Search

The hydration of carbon–carbon triple bonds is an important and atom economic synthetic transformation. Herein, we report a mild and selective method for the catalytic Markovnikov hydration of (E)-aryl enynes to the corresponding enones, mediated through the bench-stable aminium salt, tris(4-bromophenyl)ammoniumyl hexachloroantimonate (TBPA). The chemoselective and diastereoselective method proceeds under neutral metal-free conditions, delivering excellent product yields from terminal and internal alkyne units. The synthesis of biologically important (E)-3-styrylisocoumarins, including a formal synthesis of the natural product achlisocoumarin III, demonstrates the utility of this novel transformation.

We have discovered and studied a tele-substitution reaction in a biologically important heterocyclic ring system. Conditions that favor the tele-substitution pathway were identified: the use of increased equivalents of the nucleophile or decreased equivalents of base or the use of softer nucleophiles, less polar solvents, and larger halogens on the electrophile. Using results from X-ray crystallographic and isotope labeling experiments, a mechanism for this unusual transformation is proposed. We focused on this triazolopyrazine as it is the core structure of the in vivo active antiplasmodium compounds of Series 4 of the Open Source Malaria consortium.

A versatile method for the synthesis of enantioenriched N-H sulfoximines is reported. The approach stems from the organomagnesium-mediated ring opening of novel cyclic sulfonimidate templates. The reactions proceed in high yield and with excellent stereofidelity with alkyl, aryl, and heteroaryl Grignard reagents. The chiral auxiliary is readily removed from the resultant sulfoximines via an unusual oxidative debenzylation protocol that utilizes molecular oxygen as the terminal oxidant. This provides a general strategy for the synthesis of highly enantioenriched N-H sulfoximines.

A strategy to create organic molecules with high degrees of radical spin multiplicity is reported in which molecular design is correlated with the behaviour of radical anions in a series of BODIPY dyads. Upon reduction of each BODIPY moiety radical anions are formed which are shown to have different spin multiplicities by electron paramagnetic resonance (EPR) spectroscopy and distinct profiles in their cyclic voltammograms and UV-visible spectra. The relationship between structure and multiplicity is demonstrated showing that the balance between singlet, biradical or triplet states in the dyads depends on relative orientation and connectivity of the BODIPY groups. The strategy is applied to the synthesis of a BODIPY triad which adopts an unusual quartet state upon reduction to its radical trianion.

The effect of chelate cooperativity on the binding of several ditopic anions to two tetrathiourea macrocycles has been analysed in competitive solvent mixtures (H2O : DMSO 1 : 9 v/v). The semi-flexible receptors bind dicarboxylates with high affinity dependent on the length and flexibility of the guest. Chemical double mutant cycle (DMC) analysis allowed the chelate cooperativity effects to be measured in detail and revealed both positive and negative cooperativity effects which were dependent on guest size, flexibility and spacer interactions between guest and macrocycle. 1H NMR and crystallographic studies confirmed the macrocycle hosts are adaptable, changing conformation to match their pore size to a selected guest.

Phenylthiosemicarbazones (PTSCs) are proton-coupled anion transporters with pH-switchable behaviour known to be regulated by an imine protonation equilibrium. Previously, chloride/nitrate exchange by PTSCs was found to be inactive at pH 7.2 due to locking of the thiourea anion binding site by an intramolecular hydrogen bond, and switched ON upon imine protonation at pH 4.5. The rate-determining process of the pH switch, however, was not examined. We here develop a new series of PTSCs and demonstrate their conformational behaviour by X-ray crystallographic analysis and pH-switchable anion transport properties by liposomal assays. We report the surprising finding that the protonated PTSCs are extremely selective for halides over oxyanions in membrane transport. Owing to the high chloride over nitrate selectivity, the pH-dependent chloride/nitrate exchange of PTSCs originates from the rate-limiting nitrate transport process being inhibited at neutral pH.

A two-coordinate Fe(II) m-terphenyl complex acts as a precatalyst for the hydroamination of isocyanates, affording urea and biuret derivatives, with product selectivity accomplished via modificatio...

A series of symmetrically bis-4-methoxybenzyl (4MB) N-substituted 1,4-diketopyrrolo[3,4-c]pyrrole (DPP) derivatives have been synthesized. The 4MB unit makes the DPP core soluble, and shows subtle modification of up to 0.2 eV in ground and excited states of the core when compared with related alkyl derivatives. Absorption and emission spectroscopy, as well as electrochemical and computational methods have been employed to prove the importance of the peripheral aryl units on the donor/ acceptor properties of the molecules. The 4MB products are highly fluorescent (quantum yields approaching 100 % in solution), with a unique distribution of frontier states shown by spectroelectrochemistry. The solid-state fluorescence correlates with the X-ray crystal structures of the compounds, a Stokes shift of approximately 80 nm is seen for two of the compounds. The frontier energy levels show that this subtle substitutional change could be of future use in molecular energy level tailoring in these, and related, materials for organic (opto)electronics.

A series of eight bis(thiosemicarbazone) ligands and 16 of their respective copper(II) and zinc(II) complexes containing a combination of hydrogen, methyl, pyridyl, phenyl, and/or ethyl substituents at the diimine position of the ligand backbone were synthesized and characterized. The objective of this study was to identify the structure-activity relationships within a series of analogues with different substituents at the diimine position of the backbone and at the terminal N atom. The Cu(II) complexes Cu(GTSM

Artificial receptors that recognise anionic species vianoncovalent interactions have a wide range of biomedical, industrial and environmental applications. A major challenge in this area of research is to achieve high affinity and selective anion binding in aqueous media. So far, only a few examples of receptors capable of strong (> 105M-1) anion binding in solutions containing > 50% water are available and none show selectivity for chloride. We report here the discovery of a D4h-symmetric fluorinated tetraurea macrocycle that fulfils this function owing to its unique self-assembly properties. The macrocycle has a strong tendency to self-associate into columnar aggregates viaintermolecular hydrogen bonds and aromatic stacking. In aqueous solutions, macrocycle aggregation generates hydrophobic and size-selective binding pockets favourable for hydrogen bonding with chloride. As a result, micromolar affinity and highly selective chloride binding has been achieved with this simple small molecule (MW < 700) in 60 vol% water/acetonitrile.

The synthesis of functionalized 1-tetralones by the rhodium(i)-catalyzed reaction of alkynyl malonates with arylboronic acids is described. These arylative cyclizations proceed via an alkenyl-to-aryl 1,4-Rh(i) migration as a key step. Preliminary results of an enantioselective variant of these reactions are also presented.

We have constructed a continuous flow oscillatory baffled reactor (CF-OBR) equipped with a homogeneous and controllable microwave applicator in an entirely novel design. This affords a new route to chemical production incorporating many of the principles of process intensification and allows, for the first time, investigation of the synergistic benefits of microwave heating and CF-OBRs such as; faster and continuous processing; improved product properties and purity; improved control over the processing parameters; and reduced energy consumption. The process is demonstrated by the production of a metal-organic framework (MOF), HKUST-1, a highly porous crystalline material with potential applications in gas storage and separation, catalysis, and sensing. Our reactor enabled the production of HKUST-1 at the 97.42 g/h scale, with a space time yield (STY) of 6.32 × 105 kg/m3/day and surface area production rate (SAPR) of 1.12 × 1012 m2/m3/day. This represents the highest reported STY and fastest reported synthesis (2.2 s) for any MOF produced via any method to-date and is an improvement on the current SAPR for HKUST-1 by two orders of magnitude owing to the superior porosity exhibited by HKUST-1 produced using our rig (Langmuir surface area of 1772 compared to 600 m2/g).

NO2, SO2 and CO2 are major air pollutants causing significant environmental and health problems. Metal–organic frameworks (MOFs), in particular [Al2(OH)2(C16O8H6)](H2O)6 (trivial names: NOTT-300/MFM-300(Al)), have shown great promise for capturing these gases. However MOF syntheses often involve toxic solvents and long durations which are inherently energy intensive, an environmental burden, and have serious safety risks. There is a pressing need to develop environmentally-friendly routes to MOFs that require less energy and implement safer solvents particularly when considering scale-up beyond the laboratory for industrial application. We report the rapid synthesis of MFM-300(Al) in aqueous conditions and 10 minutes using microwave heating. This is the fastest reported synthesis of MFM-300(Al) to date with a 99.77% reduction in reaction time compared to the current reported 3-day conventionally heated route. The microwave synthesized sub-micron crystalline material exhibits gas uptake capacities of 8.8 mmol g−1 at 273 K and 1.0 bar for CO2, 8.5 mmol g−1 at 298 K and 0.17 bar for SO2, and 1.9 mmol g−1 at 298 K and 0.01 bar for NO2. These are 26%, 70%, and 90% greater for CO2, SO2, and NO2, respectively, when compared to previously reported MFM-300(Al) materials produced via a 3-day conventionally heated route demonstrating the production of high quality materials in a fraction of the time with enhanced gas properties. Crucially, this offers an opportunity to move from batch to continuous processing owing to reduced reaction times underpinned by targeted heating.

Functionalization of boron-dipyrrin (BODIPY) chromophores with pyridine (1) or pyrimidine (2) substituents affords molecules with strong absorbance in the visible spectrum which are also highly fluorescent in solution, in thin films and as powders. Reaction of either 1, a bipyridyl ligand, or 2, a bipyrimidinyl ligand, with CuI in MeCN affords a one-dimensional coordination polymer (3) or a three-dimensional coordination polymer (4), respectively. Although the free ligands, 1 and 2, exhibit fluorescence in the solid-state, metal coordination in the CuI coordination polymers, 3 and 4, leads to quenching despite the retention of the BODIPY core.

Respiring mitochondria establish a proton gradient across the mitochondrial inner membrane (MIM) that is used to generate ATP. Protein-independent mitochondrial uncouplers collapse the proton gradient and disrupt ATP production by shuttling protons back across the MIM in a protonophoric cycle. Continued cycling relies on the formation of MIM-permeable anionic species that can return to the intermembrane space after deprotonation in the mitochondrial matrix. Previously described protonophores contain acidic groups that are part of delocalised π-systems that provide large surfaces for charge delocalisation and facilitate anion permeation across the MIM. Here we present a new class of protonophoric uncoupler based on aryl-urea substituted fatty acids in which an acidic group and a π-system are separated by a long alkyl chain. The aryl-urea group in these molecules acts as a synthetic anion receptor that forms intermolecular hydrogen bonds with the fatty acid carboxylate after deprotonation. Dispersal of the negative charge across the aryl-urea system produces lipophilic dimeric complexes that can permeate the MIM and facilitate repeated cycling. Substitution of the aryl-urea group with lipophilic electron withdrawing groups is critical to complex lipophilicity and uncoupling activity. The aryl-urea substituted fatty acids represent the first biological example of mitochondrial uncoupling mediated by the interaction of a fatty acid and an anion receptor moiety, via self-assembly., A new mitochondrial uncoupler that forms membrane permeable dimers through interactions of remote acidic and anion receptor groups.

Diaminomethylenemalononitriles (DMMs) and diaminomethyleneindanediones (DMIs) are dual H-bond donors that have previously been used as organocatalysts, but their anion binding ability has not been investigated. We report the synthesis of both alkyl- and aryl-substituted DMMs and DMIs, together with a comparison of their anion binding ability with that of the analogous thioureas. The DMMs display affinity for monovalent anions, with similar anion binding affinities observed to that of the thioureas in acetonitrile, albeit with differing trends for the N,N'-dialkyl versus N,N'-diaryl compounds. In contrast, the DMIs do not bind to monovalent anions under similar conditions as a result of conformational locking through the formation of intramolecular H-bonds. This can be overcome upon addition of sulfate ions, and binding of sulfate is enhanced in a more competitive solvent (DMSO).

The solid state supramolecular interactions of diketopyrrolopyrrole derivatives (DPPs) and their correlation with thin film optical properties are of particular interest because of the applications of these materials in organic electronics. In this study, we report the single crystal X-ray structures of several phenyl DPP derivatives, containing 4-methoxyphenyl, 4-hydroxyphenyl and 4-((tetrahydro-2H-pyran-2-yl)oxy)phenyl aryl units, and show how subtle changes in the substituent chains at side or end positions of the chromophore can lead to very different packing. They are compared to their phenyl counterpart to explore how the nature of both the alkyl chain and the aryl unit influence the optical properties that have been measured in solid and solution states. Importantly, for the three families of N-substituted compounds studied, the structures are changed by the conformation of the molecules and are apparently dominated by crystal packing effects where edge-to-face interactions are favoured rather than π stacking, with only one of the compounds showing a flat form, promoted by intermolecular contacts between the aromatic regions. It is therefore possible that the twist between DPP and phenyl units in crystals of DPPs results from edge-to-face interactions (rather than steric interactions between the N-substituent and the protons attached to the aromatic ring) that might be overcome in more extended structures. Hydrogen bonding dominates the packing to generate chains of DPP units for phenol derivatives. Remote bulky groups do affect the core conformation. The emission of the materials as thin films is dominated by local effects in the packing of the materials that are unique for each case as the structures are distinct from one another. Charge mobility (as calculated from the crystal structures) is not favoured because of twisted conformations and large displacement, but the sometimes high emission and large Stokes shift could make the materials interesting for other purposes, such as light emitters.

The effect of para-substitution upon the structural and electronic properties of a series of m-terphenyl lithium complexes [R–Ar#–Li]2 (R = t-Bu 1, SiMe32, H 3, Cl 4, CF35; where R–Ar# = 2,6-{2,6-Xyl}2-4-R-C6H2 and 2,6-Xyl = 2,6-Me2C6H3) has been investigated. X-ray crystallography reveals the complexes to be structurally similar, with little variation in C–M–C bond lengths and angles across the series. However, in-depth NMR spectroscopic studies reveal notable electronic differences, showing a linear correlation between the 7Li{1H} NMR chemical shifts of the para-substituted complexes and their Hammett constants. The flanking methyl protons exhibit a similar electronic shift in the 1H NMR spectra, which has been rationalised by the presence of through-space Li⋯H interactions, as evidenced by two-dimensional 7Li–1H heteronuclear Overhauser spectroscopy (HOESY). In both cases, electron-withdrawing substituents are found to cause an upfield peak shift. A computational analysis is employed to account for these trends., We acknowledge the EPSRC [grant number EP/R004064/1], the Leverhulme Trust [grant number RPG-2014-317], and the University of Nottingham for financial support of this research. We also thank the University of Nottingham Analytical Services Team for elemental analyses, mass spectrometry, and NMR spectroscopy measurements. We are also grateful for access to the University of Nottingham's Augusta High Performance Computing service. AMT is grateful for support from the European Research Council under H2020/ERC Consolidator Grant “topDFT” (Grant No. 772259).

Water-soluble complexes are desirable for the aqueous detoxification of cyanide. Molybdenum complexes with α-amino acid and disulfide ligands with the formula K[(L)Mo2O2(μ-S)2(S2)] (L = leu (1), met (2), thr (3), and ser (4)) were synthesized in a reaction of [(DMF)3MoO(μ-S)2(S2)] with deprotonated α-amino acids; leu, met, thr, and ser are the carboxylate anions of l-leucine, l-methionine, l-threonine, and l-serine, respectively. Potassium salts of α-amino acids (leu (1a), met (2a), thr (3a), and ser (4a)) were prepared as precursors for complexes 1-4, respectively, by employing a nonaqueous synthesis route. The ligand exchange reaction of [Mo2O2(μ-S)2(DMF)6](I)2 with deprotonated α-amino acids afforded bis-α-amino acid complexes, [(L)2Mo2O2(μ-S)2] (6-8). A tris-α-amino acid complex, [(leu)2Mo2O2(μ-S)2(μ-leu + H)] (5; leu + H is the carboxylate anion of l-leucine with the amine protonated), formed in the reaction with leucine. 5 crystallized from methanol with a third weakly bonded leucine as a bridging bidentate carboxylate. An adduct of 8 with SCN- coordinated, 9, crystallized and was structurally characterized. Complexes 1-4 are air stable and highly water-soluble chiral molecules. Cytotoxicity studies in the A549 cell line gave IC50 values that range from 80 to 400 μM. Cyclic voltammetry traces of 1-8 show solvent-dependent irreversible electrochemical behavior. Complexes 1-4 demonstrated the ability to catalyze the reaction of thiosulfate and cyanide in vitro to exhaustively transform cyanide to thiocyanate in less than 1 h.

Reversible structural transformations of porous coordination frameworks in response to external stimuli such as light, electrical potential, guest inclusion or pressure, amongst others, have been the subject of intense interest for applications in sensing, switching and molecular separations. Here we report a coordination framework based on an electroactive tetrathiafulvalene exhibiting a reversible single crystal-to-single crystal double [2 + 2] photocyclisation, leading to profound differences in the electrochemical, optical and mechanical properties of the material upon light irradiation. Electrochemical and in situ spectroelectrochemical measurements, in combination with in situ light-irradiated Raman spectroscopy and atomic force microscopy, revealed the variable mechanical properties of the framework that were supported using Density Functional Theory calculations. The reversible structural transformation points towards a plethora of potential applications for coordination frameworks in photo-mechanical and photoelectrochemical devices, such as light-driven actuators and photo-valves for targeted drug delivery., Porous coordination frameworks that undergo reversible structural transformations are promising for sensing, switching and separations. Here, the authors report an electroactive framework that exhibits a reversible single crystal-to-single crystal double [2+2] photocyclisation, leading to property changes.

Anion transporters have shown potential application as anti-cancer agents that function by disrupting homeostasis and triggering cell death. In this research article we report switchable anion transport by gold complexes of anion transporters that are ‘switched on’ in situ in the presence of the reducing agent GSH by decomplexation of gold. GSH is found in higher concentrations in tumours than in healthy tissue and hence this approach offers a strategy to target these systems to tumours.

A magnesium complex (1) featuring a bidentate aminopyridinato ligand is a remarkably selective catalyst for the dehydrocoupling of amine‐boranes. This reaction proceeds to completion with low catalyst loadings (1 mol %) under mild conditions (60 °C), exceeding previously reported s‐block systems in terms of selectivity, rate, and turnover number (TON). Mechanistic studies by in situ NMR analysis reveals the reaction to be first order in both catalyst and substrate. A reaction mechanism is proposed to account for these findings, with the high TON of the catalyst attributed to the bidentate nature of the ligand, which allows for reversible deprotonation of the substrate and regeneration of 1 as a stable resting state.

Four new mononuclear complexes, [MnIV(L1)2] (1), [CoII(HL1)2] (2), [NiII(HL1)2] (3), and [NiII(HL2)2] (4), with ligands H2L1 (2-hydroxyethylimino)methylnaphthol) and H2L2 (3-hydroxy propylimino)methylnaphthol) have been synthesized, characterized, and their catecholase activities have been studied. Single-crystal X-ray diffraction study shows that 1 crystallizes in P43212 space group and adopts an octahedral geometry in meridional fashion, whereas 4 with a square planar geometry crystallizes in P21/n space group. The catecholase activity has been investigated in acetonitrile by UV-Vis spectrophotometric technique. The kinetic study revealed that 1 has a moderate catecholase activity (kcat = 812 h−1), whereas 2–4 are inactive. Electronic structure of 1 and 4 has been established by theoretical calculation. Structures of both complexes have been optimized by DFT. Experimental electronic spectra of the complexes have been corroborated by TD-DFT analysis.

Designing porous materials which can selectively adsorb CO2 or CH4 is an important environmental and industrial goal which requires an understanding of the host–guest interactions involved at the atomic scale. Metal–organic polyhedra (MOPs) showing permanent porosity upon desolvation are rarely observed. We report a family of MOPs (Cu-1a, Cu-1b, Cu-2), which derive their permanent porosity from cavities between packed cages rather than from within the polyhedra. Thus, for Cu-1a, the void fraction outside the cages totals 56% with only 2% within. The relative stabilities of these MOP structures are rationalized by considering their weak nondirectional packing interactions using Hirshfeld surface analyses. The exceptional stability of Cu-1a enables a detailed structural investigation into the adsorption of CO2 and CH4 using in situ X-ray and neutron diffraction, coupled with DFT calculations. The primary binding sites for adsorbed CO2 and CH4 in Cu-1a are found to be the open metal sites and pockets defined by the faces of phenyl rings. More importantly, the structural analysis of a hydrated sample of Cu-1a reveals a strong hydrogen bond between the adsorbed CO2 molecule and the Cu(II)-bound water molecule, shedding light on previous empirical and theoretical observations that partial hydration of metal−organic framework (MOF) materials containing open metal sites increases their uptake of CO2. The results of the crystallographic study on MOP–gas binding have been rationalized using DFT calculations, yielding individual binding energies for the various pore environments of Cu-1a., We report a family of metal−organic polyhedra (MOP), which derive their permanent porosity from cavities between packed cages rather than from within the polyhedra. The relative stabilities of these MOP structures are rationalized by considering their weak nondirectional packing interactions using Hirshfeld surface analysis. A detailed structural investigation into the adsorption of CO2 and CH4 is reported using in situ X-ray and neutron diffraction, coupled with DFT calculations.

Functionalization of 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) chromophores at the 2,6-positions with iodo substituents and morpholino-substituted &alpha, methyl groups affords molecules with strong absorbance in the visible spectrum. The effect of such substitution on the solid-state arrangements, absorption, fluorescence and electronic properties of these dye molecules is reported. The spectroscopic and spectroelectrochemical measurements display intense absorptions in the UV-visible spectrum with bathochromic shifts, in comparison to unfunctionalized BODIPY, and a positive shift in redox potentials due to functionalisation of the BODIPY core. Halogen bonds are observed in the solid-state structures of both halogenated BODIPY species, which in one case leads to the formation of an unusual halogen bonded framework.

Perylene diimides (PDIs) are promising candidates for n-type semiconductor materials and, thus, for use in organic electronics. Thionation of the imide moiety provides an efficient strategy to control the donor–acceptor gap of these types of compounds, although the degree and selectivity of thionation can be hard to achieve. Through the design of a sterically encumbered PDI–phenothiazine dyad, a previously unattained geminal thionation pattern has been realized, providing the first example of a perylene-monoimide-monothioimide. The electrochemical and solid-state structural properties of this uniquely thionated dyad are reported and compared to those of the nonthionated parent molecule. It is found that thionation enhances the electron affinity of the PDI core, affecting electrochemical and spectroelectochemcial behavior of the dyad without significantly affecting the solid-state packing of the molecules.

The biological significance of sp3-rich synthetic scaffolds with natural product-like features yet distinct global frameworks is being increasingly recognised in medicinal chemistry and biochemistry. Taking inspiration from the vast array of bioactive, bridged alkaloids, we report the synthesis of unique, densely functionalised tricyclic scaffolds based on nitrogen-bridged, octahydrobenzofurans and octahydroindoles. These heterocycle-rich frameworks were assembled by a one-pot, two-step bridge-forming reductive amination process, which was shown to proceed via caged, heteroadamantane intermediates that thermodynamically drive an exo–endo epimerisation, enabling intramolecular azaMichael addition over the concave face of the fused bicyclic precursors. In addition to evaluating the scope of this aza bridge-forming reaction, further stereochemical complexity was introduced by subsequent diastereoselective ketone reductions and other manipulations. Finally, strategic diversity points (amino, carboxy) were decorated with common medicinal chemistry fragments, providing a set of exemplar derivatives with Lipinski compliant physicochemical properties.

An intriguing hypothesis that latrunculin A, a well-known natural product, might have undergone transformation into the unprecedented thiopyrone CTP-431 upon long-term storage in methanol is advanced. Thus opening of the hemiacetal of latrunculin A, followed by E1CB elimination, and dehydration would give a polyene that could undergo intramolecular Diels-Alder reaction, followed by methanolysis of the thiazolidinone ring and ring closure by intramolecular thiol addition to an enone. Experimental evidence that the novel thiazolidinone to thiopyrone rearrangement can occur is presented.The marine sponge Cacospongia mycofijiensis, found in the ocean surrounding Fiji, is a source of several polyketide natural products with interesting biological properties,1 including the tubulin binding macrolide fijianolide B (also known as laulimalide),2,3 the HIF1 signal inhibitor mycothiazole,4,5 and the macrolide latrunculins (Figure 1).6 The thiazolidinone-containing latruculins are of mixed polyketide synthesis (PKS) and non-ribosomal peptide synthesis (NRPS) origin, and latrunculin A 1 disrupts microfilament assembly to such an extent that it is the most widely used chemical tool to study actin binding.

A series of highly substituted tetrahydrofurans (THFs), decorated with modifiable 2-aryl, 3-carboxy and 4-amino substituents, has been prepared for biological evaluation within the European Lead Factory. Diastereoselective reductive amination of pre-functionalised 4-oxofurans, readily prepared from cinnamate esters via oxa-Michael/Dieckmann annulation, provided the requisite THF cores on gram scale with three contiguous stereocentres, including full substitution at C-3. In a second series, a pyrrolidine ring was fused to the same oxofuran scaffold via an intramolecular reductive amination, inverting the configuration at C-4 relative to the other ring substituents. The resulting compounds, which displayed desirable physical properties as lead-like scaffolds, were derivatised into a small library of 24 compounds, demonstrating their ability to serve as starting points for drug discovery. Ultimately, this chemistry enabled the preparation of 1948 THF-containing compounds for inclusion in the Joint European Compound Library.

The development of synthetic analogs of the active sites of [NiFe] hydrogenases remains challenging, and, in spite of the number of complexes featuring a [NiFe] center, those featuring CO and CN- ligands at the Fe center are under-represented. We report herein the synthesis of three bimetallic [NiFe] complexes [Ni(N2S2)Fe(CO)2(CN)2], [Ni(S4)Fe(CO)2(CN)2], and [Ni(N2S3)Fe(CO)2(CN)2] that each contain a Ni center that bridges through two thiolato S donors to a {Fe(CO)2(CN)2} unit. X-ray crystallographic studies on [Ni(N2S3)Fe(CO)2(CN)2], supported by DFT calculations, are consistent with a solid-state structure containing distinct molecules in the singlet (S = 0) and triplet (S = 1) states. Each cluster exhibits irreversible reduction processes between -1.45 and -1.67 V vs Fc+/Fc and [Ni(N2S3)Fe(CO)2(CN)2] possesses a reversible oxidation process at 0.17 V vs Fc+/Fc. Spectroelectrochemical infrared (IR) and electron paramagnetic resonance (EPR) studies, supported by density functional theory (DFT) calculations, are consistent with a NiIIIFeII formulation for [Ni(N2S3)Fe(CO)2(CN)2]+. The singly occupied molecular orbital (SOMO) in [Ni(N2S3)Fe(CO)2(CN)2]+ is based on Ni 3dz2 and 3p S with the S contributions deriving principally from the apical S-donor. The nature of the SOMO corresponds to that proposed for the Ni-C state of the [NiFe] hydrogenases for which a NiIIIFeII formulation has also been proposed. A comparison of the experimental structures, and the electrochemical and spectroscopic properties of [Ni(N2S3)Fe(CO)2(CN)2] and its [Ni(N2S3)] precursor, together with calculations on the oxidized [Ni(N2S3)Fe(CO)2(CN)2]+ and [Ni(N2S3)]+ forms suggests that the binding of the {Fe(CO)(CN)2} unit to the {Ni(CysS)4} center at the active site of the [NiFe] hydrogenases suppresses thiolate-based oxidative chemistry involving the bridging thiolate S donors. This is in addition to the role of the Fe center in modulating the redox potential and geometry and supporting a bridging hydride species between the Ni and Fe centers in the Ni-C state.

The structural characterization of single crystals of di-4-pyridyl-substituted 3,4,9,10-perylenetetracarboxylic diimide reveals a surprising triple helical arrangement. The intermolecular interactions that lead to such an arrangement are investigated by Hirshfeld surface analysis and indicate that the supramolecular structure arises due to a combination of C–H···O interactions and π–π stacking interactions between adjacent perylene diimide (PDI) species. The interplay of these interactions leads to the formation of a tubular structure enclosed by the triple helix of PDI molecules. In contrast, the analogous phenyl-substituted molecule forms a simple one-dimensional stack of PDI molecules which is also unusual in that the perylene core adopts an essentially planar arrangement despite bay substitution.

Group 1 salts containing carbazolido NNN pincer ligands are precatalysts for the dehydrogenation of Me2NH·BH3. NMR monitoring and DOSY studies show a heavy dependence on the metal and solvent, allowing in some cases selective formation of dehydrogenation products consistent with hydrogen liberation.

Two- and three-coordinate manganese m-terphenyl complexes are precatalysts for the dehydrogenation of dimethylamine-borane (Me2NH·BH3) affording one equivalent of molecular hydrogen and half an equivalent of [Me2N–BH2]2. Experimental studies into the nature of the catalyst indicate that small changes in the coordination environment give rise to significant differences in the reaction mechanism, occurring through a homogeneous mechanism for two-coordinate precatalysts, whilst for the three-coordinate species a heterogeneous mechanism takes place where nanoparticles are responsible for the catalysis.

A chiral rhodium complex catalyzes the highly enantioselective coupling of arylboronic acids, 1,3‐enynes, and imines to give homoallylic sulfamates. The key step is the generation of allylrhodium(I) species by alkenyl‐to‐allyl 1,4‐rhodium(I) migration.

Simple enantioselective synthesis of 6,6-disubstituted pentafulvenes bearing chiral pendant hydroxy groups are attained by cascade reactivity using commercially available proline-based organocatalysts. Condensation of cyclopentadiene with the acetyl function of a 1,2-formylacetophenone, followed by cyclization of a resulting fulvene-stabilized carbanion with the formyl group, generates bicyclic chiral alcohols with initial er values up to 94:6. Exceptional enantio-enrichment of the resultant alcohols results upon crystallization – even near racemic samples spontaneously de-racemize. This enables new families of substituted cyclopentadienes that are both enantiomerically and diastereomerically pure to be rapidly attained.

A simple and efficient asymmetric synthesis of novel sp3 -rich pyrrolidine chemical scaffolds over five steps starting from simple ketones is described. Key steps involve the use of tert-butanesulfinamide as a chiral auxiliary to perform an asymmetric Tsuji-Trost allylation, with subsequent cross-metathesis with an acrylate ester and reduction of the sulfinimine/cyclisation of the resulting amine giving the pyrrolidine scaffolds in high yields and diastereoselectivites. By removing the chiral auxiliary and functionalising the ester group, the resulting scaffold core can be further derivatised.

Enantioselective nickel‐catalyzed arylative cyclizations of substrates containing a Z‐allylic phosphate tethered to an alkyne are described. These reactions give multisubstituted chiral aza‐ and carbocycles, and are initiated by the addition of an arylboronic acid to the alkyne, followed by cyclization of the resulting alkenylnickel species onto the allylic phosphate. The reversible E/Z isomerization of the alkenylnickel species is essential for the success of the reactions.

Alkenyl‐to‐allyl 1,4‐rhodium(I) migration enables the generation of nucleophilic allylrhodium(I) species by remote C−H activation. This new mode of reactivity was employed in the diastereoselective reaction of arylboron reagents with substrates containing a 1,3‐enyne tethered to a ketone, to give products containing three contiguous stereocenters. The products can be obtained in high enantioselectivities using a chiral sulfur‐alkene ligand.

© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim The first transition metal catalyzed hydrophosphination of isocyanates is presented. The use of low-coordinate iron(II) precatalysts leads to an unprecedented catalytic double insertion of isocyanates into the P−H bond of diphenylphosphine to yield phosphinodicarboxamides [Ph2PC(=O)N(R)C(=O)N(H)R], a new family of derivatized organophosphorus compounds. This remarkable result can be attributed to the low-coordinate nature of the iron(II) centers whose inherent electron deficiency enables a Lewis-acid mechanism in which a combination of the steric pocket of the metal center and substrate size determines the reaction products and regioselectivity.

Functionalization of the aromatic core of naphthalene diimide (NDI) chromophores with morpholine substituents leads to molecules with strong absorbance in the visible spectrum. The shift of absorption maxima to lower energy is determined not only by the degree of substitution but also by the relative conformation and orientation of the tertiary amine with respect to the plane of the NDI.

The phosphinimine, trimethylsilyl-substituted BIPM ligand [BIPM = bis(iminophosphorano)methanide] has been used to stabilise CH(Ph2PNSiMe3)2MgFe(η5-C5H5)(CO)2 (1), which is a structurally authenticated complex exhibiting a direct, unsupported bond between an alkaline earth metal and a transition metal. The FTIR-measured carbonyl stretching frequencies for this complex suggest that there is a polarisation of charge from the transition metal fragment to the magnesium centre. The presence of a polar metal-metal bond in 1 is confirmed by DFT calculations, which suggest that the Mg−Fe bond is predominantly ionic in nature.

The structurally unique polyazole antibiotic goadsporin contains six heteroaromatic oxazole and thiazole rings integrated into a linear array of amino acids that also contains two dehydroalanine residues. An efficient total synthesis of goadsporin is reported in which the key steps are the use of rhodium(II)-catalyzed reactions of diazocarbonyl compounds to generate the four oxazole rings, which demonstrates the power of rhodium carbene chemistry in organic chemical synthesis.

In the present work, two new copper complexes 3a and 3b with a Cu4O4 cubane core are reported. Both complexes are obtained by means of the in situ conversion of the imine functionality of Schiff's base ligands 1a [(E)-4-chloro-2-((thiazol-2-ylimino)methyl)phenol] and 1b [(E)-4-bromo-2-((thiazol-2-ylimino)methyl)phenol] into amino alcohols 2a (4-chloro-2-(hydroxy(thiazol-2-ylamino)methyl)phenol) and 2b (4-bromo-2-(hydroxy(thiazol-2-ylamino)methyl)phenol), respectively. The ligand transformation may be metal assisted and the generated ligands show an interesting mode of coordination in which the alkoxo-O atom binds in a μ3-manner connecting simultaneously three copper centers and forming a Cu4O4 cubane core. The first analysis of single crystal X-ray diffraction studies reveals that both molecules possess a [4 + 2] cubane-type core, and low temperature magnetic measurements show antiferromagnetic behaviour, in agreement with DFT calculations. However, the best fit and DFT calculations point out three pairs of coupling constants, more coherent with a [2 + 2 + 2] situation, in accordance with the fine analysis of structural data. Finally, phenoxazinone synthase activity has been measured for both molecules, finding kcat = 86.3 h−1 for the chloride derivative copper(II) complex in methanol, whereas the bromide derivative copper(II) complex displays kcat = 3.4026 × 102 h−1 and 10.289 × 102 h−1 in methanol and DMSO, respectively.

A new square tetranuclear copper complex of formula Cu4(LH)4·4DMF with the dinucleating amide ligand N4,N5-bis(4-fluorophenyl)-1H-imidazole-4,5-dicarboxamide (LH3) is reported herein. This ligand and the complex have been characterized by elemental analysis, FTIR, NMR, mass and UV-visible spectroscopy, as well as magnetic and electrochemical measurements. The single crystal X-ray diffraction study showed each Cu centre in a distorted square pyramidal environment, the square plane being formed by the extended coordination of two sets (N,N and N,O) of donor atoms from pairs of different ligands. The Cu4 unit has a Ci symmetry and crystallises in the P[1 with combining macron] space group in between DMF layers. The electronic spectrum of the complex exhibits a d–d transition at 676 nm. The complex also displays mild catecholase activity in DMF solution by using 3,5-di-tert-butylcatechol as substrate. Variable temperature magnetic measurements reveal an antiferromagnetic interaction between the copper centres with two different coupling constants of −143.4 and −169.0 cm−1. DFT calculations made on a single Cu4 unit from the crystal structure corroborated the antiferromagnetic coupling, the spin density of the lower-energy broken-symmetry state being consistent with an alternating +−+− singlet state operating at low temperature.

When Ni(NO3)2∙6H2O and N,N’-di(4-pyridyl)-1,4,5,8-naphthalenetetracarboxydiimide (DPNDI) are reacted, a one-dimensional coordination polymer (1) is formed. However, reaction with either terephthalic acid (2) or 2,6-naphthalenedicarboxylic acid (3) affords two-dimensional, pillared metal-organic frameworks. 2 and 3 containing rectangular voids of different dimensions which are dictated by the carboxylate ligand and the arrangement of the [M(k2-O2NO)]2(μ2-O2CR)2] secondary building unit (SBU) that forms the nodes of the framework. The role of SBU geometry, intermolecular face-to-face π–π and lone pair–π interactions involving the DPNDI ligands are discussed.

A magnesium complex (1) featuring a bidentate aminopyridinato ligand is a remarkably selective catalyst for the dehydrocoupling of amine-boranes. This reaction proceeds to completion with low catalyst loadings (1 mol %) under mild conditions (60 °C), exceeding previously reported s-block systems in terms of selectivity, rate, and turnover number (TON). Mechanistic studies by in situ NMR analysis reveals the reaction to be first order in both catalyst and substrate. A reaction mechanism is proposed to account for these findings, with the high TON of the catalyst attributed to the bidentate nature of the ligand, which allows for reversible deprotonation of the substrate and regeneration of 1 as a stable resting state.

We report a series of six isoreticular metal–organic frameworks (MOFs) for selective gas adsorption, specifically for selective adsorption of CO2 and C2H2., In order to develop new porous materials for applications in gas separations such as natural gas upgrading, landfill gas processing and acetylene purification it is vital to gain understanding of host–substrate interactions at a molecular level. Herein we report a series of six isoreticular metal–organic frameworks (MOFs) for selective gas adsorption. These materials do not incorporate open metal sites and thus provide an excellent platform to investigate the effect of the incorporation of ligand functionality via amide and alkyne groups on substrate binding. By reducing the length of the linker in our previously reported MFM-136, we report much improved CO2/CH4 (50 : 50) and CO2/N2 (15 : 85) selectivity values of 20.2 and 65.4, respectively (1 bar and 273 K), in the new amide-decorated MOF, MFM-126. The CO2 separation performance of MFM-126 has been confirmed by dynamic breakthrough experiments. In situ inelastic neutron scattering and synchrotron FT-IR microspectroscopy were employed to elucidate dynamic interactions of adsorbed CO2 molecules within MFM-126. Upon changing the functionality to an alkyne group in MFM-127, the CO2 uptake decreases but the C2H2 uptake increases by 68%, leading to excellent C2H2/CO2 and C2H2/CH4 selectivities of 3.7 and 21.2, respectively. Neutron powder diffraction enabled the direct observation of the preferred binding domains in MFM-126 and MFM-127, and, to the best of our knowledge, we report the first example of acetylene binding to an alkyne moiety in a porous material, with over 50% of the acetylene observed within MFM-127 displaying interactions (