Search

The application of pH-sensitive dye molecules onto textile materials is a promising method for the development of sensor materials. Ten commonly used pH-indicators, namely sulfonphthaleine dyes, are applied onto polyamide 6 using two distinct methods: conventional dyeing of fabrics and dye-doping of nanofibres. The influence of the substituents of each dye on their interaction with polyamide, as well as the difference between both application methods is investigated. For the conventionally dyed fabrics, halogen substituents are needed to result in a pH-sensitive fabric. This can be traced back to halogen bonding and is supported by theoretical simulations. Dye-doped nanofibrous non-wovens show significant dye leaching, which can be understood based on the very acidic electrospinning solution. The use of a complexing agent improves the leaching properties, especially for dyes containing four bromine substituents. These findings indicate the importance of halogen substituents on sulfonphthaleines for further research in the development of pH-sensitive sensors.

Here, we introduce a novel concept for the fabrication of colored materials with significantly reduced dye leaching through covalent immobilization of the desired dye using plasma-generated surface radicals. This plasma dye coating (PDC) procedure immobilizes a pre-adsorbed layer of a dye functionalized with a radical sensitive group on the surface through radical addition caused by a short plasma treatment. The non-specific nature of the plasma-generated surface radicals allows for a wide variety of dyes including azobenzenes and sulfonphthaleins, functionalized with radical sensitive groups to avoid significant dye degradation, to be combined with various materials including PP, PE, PA6, cellulose, and PTFE. The wide applicability, low consumption of dye, relatively short procedure time, and the possibility of continuous PDC using an atmospheric plasma reactor make this procedure economically interesting for various applications ranging from simple coloring of a material to the fabrication of chromic sensor fabrics as demonstrated by preparing a range of halochromic materials., Dye coating techniques for colored materials are often cost intensive or cause degradation of the material during processing. Here the authors demonstrate a fast, scalable and cost efficient plasma dye coating procedure, which allows for covalent immobilization of dye molecules on different polymer surfaces.

Nanofibrous membranes based on polycaprolactone (PCL) have a large potential for use in biomedical applications but are limited by the hydrophobicity of PCL. Blend electrospinning of PCL with other biomedical suited materials, such as gelatin (Gt) allows for the design of better and new materials. This study investigates the possibility of blend electrospinning PCL/Gt nanofibrous membranes which can be used to design a range of novel materials better suited for biomedical applications. The electrospinnability and stability of PCL/Gt blend nanofibers from a non-toxic acid solvent system are investigated. The solvent system developed in this work allows good electrospinnable emulsions for the whole PCL/Gt composition range. Uniform bead-free nanofibers can easily be produced, and the resulting fiber diameter can be tuned by altering the total polymer concentration. Addition of small amounts of water stabilizes the electrospinning emulsions, allowing the electrospinning of large and homogeneous nanofibrous structures over a prolonged period. The resulting blend nanofibrous membranes are analyzed for their composition, morphology, and homogeneity. Cold-gelling experiments on these novel membranes show the possibility of obtaining water-stable PCL/Gt nanofibrous membranes, as well as nanostructured hydrogels reinforced with nanofibers. Both material classes provide a high potential for designing new material applications.

Gelatin nanofibrous structures, characterized by high specific surface area and high porosity, have been widely researched for biomedical and food applications. The present paper researches the potential of electrospinning to produce a nanofibrous cold-gelling (or instant) gelatin product. Our results show that gelatin nanofibers are cold-water-soluble due to their high surface-to-volume ratio, facilitating easy water penetration and dissolution, and this for several gelatin types. Additionally, fast gelation after dissolution in cold water indicates that the electrospinning process does not significantly reduce the gelatin molecular weight, nor compromise triple helix formation. These conclusions were supported by thorough investigation of the internal gelatin structure, using a new approach based on modulated temperature scanning calorimetry. Oscillation rheology revealed that the nanofiber-based gels have moduli comparable to powder-based gels. Gelatin nanofibers can thus be used as instant gelatin product, without the drawbacks of traditional amorphous instant gelatins such as sensitivity to moisture, low wettability and low modulus of the cold gel. Using the approach reported here, every electrospinnable, but non-cold-water-soluble gelatin can be transformed into a cold-water-soluble variant, regardless of the type or modification. Electrospinning can thus offer enormous flexibility in materials selection, enabling the production of cold gels loaded with temperature-sensitive components, UV-cross-linkable cold gels, etc. (C) 2016 Elsevier Ltd. All rights reserved.

Colorimetric sensors for monitoring and visual reporting of acidic environments both in water and air are highly valuable in various fields, such as safety and technical textiles. Until now sol-gel-based colorimetric sensors are usually nonflexible bulk glass or thin-film sensors. Large-area, flexible sensors usable in strong acidic environments are not available. Therefore, in this study organically modified silicon oxide nanofibrous membranes are produced by combining electrospinning and sol-gel technology. Two pH-indicator dyes are immobilized in the nanofibrous membranes: methyl yellow via doping, methyl red via both doping, and covalent bonding. This resulted in sensor materials with a fast response time and high sensitivity for pH-change in water. The covalent bond between dye and the sol-gel network showed to be essential to obtain a reusable pH-sensor in aqueous environment. Also a high sensitivity is obtained for sensing of HCl and NH3 vapors, including a memory function allowing visual read-out up to 20 min after exposure. These fast and reversible, large-area flexible nanofibrous colorimetric sensors are highly interesting for use in multiple applications such as protective clothing and equipment. Moreover, the sensitivity to biogenic amines is demonstrated, offering potential for control and monitoring of food quality.