Search

This paper introduces a novel potential-resolved paper-based biosensor for simultaneous detection of multiple microRNAs (miRNAs) (taking miRNA-155 and miRNA-126 as examples) based on the bipolar electrode (BPE) electrochemiluminescence (ECL) strategy. The proposed multiple-channel paper-based sensing microfluidic platform was prepared by wax-printing technology, screen-printing method, and in situ Au nanoparticles (AuNPs) growth to form hydrophilic areas, hydrophobic boundaries, waterproof electronic bridge, driving electrode regions, and parallel bipolar electrode regions. CdTe quantum dots (QDs)-H2 and Au@g-C3N4 nanosheets (NSs)-DNA1 were used as dual electrochemiluminescence signal probes, and carboxylated Fe3O4 magnetic nanoparticles existed as carriers. CdTe QDs-H2/S2O82- and Au@g-C3N4 NSs-DNA1/S2O82- could exhibit two strong and stable ECL emissions at a drive voltage of 9 and 12 V, respectively, which can be used as effective potential-resolved signal tags. In addition, the proposed three-dimensional (3D) DNA nanomachine model and the target miRNA cycle strategy were used to achieve double amplification of electrochemiluminescence intensity. More importantly, the combination of the bipolar electrode system and the potential-resolved multitarget electrochemiluminescence method can greatly reduce the spatial interference between substances. The prepared ECL biosensor showed a favorable linear response for the detection of miRNA-155 and miRNA-126 with relatively low detection limits of 5.7 and 4.2 fM, respectively. With excellent sensitivity, the strategy may provide an efficient method for clinical application, especially in detection of trace multiple targets.

Lightweight yet strong paper with high toughness is desirable especially for impact protection. Herein we demonstrated electrically conductive and mechanically robust paper (AP/PB-GP) made of reduced graphene oxide via interfacial crosslinking with 1-aminopyrene (AP) and 1-pyrenebutyrat (PB) small molecules. The AP/PB-GP with thickness of over ten micrometer delivers a record-high toughness (∼69.67 ± 15.3 MJ m−3 in average), simultaneously with superior strength (close to 1 GPa), allowing an impressive specific penetration energy absorption (∼0.17 MJ kg−1) at high impact velocities when used for ballistic impact protection. Detailed interfacial and structural analysis reveals that the reinforcement is synergistically determined by π-π interaction and H-bonding linkage between adjacent graphene lamellae. Especially, the defective pores within the graphene platelets benefit the favorable adsorption of the pyrene-containing molecules, which imperatively maximizes the interfacial binding, facilitating deflecting crack and plastic deformation under loading. Density functional theory simulation suggests that the coupling between the polar functional groups, e.g., −COOH, at the edges of graphene platelets and −NH2 and −COOH of AP/PB are critical to the formation of hydrogen bonding network.

Neotame is an artificial sweetener with increasing consumption in recent years, excessive intake of it may bring potential health risk. In this work, a rapid method was developed to detect neotame in instant grain beverages, which was based on surface-enhanced Raman scattering (SERS) technique and filter paper-based silver nanoparticles (AgNPs@FP) substrates. The designed substrate exhibits good SERS activity with an enhancement factor of 105 because of the synergistic effect of the concentrated silver nanoparticles and filter paper. Meanwhile, the stability and repeatability of this fabricated substrate have been investigated with the relative standard deviation of 6.1%. In addition, it shows an excellent linear relationship (R 2 = 0.997) between the SERS signal and the logarithm concentration of neotame with a wide concentration range (0.05–5 g/kg) in the quantitative analysis. The limit of detection of neotame can be as low as 0.01 g/kg in instant grain beverages, which is below the maximum allowable addition level for neotame in instant grain beverages set in China (GB2760-2014, 0.16 g/kg). The proposed method has great potential for the identification and quantification of neotame in food safety applications with high sensitivity.

Tuberculosis (TB), one of the deadliest infectious diseases, is caused by Mycobacterium tuberculosis (MTB) and remains a public health problem nowadays. Conventional MTB DNA detection methods require sophisticated infrastructure and well-trained personnel, which leads to increasing complexity and high cost for diagnostics and limits their wide accessibility in low-resource settings. To address these issues, we have developed a low-cost photothermal biosensing method for the quantitative genetic detection of pathogens such as MTB DNA on a paper hybrid device using a thermometer. First, DNA capture probes were simply immobilized on paper through a one-step surface modification process. After DNA sandwich hybridization, oligonucleotide-functionalized gold nanoparticles (AuNPs) were introduced on paper and then catalyzed the oxidation reaction of 3,3',5,5'-tetramethylbenzidine (TMB). The produced oxidized TMB, acting as a strong photothermal agent, was used for the photothermal biosensing of MTB DNA under 808 nm laser irradiation. Under optimal conditions, the on-chip quantitative detection of the target DNA was readily achieved using an inexpensive thermometer as a signal recorder. This method does not require any expensive analytical instrumentation but can achieve higher sensitivity and there are no color interference issues, compared to conventional colorimetric methods. The method was further validated by detecting genomic DNA with high specificity. To the best of our knowledge, this is the first photothermal biosensing strategy for quantitative nucleic acid analysis on microfluidics using a thermometer, which brings fresh inspirations on the development of simple, low-cost, and miniaturized photothermal diagnostic platforms for quantitative detection of a variety of diseases at the point of care.

The growing need for reliable analytical tools to perform measurements at the point-of-need has prompted the development of novel sensors that are low cost, portable, sensitive, easy to use, and capable of multiplexed analysis. Miniaturization of the sensors into microfluidic platforms has become a promising approach to achieve these self-contained sensors. However, traditional microfluidics often require relatively expensive and complicated pumping mechanisms that increase the cost and limit the portability of the sensors. From a material perspective, paper is an attractive substrate for constructing point-of-need sensors because of its affordability, vast availability, and self-pumping ability, particularly when combined with electrochemical detection. In this mini-review, we discuss various strategies to achieve multiplexing or simultaneous detection of multiple analytes in electrochemical paper-based devices and provide a brief guide on selecting the detection strategy based on the electrochemical property of the analytes.

A novel nacre-like flame-retardant paper based on graphene oxide (GO), and phytic acid (PTA) is fabricated via evaporation-induced self-assembly. This facile method is time saving and low energy consuming. A facile approach is proposed to improve thermal oxidative stability of GO paper by in situ phosphorus doping during flame exposure. Then fire-alarm system is designed based on the high-temperature thermal reduction characteristic of GO. The GO paper functionalized with PTA (GO-PTA) can provide ultrasensitive, reliable and longtime fire early-warning signal. Fire alarm can be triggered at approximately 0.50 s when GO-PTA samples are attacked by fire. Phosphorus atoms are in situ doped into graphene layers during fire exposure, endowing GO-PTA paper with outstanding thermal oxidative stability, and thus alarm duration time of GO is greatly improved. The work develops advanced fire detection and early-warning sensors that provide reliable and continuous signals, which provide more available time for fire evacuation.

This study demonstrates a method for patterning paper-based microfluidic devices. An octadecyltrichlorosilane (OTS) solution is used to coat a chromatography paper to make it hydrophobic. A low-temperature (~ 32.9 °C) atmospheric-pressure dielectric-barrier-discharge jet with a shadow mask is then used to pattern hydrophilic stripes on the OTS-coated hydrophobic paper. In this manner, 1-mm-wide hydrophilic stripes are patterned successfully. Liquids are demonstrated to be transported and mixed in the hydrophilic stripes. Water contact angle measurement, X-ray photoelectron spectroscopy, surface profiler, optical emission spectroscopy, and scanning electron microscopy are used to characterize effect of pattering.

In this paper hemicellulose was separated by using 1-ethyl-3-methylimidazolium acetate (EmimAc, an ionic liquid) -water mixtures from a paper grade market bleached hardwood kraft pulp to produce dissolving pulp. Pure EmimAc dissolves pulp fibers completely in 30 min at ambient temperatures. By adding water (as an antisolvent to EmimAc system) the cellulose dissolution decreases and by optimizing the conditions, hemicellulose is largely removed while cellulose remains as the solid residue (dissolving pulp). At optimal conditions: molar ratio of water to EmimAc of 2, 60 °C, an alpha-cellulose content of 92.2%, with a high yield (78 wt%) was obtained. The viscosity of the solvent mixture decreases by increasing water to EmimAc molar ratio, which improves the mobility of ions, thus, facilitating their penetration into pores and lumens of the fibers during the dissolution process. Cellulose purity increases and purified cellulose yield decreases with the increases in temperature and water content (up to 2 wt%) in the mixture. This study implies that the optimal EmimAc/water mixture is an effective system to separate hemicellulose from hemicellulose/cellulose matrix.

Simultaneous enhancement in water flux and removal efficiency during the filtration process remains a big challenge for separation membranes. The porous structure of the filter paper can provide many channels for water transportation, but the separation performance is generally poor. The purpose of this study is to develop a new kind of filter paper consisting of ultralong hydroxyapatite (HAP) nanowires, cellulose fibers (CFs) and double metal oxide (LDO) nanosheets, and to achieve the simultaneous enhancement of both water flux and removal efficiency for high-performance dye separation. In this work, a novel kind of LDO/HAP/CF nanocomposite filter paper consisting of ultralong HAP nanowires and CFs and LDO nanosheets has been developed for rapid water filtration and highly efficient dye adsorption. Positively charged LDO nanosheets can adsorb on the surface of negatively charged ultralong HAP nanowires and embed in the porous networked structure of the LDO/HAP/CF nanocomposite filter paper, which can provide a porous structure for rapid water transportation and can adjust the pore size of the nanocomposite filter paper. As a result, the pure water flux of the LDO/HAP/CF nanocomposite filter paper can be adjusted. The optimized pure water flux of the LDO/HAP/CF nanocomposite filter paper can reach 783.6 L m-2 h-1 bar-1, which is 1.51 times that of the HAP/CF filter paper without LDO nanosheets (518.6 L m-2 h-1 bar-1). More importantly, the adsorption capacity of LDO nanosheets is high for dye molecules, the rejection percentage of Congo red (CR) by the as-prepared HAP/CF filter paper is only 59.8%, and its water flux is 534.7 L m-2 h-1 bar-1. The optimized rejection percentage and water flux of the LDO/HAP/CF nanocomposite filter paper for CR are significantly enhanced (98.3% and 736.8 L m-2 h-1 bar-1, respectively) compared to those of the HAP/CF filter paper. The size of LDO nanosheets has a significant effect on the water flux and dye rejection percentage of the LDO/HAP/CF nanocomposite filter paper. The as-prepared LDO/HAP/CF nanocomposite filter paper is promising for the applications in highly efficient purification of wastewater containing dye molecules.

Nickel nanoparticles supported by commercial carbon paper (CP) are prepared by pulsed laser deposition with deposition time of 3, 6, and 12 min as a catalyst for urea electro-oxidation. The surface conditions and the morphologies of the prepared electrodes have been characterized by Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. Urea electro-oxidation reaction in KOH solution on the Ni/CP electrodes is investigated by cyclic voltammetry and chronoamperometry. The results show that the electrode with less Ni nanoparticle agglomeration shows higher peak current density, which was achieved in the 3 min deposition samples when normalized by electroactive surface areas. However, the highest current normalized by the area of the carbon paper was achieved in the 6 min deposition sample due to the larger quantity of Ni nanoparticles. All the samples show good stability. Our results suggest that the low density, low cost, and environmental friendly CP can be used as support for Ni nanoparticle as a catalyst for urea electro-oxidation. It thus has great potential for many applications involving urea oxidation, such as wastewater treatments.

With the rapid emergence of wearable devices, flexible lithium-ion batteries (LIBs) are much more needed than ever. Free-standing graphene-based composite paper electrodes with various active materials have appealed wide applications in flexible LIBs. However, due to the prone-to-restacking feature of graphene layers, a long cycle life at high current densities is rather difficult to be achieved. Herein, a unique three-dimensional (3D) hierarchically porous NiO micro-flowers/graphene paper (fNiO/GP) electrode is successfully fabricated. The resulting fNiO/GP electrode shows superior long-term cycling stability at high rates (e.g., storage capacity of 359 mAh/g after 600 cycles at a high current density of 1 A/g). The facile 3D porous structure combines both the advantages of the graphene that is highly conductive and flexible to ensure rapid electrons/ions transfer and buffer the volume expansion of NiO during charge/discharge, and of the micro-sized NiO flowers that induces hierarchical between-layer pores ranging from nano-micro meters to promote the penetration of the electrolyte and prevent the re-stacking of graphene layers. Such structural design will inspire future manufacture of a wide range of active materials/graphene composite electrodes for high performance flexible LIBs.

Direct ambient ionization techniques have been developed with the aim to reduce the complexity of mass spectrometry analysis by minimizing sample preparation and chromatographic separation. In this context, paper spray-MS (PS-MS) is an innovative approach that provides faster and cheaper analysis of biofluids by the addition of the sample directly to a paper. In forensic toxicology, the analytical workflow for the detection and quantification of drugs of abuse is onerous, including sample treatment, extraction and clean up, especially regarding complex biological matrices. PS-MS allows the detection of analytes of toxicological interest in blood, plasma and urine using low sample volume. This review aims to discuss the potential use, advances and challenges of PS-MS in forensic toxicology.

A superhydrophobic paper with excellent robustness was fabricated by roll coating with modified nano-TiO2. First, nano-TiO2 particles were hydrophobically modified by γ-aminopropyltriethoxysilane and 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane (POTS). Then the paper coating composed of modified nano-TiO2 particles as pigments and epoxy resin (EP) as adhesives was coated on a paper surface to create the desired surface morphology and surface energy. Compared with the uncoated filter paper, the prepared paper showed an improved rough surface morphology owing to the uniform layer of TiO2 microclusters deposited on the fiber network. The superhydrophobic paper exhibited water contact angles (WCA) about 153° ± 1.5°, and water sliding angles (WSA) about 3.5° ± 0.5°, low surface adhesion and excellent bounce ability. The superhydrophobic paper can withstand a variety of wear and tear, such as tape stripping and knife scraping. The as-prepared superhydrophobic paper showed mechanical durability even after 20 wear cycles with sandpaper,thus sustaining excellent superhydrophobicity on the filter paper surface. Moreover, it remains fully functional even in environments with high concentrations of acid and alkali for 96 h. The superhydrophobicity was not affected after storage for 6 months in a natural environment. It was confirmed that the superhydrophobic paper surface exhibited excellent chemical stability, long-term stability and self-cleaning properties. The entire production process was operated under normal environment, without complex equipment; and, as such, has the possibility for large-scale production and application in industry.

A method for treating cellulose paper using the ionic liquid 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) was developed. The treatment was intended to reform the paper structure. Filter paper was immersed in 20 g of molten [BMIM]Cl at 80 °C for 20–80 s and then washed with ethanol and distilled water. The treated paper was then immersed in tert-butyl alcohol before drying in a freeze dryer for 30 min. Next, polyethylene glycol (PG) and trichloromethylsilane were fixed to freeze-dried paper. The paper treated with [BMIM]Cl had a higher specific surface area than that not treated with [BMIM]Cl, and the specific surface area increased as the treatment time increased. The amount of PG fixed to the paper increased as the specific surface area of the paper increased, and PG improved moisture retention. The degree to which the moisture retention was improved was therefore related to the increase in the specific surface area caused by [BMIM]Cl treatment. Addition of trichloromethylsilane to the paper treated with [BMIM]Cl improved the hydrophobicity, and this was caused by the [BMIM]Cl treatment. Overall, [BMIM]Cl treatment was effective for reforming the paper structure and this improved the amount of functional material that could be fixed to the paper.

This study focuses on the production and characterization of biodegradable handmade paper from the Sida rhombifolia plant (SRP) cellulose. Sida rhombifolia plant is a seasonal plant that grows in the equatorial and tropical climates. The studies carried out on this SRP were aimed at investigating the methods required for the production of handmade paper from SRP plant and also at determining the tensile strength. Four specimens of SRP paper of different additive labels S0 (no additive), S1 (starch and KOH), S2 (starch), and S3 (Foska liquid glue) were produced using the Kraft method. Tensile properties (stress at break, elongation at break, and Young’s modulus), the rate of water absorption, and the rate of moisture absorption were carried out. Results showed that the addition of potassium hydroxide considerably reduces Young’s modulus of SRP handmade paper (S1) while the Foska liquid glue (S3) significantly improves it. In addition, the addition of potassium hydroxide and Foska liquid substantially improves the water absorption properties of the paper S2 and S3, respectively. The adhesive liquid creates more porosity and consequently increases the absorption of water. The addition of potassium hydroxide and Foska liquid significantly embedded the rate of moisture absorption. From the results obtained, it can be concluded that the paper S3 can be used as packaging paper since it has better mechanical properties and moisture absorption.

In this study, development of nanocoated paper and film to increase the shelf life of food has been demonstrated. Iron oxide (Fe2O3) nanoparticles were synthesized by neem leaves extract and characterized by UV-visible spectrophotometer, exhibited an absorption peak at 326 nm. Transmission electron microscope (TEM) showed the nanoparticles ranges between 5 nm to 50 nm and selected area electron diffraction (SAED) analysis revealed the amorphous in nature of nanoparticles. The biomolecules involved in the reduction of Fe2O3 nanoparticles were confirmed by Fourier transform infrared (FTIR) spectrum. The characterized nanoparticles were coated on cellulose paper, which was characterized by Scanning electron microscope (SEM). Coated paper was wrapped with fruit, and vegetables. Similarly, fruit and vegetables were also dipped in nanoparticle-incorporated sodium alginate solution. As a result, protein estimation and water loss were estimated on regular basis to determine the shelf-life of fruit and vegetables. The shelf-life of fruit and vegetables increases while evaluated with control and uncoated on weight loss and soluble protein content. Hence, the nanomaterial-coated paper and sodium alginate film prove its potential application as food packaging materials for longer shelf-life of food.

Water–oil separation from their emulsions and mixtures has been a prominent topic in fundamental research and in industries. A superhydrophobic/oleophilic membrane (SHP) was obtained by dipping a cellulose filter paper in an acetonitrile solution of toluene diisocyanate (TDI) and in that of N-(2,4-diaminophenyl) maleimide, alternatively and repeatedly for three times, to make the paper coated by maleimide-containing polyurea (PU), which was then reacted with n-dodecanethiol (DAT) through Michael addition to obtain the superhydrophobic porous membrane (SHP). All the involved reactions were confirmed by different techniques. SHP membrane as prepared was demonstrated to be superhydrophobic and oleophilic and of high performance in separation of oil and water from their emulsions and mixtures. This study provides a new route to the fabrication of new materials of high superhydrophobicity and oleophilicity, featured by ease of fabrication, low-cost and versatile availability of the starting materials, both synthetic and natural.

Fluorine-free cellulosic paper was successfully obtained by coating the glassine base paper with eco-friendly cellulosic coating, which was made from dissolving cellulose in 8 wt% NaOH/12 wt% urea aqueous solution. Then the coated paper was severally immersed into CH3COOH, Na2SO4, and H2O solution to coagulate and regenerate. Benefiting from the compact matrix and fully covered surface, the resultant cellulosic paper exhibited favorable barrier properties and mechanical performance. Notably, the paper coagulated with CH3COOH displayed the reduction in water–vapor transmission rate, air permeability, and uptake of organic solvents due to its low porosity (26.8%) and narrow pore size distribution (0.1–0.36 µm). The tensile strength and elongation at break of papers treated by CH3COOH at coating weight of 5 g/m2 were increased by 72.1% and 34.0%, respectively. In summary, the fluorine-free cellulosic paper with high oil and grease resistance is attractive for the development of high-performance materials for food packing applications. Fluorine-free paper was obtained from the glassine base paper coated with eco-friendly, non-fluorinated, and degradable cellulosic coating, then coagulated with CH3COOH, Na2SO4, and H2O solution, respectively. The resultant functional papers displayed enhanced barrier properties (oil, organic solvent, vapor, and gas) and mechanical performance.

The use of nanocelluloses is being conducted for the most diverse applications. Their performance as coating agent has been mainly explored to improve barrier properties, as they emerge as perfect candidate for plastic substitution, but it is also important to explore their potential to improve printing quality. In the present work, the influence of different nanocelluloses, obtained through mechanical, enzymatic, TEMPO-mediated oxidation and carboxymethylation treatments, in the coating process and inkjet printability of office papers was assessed. The results revealed that the cellulose nanofibrils are better for printability than the microfibrils. But the size and charge of the former must be taken into account, since fibrils of very small size penetrate the paper structure, dragging the pigments from the surface, and very anionic nanofibrils can also have negative influence on the optical density. Besides, an interesting synergy between surface-sizing starch and the cellulose nanofibrils was found to occur as the latter closed the paper structure, which prevented starch from penetrating, while potentiating both of their positive effects on ink pigment entrapment. An additional study of characterization of inkjet pigments was also performed.

Rapid and simultaneous in situ detection of multi-components is extremely crucial for the real-time monitoring of nutrients in fruits. Herein, a facile and user-friendly poly(carboxybetaine methacrylate)-coated paper-based microfluidic device (pCBMA-μPAD) has been exploited to synchronously identify and semi-quantify vitamin C, glucose, sucrose and fructose in fruits. The pCBMA was successfully grafted from the surface of paper sensor using a convenient and robust method, which was confirmed by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectrometry (XPS). The superior hydrophilicity and ultra-low fouling of pCBMA endowed the pCBMA-μPAD with remarkably rapid response (3 min), high sensitivity, good linear relationship and low detection limit (LOD) (vitamin C: y = 33.809 + 5.175x, R2 = 0.993, LOD = 0.179 mmol/L; glucose: y = −0.113 + 30.066lg(x), R2 = 0.988, LOD = 0.095 mmol/L; sucrose: y = −5.334 + 34.858lg(x), R2 = 0.996, LOD = 0.097 mmol/L; fructose: y = 4.996 + 23.325lg(x), R2 = 0.994, LOD = 0.140 mmol/L). Furthermore, satisfactory results were yielded in the detection of these nutrients in 9 fruits, which were much agreed well with those obtained by spectrophotometry. Such a portable and versatile pCBMA-μPAD will profoundly shape the future of food analysis, especially for the assessment of food quality and nutrition in the process of agricultural production and marketing.

Hydrocarbon gases, especially toxic ones like benzene and xylene, pose threats to human health and the environment. But existing detection techniques, like bulky GC-MS or portable PID, cannot fulfill people's requirement of affordable and reliable hydrocarbons monitoring for the purpose of personal exposure assessment. Here, a simple, low cost, and light hydrocarbon gases sensor using a smartphone camera as a readout was developed based on the paper based milli-cantilever bending induced by polymer swelling. Its sensing cantilever was composed of three layers: functional layer of polyethylene film, adhesive layer of double-side tape, and a substrate of weighing paper. And the dimensions of the milli-fabricated sensing cantilever are 8 mm long, 0.5 mm wide, and 50 μm thick. The sensor response was the displacement of milli-cantilever free end. As proof of concept, its performance to typical hydrocarbons of xylene, hexane, and BTEX was carefully examined. For all of them, the sensor showed good performance of linear response to hydrocarbon concentrations, wide detection range, low detection, and fast response. Taking xylene for example, the sensor showed wide detection range of 15-140 ppm, low detection limit of 15 ppm, and fast response of 30 s. The sensor cross-sensitivity to other hydrocarbons was consistent with polymer swelling theory that the more carbons the hydrocarbon has, the higher the sensor sensitivity. Taking advantage of the rough materials chosen and simple fabrication procedure, the developed sensors also had high stability with time, low cost, and good uniformity. The developed sensor is affordable both physically and financially, has good performance, could meet hydrocarbons monitoring requirements for occupational safety or air pollution in petroleum industry, and would benefit people's health.

Chitosan is a biopolymer that has shown promising results for surface treatment of paper to enhance barrier and mechanical properties. Commercially, chitosan is available with a wide range of degree of deacetylation (DD). Herein, effect of DD on performance of chitosan in surface application of paper is investigated. Surface application of chitosan of different DD (77%, 84% and 94%) was done at a dose of 1.0 ± 0.2 g/m2 on kraft paper and comparison in terms of strength, structural, surface and barrier properties of paper was performed. Different DD of chitosan was confirmed by FTIR analysis. Results showed that breaking length of paper maximally increased by 15.2%/26.6% in machine direction (MD)/cross direction (CD), respectively after surface application of 94% DD chitosan followed by 77% DD and 84% DD. The maximum increase in burst index, stretch in MD and TEA in both directions of paper was found after surface application of 94% DD chitosan. Results attained by 77% DD and 84% DD chitosan for improvement in burst index, stretch and tensile energy absorption of paper were also encouraging. Maximum increase in stiffness was observed in CD with application of 84% DD chitosan. Double fold of paper also increased the maximum after surface application of 84% DD chitosan. The best results of contact angle, surface energy, Cobb60 and water vapor transmission rate were attained after surface application with 94% DD chitosan whereas the results attained by 77% DD and 84% DD chitosan for contact angle, surface energy, Cobb60 were also encouraging.

Coated paper substrates are used for a wide range of applications. The biggest challenge that remains unsolved with regard to coated paper is its recyclability. Herein, we report a unique approach ...

Filter paper, as a widely used and low-cost lab consumable, can serve as template for the synthesis of one-dimensional (1D) materials since it is composed of 1D cellulosic fiber. In this work, 1D NiO/NiCo2O4 composite was simply fabricated by adsorption of Ni and Co acetate on the filter paper and subsequent calcination process. The precursors were obtained without further treatment to filter paper or chemical reaction between metal salts. Calcination process leads to the removal of template and formation of binary NiO/NiCo2O4 composite. Electromagnetic (EM) wave absorption performance of NiO/NiCo2O4 composite could be tuned by adjusting the calcination temperatures and dosage of metal salts. For the optimized absorber (calcination temperature of 600 °C and dosage of Ni and Co acetate with 2 mmol and 4 mmol), a wide absorption bandwidth of 6.08 GHz could be achieved with thickness of 1.88 mm and minimum reflection loss value was up to −57.4 dB by changing the thickness. The facile synthetic route may also inspire the preparation of other high-performance one-dimensional EM wave absorbing materials.

This article identifies the technological characteristics of the paper manufacturing industry in the Valley of Mexican Basin (VMB)—a densely populated region characterized by absolute water scarcity—in order to quantify the intensity with which water is used. The method consisted of modeling the paper industry’s technology estimating Cobb-Douglas production functions at two moments in time. The comparison of both functions makes it possible to identify water saving technologies during this period, and to evaluate whether the industry has made adjustments to deal with water restrictions. The data is obtained from the Economic Censuses of the National Institute of Statistics Geography and Informatics 2009 and 2014. While our work must be considered preliminary owing to the somewhat irregular nature of the data, certain clear conclusions do stand out. The paper industry located in the VMB has drastically reduced its water usage during the period of time analyzed. This is explained by the adoption of water saving technologies in the industry. In the process, an increase in capital is the main variable to explain such a technical change. This is expressed in the manner in which water and capital inputs appear to be highly suitable substitutes in paper manufacturing.

In this study, different methods for incorporating mixed or laminar copper microparticles (CuMPs) during papermaking were evaluated to determine the optimum paper-making process and correlate particle concentration and shape with antimicrobial activity. The addition of CuMPs during the disintegration of dry pulp stage was observed to produce a paper with uniformly distributed CuMPs, as determined through optical microscopy and UV–Vis spectroscopy analyses by measuring absorbance spectra in different areas of papers. Determination of two indices related to the concentration and distribution of copper will allow to predict the copper content in other papers. CuMP-paper samples were evaluated for structural, optical, and mechanical strength properties according to paper industry standards. Quantitative analyses by atomic absorption showed that between 24 and 39% of CuMPs were embedded in the paper fibre, independent of particle type. Finally, antibacterial activity analyses were performed according to ISO 20645 and ISO 20743. The results showed that papers with 0.30 g of incorporated CuMPs have antimicrobial activity, independent of particle morphology, with effects observed towards Gram (+) and Gram (−) bacteria and fungus. Furthermore, the evaluation of antimicrobial activity at different times of exposure to the microorganisms showed differences in effects that were dependent on the shape of the CuMPs incorporated into paper, where laminar particles exerted a sufficient effect, while no or a slight effect was observed for mixed CuMPs against Aspergillus niger.

Graphene oxide (GO) paper is an attracting structural material because of its high stiffness and light-weight. In order to exploit the high strength and stiffness of individual GO nanosheet into GO paper, the fabrication process must be optimized. In this study we fabricated ultra-stiff and strong GO paper by directed-flow vacuum filtration and compared its mechanical properties under different loading conditions. We also explored the effect of cross-linking with borax, thermal annealing and sonication to further enhance mechanical properties. The stiffest GO paper reported here has a tensile modulus of 109.9 GPa and a flexural modulus of 45.7 GPa. We also found that the flexural modulus of GO paper is significantly lower than the tensile modulus because of interlayer shearing, micro-buckling and delamination during flexural deformation. The properties of GO papers therefore need to be carefully selected for mechanical structures where flexion is the major deformation. This study provides significant insights about improving mechanical properties of GO paper and selecting GO paper for different loading conditions.

Mixed office waste paper (MOWP) is a low cost, high quality and easily collected fiber source for the papermaking industry. Unfortunately, limits in the application of traditional deinking are related to the negative environmental impacts of using chemicals during the deinking process. Hence, enzymatic deinking has received growing attention in the last decade. This study investigates the effect of using the effective enzymes produced from Rhizopus microspores AH3 which is grown on watermelon peel waste (WPW) extract, as a bio-deinking method in the deinking of MOWP, which is difficult to recycle because of their ink type and printing process. The methodology involves preparation of samples, impregnation with water, enzymatic treatment, washing, papermaking, evaluation of the produced paper sheets. The evaluation includes determination of the optical and mechanical properties as well as topographic investigation via scanning electron microscope of produced paper sheets. The results showed that there is an improvement in both optical and mechanical properties of all paper sheets produced in this study. The best enhancement was for medium B30 which was extracted by boiling of WPW for 30 min. This treatment gave high enhancement because of the effect of the produced enzymes from Rhizopus microspores AH3, where cellulase, xylanase, lignin peroxidase, poly phenol oxidase and laccase were 1.62, 1.49, 1.38, 1.2 and 1.5 U/ml, respectively. Moreover, the tensile strain (maximum load) increased by about 77% as well as the brightness percentage achieved about 86.78% and the deinking ability was increased approximately 16%.

Green/sustainable cellulose paper-based platforms at point-of-care testing have received much interest in biomedical fields at resource-limited settings. In such platforms, biomolecules would have to be immobilized onto paper substrate to achieve detection. Therefore, effective molecule immobilization is critical for the performance of paper-based testing, especially the detection sensitivity. Although various methods have been developed to improve the detection sensitivity, the immobilization capacity of biomolecules has not been considered yet. In this study, we developed a facile method for modifying paper materials by incorporating chitosan into NC membrane, which has positive effect on the pore size, porosity, and surface groups of NC membrane, hence, enhancing the immobilization capacity of biomolecules on paper substrate. We demonstrated the effectiveness of the above mentioned approach by using nucleic acid lateral flow assay (NALFAs) as a model paper-based platform; in comparison with the unmodified NALFAs, the results showed ten-fold increase in the detection sensitivity for HBV. We envision that this facile modification method will have a great potential for developing other highly sensitive paper-based detecting platforms.

This study is the first, to the best of our knowledge, where waste napkin paper was successfully valorized to low-density (27.2 mg cm−3) cellulose aerogels for oil sorption material. Two simple methods with different gel coagulators, ethanol and sulfuric acid, were used for preparation of the aerogel. Conditions for the alkaline treatment of the raw material and the pre-freezing temperature in the lyophilization process were optimized. It was found that the water and oil sorption capacities of the aerogels were not significantly affected by alkaline treatment, while they could be adjusted by changing the pre-freezing temperature. Although the produced aerogels were initially amphiphilic, hydrophobic surfaces were obtained by vapor deposition of methyltrimethoxysilane (MTMS) and these materials possessed high sorption capacities, up to 32.24 cm3 g−1 (28.56 g g−1) for pump oil and 26.77 cm3 g−1 (39.59 g g−1) for chloroform. This was comparable to aerogels prepared from fresh cellulosic materials via the sol-gel method, as their sorption capacities varied in the range of 14–45 g g−1.

Cannabinoids present a unique set of analytical challenges. An increasing number of states have voted to decriminalize recreational marijuana use, creating a need for new kinds of rapid testing. At the same time, synthetic compounds with activity similar to THC, termed synthetic cannabinoids, have become more prevalent and pose significant health risks. A rapid method capable of detecting both natural and synthetic cannabinoids would be useful in cases of driving under the influence of drugs, where it might not be obvious whether the suspect consumed marijuana, a synthetic cannabinoid, or both. Paper spray mass spectrometry is an ambient ionization technique which allows for the direct ionization of analyte from a biofluid spot on a piece of paper. Natural cannabinoids like THC, however, are labile and rapidly disappear from dried sample spots, making it difficult to detect them at clinically relevant levels. Presented here is a method to concentrate and preserve THC and synthetic cannabinoids in urine and oral fluid on paper for analysis by paper spray mass spectrometry. Sesame seed oil was investigated both as a means of preserving THC and as part of a technique, termed paper strip extraction, wherein urine or oral fluid is flowed through an oil spot on a strip of paper to preconcentrate cannabinoids. This technique preserved THC in dried biofluid samples for at least 27 days at room temperature; paper spray MS/MS analysis of these preserved dried spots was capable of detecting THC and synthetic cannabinoids at low ng/mL concentrations, making it suitable as a rapid screening technique. The technique was adapted to be used with a commercially available autosampler.

Cellulose is the main component of transformer insulating paper. In this paper, the pyrolysis mechanism of cellulose is studied by means of computational chemistry. This study is aimed at exploring the generation process of the methanol from cellulosic insulating paper at the atomic level. A simulation scheme of cellulose pyrolysis with detailed reaction pathways for methanol production has been obtained that is not readily accessible by experiments. The molecular dynamics method based on reactive force field (ReaxFF) is adopted to simulate the pyrolysis of cellobiose. A model composed of 40 cellobioses simulated at 500–3000 K was established, and the force biased monte-carlo is mixed into ReaxFF to make it closer to the actual situation and ensure the reliability. The result reveals that the –CH2– group from the C5 (or $${\text{C}}_{ 5}^{{\prime }}$$) group in cellobioses grabbed the nearby H atom to form methanol. In the pyrolysis process of cellobioses, methanol is stable at the early stage but unstable even disappeared in the later stage. The pre-exponential factor A and activation energy Ea of the ReaxFF-MD simulation are consistent with previous experimental results. Thus, this study provides an effective theory of the methanol as an indicator to evaluate the aging condition of cellulosic insulating paper in the early stage at the atomic level.

Monitoring of human serum albumin (HSA) in a point-of-care fashion is urgently needed in particular for elderly or chronically ill patients. Herein, a dual-state emissive chalcone probe having the feature of aggregation-induced emission was designed and synthesized. The concentration of HSA can be evaluated by the ratios of emission from probes in aggregated and monomeric state, which gives a visually discernible red-to-green color change. A simple, portable paper-based analytical device have been fabricated by integration of the recognition probe in the detection pad and employed for HSA test using the whole blood samples. This paper-based assay shows the analytical capability comparable to the standard testing methods but is in a point-of-care fashion, providing a promising tool for at-home HSA detection and HSA-related disease diagnosis.

In the present article we report a new hybrid microfluidic device (hyFlow) comprising a disposable paper electrode and a three-dimensional (3D) printed plastic chip for the electrochemical detection of a magnetic bead-silver nanoparticle (MB-AgNP) bioconjugate. This hybrid device evolved due to the difficulty of incorporating micron-scale MBs into paper-only fluidic devices. Specifically, paper fluidic devices can entrap MB-containing conjugates within their cellulose or nitrocellulose fiber matrix. The hyFlow system was designed to minimize such issues and transport MB conjugates more efficiently to the electrochemical detection zone of the device. The hyFlow system retains the benefit of fluid transport by pressure-driven flow, however, no pump is required for its operation. The hyFlow device is capable of detecting either pre-formed MB-AgNP conjugates or conjugates formed in-situ formation. The detection limit of AgNPs using this device is 12 pM, which represents just 22 AgNPs per MB.

Sensors based on fluorogenic RNA aptamers have emerged in recent years. These sensors have been used for in vitro and intracellular detection of a broad range of biological and medical targets. However, the potential application of fluorogenic RNA-based sensors for point-of-care testing is still little studied. Here, we report a paper substrate-based portable fluorogenic RNA sensor system. Target detection can be simply performed by rehydration of RNA sensor-embedded filter papers. This affordable sensor system can be used for the selective, sensitive, and rapid detection of different target analytes, such as antibiotics and cellular signaling molecules. We believe that these paper-based fluorogenic RNA sensors show great potential for point-of-care testing of a wide range of targets from small molecules, nucleic acids, proteins, to various pathogens.

The single-use of large volumes of paper has become a serious issue which is depleting our resources and damaging the environment. It is of great significance and challenging to adopt simple, reasonable and practical methods to prepare functional recyclable paper. In this article, inspired by pleochromatic creatures and plant leaves' special wettability, a series of photochromic amphiphobic recycled paper (PARi) products was successfully prepared by adding gourd-like modified tungsten trioxide (MTT) to waste paper pulp. The results show that PAR2–7 has excellent lyophobic performance and amazing photochromic properties. It is worth noting that PAR7 has an impressive amphiphobic behavior, and its surface water contact angle (WCA) and oil contact angle (OCA) are 146 ± 1° and 137 ± 1°, respectively. It can withstand continuous ultraviolet light irradiation for 60 h, indicating excellent resistance to ultraviolet radiation. Most importantly, the reversible photochromic properties of PAR7 make it possible to write repeatedly on the surface by using ultraviolet light. In short, the performance of the prepared PAR is stable and superior, which can not only alleviate paper waste, but also means it has great potential in the fields of decoration, packaging, and banknote anti-counterfeiting technology.

An electrical tree discharge model of multilayer insulation paper was prepared, and a voltage of 20 kV was used for electrical tree cultivation and initiation tests. Based on the microscopic image information and partial discharge (PD) information during the aging of the electrical tree, the development of electrical tree discharges between layers of paper comprising epoxy resin-impregnated paper insulation was studied. The results show that, by analysing PD information such as the discharge volume phase spectrum and the discharge repetition rate phase spectrum, the development of the electrical tree branch progresses in four stages: initial, growth, stagnation, and bursting. During the growth and stagnation stages, the main discharge paths of the electrical tree are mainly formed, and there are many filamentous fibres on the path edge. During the burst stage, more branches will be formed on the electrical tree, which will cause the greatest damage to the insulation. With the extension of the electrical tree path, the discharge magnitude and discharge times also increase. There are specific discharge patterns in different growth stages of the electrical tree, and the number of discharge events in each positive half-cycle is significantly greater than that in a negative half-cycle. Combining the microscopic image information and PD information during the aging of such an electrical tree, a theoretical basis for evaluating insulation state by PD monitoring is realised. The long-chain molecules of cellulose and epoxy resin break bonds and oxidise, which decompose into a large number of free radicals, monosaccharides, and other low-molecular-weight products.

This work reports the development of a rapid, simple and inexpensive colorimetric paper-based assay for the detection of the severe acute respiratory symptom coronavirus 2 (SARS-CoV-2) humanized antibody. The paper device was prepared with lamination for easy sample handling and coated with the recombinant SARS-CoV-2 nucleocapsid antigen. This assay employed a colorimetric reaction, which is followed by horseradish peroxidase (HRP) conjugated detecting antibody in the presence of the 3,3',5,5'-tetramethylbenzidine (TMB) substrate. The colorimetric readout was evaluated and quantified for specificity and sensitivity. The characterization of this assay includes determining the linear regression curve, the limit of detection (LOD), the repeatability, and testing complex biological samples. We found that the LOD of the assay was 9.00 ng μL-1 (0.112 IU mL-1). The relative standard deviation was approximately 10% for a sample number of n = 3. We believe that our proof-of-concept assay has the potential to be developed for clinical screening of the SARS-CoV-2 humanized antibody as a tool to confirm infected active cases or to confirm SARS-CoV-2 immune cases during the process of vaccine development.

A new type of hydrogel-coated paper sensor was developed for the semiquantitative and naked-eye detection of Cu2+ ions with high selectivity and good regenerability. The paper sensor showed a continuous color change from colorless to blue, resulting in semiquantitative naked-eye detection. Furthermore, similar to the classical pH test paper, a standard colorimetric card was used in the visual detection of Cu2+ ions by identifying the RGB value of the hydrogel-coated paper sensor. The application of the standard colorimetric card has greatly shortened the detection time and reduced the cost of detection, providing a new strategy for the naked-eye and semiquantitative detection of heavy-metal ions in water samples.

Coliforms are one of the most common families of bacteria responsible for water contamination. Certain coliform strains can be extremely toxic, and even fatal if consumed. Current technologies for coliform detection are expensive, require multiple complicated steps, and can take up to 24 hours to produce accurate results. Recently, open-channel, paper-based microfluidic devices have become popular for rapid, inexpensive, and accurate bioassays. In this work, we have created an integrated microfluidic coliform lysis and detection device by fabricating customizable omniphilic regions via direct printing of omniphilic channels on an omniphobic, fluorinated paper. This paper-based device is the first of its kind to demonstrate successful cell lysing on-chip, as it can allow for the flow and control of both high and low surface tension liquids, including different cell lysing agents. The fabricated microfluidic device was able to successfully detect E. coli, via the presence of the coliform-specific enzyme, β-galactosidase, at a concentration as low as ~10(4) CFU/mL. Further, E. coli at an initial concentration of 1 CFU mL(−1) could be detected after only 6 hours of incubation. We believe that these devices can be readily utilized for real world E. coli contamination detection in multiple applications, including food and water safety.

This work describes a terbium luminescence-based protocol to selectively detect gallate-derived green tea polyphenols on a supramolecular gel immobilised paper platform for the first time. This user-friendly, inexpensive (� 0.0015) approach requires very low sample volumes for the analysis. The developed strategy enables simultaneous detection of gallate polyphenols in multiple tea samples with the potential for practical applications. © 2020 Wiley-VCH GmbH

Detecting microRNA (miRNA) biomarkers expression is of great significance for the diagnosis and treatment of lung cancer. Surface-enhanced Raman scattering (SERS) has achieved microRNA sensing for the diagnosis of primary liver cancers. In this work, we developed a SERS technology for the rapid detection of lung cancers-related miRNA (miR-196a) using bimetallic Au-Ag nanowire (AgNW@AuNPs) substrates coupled with the target hairpin DNA. The finite-difference time-domain simulation proved that a large number of “hot spots” were generated between the AgNW and AuNPs, which resulted in a huge enhancement of the signal of Raman reporters. Filter paper treated by hexadecenyl succinic anhydride hydrophobic and modified with AgNWs@AuNPs was used as capturing substrate. The detection limits of miR-196a in PBS and serum were as low as 96.58 aM and 130 aM, respectively. Studies on nonspecific sequence and single-base mismatch of miRNA demonstrated that SERS-based platform was highly selective, excellent uniform, and reproducible. Finally, the platform was used to show that the miR-196a expression in the serum of lung cancer patients was much higher than that in healthy people. The detection results indicated that the SERS platform had potential applications in cancer diagnosis and might be a viable alternative to the conventional miRNA detection method, the real-time polymerase chain reaction (RT-PCR) technology.

The use of dielectric nanofluids has been recently proposed as a method to improve the insulation system of transformers. It has been widely reported that these liquids present superior dielectric properties than conventional dielectric liquids and have a better behavior as cooling agents. Nevertheless some aspects need to be addressed before these materials are applicable to real equipment. This paper analyzes the interaction between dielectric nanofluids and the cellulose materials that constitute the solid insulation of transformers. The impregnation process of a transformer has been emulated in order to obtain samples of solid insulation impregnated with a Fe3O4 based nanofluid. The samples have been subjected to ICP testing and CryoSEM observation, complemented with the determination of the EDX sprectrum. The interaction between the nanoparticles and the cellulose fibers has been investigated finding that bonds are established between them when cellulose is impregnated with nanofluids. This research was funded by the Spanish Ministry of Economy and Competitiveness. Grant Number DPI2015-71219-C2-2-R and Spanish Ministry of Innovation. Grant Number PID2019-107126RB-C21.

Currently, filter paper assay (FPA) is used to measure the hydrolytic potential of cellulase enzyme mixtures that are used to hydrolyze a range of cellulosic substrates. However, some of the Whatma...

Cellulose-based material has been increasingly used as a suitable substrate for depositing metal–organic frameworks (MOFs) in recent years. In this work, MOFs (Cu-BTC) were deposited onto carboxymethylated filter paper (CMP) using four different preparation procedures: one-pot, two-step, layer-by-layer-organic (LbL-org), and layer-by-layer-water-organic (LbL-wtr-org). The products (Cu-BTC@CMP) were comparatively characterized by SEM, ATR FT-IR, XRD, and BET specific surface area analyses. The Cu-BTC crystals were immobilized on the CMP surface, where different deposit ratios (1.31% for one-pot, 4.23% for two-step, 31.49% for LbL-org, and 39.38% for LbL-wtr-org, respectively) were obtained when different preparation procedures were used under the precondition of the same chemical dosage and reaction time. The Cu-BTC crystals were found to grow in the main solution rather than on the substrate surface and the layer-by-layer method would contribute to a remarkable quantity of MOFs depositing onto the substrate surface. The crystals on Cu-BTC@CMP surface prepared by LbL-wtr-org procedure presented a much larger particle size and rougher surface compared to those prepared by the LbL-org procedure due to the aqueous solution of copper precursor. Depositing more Cu-BTC onto CMP surface also endowed the composite prepared by LbL-wtr-org procedure with the highest gas adsorption capacity (1.59 × 102 m2/g of BET specific surface area). Hence, the LbL-wtr-org procedure will be an optimal pathway for depositing metal–organic frameworks onto cellulose-based materials with the advantages of saving organic solvents and best gas adsorption ability.

info:eu-repo/grantAgreement/EC/H2020/787410/EU The work was also partially funded by the Nanomark collaborative project between INCM (Imprensa Nacional - Casa da Moeda). Publisher Copyright: © 2021 The Author(s). Published by IOP Publishing Ltd. Titanium dioxide nanoparticles and nanostructured thin films were simultaneously synthesized using a microwave-assisted hydrothermal method. The synthesis formed very fine particles, appearing as nanospheres in the 11 nm size range. As for the nanostructured films, they have displayed similar structural characteristics to the nanoparticles, with thickness of 130 nm. These films covered uniformly and homogenously the Whatman paper, while maintaining its flexibility. The materials processed had their photocatalytic activity assessed from rhodamine B degradation under solar radiation (91% degradation after 40 min for the powder material and 68% after 6 h for the nanostructured thin films). Reusability experiments were also carried out, revealing superior performance concerning the Degussa P25, the most common photocatalyst used. The results of the present work can be thought as an option for the existing photocatalysts activated under solar light, namely for water purification, as it simultaneously produces enhanced photocatalytic powders and photocatalytic papers fully disposable and that can be easily recycled. publishersversion published

Bulk graphitic carbon materials with expanded interlayer spacing and abundant defects may serve as efficient anodes with high areal capacities for sodium-ion batteries (SIBs). However, obtaining long-range order in bulk graphitic carbon materials with expanded interlayer spacing is extremely difficult. Herein, an explosive decomposition method is demonstrated to realize thermally reduced graphene oxide (rGO) paper with tuned interlayer spacing. The in-situ temperature-dependent X-ray diffraction (td-XRD) was utilized to establish the correlation between heating rate and interlayer spacing. Based on td-XRD results, free-standing graphene paper (FSG) was synthesized at 450°C under a high heating rate of 70°C/min. The FSG exhibits a highly porous structure made of graphene flakes with abundant surface epoxy groups with an overall interlayer spacing of 0.38–0.39 nm. The rGO flakes in FSG are separated by large voids that provide fast mass transport pathways and allow expansion/contraction of crystallites upon reversible Na intercalation. The FSG was utilized directly as anodes without any binder and conductive agent and delivered an excellent reversible capacity of 290 mAh/g at a current density of 50 mA/g. Moreover, the FSG exhibited excellent foldability and rollability to create high areal density anodes, delivering an areal capacity of 0.62 mAh/cm2 at a current density of 100 μA/cm2. These results open the door to fabricate graphene material-based carbon anodes with tunable interlayer spacing for high-performance SIBs.

Inorganic salt modified paper substrates were developed and utilized in microfluidic paper based sampling coupled with potentiometric ion sensors for the determination of heavy metals, such as Cd2+ and Pb2+. The application of paper based sampling without any paper substrate pre-treatment were characterized with super Nernstian response, while the paper substrates with inorganic salt pre-treatment were characterized with standard Nernstian response. The application of inorganic salt modified paper substrates was found advantageous when the cation of the salt in the conditioning solution was the same as the primary cations of the ion-selective electrodes (ISEs). A relatively high concentration of inorganic salts during pre-treatment of the paper substrates, namely Cd(NO3)2 or Pb(NO3)2 with subsequent measurement of cadmium(II) and lead(II), by Cd2+- and Pb2+-ISEs, respectively was needed to sustain Nernstian response of sensors. It was also found that paper substrates facilitate sorption of metal ions onto the paper substrates, with stronger binding strength given to Pb2+ over Cd2+. Moreover, the metal-paper interactions suggest concentration dependent sorption-desorption of metal ion, which can have direct limitations of the use of paper based analytics for the determination of low analyte concentration of heavy metals. Nanyang Technological University The authors would like to thank NTU-India Connect Research Internship Program for financial support of Ms Tharini Saravana Sundaram from Coimbatore Institute of Technology, India.

The effects of spray additions of alginate, cationic guar gum, or chitosan on paper properties were determined. The aim of this study was to enhance the mechanical properties of papers after unrestrained drying, while maintaining or increasing the extraordinarily high elongation potential of these papers. The mechanical characteristics of the different polysaccharides were determined by tensile test of model films. Alginate resulted in very strong and stiff films with low strain at break values, while cationic guar gum and chitosan resulted in significantly weaker and softer films with high strain at break. The polysaccharide solutions were sprayed onto wet handsheets, and the paper properties were measured after restrained and unrestrained drying. The spray additions increased the tensile index, density, and tensile stiffness of the handsheets. Spray addition of alginate resulted in stiffer and stronger paper than the other tested polysaccharides. Alginate was able to increase the tensile index of the paper by 54% and the tensile stiffness by 32% after restrained drying. All strain at break values in this study correlated linearly with paper shrinkage during drying. Alginate, which gave extremely strong and stiff model films, enhanced paper shrinkage, effectively lowered the air permeability of the paper, and formed a polysaccharide film on top of the paper, was found to be the most promising candidate for future packaging applications. Graphical abstract: [Figure not available: see fulltext.].

The fabrication of low-cost, flexible, and recyclable electronic devices has been the focus of many research groups, particularly for integration in wearable technology and the Internet of Things (IoT). In this work, porous zinc oxide (ZnO) nanostructures are incorporated as a UV sensing material into the composition of a sustainable water-based screen-printable ink composed of car-boxymethyl cellulose (CMC). The formulated ink is used to fabricate flexible and foldable UV sensors on ubiquitous office paper. The screen-printed CMC/ZnO UV sensors operate under low voltage (≤2 V) and reveal a stable response over several on/off cycles of UV light exposure. The devices reach a response current of 1.34 ± 0.15 mA and a rise and fall time of 8.2 ± 1.0 and 22.0 ± 2.3 s, respectively. The responsivity of the sensor is 432 ± 48 mA W−1, which is the highest value reported in the literature for ZnO-based UV sensors on paper substrates. The UV-responsive devices display impressive mechanical endurance under folding, showing a decrease in responsivity of only 21% after being folded 1000 times. Their low-voltage operation and extreme folding stability indicate a bright future for low-cost and sustainable flexible electronics, showing potential for low-power wearable applications and smart packaging. publishersversion published