Search

Borylated poly(fluorene-benzothiadiazoles) (PF8-BT) are π-conjugated polymers (CPs) with deep-red/near-infrared (NIR) absorption and emission profiles suitable for in vivo optical imaging. A fully ...

1‐Boraphenalenes have been synthesized by reaction of BBr3 with 1‐(aryl‐ethynyl)naphthalenes, 1‐ethynylnaphthalene, and 1‐(pent‐1‐yn‐1‐yl)naphthalene and they can be selectively functionalized at boron or carbon to form bench‐stable products. All of these 1‐boraphenalenes have LUMOs localized on the planar C12B core that are closely comparable in character to isoelectronic phenalenyl cations. In contrast to the comparable LUMOs, the aromatic stabilization of the C5B ring in 1‐boraphenalenes is dramatically lower than the C6 rings in phenalenyl cations. This is due to the occupied orbitals of π symmetry being less delocalised in the 1‐boraphenalenes.

A series of Bn-PAHs has been prepared by functionalisation of a B1-PAH, leading to the first only boron doped B3-PAH to the best of our knowledge. These Bn-PAHs represent the first three members of a series of {B-Mes} fused oligo-naphthalenes and trends in key properties of this series have been elucidated.

Starting from simple alkynes, sequential borylative cyclisation/electrophilic C–H borylation represents a simple modular route to novel B-doped PAHs., Heteroatom doping into polyaromatic hydrocarbons (PAHs) is a powerful approach for modifying key physical properties, however, there are extremely few modular routes that enable facile formation of B-, B2- and B,N-(specifically not containing direct B–N bonds) doped PAHs despite the growing importance of these materials. Sequential, one pot borylative cyclisation/intramolecular electrophilic C–H borylation of naphthyl-alkynes provides a simple new route to access novel B-, B,N- and B2-doped (PAHs). The initial products, dihydronaphthalene/dihydroquinoline B-mesityl PAHs, were reacted with [Ph3C][BF4]/pyridyl base to form the oxidised B-, and B,N-doped PAHs. However, for B-triisopropylphenyl (Trip) PAH congeners oxidation has to be performed prior to Trip installation due to preferential oxidation of an isopropylaryl moiety to the styrene. This alternative sequence enables access to Trip-B-PAHs and to structurally constrained B and B2-PAHs. Analysis of the solid state structures and optoelectronic properties of these PAHs confirm that frontier orbital energies, extended packing structures, Stokes shift and quantum yields all can be rationally modified using this methodology. The simplicity of this synthetic approach makes it a powerful tool for rapidly generating novel bench stable boron doped PAHs, which is important for facilitating further structure–property relationship studies and the wider utilisation of these materials in optoelectronic applications.

Benzoselenadiazole and benzotriazole directed electrophilic borylation using BCl3 results in the C–H functionalization of an adjacent aromatic unit and produces fused boracycles. Subsequent arylation at boron afforded air and moisture stable products displaying large bathochromic shifts and significantly reduced LUMO energy levels. OLEDs fabricated containing borylated benzoselenadiazole derivatives showed emission centered at 723 nm in the near infra-red region of the spectrum.

Inter-/intra-molecular electrophilic C–H borylation of C4-substituted indoles enables the formation of fused polycyclic aromatic structures containing triarylborane and N-heterocyclic units. These compounds are B–(C)n–N isosteres of carbocyclic PAHs that do not contain B–N bonds and comparison of one pair of BN/CC isosteres reveals that different resonance structures dominate. These compounds are highly sensitive to protodeboronation, of both the chloroborane intermediates and the mesityl protected products, which results in low isolated yields of the latter. Protodeboronation can be utilised productively for a C–H directed, C–H electrophilic borylation to make a previously unknown pinacol boronate ester by selective protodeboronation of the chloroborane intermediate. Intermolecular and double intramolecular electrophilic C–H borylation of a C4-substituted indole leads to a more highly fused structure containing two boracycles which represents a B–(C)n–N analogue of the unknown carbon isostere indeno[1,7ab]perylene.

The addition of AlCl3 to four-coordinate boranes of the general formula (C–N-chelate)BCl2 results in halide abstraction and formation of three-coordinate borenium cations of the general formula [(C–N-chelate)BCl]+. The latter react with both arylstannanes and arylsilanes by boro-destannylation and -desilylation, respectively, to form arylated boranes. Catalytic quantities of AlCl3 were sufficient to effect high-yielding arylation of (C–N-chelate)BCl2. Boro-destannylation is more rapid than boro-desilylation and leads to double arylation at the boron center, whereas in reactions with arylsilanes either single or double arylation occurs dependent on the nucleophilicity of the arylsilane and on the electrophilicity of the borenium cation. The electrophilicity of the borenium cation derived from 2-phenylpyridine was greater than that of the benzothiadiazole analogues, enabling the boro-desilyation of less nucleophilic silanes and the direct electrophilic borylation of 2-methylthiophene.

Post-polymerization modification of the donor–acceptor polymer, poly(9,9-dioctylfluorene-alt-benzothiadiazole), PF8-BT, by electrophilic C–H borylation is a simple method to introduce controllable quantities of near-infrared (near-IR) emitting chromophore units into the backbone of a conjugated polymer. The highly stable borylated unit possesses a significantly lower LUMO energy than the pristine polymer resulting in a reduction in the band gap of the polymer by up to 0.63 eV and a red shift in emission of more than 150 nm. Extensively borylated polymers absorb strongly in the deep red/near-IR and are highly emissive in the near-IR region of the spectrum in solution and solid state. Photoluminescence quantum yield (PLQY) values are extremely high in the solid state for materials with emission maxima ≥ 700 nm with PLQY values of 44% at 700 nm and 11% at 757 nm for PF8-BT with different borylation levels. This high brightness enables efficient solution processed near-IR emitting OLEDs to be fabricated and highly emissive borylated polymer loaded conjugated polymer nanoparticles (CPNPs) to be prepared. The latter are bright, photostable, low toxicity bioimaging agents that in phantom mouse studies show higher signal to background ratios for emission at 820 nm than the ubiquitous near-IR emissive bioimaging agent indocyanine green. This methodology represents a general approach for the post-polymerization functionalization of donor–acceptor polymers to reduce the band gap as confirmed by the C–H borylation of poly((9,9-dioctylfluorene)-2,7-diyl-alt-[4,7-bis(3-hexylthien-5-yl)-2,1,3-benzothiadiazole]-2c,2cc-diyl) (PF8TBT) resulting in a red shift in emission of >150 nm, thereby shifting the emission maximum to 810 nm.

Fused and ladder type benzothiadiazole-arylamine donor-acceptor C,N-chelated boron complexes were synthesized through direct electrophilic C-H borylation. The frontier molecular orbital energy levels of the borylated materials then could be modulated through variation of the exocyclic boron substituents by transmetallation with different diarylzinc reagents. The borylated materials possessed low band-gaps and low LUMO energy levels with a number of examples also showing significant absorbance > 700 nm; however, low photoluminescence quantum yields were found for all these borylated compounds.

Electrophilic borylation using BCl3 and benzothiadiazole to direct the C–H functionalisation of an adjacent aromatic unit produces fused boracyclic materials with minimally changed HOMO energies but significantly reduced LUMO energies., Electrophilic borylation using BCl3 and benzothiadiazole to direct the C–H functionalisation of an adjacent aromatic unit produces fused boracyclic materials with minimally changed HOMO energy levels but significantly reduced LUMO energy levels. In situ alkylation and arylation at boron using Al(alkyl)3 or Zn(aryl)2 is facile and affords boracycles that possess excellent stability towards protic solvents, including water, and display large bathochromic shifts leading to far red/NIR emission in the solid state with quantum yields of up to 34%. Solution fabricated OLEDs with far red/NIR electroluminescence are reported with EQEs > 0.4%.