Search

Sequence-defined peptoids, or N-substituted glycines, are an attractive class of bioispired polymer due to their biostability and efficient synthesis. However, the de novo design of folded peptoids...

Significance Commonly observed secondary structures of proteins, such as α -helices and β -sheets, are built from a trans- amide backbone with residues sampling a single region of the Ramachandran plot. Here we report a secondary structure displayed by biomimetic peptoid polymers in which the backbone exhibits the cis conformation and alternating residues display rotational states of opposed (pseudo)chirality. This structure is linear and untwisted and enables strands to pack densely into extended bilayer nanosheets.

Peptoid nanosheets are supramolecular protein-mimetic materials that form from amphiphilic polypeptoids with aromatic and ionic side chains. Nanosheets have been studied at the nanometer scale, but the molecular structure has been difficult to probe. We report the use of 13C–13C dipolar recoupling solid-state NMR measurements to reveal the configuration of backbone amide bonds selected by 13C isotopic labeling of adjacent α-carbons. Measurements on the same molecules in the amorphous state and in nanosheets revealed that amide bonds in the center of the amino block of peptoid (NaeNpe)7–(NceNpe)7 (B28) favor the trans configuration in the amorphous state and the cis configuration in the nanosheet. This unexpected result contrasts with previous NMR and theoretical studies of short solvated peptoids. Furthermore, examination of the amide bond at the junction of the two charged blocks within B28 revealed a mixture of both cis and trans configurational states, consistent with the previously predicted brickwork...

Examples of long-range electronic conductivity are rare in biological systems. The observation of micrometer-scale electronic transport through protein wires produced by bacteria is therefore notable, providing an opportunity to study fundamental aspects of conduction through protein-based materials and natural inspiration for bioelectronics materials. Borrowing sequence and structural motifs from these conductive protein fibers, we designed self-assembling peptides that form electronically conductive nanofibers under aqueous conditions. Conductivity in these nanofibers is distinct for two reasons: first, they support electron transport over distances orders of magnitude greater than expected for proteins, and second, the conductivity is mediated entirely by amino acids lacking extended conjugation, π-stacking, or redox centers typical of existing organic and biohybrid semiconductors. Electrochemical transport measurements show that the fibers support ohmic electronic transport and a metallic-like temperature dependence of conductance in aqueous buffer. At higher solution concentrations, the peptide monomers form hydrogels, and comparisons of the structure and electronic properties of the nanofibers and gels highlight the critical roles of α-helical secondary structure and supramolecular ordering in supporting electronic conductivity in these materials. These findings suggest a structural basis for long-range electronic conduction mechanisms in peptide and protein biomaterials.

The absence of high-resolution structures of amyloid oligomers constitutes a major gap in our understanding of amyloid diseases. A growing body of evidence indicates that oligomers of the β-amyloid peptide Aβ are especially important in the progression of Alzheimer’s disease. In many Aβ oligomers, the Aβ monomer components are thought to adopt a β-hairpin conformation. This paper describes the design and study of a macrocyclic β-hairpin peptide derived from Aβ16–36. Sodium dodecyl sulfate–polyacrylamide gel electrophoresis and size exclusion chromatography studies show that the Aβ16–36 β-hairpin peptide assembles in solution to form hexamers, trimers, and dimers. X-ray crystallography reveals that the peptide assembles to form a hexamer in the crystal state and that the hexamer is composed of dimers and trimers. Lactate dehydrogenase release assays show that the oligomers formed by the Aβ16–36 β-hairpin peptide are toxic toward neuronally derived SH-SY5Y cells. Replica-exchange molecular dynamics demonstrates that the hexamer can accommodate full-length Aβ. These findings expand our understanding of the structure, solution-phase behavior, and biological activity of Aβ oligomers and may offer insights into the molecular basis of Alzheimer’s disease.

The assembly of the β-amyloid peptide, Aβ, into soluble oligomers is associated with neurodegeneration in Alzheimer’s disease. The Aβ oligomers are thought to be composed of β-hairpins. Here, the effect of shifting the residue pairing of the β-hairpins on the structures of the oligomers that form is explored through X-ray crystallography. Three residue pairings were investigated using constrained macrocyclic β-hairpins in which Aβ30–36 is juxtaposed with Aβ17–23, Aβ16–22, and Aβ15–21. The Aβ16–22–Aβ30–36 pairing forms a compact ball-shaped dodecamer composed of fused triangular trimers. This dodecamer may help explain the structures of the trimers and dodecamers formed by full-length Aβ.

Oligomers of the β-amyloid peptide Aβ have emerged as important contributors to neurodegeneration in Alzheimer’s disease. Mounting evidence suggests that Aβ trimers and higher-order oligomers derived from trimers have special significance in the early stages of Alzheimer’s disease. Elucidating the structures of these trimers and higher-order oligomers is paramount for understanding their role in neurodegeneration. This paper describes the design, synthesis, X-ray crystallographic structures, and biophysical and biological properties of two stabilized trimers derived from the central and C-terminal regions of Aβ. These triangular trimers are stabilized through three disulfide cross-links between the monomer subunits. The X-ray crystallographic structures reveal that the stabilized trimers assemble hierarchically to form hexamers, dodecamers, and annular porelike structures. Solution-phase biophysical studies reveal that the stabilized trimers assemble in solution to form oligomers that recapitulate some of the higher-order assemblies observed crystallographically. The stabilized trimers share many of the biological characteristics of oligomers of full-length Aβ, including toxicity toward a neuronally derived human cell line, activation of caspase-3 mediated apoptosis, and reactivity with the oligomer-specific antibody A11. These studies support the biological significance of the triangular trimer assembly of Aβ β-hairpins and may offer a deeper understanding of the molecular basis of Alzheimer’s disease.

Biological systems have evolved sophisticated molecular assemblies capable of exquisite molecular recognition across length scales ranging from angstroms to microns. For instance, the self-organization of glycolipids and glycoproteins on cell membranes allows for molecular recognition of a diversity of ligands ranging from small molecules and proteins to viruses and whole cells. A distinguishing feature of these 2D surfaces is they achieve exceptional binding selectivity and avidity by exploiting multivalent binding interactions. Here we develop a 2D ligand display platform based on peptoid nanosheets that mimics the structure and function of the cell membrane. A variety of small-molecule lipid-conjugates were co-assembled with the peptoid chains to create a diversity of functionalized nanosheet bilayers with varying display densities. The functional heads of the lipids were shown to be surface-exposed, and the carbon tails immobilized into the hydrophobic interior. We demonstrate that saccharide-functionalized nanosheets (e.g., made from globotriaosylsphingosine or 1,2-dipalmitoyl-sn-glycero-3-phospho((ethyl-1′,2′,3′-triazole)triethyleneglycolmannose)) can have very diverse binding properties, exhibiting specific binding to multivalent proteins as well as to intact bacterial cells. Analysis of sugar display densities revealed that Shiga toxin 1 subunit B (a pentameric protein) and FimH-expressing Escherichia coli (E. coli) bind through the cooperative binding behavior of multiple carbohydrates. The ability to readily incorporate and display a wide variety of lipidated cargo on the surface of peptoid nanosheets makes this a convenient route to soluble, cell-surface mimetic materials. These materials hold great promise for drug screening, biosensing, bioremediation, and as a means to combat pathogens by direct physical binding through a well-defined, multivalent 2D material.

Like polypeptides, peptoids, or N-substituted glycine oligomers, have intrinsic conformational preferences due to their amide backbones and close spacing of side chain substituents. However, the conformations that peptoids adopt are distinct from polypeptides due to several structural differences: the peptoid backbone is composed of tertiary amide bonds that have trans and cis conformers similar in energy, they lack a backbone hydrogen bond donor, and have an N-substituent. To better understand how these differences manifest in actual peptoid structures, we analyzed 46 high quality, experimentally determined peptoid structures reported in the literature to extract their backbone conformational preferences. One hundred thirty-two monomer dihedral angle pairs were compared to the calculated energy landscape for the peptoid Ramachandran plot, and were found to fall within the expected minima. Interestingly, only two regions of the backbone dihedral angles ϕ and ψ were found to be populated that are mirror images of each other. Furthermore, these two conformers are present in both cis and trans forms. Thus, there are four primary conformers that are sufficient to describe almost all known backbone conformations for peptoid oligomers, despite conformational constraints imposed by a variety of side chains, macrocyclization, or crystal packing forces. Because these conformers are predominant in peptoid structure, and are distinct from those found in protein secondary structures, we propose a simple naming system to aid in the description and classification of peptoid structure.

Vesicle formation in a series of amphiphilic sequence-defined polypeptoid block co-polymers comprising a phosphonated hydrophilic block and an amorphous hydrophobic block, poly- N-(2-ethyl)hexylglycine- block-poly- N-phosphonomethylglycine (pNeh- b-pNpm), is studied. The hydrophobic/hydrophilic block ratio was varied keeping the total chain length of the co-polymers constant. A new approach for characterizing the vesicle membrane morphology based on low-dose cryogenic electron microscopy (cryo-EM) is described. The individual low-dose micrographs cannot be interpreted directly due to low signal-to-noise ratio. Sorting and averaging techniques, developed in the context of protein structure determination, were thus applied to vesicle micrographs. Molecular dynamic simulations of the vesicles were used to establish the relationship between membrane morphology and averaged cryo-EM images. This approach enables resolution of the local thickness of the hydrophobic membrane core at the 1 nm length scale. The thickness of the hydrophobic core of the pNeh- b-pNpm membranes increases linearly with the length of the hydrophobic block.

High-resolution structures of oligomers formed by the β-amyloid peptide Aβ are needed to understand the molecular basis of Alzheimer’s disease and develop therapies. This paper presents the X-ray crystallographic structures of oligomers formed by a 20-residue peptide segment derived from Aβ. The development of a peptide in which Aβ17–36 is stabilized as a β-hairpin is described, and the X-ray crystallographic structures of oligomers it forms are reported. Two covalent constraints act in tandem to stabilize the Aβ17–36 peptide in a hairpin conformation: a δ-linked ornithine turn connecting positions 17 and 36 to create a macrocycle and an intramolecular disulfide linkage between positions 24 and 29. An N-methyl group at position 33 blocks uncontrolled aggregation. The peptide readily crystallizes as a folded β-hairpin, which assembles hierarchically in the crystal lattice. Three β-hairpin monomers assemble to form a triangular trimer, four trimers assemble in a tetrahedral arrangement to form a dodecamer, and five dodecamers pack together to form an annular pore. This hierarchical assembly provides a model, in which full-length Aβ transitions from an unfolded monomer to a folded β-hairpin, which assembles to form oligomers that further pack to form an annular pore. This model may provide a better understanding of the molecular basis of Alzheimer’s disease at atomic resolution.

Peptoid polymers are often crystalline in the solid-state as examined by X-ray scattering, but thus far, there has been no attempt to identify a common structural motif among them. In order to probe the relationship between molecular structure and crystal structure, we synthesized and analyzed a series of crystalline peptoid copolymers, systematically varying peptoid side-chain length (S) and main-chain length (N). We also examined X-ray scattering data from 18 previously reported peptoid polymers. In all peptoids, we found that the unit cell dimensions, a, b, and c, are simple functions of S and N: a (A) = 4.55, b (A) = [2.98]N + 0.35, and c (A) = [1.86]S + 5.5. These relationships, which apply to both bulk crystals and self-assembled nanosheets in water, indicate that the molecules adopt extended, planar conformations. Furthermore, we performed molecular dynamics simulations (MD) of peptoid polymer lattices, which indicate that all backbone amides adopt the cis conformation. This is a surprising conclusion, because previous studies on isolated molecules indicated an energetic preference for the trans conformer. This study demonstrates that when packed into supramolecular lattices or crystals, peptoid polymers prefer to adopt a regular, extended, all-cis secondary structure.

© The Royal Society of Chemistry. Synthesis of biomimetic multimetallic clusters is sought after for applications such as efficient storage of solar energy and utilization of greenhouse gases. However, synthetic efforts are hampered by a dearth of ligands that are developed for multimetallic clusters due to current limitations in rational design and organic synthesis. Peptoids, a synthetic sequence-defined oligomer, enable a biomimetic strategy to rapidly synthesize and optimize large, multifunctional ligands by structural design and combinatorial screening. Here we discover peptoid oligomers (≤7 residues) that fold into a single conformation to provide unprecedented tetra- and hexadentate chelation by carboxylates to a [Co4O4] cubane cluster. The structures of peptoid-bound cubanes were determined by 2D NMR spectroscopy, and their structures reveal key steric and side-chain-to-main chain interactions that work in concert to rigidify the peptoid ligand. This efficient ligand design strategy holds promise for creating new scaffolds for the abiotic synthesis and manipulation of multimetallic clusters.

Coiled coils are a robust motif for exploring amino acid interactions, generating unique supramolecular structures, and expanding the functional properties of biological materials. A recently discovered antiparallel coiled-coil hexamer (ACC-Hex, peptide 1) exhibits a unique interaction in which Phe and Ile residues from adjacent α-helices interact to form a Phe-Ile zipper within the hydrophobic core. Analysis of the X-ray crystallographic structure of ACC-Hex suggests that the stability of the six-helix bundle relies on specific interactions between the Phe and Ile residues. The Phe-Ile zipper is unprecedented and represents a powerful tool for utilizing the Phe-Ile interactions to direct supramolecular assembly. To further probe and understand the limits of the Phe-Ile zipper, we designed peptide sequences with natural and unnatural amino acids placed at the Phe and Ile residue positions. Using size exclusion chromatography and small-angle X-ray scattering, we found that the proper assembly of ACC-Hex from monomers is sensitive to subtle changes in side chain steric bulk and hydrophobicity introduced by mutations at the Phe and Ile residue positions. Of the sequence variants that formed ACC-Hex, mutations in the hydrophobic core significantly affected the stability of the hexamer, from a ΔG

Oligomeric assemblies of the protein α-synuclein are thought to cause neurodegeneration in Parkinson’s disease and related synucleinopathies. Characterization of α-synuclein oligomers at high resolution is an outstanding challenge in the field of structural biology. The absence of high-resolution structures of oligomers formed by α-synuclein impedes understanding the synucleinopathies at the molecular level. This paper reports the X-ray crystallographic structure of oligomers formed by a peptide derived from residues 36–55 of α-synuclein. The peptide 1a adopts a β-hairpin structure, which assembles in a hierarchical fashion. Three β-hairpins assemble to form a triangular trimer. Three copies of the triangular trimer assemble to form a basket-shaped nonamer. Two nonamers pack to form an octadecamer. Molecular modeling suggests that full-length α-synuclein may also be able to assemble in this fashion. Circular dichroism spectroscopy demonstrates that peptide 1a interacts with anionic lipid bilayer membranes, like oligomers of full-length α-synuclein. LDH and MTT assays demonstrate that peptide 1a is toxic toward SH-SY5Y cells. Comparison of peptide 1a to homologues suggests that this toxicity results from nonspecific interactions with the cell membrane. The oligomers formed by peptide 1a are fundamentally different than the proposed models of the fibrils formed by α-synuclein and suggest that α-Syn36–55, rather than the NAC, may nucleate oligomer formation.

The evolution of molecular morphology in bulk samples of comb diblock copolymer pNdc12-b-pNte21 across the lamellar order–disorder transition (ODT) is studied using resonant X-ray scattering at the oxygen K edge with the goal of determining whether the molecules remain extended or collapse above the ODT. The distinct spectral resonances of carbonyl oxygen on the backbone and ether oxygen in the pNte side chains combine with their different site symmetry within the molecule to yield strong differences in bulk structural sensitivity at all temperatures. Comparison with simple models for the disordered phase clearly reveals that disordering at the ODT corresponds to loss of positional order of molecules with extended backbones that retain orientational order, rather than backbone collapse into a locally isotropic disordered phase. This conclusion is facilitated directly by the distinct structural sensitivity at the two resonances. The roles of depolarized scattering in enhancing this sensitivity, and backgro...