Search

An alternative synthetic route towards the widely employed electroactive poly(TEMPO methacrylate) (PTMA) via a thermally robust methoxyamine-protecting group is demonstrated herein. Protection of the radical moiety of hydroxy-TEMPO with a methyl functionality and subsequent esterification with methacrylic anhydride allows the high-yielding formation of the novel monomer methyl-TEMPO methacrylate (MTMA). The polymerization of MTMA to poly(MTMA) (PMTMA) is investigated via free radical polymerization and reversible addition-fragmentation chain-transfer polymerization (RAFT), a reversible-deactivation radical polymerization technique. Cleavage of the temperature-stable methoxyamine functionality by oxidative treatment of PMTMA with meta-chloroperbenzoic acid (mCPBA) releases the electroactive PTMA. The redox activity of PTMA was confirmed by cyclic voltammetry in lithium-ion coin cells.

Urinary tract infections (UTIs) are amongst the most common and prevalent infectious diseases worldwide, with uropathogenic Escherichia coli (UPEC) reported as the main causative pathogen. Fluoroquinolone antibiotics are commonly used to treat UTIs but for infections involving UPEC biofilms, which are commonly associated with catheter use and recurrent episodes, ciprofloxacin is often ineffective. Here we report the development of a ciprofloxacin–dinitroxide (CDN) conjugate with potent UPEC biofilm-eradication activity. CDN 11 exhibited a 2-fold increase in potency over the parent antibiotic ciprofloxacin against UPEC biofilms. Moreover, CDN 11 resulted in almost complete UPEC biofilm cell eradication (99.7%) at concentrations as low as 12.5 μM, and significantly potentiated ciprofloxacin's biofilm-eradication activity against UPEC upon co-administration. The biofilm-eradication activity of CDN 11 highlights the potential of nitroxide functionalized antibiotics as a promising strategy for the treatment of biofilm-related UTIs.

This work demonstrates a new pathway to the direct on-surface fabrication of surface coatings by showing that application of a plasma can lead to dehalogenative coupling of small aromatic molecules at a catalytic surface. Specifically, we show that a room temperature, atmospheric pressure plasma can be used to fabricate a coating through a surface-confined dehalogenation reaction. Plasma treatments were performed using a dielectric barrier discharge (DBD) technique under pure nitrogen with a variety of power levels and durations. Samples were analysed by optical and helium ion microscopy (HIM), X-ray photoelectron spectroscopy (XPS), optical profilometry, and contact angle measurement. By varying the plasma parameters we could control the chemistry, morphology and roughness of the film. Surface wettability also varied with the plasma parameters, with high-dose plasmas leading to a hydrophobic surface with water contact angles up to 130°.

Bacterial biofilm formation on medical devices is a threat to healthcare systems worldwide as bacteria within a biofilm are more resistant to standard antimicrobial therapies. Herein, we introduce a nitroxide-based antibiofilm coating strategy, which is specifically designed to prevent biofilm formation of Gram-negative pathogens such as Pseudomonas aeruginosa. Nitroxide-decorated hydroxyapatite surfaces were readily prepared in an aqueous dip-coating procedure using a nitroxide-functionalized catecholamine as a polymerizable coating agent. Additional spatial control over the polymer surface deposition on titanium was gained by applying a photolithographic coating setup. All nitroxide-coated surfaces exhibited excellent antibiofilm properties toward PA14 surface colonization as biofilm formation was completely suppressed. Importantly, the surrounding adhesive polymer matrix did not interfere with the nitroxide-characteristic antibiofilm properties. The herein introduced platform technology represents a bioinspired and versatile coating approach, offering a safe and prophylactic avenue to combat biofilm contamination on a variety of surfaces.

We pioneer a versatile surface modification strategy based on mussel-inspired oxidative catecholamine polymerization for the design of nitroxide-containing thin polymer films. A 3,4-dihydroxy-l-phenylalanine (l-DOPA) monomer equipped with a 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-derived oxidation-labile hydroxylamine functional group is employed as a universal coating agent to generate polymer scaffolds with persistent radical character. Various types of materials including silicon, titanium, ceramic alumina, and inert poly(tetrafluoroethylene) (PTFE) were successfully coated with poly(DOPA-TEMPO) thin films in a one-step dip-coating procedure under aerobic, slightly alkaline (pH 8.5) conditions. Steadily growing polymer films (∼1.1 nm h–1) were monitored by ellipsometry, and their thicknesses were critically compared with those obtained from atomic force microscopic cross-sectional profiles. The heterogeneous composition of surface-adherent nitroxide scaffolds examined by X-ray photoelectron spectr...

We pioneer an approach for the visualization of pH-controlled molecular release of a fluorescent drug from a nitroxide polymer which combined yields a profluorescent system. A methacrylate-based terpolymer, bearing water-solubilizing triethylene-glycol chains, unpaired spins in the form of nitroxide and hydrazone-bound doxorubicin was synthesized to explore the possibilities of release quantification from profluorescent assemblies. Critically, we establish the fluorescence-silencing effect of polymer-bound nitroxides on covalently attached fluorophores and the overall accessibility of such constructs. The facile approach towards a functional assembly shown here provides an easy-to-assemble construct for complex delivery architectures towards applications in theranostics.

We introduce the preparation and ring-opening polymerization of a nitroxide containing carbonate monomer. Using 1,8-diazabicyclo undec-7-ene (DBU) and a thiourea as the catalyst system, we demonstrate that the free radical moiety of the monomer has no influence on the ring-opening copolymerization with D/L-lactide in a wide range of compositions between 10% and 80% of the nitroxide monomer, which can be readily controlled by the comonomer composition in the polymerization mixture. The copolymers exhibit narrow and monomodal mass distributions with number average molar masses between 6000 g·mol −1 to 7000 g·mol −1 and low dispersities below 1.1. The free radical functionality is retained during the polymerization as demonstrated by electron spin resonance (EPR) spectroscopy. High-resolution mass spectrometry coupled to size exclusion chromatography allowed an in-depth analysis of the copolymers showing well-defined linear polymer chains with excellent endgroup fidelity. Furthermore, the molar mass of the polymers was controlled by the monomer to initiator ratio which led to copolymers of up to 19 500 g·mol −1 .

Biofilms are highly organised colonies of microorganisms, at a surface or an interface, which are extremely resistant to treatment with biocides or antimicrobials. Consequently, biofilms are the primary cause of fouling and persistent infections in both industrial and clinical settings. Thus, there is a clear need to develop coatings that are able to prevent the growth of biofilms on surfaces. Herein, we report the development of polynitroxides for use as anti-biofilm coatings. We demonstrate that we can tune the composition of the nitroxide 2,2,6,6-tetramethyl-4-piperidyl methacrylate in a copolymer with methyl methacrylate in order to control the surface concentration of nitroxides in the resulting thin films. The prepared films are able to reduce biofilm fouling by Pseudomonas aeruginosa (PAO1) at nitroxide monomer concentrations as low as 30 wt%. The nitroxide containing materials show no difference in toxicity to mammalian cells, compared to poly(methyl methacrylate), in a proliferation assay with 3T3 fibroblast cells. This is the first demonstration of surface tethered nitroxides with activity against biofilms and provides new opportunities for developing antifouling surface coatings.

A range of profluorescent nitroxides (PFNs) were tested as probes to monitor photo-induced radical-mediated damage in polymer materials. The most stable and sensitive probe of the PFNs tested was an alkyne-linked perylenediimide PFN, 6b, with napthalimide and 9,10-bis(phenylethnyl)anthranene-based versions giving lower stability and sensitivity. Results from photo-ageing of poly(1-trimethylsilyl)-1-propyne (PTMSP) and the ethylene norbornene copolymer (TOPAS®) films doped with PFN probes demonstrated that sensors employing these support materials deliver significantly enhanced sensitivity compared to traditional techniques used to monitor photo-oxidative degradation of polymers, such as infrared spectroscopy. This enhanced sensitivity for detecting polymer damage improved methods for the determination of the serviceable application lifetime of polymers.

BODIPY is a highly versatile fluorophore for biological imaging with a tunable fluorescence emission (500 - 800 nm) that overlaps with the optically transparent window for tissue (600 - 1300 nm). Herein, we describe the synthesis of optically distinct BODIPY-based profluorescent probes bearing meso- and β-substituted isoindoline nitroxides and their corresponding methoxyamine derivatives. These profluorescent nitroxide probes possess strongly suppressed fluorescence, which can be revealed upon reduction or reaction with other radicals. Examination of the pentafluorophenylhydrazine reduction of the prepared probes using tandem EPR and fluorescence spectroscopy demonstrated that the asymmetric bis-β-substituted probe 9 (λem = 603 nm) was reduced the fastest, however, the greatest difference in fluorescence emission between the nitroxide and its reduced hydroxylamine analogue was observed for probe 7 (λem = 570 nm). The significant difference in fluorescence output between the nitroxides and their corresponding diamagnetic derivatives makes these probes ideal tools for imaging reactive oxygen species in biological systems.

We introduce the high-resolution electrospray ionization mass spectrometric (ESI MS) structural elucidation of polymerized 3,4-dihydroxy-L-phenylalanine (L-DOPA) carrying 1-methoxy-2,2,6,6-tetramethylpiperidin-4-amide groups in the side chain. Critically, our powerful ESI MS platform unambiguously revealed the structurally diverse character of this multifunctional bio-adhesive polymer system.

We pioneer a self-reporting profluorescent release system driven by the thermo-reversible dynamic covalent ligation of chromophores to a lateral polymer chain, whose fluorescence is silenced by unpaired spins of nitroxide moieties prior to release. The introduced technology platform holds significant potential for imaging substrate release events.

We introduce a mass spectrometric access route to nitroxide containing polymers via high resolution electrospray ionization mass spectrometry (HR ESI MS), a polymer class that is – due to the presence of unpaired spins – highly challenging to analyze via NMR techniques. The nitroxide content within the polymer chain structure was varied between 11.3 and 29.1 mol% in a statistical copolymer consisting of styrene-stat-4-(chloromethyl)styrene (p(S-stat-CMS), 4800 ≥ Mn/g mol−1 ≥ 11 100), where 4-carboxy-2,2,6,6-tetramethylpiperidine 1-oxyl (4-carboxy-TEMPO) units were attached by post-polymerization modification. By carefully evaluating the isotopic pattern of the nitroxide containing polymers, we demonstrate that the persistent nitroxyl radical retains its structural integrity during the soft ionization process employing spray currents up to 4.3 keV and in-source collision induced dissociation energies up to 30 eV using chloride attachment technology in negative ion mode. Interestingly, high-molecular weight gas-phase aggregates are identified with increasing amounts of nitroxide side-chain functionalization. To further exemplify the power of the introduced mass spectrometric protocol, a well-defined styrene based polymer was synthesized via atom transfer radical polymerization (ATRP, Mn = 5600 g mol−1, Đ = 1.05) containing functional groups, i.e. a terminal cyanuric acid unit and Hamilton Wedge moiety as well as a free nitroxide in the penultimate position to the Hamilton wedge. The intact persistent nitroxide radical at the chain end was unambiguously identified by its isotopic pattern in a highly defined polymer structure.

Fluorescent probes are widely used for imaging and measuring dynamic processes in living cells. Fluorescent antibiotics are valuable tools for examining antibiotic&ndash, bacterial interactions, antimicrobial resistance and elucidating antibiotic modes of action. Profluorescent nitroxides are &lsquo, switch on&rsquo, fluorescent probes used to visualize and monitor intracellular free radical and redox processes in biological systems. Here, we have combined the inherent fluorescent and antimicrobial properties of the fluoroquinolone core structure with the fluorescence suppression capabilities of a nitroxide to produce the first example of a profluorescent fluoroquinolone-nitroxide probe. Fluoroquinolone-nitroxide (FN) 14 exhibited significant suppression of fluorescence (&gt, 36-fold), which could be restored via radical trapping (fluoroquinolone-methoxyamine 17) or reduction to the corresponding hydroxylamine 20. Importantly, FN 14 was able to enter both Gram-positive and Gram-negative bacterial cells, emitted a measurable fluorescence signal upon cell entry (switch on), and retained antibacterial activity. In conclusion, profluorescent nitroxide antibiotics offer a new powerful tool for visualizing antibiotic&ndash, bacterial interactions and researching intracellular chemical processes.

Profluorescent nitroxides (PFNs) have emerged as an important class of imaging agents for monitoring intracellular redox status and levels of oxidative stress. However, the fast reduction of nitroxides upon incubation within cells limits the window of opportunity for detection. By increasing the concentration of nitroxides per fluorophore, their reduction to the corresponding hydroxylamines and the subsequent switch-on of fluorescence can be delayed. Herein the preparation of nitroxide-containing polymers of different chain length coupled to a fluorophore is reported and their reduction with pentafluorophenylhydrazine is examined. The fluorescence switch-on kinetics and radical concentrations are monitored by fluorescence and electron paramagnetic resonance spectroscopy and compared to a conventional PFN bearing a single nitroxide moiety. The polymeric PFNs display significant delays in reduction and fluorescence switch-on and higher turn-on ratios than their single-nitroxide counterparts. The results of this study indicate that polymeric PFNs are a promising architecture for future imaging agents.

Here we report the first example of an alkoxyamine derived from an azaphenalene nitroxide, which when exposed to UV-light, readily undergoes homolysis to efficiently and cleanly re-form a nitroxide. This process selectively cleaves the C–O bond of the alkoxyamine and occurs orders of magnitude more rapidly than any other alkoxyamine homolysis previously described in the literature. We demonstrate the use of light to generate a persistent radical effect (PRE) and apply this to undertake radical insertion, radical exchange and proof of concept polymerization reactions.

A substrate‐independent and versatile coating platform for (spatially resolved) surface functionalization, based on nitroxide radical coupling (NRC) reactions and the formation of thermo‐labile alkoxyamine functional groups, was introduced. Nitroxide‐decorated poly(glycidyl methacrylate) (PGMA) microspheres, obtained through bioinspired copolymer surface deposition using dopamine and a nitroxide functional dopamine derivative as monomers, were conjugated with small functional groups in a rewritable process. Reversible coding of the nitroxide functional microspheres by NRC and decoding through thermal alkoxyamine fission were monitored and characterized by electron paramagnetic resonance (EPR) spectroscopy and X‐ray photoelectron spectroscopy (XPS). In addition, this nitroxide coating system was exploited in “grafting‐to” polymer surface ligations of poly(methyl methacrylate) (PMMA) and poly(2,2,2‐trifluoroethyl methacrylate) (PTFEMA) in spatially confined areas. Polymer strands terminated with an Irgacure 2959 (2‐hydroxy‐4′‐(2‐hydroxyethoxy)‐2‐methylpropiophenone) photoinitiator were obtained through chain‐transfer polymerization, and subsequently coupled to nitroxide‐immobilized poly(dopamine) (PDA)‐coated silicon substrates by using rapid photoclick NRC reactions. Light‐driven polymer surface coding was visualized by time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) and XPS imaging.

Recent advances in helium ion microscopy (HIM) have enabled the use of fine-focused He+ beams to image and shape materials at the nanoscale. In addition to traditional ion milling, the beam can also be used to induce reactions, such as cross-linking, in films of organic molecules. Here, we compare the use of focused ion and electron beams to fabricate spatially-defined cross-linked features in nanometre-thick films of tetracene. Ion and electron beam treatments were performed using the focussed energetic beams in a HIM and a scanning electron microscope, respectively. The patterned samples were analysed by optical microscopy, HIM, atomic force microscopy and nanoindentation. For samples fabricated using both energetic beams, the total deposited particle dose could be used to modify the optical properties, thickness and hardness of the dosed regions. X-ray photoelectron spectroscopy revealed that the dosed regions exhibited a higher sp3 content, consistent with crosslinking; rinsing in solvent showed that the patterned regions were insoluble and could be isolated by removing the unmodified film through dissolution. These molecular nanopatterns demonstrate the promise for ultrahigh resolution chemical lithography, and for fabrication of nanocomponents with tailored physical properties.

A range of varying chromophore nitroxide free radicals and their nonradical methoxyamine analogues were synthesized and their linear photophysical properties examined. The presence of the proximate free radical masks the chromophore's usual fluorescence emission, and these species are described as profluorescent. Two nitroxides incorporating anthracene and fluorescein chromophores (compounds 7 and 19, respectively) exhibited two-photon absorption (2PA) cross sections of approximately 400 G.M. when excited at wavelengths greater than 800 nm. Both of these profluorescent nitroxides demonstrated low cytotoxicity toward Chinese hamster ovary (CHO) cells. Imaging colocalization experiments with the commercially available CellROX Deep Red oxidative stress monitor demonstrated good cellular uptake of the nitroxide probes. Sensitivity of the nitroxide probes to H(2)O(2)-induced damage was also demonstrated by both one- and two-photon fluorescence microscopy. These profluorescent nitroxide probes are potentially powerful tools for imaging oxidative stress in biological systems, and they essentially "light up" in the presence of certain species generated from oxidative stress. The high ratio of the fluorescence quantum yield between the profluorescent nitroxide species and their nonradical adducts provides the sensitivity required for measuring a range of cellular redox environments. Furthermore, their reasonable 2PA cross sections provide for the option of using two-photon fluorescence microscopy, which circumvents commonly encountered disadvantages associated with one-photon imaging such as photobleaching and poor tissue penetration.

International audience; The current study reports the synthesis and properties of a novel isoindoline nitroxide containing a benzophenone chromophore fused into the carbon framework. When exposed to UV light, rather than undergoing traditional benzophenone photochemical pathways, the presence of the nitroxide enables an energy transfer process whereby the nitroxide enters an excited state which induces an efficient hydrogen atom transfer from unactivated alkanes.