Search

The renewed interest in the reactivation of the defunct National Konongo Gold Mine located in the Ashanti Greenstone Belt, calls for a further probe into its geology and the associated mineral hosting structures to discover its mineralization potential. In order to achieve this, airborne magnetic, radiometric and electromagnetic datasets were interpreted to determine the potential gold hosting features in the studied area. The results show the area to consist of the metasediment, the metavolcanic, Tartwaian Formation and their associated granitoids. Results also show that the Tarkwaian sediments, observed largely in the north-eastern side of the site; widen out substantially and truncate in the south. The analysis of the structure lineaments using a rose diagram reveals three main tectonic structures trending in N-S, NNW-SSE, and third the structure trending in the NNE-SSW to NE-SW directions in the area. The dominant structures in the area, form 90% of all the delineated structures and trend in the NE-SW and NNE-SSW direction with the remaining 10% trending in the N-S and NNW-SSE. These structures are associated with the major shear and fracture zones located mainly at the contact between the basin sediments and volcanic belt and also associated with the Tarkwaian Formation. The mapped potential gold mineralization zones located mainly at the contact between the metasediment and the metavolcanic units of the Birimian Supergroup, as well as the Tarkwaian Formation, were mapped by integrating the structures, alteration zones as well as the complex dyke systems. This paper delineates the prominent geological structures with the potential of hosting economic gold mineralization in and around the Konongo Gold Mine.

Non-invasive geophysical investigation using magnetic gradiometry, magnetic susceptibility survey and electrical resistivity tomography (ERT) was carried out on the Sunyani Municipal Assembly (SMA) solid waste disposal (SWD) site. The study was aimed at delineating the physical boundaries and the area extent of the waste deposit, mapping the distribution of the waste at the site, detecting and delineating zones of leachate contamination and its preferential migration pathways beneath the waste deposit and its surroundings. The results of both magnetic susceptibility and gradiometric methods displayed in anomaly maps clearly delineated the physical boundaries of the waste deposit with an approximate area extent of 82,650 m2 that are characterised by high magnetic susceptibilities between 426 × 10−5 SI and 9890 × 10−5 SI. They also revealed high magnetic anomalies erratically distributed within the waste deposit attributable to its heterogeneous and uncontrolled nature. The high magnetic anomalies outside the designated waste boundaries were also attributed to indiscriminate deposition of the waste. Similarly, the ERT sections delineated and characterised zones of leachate contamination beneath the waste body and its close surroundings as well as pathways for leachate migration with low resistivity signatures up to 43.9 Ωm. In spite of the successes reported herein using the ERT, this research also revealed that the ERT is less effective in estimating the thickness of the waste deposit in unlined SWD sites due to leachate infiltration into the ground beneath it that masks the resistivities of the top level ground and makes it indistinguishable from the waste body.

In this paper, the southern Kibi-Winneba belt, which shares geological resemblance with the renowned Ashanti belt in Ghana has been investigated to delineate prospective zones of gold mineralization occurrences. The generation of a mineral prospectivity map (MPM) for the study area comprised the integration of nine (9) exploration layers obtained from geological, remote sensing and geophysical datasets based on the Fuzzy analytical hierarchy process (FAHP) approach and geographical information systems (GIS). The employability of the FAHP in the assignment of weight to the nine (9) evidential layers based on their comparative importance with respect to the mineral being sought (which is gold in this study) was carried out by experts in remote sensing and geophysical techniques for mineral exploration. The weights of the evidential layers were subsequently normalized and integrated to produce an MPM of gold deposits within the study area based on a fuzzy operator of γ = 0.9 in GIS. For an elaborate evaluation of the MPM, the concentration-area (C-A) fractal model was employed to classify the generated MPM to obtain 6 thresholds for the generation of a final MPM for the study area. Further evaluation of the MPM was carried out by the prediction-area (P-A) plot based on 15 locations of known gold occurrences, with results obtained predicting that 25% of the study area as prospective regions of gold deposits, within which 75% of the known gold occurrences have been delineated.

Physicochemical properties, nutrient concentrations, microbial properties and concentrations of heavy metals in water and sediments from the Owabi reservoir and its tributaries, namely Atafua, Sukobri and Owabi rivers as well as the outflow of the reservoir, were determined as indicators of the extent of pollution of the reservoir. The samples were collected in December 2015, which falls within the dry season in Ghana. Nutrient concentrations in water and sediments were within permissible limits. The heavy metals (Cu, Mn, Cd, Pb and Fe) in sediments were determined using X-ray fluorescence and that in water using flame atomic absorption spectrometer. Water from the reservoir and its feeder tributaries was heavily polluted with faecal coliforms, Escherichia coli and faecal enterococci. Physicochemical properties were within the World Health Organisation’s (WHO) permissible concentrations for drinking water except for turbidity, which was significantly higher (P

Study region: The 69 km2 Owabi catchment in Ghana. Study focus: The Soil-Water-Assessment-Tool (SWAT) was used to assess the hydro-climatic variability resulting from anthropogenic activities from 1986 to 2015. Specifically, the model simulated historic and projected stream-flow and water balance. Future stream-flow projections were modelled for three climate ensembles under three different representative concentration pathways (RCPs) for two land-use categories. New hydrological insights for the region: Initial results revealed that forest and topography played major role in water loss, whereas evapotranspiration and surface runoff were the dominant modulating processes. Monthly calibration/validation of the model yielded acceptable results with NSE, R2, PBIAS and RSR values of 0.66/0.67, 0.67/0.67, 8.2%/8.0% and 0.59/0.58 respectively. Uncertainty was fairly low and the model enveloped about 50% of the observed stream-flow. The RCP projections for all land use categories showed decreasing rainfall and streamflow trends. The model proved efficient in determining the catchment hydrology parameters and has potential to be used for further modelling of water quality and pollution to aid in effective water management. Keywords: Hydro-climate, Stream-flow, Water resource management, Climate change, SWAT model

Time-domain induced polarisation and magnetic data were acquired to map and characterise the decommissioned and un-engineered municipal solid waste disposal site of the Kwame Nkrumah University of Science and Technology, located in the Kumasi Metropolis of Ghana. In this survey, 13 induced polarisation profiles 500–800 m long and 26 magnetic profiles 400–800 m long were acquired. In addition, two boreholes were drilled to help in the interpretation of the geophysical data. The study was carried out with the aim of determining the risk posed by the waste deposit to the quality of the soil and the ground water system, which is the main potable water supply for the Secondary School, the University Teaching Hospital and the Veterinary School, situated within the catchment area of the site. Full-decay 2-D time-domain induced polarisation inversions in terms of Cole–Cole parameters were used for interpreting the induced polarisation data. The chargeability, resistivity and normalised chargeability distributions, together with the magnetic results, aided in a full characterisation of the site geology, the waste and the associated pollution plume. In particular, clear contrasts in resistivity and the polarisation parameters were found between the saprolite layer and the granitic bedrock, which are the main lithological units of the area. Furthermore, it was found that the Kwame Nkrumah University of Science and Technology waste deposit is characterised by a low-chargeability and low-resistivity signature and that the low-resistivity area spreads out from the waste deposit into the permeable saprolite layer, indicating the presence of a leachate plume. A fracture zone in the granitic bedrock beneath the waste deposit, which is a potential conduit for leachate contamination of the ground water system, was also identified. The study thus provides the information needed for assessing the future impact of the waste on the water quality in the area and for designing risk-mitigation actions.

The distribution, and ecological risks due to toxic metals in topsoils of an urban commercial centre of Kumasi metropolis were determined. Concentrations of heavy metals in the samples were initially screened using field portable X-ray fluorescence spectrometer prior to confirmation on an inductively coupled plasma-mass spectrometer. The results from the two instruments correlated well with high linearity (R2 > 0.70). Concentrations of metals were in the order: Fe (45246.15 mg/kg) > Mn (347.86 mg/kg) > Zn (176.40 mg/kg) > V (173.10 mg/kg) > Cr (125.12 mg/kg) > Pb (53.47 mg/kg) > Ni (43.16 mg/kg) > Cu (39.85 mg/kg) > As (4.59 mg/kg) > Sn (3.69 mg/kg) > Cd (0.46 mg/kg) > Hg (0.28 mg/kg). Multivariate and geostatistical analyses exploring various hazard indices such as geo-accumulation, contamination, pollution load and ecological risks all suggest contamination of the topsoils with toxic metals and that the contamination due to Pb, Cu, Ni, Cr and Zn is mainly derived from anthropogenic origins whereas, As, Hg, Mn, V, Sn and Cd contaminations are attributable mainly to geological and atmospheric depositions. Contamination factor (CF) suggests that the topsoils were considerably contaminated (CF 3–6) with Zn, moderately contaminated (CF 1–3) with Ni, Hg, V, Sn and Cd and least contaminated (CF

Due to the increase in students’ population over the years, the Kwame Nkrumah University of Science and Technology (KNUST), Kumasi, Ghana, and its surrounding communities have seen an increase in the number of beauty salons. The assessment of the quality of salon wastewater has received little attention, as a potential source of environmental and public health hazard, due to the lack of literature on this issue. The main aim of this study is to assess wastewater effluent characteristics in KNUST and its surrounding areas, in relation to its physicochemical and microbial parameters. A total of 48 wastewater samples were collected monthly in 250 L polystyrene bottles, over a two-month period from the KNUST and Ayigya, Ayeduase, and Bomso communities. Standard methods of American Public Health Association (APHA, 19th edition) were employed in the determination of the physicochemical parameters and microbial content of the wastewater samples. The results showed that all the sampling towns had mean chemical oxygen demand (COD; 60.04 ± 1.82 mg/L), biological oxygen demand (BOD; 30.03 ± 9.11 mg/L), dissolved oxygen (DO; 3.00 ± 0.53 mg/L), pH (9.55 ± 0.42), nitrate (5.42 ± 0.36 mg/L), phosphate (23.61 ± 0.16 mg/L), acidity (1.70 ± 0.01 mg/L), alkalinity (70.88 ± 2.59 mg/L), turbidity (20.29 ± 3.86 NTU), electrical conductivity (EC; 1404.89 ± 114.11 μm/S), and total dissolved solids (TDS; 1150.25 ± 262.10 mg/L) in the salon waste. In the case of bacterial levels, pathogenic bacteria such as fecal coliforms, Escherichia coli, Shigella dysenteriae, and Salmonella enterica were absent, while the levels of Staphylococcus aureus and Pseudomonas aeruginosa did not pose any health risk. The correlation matrix showed a significant positive correlation between and among pH, alkalinity, TDS, and turbidity ( P < 0.05). The results revealed that the wastewater collected from the salon effluents contain pollution indicator parameters such as EC, pH, PO43-, BOD, and turbidity, considerably higher than the tolerance limits recommended by the World Health Organization. The principal component analysis indicated that pH, alkalinity, acidity, COD, PO43-, S. aureus, P. aeruginosa, turbidity, TDS, EC, DO, and BOD were the most influential parameters to wastewater variations. Based on these characteristics, a call for a regular and persistent monitoring strategy by the relevant authorities is significant to ensure best practices with respect to the discharge of salon wastewater into the environment.