Search

Lacustrine shale oil resources in China are abundant, with remarkable exploration breakthroughs being achieved. Compared to marine shale oil in North America, efficient exploration of lacustrine shale oil is more difficult; thus, selecting favorable layer and optimization zone for horizontal wells is more important. In this study, based on systematic coring of approximately 500 m fine-grained deposits of the Kong 2 Member, combining laboratory tests and log data, source rock geochemistry and reservoir physical properties, the favorable rock fabric facies for oil accumulation was analyzed and classified. First, the dominant lithologic facies, organic facies, and bed combination facies were determined based on mineral composition from logging, total organic content (TOC), and sedimentary structure. Secondly, 10 fabric facies were classified by combining these three facies, with 4 fabric facies were found to have high TOC content, high total hydrocarbon, and strong fluorescence features, indicating good shale oil enrichment. Thirdly, the distribution of the upon good fabric facies was identified to be located at the top of the Kong 2 Member, with evidences of seismic resistivity inversion, thermal maturity, structure depth, and strata thickness. And the favorable facies were found to be stably distributed lateral at the area of about 100 km2. High oil flow has been detected at this layer within this area by several wells, including horizontal wells. The exploratory study of fabric facies classification and evaluation provides a new research idea for lacustrine shale oil exploration and effectively promotes breakthroughs in lacustrine shale oil exploration in Bohai Bay Basin.

High-yielding oil wells were recently found in the first member of Paleogene Shahejie Formation, the Binhai area of Qikou Sag, providing an example of medium- and deep-buried high-quality reservoirs in the central part of a faulted lacustrine basin. By using data of cores, cast thin sections, scanning electron microscope and physical property tests, the sedimentary facies, physical properties and main control factors of the high-quality reservoirs were analyzed. The reservoirs are identified as deposits of slump-type sub-lacustrine fans, which are marked by muddy fragments, slump deformation structure and Bouma sequences in sandstones. They present mostly medium porosity and low permeability, and slightly medium porosity and high permeability. They have primary intergranular pores, intergranular and intragranular dissolution pores in feldspar and detritus grains, and structural microcracks as storage space. The main factors controlling the high quality reservoirs are as follows: (1) Favorable sedimentary microfacies of main and proximal distributary gravity flow channels. The microfacies with coarse sediment were dominated by transportation and deposition of sandy debris flow, and the effect of deposition on reservoir properties decreases with the increase of depth. (2) Medium texture maturity. It is shown by medium-sorted sandstones that were formed by beach bar sediment collapsing and redepositing, and was good for the formation of the primary intergranular pores. (3) High content of intermediate-acid volcanic rock detritus. The reservoir sandstone has high content of detritus of various components, especially intermediate-acid volcanic rock detritus, which is good for the formation of dissolution pores. (4) Organic acid corrosion. It was attributed to hydrocarbon maturity during mesodiagenetic A substage. (5) Early-forming and long lasting overpressure. A large-scale overpressure compartment was caused by under-compaction and hydrocarbon generation pressurization related to thick deep-lacustrine mudstone, and is responsible for the preservation of abundant primary pores. (6) Regional transtensional tectonic action. It resulted in the structural microcracks.

Under the general trend of stepping-up oil and gas exploration and development in China, the unconventional oil and gas resources such as shale oil and gas have become an important alternative. Abundant continental shale oil resources are developed in Member 2 of Kongdian Formation (Ek2) of the Cangdong sag in the Huanghua depression of the Bohai Bay Basin which has complex structure, strong heterogeneity, and large buried depth, thus, the geological characteristic of shale oil accumulation and key exploration technologies are investigated on base of the system coring of 635.8 m, centimeter-level fine description and analysis of over ten thousand samples, therefore, the “four accurate” technologies have been developed, including the accurate selection of sweet spot areas, accurate drilling of sweet spot layers, accurate fracturing of sweet spot layers and accurate measure of fracture-rich sections. The results show that the continental shale strata in Member 2 of Kongdian Formation can be divided into three types: felsic shale, limy dolomitic shale and mixed shale. The Member 2 of Kongdian Formation is characterized by diverse mineral components, abundant laminae, good source rocks and medium thermal evolution degree, tight reservoir with rich micropore and microfractures, high oil saturation and brittle mineral content, indicating good prospect of shale oil exploration. Through sedimentological study, TOC and Ro evaluation, brittle mineral calculation, and seismic fusion inversion, a total of 126 km2 of Class I sweet spots in Member 2 of Kongdian Formation was delineated comprehensively, which guides horizontal well deployment (Well GD1701H and Well GD1702H). The drilling rate of sweet spot of these two horizontal wells is up to 96% by tracing thin layer through fine calibration, locating compartment through fine inversion, ensuring window entry through precise positioning, and tracking sweet spot through adjustment. The ''one-excellent and five-highs” criterion is used to select perforation points to realize differential designs of fracturing intervals and clusters. Micro-seismic and potentiometry monitoring show that the artificial fractures formed by volumetric fracturing are 300–400 m long and 120 m high, and control a volume of about 0.07 km3. The maximum daily oil production of two horizontal wells is 48 t and 66 t respectively to realize the economic exploitation of shale oil reserves controlled by fractures. The shale oil exploration in Member 2 of Kongdian Formation shows that the continental shale oil has great potential of exploration and development, and the above technologies are critical and effective for shale oil efficient recovery. Keywords: Shale oil, Sweet spot evaluation, Fracturing intervals and perforation clusters, Member 2 of Kongdian formation, Cangdong sag, Bohai Bay Basin

Petroleum geology and deposition features of the fine grain phase region in the second member of the Kongdian Formation were investigated using traditional petroleum geology and sedimentary petrology. New theories for shale oil and gas formation, based on data from 500 m continuous coring, systematic analysis of over ten thousand core samples, and logging data in the center of the lake basin in the Cangdong Sag (Bohai Bay Basin, China) were developed to determine the distribution of shale oil and provide a basis for shale oil exploration deployment. Results showed that a wide distribution of semi-deep to deep lake sub-facies fine-grained sediment (shale) was deposited in the study area during the largest lake flooding period. This sediment consists of felsic shale, mixed shale, and dolomites, but no clay shale. The shale features multiple rock components with few dominant minerals; high clastic mineral content and low clay mineral content; rich analcite and lean pyrite; rich brittle minerals with lean quartz; diverse rock types with limited shale oil; more tight reservoirs and fewer reservoirs with no fractures; more high-quality source rock with less non-hydrocarbon source rock; and more high frequency cycles with fewer monolithic deposits. Results indicate that dolomites are located in strips on the plane and are locally enriched, contradicting the understanding that only hydrocarbon source rock, and no reservoirs, develop in the middle of a continental closed lake basin. The study region demonstrates good conditions for shale oil formation, a favorable configuration of source rock and reservoirs, and 260 km2 of sweet spots, indicating high exploration value. Several prospecting wells have obtained industrial oil flow with guidance based on geological knowledge and engineering technology support.

Based on the merged 3D seismic data, well logging, formation testing, analysis and testing data, the structural evolution, sedimentary reservoirs, thermal evolution of source rocks were investigated of Paleogene Kongdian Formation in the trough area of Cangdong sag, Bohai Bay Basin. A conventional-unconventional hydrocarbon accumulation pattern in the trough area of rifted basin was revealed. The reservoir forming elements in the trough area of Cangdong sag have a zonation feature in terms of reservoirs and source rocks. There are two types of reservoir forming models, primary trough and reformed trough. The formation and evolution of trough controlled the orderly distribution of conventional oil to unconventional oil in the trough. Particularly, structural reservoirs occur in the upper part of the trough, stratigraphic-lithologic reservoirs are likely to form in the delta front deposits at the outer ring of trough, the middle ring transitional belt is the favorable site for tight oil reservoirs, while the fine grain deposits zone in the inner ring is shale oil and gas exploration area. The study has pointed out the new domains and directions for searching reserves in the secondary exploration of mature oilfields. Key words: rifted basin, trough hydrocarbon accumulation, stratigraphic-lithologic reservoir, shale oil, orderly accumulation, Bohai Bay Basin, Cangdong sag, Paleogene Kongdian Formation

The origin of the Upper Paleozoic hydrocarbon accumulations in the Huanghua Depression of Bohai Bay Basin was studied by petrography and Rock-Eval pyrolysis on more than 90 coal, dark mudstone, and...

A deep understanding of the basic geologic characteristics of the fine-grained shale layers in the Paleogene 1st sub-member of Kong 2 Member (Ek21) in Cangdong sag, Bohai Bay Basin, is achieved through observation of 140 m continuous cores and systematic analysis of over 1 000 core samples from two wells. Basic geological conditions for shale oil accumulation are proposed based on the unconventional geological theory of oil and gas. The shale rock system mainly developed interbedded formation of felsic shale, calcareous and dolomitic shale and carbonates; high quality hydrocarbon source rock formed in the stable and closed environment is the material base for shale oil enrichment; intergranular pores in analcite, intercrystalline pores in dolomite and interlayer micro-fractures make tight carbonate, calcareous and dolomitic shale and felsic shale effective reservoirs, with brittle mineral content of more than 70%; high abundance laminated shale rock in the lower section of Ek21 is rich in shale oil, with a total thickness of 70 m, burial depth between 2 800 to 4 200 m, an average oil saturation of 50%, a sweet spot area of 260 km2 and predicted resources of over 5×108 t. Therefore, this area is a key replacement domain for oil exploration in the Kongdian Formation of the Cangdong sag. At present, the KN9 vertical well has a daily oil production of 29.6 t after fracturing with a 2 mm choke. A breakthrough of continental shale oil exploration in a lacustrine basin is expected to be achieved by volume fracturing in horizontal wells. Key words: shale oil, fine grained deposits, horizontal well, volume fracturing, shale reservoir sweet spot, Paleogene Kongdian Formation, Cangdong sag, Bohai Bay Basin

Cangdong is a typical oil-rich sag in the Bohai Bay Basin, China. After more than 50 years of exploration and development, the Kong2 Member (the major hydrocarbon play in the sag) still has considerable residual oil and gas resource potential. To pursue replacement areas of oil and gas exploration and development, the basic geology of the entire Kong2 Member in Cangdong Sag as a unit has been reexamined, and the findings have been used to guide the secondary exploration deployment. In this study, the characteristics of sedimentary reservoirs, source rocks, and oil and gas distribution in the Kong2 Member have been systematically studied, and a sedimentary model of the ring belt-circle layer of the closed lake basin in the Kong2 Member of the Cangdong Sag, with three segments (high, middle, and low) on the profile, three ring belts (outer, middle, and inner) on the plane, and three circle layers (outer, middle, and inner) in space has been established. The ring belt and circle layer are jointly controlled by water-body differentiation in the closed lake basin, source-material supply, depositional accommodation space, and deposition base-level cycle, and they can be in round, oval, long strip, and irregular shapes. The outer ring (circle), located near the basin margin, mainly has delta-front subfacies conventional coarse-grained medium-thick sandstone and near-source structural and stratigraphic-lithologic reservoirs; the middle ring (circle), the transitional zone from the basin margin to the central basin, is dominated by fine sandstone, siltstone, and lacustrine carbonates of front delta subfacies, and it mainly contains isolated lithologic reservoirs and unconventional tight oil; the inner ring (circle) is the high-quality hydrocarbon source-rock development zone in the center of the closed lake basin, featuring a high abundance of shale, where the dolomite and siltstone of distal gravity flow right next to source rock, and fine-grained diamictite of the source reservoir in one area rich in tight oil, whereas the high-abundance shale of frequent source-reservoir interbeds is rich in shale oil. The strategy of oil and gas exploration deployment is to look for structural, stratigraphic-lithologic reservoirs in the outer circle (outside source), lithologic reservoirs in the middle circle (near source), and retained tight oil and shale oil in the inner ring (inside source). In recent years, major discoveries have been made in oil and gas exploration in the three circle layers of the Kong2 Member in the Cangdong Sag through drilling, especially in tight-oil exploration in the inner-circle layer: two sandstone sweet-spot intervals of greater than 60 m and three dolomite sweet-spot intervals of greater than 100 m have been confirmed. The maximum daily oil production of vertical wells after fracturing is up to 50 t; several hundred square kilometers of favorable exploration area has been delineated, with an estimated oil geologic resource of 100 million tons.

Based on systematic coring of 500 m of Kong 2 Member of the Paleogene Kongdian Formation in Cangdong sag of Bohai Bay Basin, identification and XRD (X-Ray Diffraction) analysis of over 1000 thin sections, a simplified method to quantitatively calculate contents of fine grained minerals with conventional logging data such as acoustic travel time (AC) and density log (DEN) has been proposed, and a quick lithologic identification “green mode” has been worked out in this study. By fitting the relationship between normalization of logging curves and mineral content measured by XRD, the mineral contents of sections or wells not cored can be calculated to identify lithology. With this method, several dolomite sweet spot intervals and one sandstone sweet spot interval have been found in the Kong 2 Member of Cangdong sag, where high production oil and gas flows have been tapped from drilled wells. The study shows that the dolomite is in band distribution and enriched in local parts of the study area. This method is applicable to lithologic identification of fine grained deposits in front delta-lake basin center, especially lithologic identification of mud and dolomite dominated fine grained deposits with low sand content of semi-deep, deep lake facies. Key words: fine grained deposits, lithologic identification, dolomite, tight oil, reservoir sweet spot, Paleogene Kongdian Formation, Cangdong sag, Bohai Bay Basin

Based on seismic, logging, formation testing, core and lab test data, this study analyzed the sequence division, facies features of deep water deposits and modes, development of large-scale gravity flow, reservoir physical properties and their main controlling factors, and proposed a classification standard and prediction method of favorable exploration areas in deep water area of the Bin1 oil layers of the lower sub-member of the first member of Paleogene Shahejie Formation in Banqiao-Qibei slope zone of Qikou sag, Bohai Bay Basin. The Bin1 oil layers can be divided into three fifth-order sequences, each less than 100 m thick; a set of gravity flow deposits were formed under deep water background in the slope zone, which contains sedimentary micro-facies such as main channel, distributary channel, channel margin, inter-channel mudstone, and turbidite sand sheet in areas without channels, and, in space, has inherited and constructive development features of multistages. It is a sedimentary sequence of fan delta – distal subaqueous fan – deep lake, and every distal subaqueous fan formed by gravity flow can be divided into inner-, middle- and outer fans. The cross-facies transported sands which are sourced from higher-sand-content major sands of delta front can form high quality reservoirs with an average porosity of 15.1% and geometric average permeability of 5.1×10−3 μm2. The main channel and distributary channel of distal subaqueous fan are the most favorable exploration zones. Key words: deep water deposit, slope zone, sandy debris flow, subaqueous fan, lithologic reservoir, Shahejie Formation, fault lake basin, Qikou sag, Bohai Bay Basin

Based on analysis of successive and whole cores over six hundred meters from the second Member of Kongdian Formation (Kong 2 Member) of fine-grained facies zone in central lake basin of Cangdong sag, ten thousands of systematic and joint analysis data, and the matching logging data, the sedimentary characteristics in the fine-grained facies zone is examined by means of traditional petroleum geology, sedimentology, and new theory and method of tight oil and gas generation. The Kong 2 Member is the sedimentation during the maximum lake flooding in the Kongdian Formation. Fine-grained sedimentation of half-deep lake to deep lake are widely distributed, the fine-grained feldspar-quartz contained sedimentary rock, fine-grained mixed sedimentary rock, and dolomite are developed, and the clay rock is poorly developed. The fine-grained rocks have these features as follows: more rock compositions, less advantageous minerals; more debris minerals, less clay minerals; more analcites, less pyrites; more brittle minerals, less quartz; more rock types, less oil shale; more tight reservoirs with less non-cracked reservoirs; more high-quality source rocks, less non-source rocks; more high-frequency cycle sediments, less single sediments. These understandings updated the former view that only mud shale source rock was dominantly developed in the closed continental lake. With the help of geologic research and matched engineering technologies, several exploration wells have produced industrial oil flows, showing a good prospect of tight oil exploration in fine-grained facies zones of continental lacustrine basins. Key words: fine-grained sediment, fine-grained facies, tight oil, geologic features, exploration prospect, Cangdong sag, Bohai Bay Basin