Search

There is a need for photocatalysts with efficient photocarrier separation to address issues with environmental pollution. Photocarrier separation is largely determined by the orbital composition ne...

To understand the unexpected and puzzling long-term stability of nanoscale gas bubbles, it is crucial to probe their nature and intrinsic properties. We report herein synchrotron-based scanning transmission X-ray microscopy (STXM) evidence of highly condensed oxygen gas molecules trapped as surface nanobubbles. Remarkably, the analysis of absorption spectra of a single nanobubble revealed that the oxygen density inside was 1-2 orders of magnitude higher than that in atmospheric pressure, and these bubbles were found in a highly saturated liquid environment with the estimated oxygen concentration to be hundreds of times higher than the known oxygen solubility in equilibrium. Molecular dynamics simulations were performed to investigate the stability of surface nanobubbles on a heterogeneous substrate in gas-oversaturated water. These results indicated that gas molecules within confinement such as the nanobubbles could maintain a dense state instead of the ideal gas state, as long as their surrounding liquid is supersaturated. Our findings should help explain the surprisingly long lifetime of the nanobubbles and shed light on nanoscale gas aggregation behaviors.

Vibration is a very common process in nature, industry, biology, etc. Thus, whether vibration could induce the formation of nanoscale bubbles in water or not is very important for some chemical or biological reactions. In this paper, we designed a control experiment to simulate the vibration process to explore the production and stability of bulk nanobubbles. Experimental results showed that the vibration could indeed induce the formation of a certain number of bulk nanobubbles in water. In addition, the formation of bulk nanobubbles depended on the frequency and time of vibration. The existence of gas-liquid interface played an important role for the bulk nanobubbles formation because that external air is a possible important gas source. Our findings would be helpful to explore the mystical behavior of nanobubbles in natural processes.

It has been suggested that irreversible adsorption at the gas/liquid interface of bulk nanobubbles will reduce the Laplace pressure, leading to their stability. However, most previous studies have focused on the stability of individual nanobubbles. Bulk nanobubbles are polydispersed suspensions, and gas molecules can diffuse between bubbles, leading to their collective dynamics, which may be crucial to understanding their formation process and stability. In this study, we proposed a mean-field theory for computing the evolution of the size-distribution function of bulk nanobubbles with size-dependent surface tension. We applied this theory to investigate the evolution of bulk nanobubbles with insoluble surfactants pinned at their gas/water interface. The results show that Ostwald ripening can be suppressed when enough surfactants are adsorbed. Bulk nanobubbles can be produced by the shrinkage of microbubbles in an air-saturated solution. The mean stable size is controlled by the amount of surfactants and the initial microbubble concentration; these predictions are qualitatively consistent with the experimental results of micro/nanobubbles produced using the microfluidic method.

Strobilanthes tonkinensis Lindau is a member of the family Acanthaceae, which was originated from Yunnan province of China and is used as tea and health promotion. Here, we reported the complete chloroplast genome sequence of S. tonkinensis using Illumina high-throughput sequencing approach. The size of the chloroplast genome is 144,765 bp in length, containing a pair of inverted repeats (IRs, 17,362 bp) that are separated by the large single-copy (LSC, 92,248 bp), and small single-copy (SSC, 17,793 bp) regions. A total of 129 genes were identified, including 37 tRNA genes, 8 rRNA genes, and 84 protein-coding genes. The overall GC content is 38.21%. Phylogenetic analysis indicated that S. tonkinensis is closely related to Strobilanthes cusia and Strobilanthes bantonensis.

Nanobubbles have many fascinating properties and the mechanism of their formation and stability still needs further exploration. According to the conventional theory and experiences, it was suggested that surface/bulk nanobubbles would only be produced at conditions of high gas concentration and stabilized in a gas oversaturated state. However, we showed here that both surface and bulk nanobubbles could be formed at conditions of low gas concentration and exist in an unsaturated gas environment in water for a long time. In our experiments, the surface/bulk nanobubbles were produced by a new method of water decompression started from the normal pressure. Sufficient surface/bulk nanobubbles could be generated during the decompression within a certain time and were quite stable even after the pressure was recovered to the normal pressure. The evolution process of the bulk nanobubbles with the time of decompression was studied and it was found that the concentration of the bulk nanobubbles was firstly increas...

The detection of local dielectric properties is of great importance in a wide variety of scientific studies and applications. Here, we report a novel method for the characterization of local dielectric distributions based on surface adhesion mapping by atomic force microscopy (AFM). The two-dimensional (2D) materials graphene oxide (GO), and partially reduced graphene oxide (RGO), which have similar thicknesses but large differences in their dielectric properties, were studied as model systems. Through direct imaging of the samples with a biased AFM tip in PeakForce Quantitative Nano-Mechanics (PF-QNM) mode, the local dielectric properties of GO and RGO were revealed by mapping their surface adhesion forces. Thus, GO and RGO could be conveniently differentiated. This method provides a simple and general approach for the fast characterization of the local dielectric properties of graphene-based materials and will further facilitate their applications in energy generation and storage devices.

This study investigated the effects of water-soluble polysaccharide extracted from the sporoderm-removed spores of Ganoderma lucidum (GLP) against AOM/DSS-induced inflammation, tumorigenesis, and gut microbiota modification, which has never been reported before. Our data revealed that GLP (200 and 300 mg/kg) decreased AOM/DSS-induced colitis and tumorigenesis, manifested by significantly reduced disease activity index score, and total number and size of tumors. Furthermore, GLP ameliorated AOM/DSS-induced microbiota dysbiosis, increased short-chain fatty acid production, and alleviated endotoxemia by inhibiting TLR4/MyD88/NF-κB signaling. Besides, GLP profoundly improved gut barrier function as evidenced by increased numbers of goblet cells, MUC2 secretion, and tight junction protein expressions. GLP treatment inhibited macrophage infiltration and downregulated IL-1β, iNOS, and COX-2 expressions. Additionally, GLP inhibited lipopolysaccharides (LPS)-induced inflammation markers and MAPK (JNK and ERK) activation in macrophage RAW264.7, intestinal HT-29, and NCM460 cells. In conclusion, these results indicate that GLP is a promising prebiotic for the treatment of colorectal cancer.

Class integration and test order (CITO) problem is to devise an optimal inter-class order which can minimize stubbing efforts. The existing approach for this problem, whether it is graph-based or search-based, usually wastes a significant amount of time and efforts in finding test orders, and sometimes may devise sub-optimal solutions. To overcome this limitation, we introduce a multi-level feedback approach to better solve the CITO problem. In this method, we use a multi-level feedback strategy to calculate test profit for each class, and according to test profit, propose a reward and punishment mechanism to assess the performance of class and set its test priority. Instead of breaking cycles or searching for optimum in the previous methods, our method integrates classes by their test priority, therefore significantly reduces the running time. The experiments are conducted on five benchmark programs and eight industrial programs, and the obtained results are compared with graph-based and search-based approaches. The results indicate that our approach can minimize the stubbing cost efficiently for most programs of all typical approaches compared in this work.

Aphis gossypii, one of the most important agricultural pests in the world, can cause serious economic losses in the main crop-producing areas. To clarify issues such as the genetic differentiation, genetic structure, and demographic history of A. gossypii populations, we used 10 nuclear microsatellite loci (SSR) and two mitochondrial gene sequences (COI and Cytb) to investigate genetic diversity and population structure of A. gossypii populations that were collected from 33 sampling sites in China from different climatic zones. SSR and mtDNA data suggested low to moderate levels of genetic diversity. A star-shaped network of mtDNA haplotypes indicated that the maternal ancestor of China cotton aphids likely originated in Xinjiang. The POPTREE, STRUCTURE and principal coordinate analysis (PCoA) revealed two genetic clusters: an eastern and a western region group. Isolation by distance (IBD) results showed a positive correlation between geographic distance and genetic distance in the vast eastern region but not in the western region. Neutrality testing and mismatch distribution analysis provided strong evidence for a recent rapid expansion in most populations. Genetic bottleneck was not detected in A. gossypii populations of China. The present work can help us to develop strategies for managing this pest.

The existence of nanobubbles at a solid-liquid interface with high stability has been confirmed by myriad experimental studies, and their gaseous nature has also been extensively verified. However, nanodroplets of polydimethylsiloxane (PDMS) recently observed in the atomic force microscopy (AFM) measurement of nanobubbles plague the nanobubble community. It may easily lead to wrong interpretations of the AFM results and thus hinders further application of the already widely used AFM in nanobubble studies. Therefore, finding a direct experimental solution to distinguish nanobubbles from nanodroplets in AFM measurements is a matter of great urgency. Herein, we first developed an effective and reproducible method to produce PDMS nanodroplets at the highly ordered pyrolytic graphite (HOPG)/water interface. From their size, contact angle, and stiffness, the formed PDMS nanodroplets are not distinguishable from nanobubbles. However, the force curves on these two objects are strikingly different from each other, i.e., a peculiar plateau in both the approach and retraction curves was found on nanobubbles whereas they changed linearly between the jump-in and jump-off point on PDMS nanodroplets. Thus, the present study not only provided a simple and effective procedure to generate PDMS nanodroplets but also paved a simple practical and in situ way to discriminate nanobubbles from the PDMS nanodroplets by direct AFM force measurements.

The nucleation and stability of nanoscale gas bubbles located at a solid/liquid interface are attracting significant research interest. It is known that the physical and chemical properties of the solid surface are crucial for the formation and properties of the surface nanobubbles. Herein, we experimentally and numerically investigated the formation of nanobubbles on nanostructured substrates. Two kinds of nanopatterned surfaces, namely, nanotrenches and nanopores, were fabricated using an electron beam lithography technique and used as substrates for the formation of nanobubbles. Atomic force microscopy images showed that all nanobubbles were selectively located on the hydrophobic domains but not on the hydrophilic domains. The sizes and contact angles of the nanobubbles became smaller with a decrease in the size of the hydrophobic domains. The results indicated that the formation and stability of the nanobubbles could be controlled by regulating the sizes and periods of confinement of the hydrophobic nanopatterns. The experimental results were also supported by molecular dynamics simulations. The present study will be very helpful for understanding the effects of surface features on the nucleation and stability of nanobubbles/nanodroplets at a solid/liquid interface.

Viburnum odoratissinum has very high ornamental and medicinal value. In this study, the chloroplast (cp) genome sequence of V. odoratissinum was characterized using Illumina pair-end sequencing. Th...

The absorption of gas molecules at hydrophobic surfaces may have a special state and play an important role in many processes in interfacial physics, which has been rarely considered in previous theory. In this paper, force spectroscopic experiments were performed by a nanosized AFM probe penetrated into individual surface nanobubbles and contacted with a highly ordered pyrolytic graphite (HOPG) substrate. The results showed that the adhesion force at the gas/solid interface was much smaller than that in air measured with the same AFM probe. The adhesion data were further analyzed by the van der Waals force theory, and the result implied that the gas density near the substrate inside the surface nanobubbles was about 3 orders of magnitude higher than that under the standard pressure and temperature (STP). Our MD simulation indicated that the gas layers near the substrate exhibited a high-density state inside the surface nanobubbles. This high-density state may provide new insight into the understanding of the abnormal stability and contact angle of nanobubbles on hydrophobic surfaces, and have significant impact on their applications.

Ganoderma lucidum has been shown to have anti-obesity effects. However, polysaccharide extracted from the sporoderm-broken spores of Ganoderma lucidum (BSGLP) against obesity and its underlying mechanisms have never been reported. In the current study, we showed that BSGLP inhibited high-fat diet (HFD)-induced obesity, hyperlipidemia, inflammation, and fat accumulation in C57BL/6 J mice. BSGLP improved HFD-induced gut microbiota dysbiosis, maintained intestinal barrier function, increased short-chain fatty acids production and GPR43 expression, ameliorated endotoxemia, manifested by reduced serum lipopolysaccharide level, and increased ileum expression of tight junction proteins and antimicrobial peptides. Fecal microbiota transplantation study confirmed that BSGLP-induced microbiota change is responsible, at least in part, for obesity inhibition. Besides, BSGLP notably alleviated HFD-induced upregulation of TLR4/Myd88/NF-κB signaling pathway in adipose tissue. Collectively, our study showed for the first time that BSGLP might be used as a prebiotic agent to inhibit obesity and hyperlipidemia through modulating inflammation, gut microbiota, and gut barrier function.

The interfacial properties of nanodroplets are very significant for the exploration of the basic law governing the fluid behavior at the nanoscale and also the applications in some important processes in novel materials fabrication by forming a special and local reaction environment. However, many basic factors such as the interfacial tension or stiffness of nanodroplets are still lacking, partially because of the difficulty of making quantitative measurements of the interfacial interactions at the nanometer scale. Here, we used a novel atomic force microscopy (AFM) mode, PeakForce mode, to control the interaction between an AFM probe and nanodroplets, by which we could obtain the morphology and stiffness of nanodroplets simultaneously. The change in the stiffness with the size of the nanodroplets was observed where the smaller nanodroplets usually had a larger stiffness. To explain this phenomenon, we then established a theoretical model based on the Young-Laplace equation in which the deformation and size-dependent stiffness could be described quantitatively and the experimental observations could be explained with our numerical calculations very well. The general methodology presented here could also be extended to analyze the relevant behavior of nanobubbles and other wetting phenomena at the nanoscale.

A novel and green electrochemical immunosensor for detection of Staphylococcal enterotoxin Q (SEQ), a toxic superantigen that can induce severe food poisoning and even fatal conditions, was developed by fixing double-layer gold nanoparticles (AuNPs), horseradish peroxidase, and thionin-chitosan composite membrane on the glassy carbon electrode surface. Under optimal conditions, the developed immunosensor showed a wide linear range from 0.1 to 100 pg mL−1 (R 2 = 0.992) for SEQ with a low detection limit of 0.046 pg mL−1 (S/N = 3). The immunosensor had good specificity (no significant cross reaction with lipopolysaccharides, bovine IgG, Escherichia coli, or other common biological components), and remained fairly stable (over 87 % of the original signal response after stored for 20 days at 4 °C). In addition, the immunosensor was successfully applied to milk sample detection and demonstrated with high recoveries (from 91 to 113 %). In conclusion, the developed electrochemical immunosensor can supply a green and feasible tool for detection of SEQ in food.

The astonishing long lifetime and large contact angles of interfacial nanobubbles are still in hot debate despite numerous experimental and theoretical studies. One hypothesis to reconcile the two abnormalities of interfacial nanobubbles is that they have low surface tensions. However, few studies have been reported to measure the surface tensions of nanobubbles due to the lack of effective measurements. Herein, we investigate the in situ contact angles and surface tensions of individual interfacial nanobubbles immersed in different ethanol aqueous solutions using quantitative nanomechanical atomic force microscopy (AFM). The results showed that the contact angles of nanobubbles in the studied ethanol solutions were also much larger than the corresponding macroscopic counterparts on the same substrate, and they decreased with increasing ethanol concentrations. More significantly, the surface tensions calculated were much lower than those of the gas-liquid interfaces of the solutions at the macroscopic scale but have similar tendencies with increasing ethanol concentrations. Those results are expected to be helpful in further understanding the stability of interfacial nanobubbles in complex solutions.

Increases in frequency and magnitude of drought and heat events are the prime abiotic constraints, which cause considerable adverse effects on maize kernel set and grain yield. However, there is little information about a comprehensive and systematical understanding to identify the critical stage in the response of kernel numbers per spike (KNS) to individual and combined drought and heat stress around flowering. Here we evaluated three successive phases (florets development, florets pollination and seed setting) of kernel set under drought, heat and combined drought and heat stress (DS, HS and DHS) with two maize hybrids using the field site ponds covered with a rain shelter in 2018 and 2019. As an average in two years, KNS was reduced by 18.9 % in DS treatment, 10.8 % in HS treatment and 37.2 % in DHS treatment compared with the control treatment. The most considerable adverse impacts during the three phases were all observed in DHS treatment, followed by DS and HS treatments. Among the three phases, the impact of stress on seed setting was more substantial than that in the other two phases for both hybrids. Kernel abortion was the main reason for the decrease in KNS due to the stress, which resulted from the prevention of sugar–starch conversion. The starch content in the kernel was reduced by 42 % in DS treatment, 29 % in HS treatment and 58 % in DHS treatment on the 8th day after silking. This finding would supply a reference for breeders to evolve strategies in developing stress-resilient and high-yielding hybrids under climate change.

Bulk nanobubbles have unique properties and find potential applications in many important processes. However, their stability or long lifetime still needs to be understood and has attracted much attention from researchers. Bulk nanobubbles are generated based on ethanol-water exchange, a method that is generally used in the study of surface nanobubbles. Their formation and stability is further studied by using a new type of dynamic light scattering known as NanoSight. The results show that the concentration of the bulk nanobubbles produced by this method is about five times greater than that in the degassed group, which indicates the existence of bulk gas nanobubbles. The effects of ethanol/water ratios and temperature on the stability of the bulk nanobubbles have also been studied and their numbers reach a maximum at a ratio of about 1:10 (v/v).

The properties and stability of the reported surface nanobubbles are related to the substrate used and the generation method. Here, we design a series of experiments to study the influence of the hydrophobicity of the substrate and the production method on the formation and properties of nanobubbles. We choose three different substrates, dodecyltrichlorosilane (DTS) modified silicon, octadecyltrichlorosilane (OTS) modified silicon, and highly oriented pyrolytic graphite (HOPG) as nanobubble substrates, and two methods of ethanol–water exchange and 4-°C cold water to produce nanobubbles. It is found that using ethanol-water exchange method could produce more and larger nanobubbles than the 4-°C cold water method. The contact angle of nanobubbles produced by ethanol–water exchange depends on the hydrophobicity of substrates, and decreases with the increase of the hydrophobicity of substrates. More interestingly, nanoscopic contact angle approaches the macroscopic contact angle as the hydrophobicity of substrates increases. It is believed that these results would be very useful to understand the stability of surface nanobubbles.

Interfacial gaseous nanobubbles which have remarkable properties such as unexpectedly long lifetime and significant potential applications, are drawing more and more attention. However, the recent dispute about the contamination or gas inside the nanobubbles causes a large confusion due to the lack of simple and clean method to produce gas nanobubbles. Here we report a convenient and clean method to effectively produce interfacial nanobubbles based on a pure water system. By adding the cold water cooled at 4 degrees C for more than 48 h onto highly oriented pyrolytic graphite (HOPG) surface, we find that the average density and total volume of nanobubbles are increased to a high level and mainly dominated by the concentrations of the dissolved gases in cold water. Our findings and methods are crucial and helpful for settling the newly arisen debates on gas nanobubbles.