Search

Surface deformation modes, such as wrinkling, creasing, and cracking, enable a plethora of surface morphologies under mechanical loading, which have been widely exploited to provide flexibility and stretchability to electronic devices. As each phenomenon offers a distinct set of potential advantages, controlling the types and spatial locations of deformation modes is key for their successful application. In this study, we demonstrate a method to simultaneously harness multiple surface deformation modes-wrinkles, creases, and cracks-in patterned multilayer films. The wrinkling of metal-coated stiff patterned films provides flexibility and stretchability, while the reversible formation of creases in the intervening regions of the bare elastomer is used to template the formation of patterned cracks in the metal. While conventional cracks can be difficult to precisely control, the patterned cracks demonstrated here remain straight over long distances and show tunable lateral spacings from hundreds of micrometers to centimeters. Finally, the reversible opening and closing of these cracks under mechanical loading provides mechanically gated electrical switches with small and tunable critical switching strains of 0.05-0.18 and high on/off ratios of >107, enabling the preparation of mechanical NAND and NOR logic gates each composed of multiple patterned switches on a single elastomer surface.

This study aims to understand the fundamental mechanical relationship between polypropylene (PP)-gels and solid PPs without solvent through mechanical and thermal analyses, by which the mechanical similarities between molten PPs and PP gels were found, leading to the reliable estimate of the mechanical properties of semi-crystalline gels. The gelation of syndiotactic and isotactic polypropylenes (sPP and iPP) was found when PPs were dissolved in 1,2,3,4-tetrahydronaphthalene (tetralin). Interestingly, it was found that the storage modulus of sPP-gel became higher than that of iPP-gel at low PP concentration (&lt, ~40 wt%). The result was distinctly different from the result of neat solid PPs (without solvent), where the modulus of solid sPP is generally significantly lower than that of solid iPP. Such inversion behavior in the mechanical property of semi-crystalline gels had not been reported and discussed before. By further investigation of the storage moduli of neat sPP and iPP, it was found that the storage modulus of sPP became higher than that of iPP above the melting points of PP, which was similar to the behavior of the storage moduli observed in the diluted PP-gels. Such similarity between PP-gels and PP melts was also observed within iPP samples with different molecular weights.

Polymer networks are complex systems consisting of molecular components. Whereas the properties of the individual components are typically well understood by most chemists, translating that chemical insight into polymer networks themselves is limited by the statistical and poorly defined nature of network structures. As a result, it is challenging, if not currently impossible, to extrapolate from the molecular behavior of components to the full range of performance and properties of the entire polymer network. Polymer networks therefore present an unrealized, important, and interdisciplinary opportunity to exert molecular-level, chemical control on material macroscopic properties. A barrier to sophisticated molecular approaches to polymer networks is that the techniques for characterizing the molecular structure of networks are often unfamiliar to many scientists. Here, we present a critical overview of the current characterization techniques available to understand the relation between the molecular properties and the resulting performance and behavior of polymer networks, in the absence of added fillers. We highlight the methods available to characterize the chemistry and molecular-level properties of individual polymer strands and junctions, the gelation process by which strands form networks, the structure of the resulting network, and the dynamics and mechanics of the final material. The purpose is not to serve as a detailed manual for conducting these measurements but rather to unify the underlying principles, point out remaining challenges, and provide a concise overview by which chemists can plan characterization strategies that suit their research objectives. Because polymer networks cannot often be sufficiently characterized with a single method, strategic combinations of multiple techniques are typically required for their molecular characterization.

Buckling instabilities-such as wrinkling and creasing-of micropatterned elastic surfaces play important roles in applications, including flexible electronics and microfluidics. In many cases, the spatial dimensions associated with the imposed pattern can compete with the natural length scale of the surface instabilities (e.g., the wrinkle wavelength), leading to a rich array of surface buckling behaviors. In this paper, we consider elastic bilayers consisting of a spatially patterned stiff film supported on a continuous and planar soft substrate. Through a combination of experimental and computational analyses, we find that three surface instability modes-wrinkling, Euler buckling, and rigid rotation-are observed for the stiff material patterns, depending on the in-plane dimensions of the film compared to the natural wrinkle wavelength, while the intervening soft regions undergo a creasing instability. The interplay between these instabilities leads to a variety of surface structures as a function of the pattern geometry and applied compressive strain, in many cases yielding contact between neighboring stiff material elements because of the formation of creases in the gaps between them.