detection of Cu2+ ions by identifying the RGB value of the hydrogel-coated paper sensor. The application of the standard colorimetric card has greatly shortened the detection time and reduced the cost of detection, providing a new strategy for the naked-eye and semiquantitative detection of heavy-metal ions in water samples.

The application of pulp and paper fibers as reinforcement in thermoplastic composites involves several advantages, such as sustainability, constant fiber quality and high mechanical properties. This work compares three different processing methods for the production of paper-reinforced polypropylene composites. The composites were produced by (i) hot pressing, (ii) injection molding and (iii) a pre-coating process with fiber volume fractions between 10 and 65%. The mechanical properties were investigated by tensile and flexural testing. Furthermore, SEM analysis and porosity determination were carried out. The results were correlated with the according processing method and evaluated towards the highest composite performance. As a result, laminated composites with intact paper layers, showed significantly higher mechanical properties, due to the fiber orientation in the paper sheet and good adhesion between the matrix and the paper fibers. Compounded and injection molded composites showed a high degree of fiber agglomeration and less orientated fibers in the composite leading to reduced mechanical properties.

Abstract writing is a very important since it is the piece of formal writing which should attract the attention of the reader and make him/her read the rest of the paper. Thus, it must be clear, concise, coherent, and powerful enough to attract the reader and provide him/her with the key information about the content of a research paper. All university students have to write an abstract in English in their qualification papers. However, non-native students of English usually have difficulties in writing an abstract in English. For example, the Czech students lack formal writing skills in English since the skill of formal writing is not developed enough in their native language, i.e. Czech. Therefore, the aim of this article is to discuss the use of an off-line scaffolding tool, which can help students develop an abstract in English, as well as to demonstrate how this tool can be incorporated in the whole Course of Practical English taught at the Faculty of Informatics and Management of the University of Hradec Kralove in the Czech Republic. The application was developed for students as support to a face-to-face class instruction, which proved to be insufficient in teaching students how to write an abstract in English. The application reflects the structure and sentence functions of the abstract and provides students with a model abstract, as well as with additional formulations. Overall, the application was designed with the purpose to enhance student’s skill of writing an abstract in English, as well as to lead students to successfully complete the task by making the application user-friendly - easy-to-use, accessible and transferrable as far as the knowledge is concerned. The application aims to enhance students’ autonomous learning by tailoring the content to their specific needs and making it accessible anytime and from anywhere.

In this work, Au nanoparticle (AuNP)-modified filter paper as a highly sensitive mercury extractant was successfully prepared in situ and applied in the head-space solid phase extraction (HS-SPE) of Hg(II) in water. The microstructure of the modified filter paper was characterized by using X-ray diffraction and scanning electron microscopy (XRD/SEM), and the results showed that AuNPs were well distributed on the fiber surface of the filter paper. Combined with portable Zeeman atomic absorption spectroscopy (ZAAS), the modified filter paper was successfully applied to Hg detection in water samples. Specifically, it can easily achieve in situ sample collection and detection under negative pressure in the field, which was reported for the first time. Several influencing factors such as extraction temperature, time, stirring speed, pH value, reductants, inorganic ions, and organic interfering and complexing agents were all investigated thoroughly. The limit of detection (LOD) for Hg(II) was 0.09 μg L−1, with linearity ranging from 0.09 to 50 μg L−1. Good recoveries were also obtained between 82 and 106% with RSDs below 7% in real water samples. The established method provided a convenient route for mercury detection in environmental water with a low amount of sample required (1 mL) and good detection performance, which is comparable to that of ICP-MS.

This paper presents the design and analysis of a paper-based chipless RFID sensor for wetness content measurement in plant leaves. The sensor is designed using a passive microwave resonator to measure the ambient physical parameter. The resonator is designed with a rectangular loop inductively coupled with an interdigital capacitor. The experimental analysis of the designed sensor is illustrated here to prove its efficacy. The resonator provides adequate backscattered signal for wireless measurement in the microwave frequency band. When interrogated with a couple of UWB antennas and a VNA, it yields accurate leaf wetness response of the plant. The commercial competence of this sensing device is validated through its experimental analysis on three different types of leaf samples. This sensor is suitable for plant health monitoring in any small-scale gardening applications such as nurseries and greenhouses.

This paper describes a method to fabricate microfluidic paper-based analytical devices (μPADs) using a toner laser printer. Multiple methods have been reported for the fabrication of μPADs for point-of-care diagnostics and environmental monitoring. Despite successful demonstrations, however, existing fabrication methods depend on particular printers, in-house instruments, and synthetic materials. In particular, recent discontinuation of the solid wax printer has made it difficult to fabricate μPADs with readily available instruments. Herein we reported the fabrication of μPADs using the most widely available type of printer: a toner laser printer. Heating of printed toner at 200 °C allowed the printed toner to reflow, and the spreading of the hydrophobic polymer through the filter paper was characterized. Using the developed μPADs, we conducted model colorimetric assays for glucose and bovine serum albumin (BSA). We found that heating of filter paper at 200 °C for 60 min caused the pyrolysis of cellulose in the paper. The pyrolysis resulted in the formation of aldehydes that could interfere with molecular assays involving redox reactions. To overcome this problem, we confirmed that the removal of the aldehyde could be readily achieved by washing the μPADs with aqueous bleach. Overall, the developed fabrication method should be compatible with most toner laser printers and will make μPADs accessible in resource-limited circumstances.

Recently, portable sensing devices with point of care testing (POCT) capability have attracted great attention due to their inherent affordability and accessibility in low resource areas. Paper sensors possess excellent potential as POCT platforms because of low cost, ease of operation, disposability and high-volume manufacturing. Paper sensors that incorporate functional nucleic acids (FNAs) as recognition elements are particularly attractive given that FNAs can be isolated from random-sequence nucleic acid pools to recognize, or respond to, virtually any target of interest. In this review, the advantages of FNAs, particularly DNA aptamers and DNAzymes, as recognition elements for the design of paper sensors are first discussed. This is followed by reviewing three specific types of FNA based paper sensors: dot blots, lateral flow assays, and microfluidic paper-based analytical devices. Furthermore, advances in the signal reporting methods used by FNA based paper sensors are summarized. Finally, limitations of current FNA based paper sensors are discussed along with considerations of future research directions.

The low frequency section of frequency domain spectroscopy (FDS) of oil-paper insu- lation system can effectively reflect the ageing state and moisture of the oil-immersed paper. Meanwhile, steady-state insulation resistance is the one of indexes for the condition of transformer. In actual measurement, these two both are time-consuming and poor accessibility, thereby restraining their field applications. Aim at this problem, this paper analyses the polarization process of the oil-paper insulation in transformer, and adopts a low frequency equivalent circuit model for the oil-paper insulation to characterize the polarization process at low frequency. The simulated annealing particle swarm optimization (SAPSO) algorithm is proposed to identify the parameters in equivalent circuit, which are affected by change of insulation state. Compared with the experimental results, the errors of the steady-state insulation resistance and the tan δ below 10-3 Hz, which are calculated by the identified parameters, are less than 2.5%. This method can avoid the influence from external environment and reduce the measurement time. The time and frequency domain parameters calculated can provide reference for the ageing assessment of oil-immersed paper.

Herein, we report a KBr-impregnated paper substrate as a sample probe to enhance the attenuated total reflection-Fourier transform infrared (ATR-FTIR) signal strength of anionic surfactants (AS) and non-ionic surfactants (NS) in an aqueous solution. The mechanism for the sensing of AS and NS is based on the strong interaction of surfactants with the silicate groups (SiO44−) of the KBr-impregnated paper substrate. The role of SiO44− on the surface of the paper is to enhance the adsorption of AS and NS, resulting in improved IR signal intensities for the target analytes. The improved signal intensity at 1253 cm−1 (SO42−, symmetric stretching) for AS and 1114 cm−1 (C–O–C, stretching vibration) for NS were selected for quantification. SEM-EDX was employed to determine the elemental compositions of pre- and post-adsorbed AS and NS on glass fibre filter paper (GFF). The linear range for the determination of AS and NS was 10–100 μg L−1 with a method detection limit (MDL) of 4 μg L−1 and method quantification limit (MQL) of 12 μg L−1. The good relative recovery of 71.4–109.7% and the interference studies showed the selectivity of the method for the determination of AS and NS in environmental water and commodity samples. The advantages of this method include its cost-effectiveness, enhanced sensitivity, disposability and accessibility of the paper substrate.