Search

Solution-processed metal oxide (MO) thin films have been extensively studied for use in thin-film transistors (TFTs) due to their high optical transparency, simplicity of fabrication methods, and high electron mobility. Here, we report, for the first time, the improvement of the electronic properties of solution-processed indium oxide (InOx) films by the subsequent addition of an organic p-type semiconductor material, here 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene), yielding organic-inorganic hybrid TFTs. The addition of TIPS-pentacene not only improves the electron mobility by enhancing the charge carrier percolation pathways but also improves the electronic and temporal stability of the IDS(VG) characteristics as well as reduces the number of required spin-coating steps of the InOx precursor solution. Very interestingly, the introduction of 10 nm TIPS-pentacene films on top of 15 nm InOx layers allows the fabrication of either enhancement- or depletion-mode devices with only minimal changes to the fabrication process. Specifically, we find that when the TIPS-pentacene layer is added on top of the source/drain electrodes, resulting in devices with embedded source/drain electrodes [embedded electrode TFTs (EETFTs)], the devices exhibit an enhancement-mode behavior with an average mobility (μ) of 6.4 cm2 V-1 s-1, a source-drain current ratio (Ion/Ioff) of around 105, and a near-zero threshold voltage (VTH). When on the other hand the TIPS-pentacene layer is added before the source-drain electrodes, i.e., in top-contact electrode TFTs (TCETFTs), a very clear depletion mode behavior is observed with an average μ of 6.3 cm2 V-1 s-1, an Ion/Ioff ratio of over 105, and a VTH of -80.3 V. Furthermore, a logic inverter is fabricated combining the enhancement (EETFTs)- and depletion (TCETFTs)-mode transistors, which shows a potential for the construction of organic-inorganic hybrid electronics and circuits.

Blending organic molecules to tune their energy levels is currently being investigated as an approach to engineer the bulk and interfacial optoelectronic properties of organic semiconductors. It has been proven that the ionization energy and electron affinity can be equally shifted in the same direction by electrostatic effects controlled by blending similar halogenated derivatives with different energetics. Here we show that the energy gap of organic semiconductors can also be tuned by blending. We use oligothiophenes with different numbers of thiophene rings as an example and investigate their structure and electronic properties. Photoelectron spectroscopy and inverse photoelectron spectroscopy show tunability of the single-particle gap, with the optical gaps showing similar, but smaller, effects. Theoretical analysis shows that this tuning is mainly caused by a change in the dielectric constant with blend ratio. Further studies will explore the practical impact of this energy-level engineering strategy for optoelectronic devices.

Organic electronics is the technology enabling truly flexible electronic devices. However, despite continuous improvements in the charge-carrier mobility, devices used for digital circuits based on organic field-effect transistors (OFETs) have still not achieved a commercial breakthrough. A substantial hurdle to the realization of effective digital circuitry is the proper control of the threshold voltage Vth. Previous approaches include doping or self-assembled monolayers to provide the threshold voltage control. However, while self-assembled monolayers-modified OFETs often do not show the level of reproducibility which is required in digital circuit engineering, direct doping of the channel material results in a poor on/off ratio leading to unfavorable power dissipation. Furthermore, direct doping of the channel material in organic semiconductors could cause the formation of trap states impeding the charge-carrier transport. Employing the concept of modulation-doped field-effect transistors (MODFETs), which is well established in inorganic electronics, the semiconductor-dopant interaction is significantly reduced, thereby solving the above-described problems. Here, we present the concept of an organic semiconductor MODFET which is composed of an organic-organic heterostructure between a highly doped wide-energy-gap material and an undoped narrow-energy-gap material. The effectiveness of charge transfer across the interface is controlled by the doping concentration and thickness of an undoped buffer layer. A complete picture of the energy landscape of this heterostructure is drawn using impedance spectroscopy and ultraviolet photoelectron spectroscopy. Furthermore, we analyze the effect of the dopant density on the charge-carrier transport properties. The incorporation of these heterostructures into OFETs enables a precise adjustment of the threshold voltage by using the modulation doping concept.

Organic solar cells usually utilise a heterojunction between electron-donating (D) and electron-accepting (A) materials to split excitons into charges. However, the use of D-A blends intrinsically limits the photovoltage and introduces morphological instability. Here, we demonstrate that polycrystalline films of chemically identical molecules offer a promising alternative and show that photoexcitation of α-sexithiophene (α-6T) films results in efficient charge generation. This leads to α-6T based homojunction organic solar cells with an external quantum efficiency reaching up to 44% and an open-circuit voltage of 1.61 V. Morphological, photoemission, and modelling studies show that boundaries between α-6T crystalline domains with different orientations generate an electrostatic landscape with an interfacial energy offset of 0.4 eV, which promotes the formation of hybridised exciton/charge-transfer states at the interface, dissociating efficiently into free charges. Our findings open new avenues for organic solar cell design where material energetics are tuned through molecular electrostatic engineering and mesoscale structural control., Though single-material organic solar cells are attractive for next-generation photovoltaic technologies, designing new materials with ideal properties remains a challenge. Here, the authors report the use of orientation-dependent molecular electrostatics to realise efficient homojunction devices.

Rubrene single crystal domains with hundreds of micrometers size fully covering different substrates are achieved by thermal annealing of evaporated amorphous thin films with the help of a thin glassy underlayer. The sufficiently large energy level offset of the underlayer material and rubrene enables high performance staggered bottom gate rubrene crystalline transistors with maximum field-effect linear mobility over 5 cm2V−1s−1 (μAvg = 4.35 ± 0.76 cm2V−1s−1) for short channel devices of 20 μm, comparable to high quality rubrene bulk single crystals. Moreover, since molecular dopants up to several mole percent can be incorporated into the single crystals with a minimal disturbance of the lattice, the contact resistance of the transistors is significantly reduced to around 1 kOhm.cm by contact doping via adlayer epitaxy of p-type doped rubrene. Our results pave the way for novel high-performance organic electronics using crystalline active materials with mass-production compatible deposition techniques.