Search

Reduced activation ferritic/martensitic (RAFM) steels are assumed as structural material of blanket design activities. Determining the design limit is essential for the RAFM steels to qualify their use in fusion blankets. This work investigates fatigue properties of a RAFM steel, F82H at elevated temperature up to 823 K in the air and vacuum condition. The tests were carried out with axial strain controlled condition using cylindrical specimen, and the results were summarized using the Manson’s modified universal slope method, which can describe fatigue lifetime as a function of tensile properties. Although fatigue lifetime of F82H decreased with temperature, the fatigue lifetime up to 723 K fell into factor of 2 of the lifetime at ambient temperature. The lifetime at vacuum condition was successfully described using universal slope method. On the other hand, the lifetime in the air was 1/3 or shorter than that in vacuum condition. It is notable that a heat of F82H prepared for IEA round robin tests demonstrated 1/5 of shorter lifetime than latest F82H. The difference is discussed with inclusion morphologies affected by steel manufacturing process and so on. This report has been prepared as an account of work assigned to the Japanese Implementing Agency within the ‘‘Broader Approach Agreement’’ between the Government of Japan and the European Atomic Energy Community.

We developed a non-contact deformation measurement system to accurately evaluate strain for post irradiation tensile testing, since conventional strain gages cannot be used for small size specimens. The strain calculated from cross-head displacement generally includes deformation from specimen shoulders, fixtures, and the test frame in addition to the deformation from the specimen gauge section. In our system, the distance between painted marks within the specimen gauge section was measured using a high resolution video camera to evaluate the specimen deformation during room temperature tensile testing. The test materials were F82H and 9Cr ODS steels irradiated up to ≈71 displacements per atom (dpa) at about 573 K in High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL). Our system yielded accurate stress strain curves without deformations other than the specimen gage section, and the elongation was less than that calculated from cross-head displacement. This system can contribute to expanding the technically reliable database for the design activity of fusion reactor blanket, including the effects of irradiation on tensile properties. Keyword: Reduced activation ferritic/martensitic steel, Oxide dispersion strengthened steel, Post irradiation experiment, Small specimen technology, Tensile test, Strain

A case study on a fusion blanket design such as DEMO indicated that there could be some sections with high stress triaxiality, a parameter to evaluate the magnitude of plastic constraint, in the case of plasma disruption or coolant loss accident. Therefore, it is necessary to accurately understand the ductility loss limit of structural material in order to conduct the structural design assessment of the irradiated and embrittled fusion reactor blanket. Tensile tests were conducted by using three kinds of tensile specimen shapes to investigate of the plastic deformability of F82H. From the results, the fracture ductility is lower as the stress triaxiality is higher. Voids of the interrupted RB1 specimen were observed along grain boundaries and expanded parallel to the tensile axis. That of interrupted R0.2 specimen was rounded shape compared with those of RB1. The fracture surface of RB1 and R0.2 specimens were observed the elongated dimples and the equiaxed dimples without so much elongation, respectively. It is considered that the decrease of plastic deformability for the notched specimen was caused by the process of voids formation and crack growth due to the effect of plastic constraint of the notch.

Reduced activation ferritic/martensitic (RAFM) steels are promising candidate for structural material of tritium breeding blanket in a fusion reactor. Database accumulation and definition of design criteria for RAFM have been intensively studied together with the progress of blanket design activities. As a part of database accumulation for fusion blanket, a RAFM steel, F82H was fatigue-tested at 573 and 673 K in the air. Axial strain-controlled fatigue tests were carried out with a cylindrical specimen with 8 mm of diameter with -1 of strain ratio condition in accordance with Japanese Industrial Standard, JIS Z 2279, “Method of high-temperature low cycle fatigue testing for metallic materials.” For high cycle tests, the maximum test cycles exceeded 106 cycles. Fatigue lifetime of F82H at temperatures ranging from room temperature to 673 K fell into the factor of 2 of the empirical fitting curve for 673 K. It was studied using experimental results that fatigue-related design limit based on RCC-MRx, such as fatigue design curves, half-life cyclic curves, and related coefficients.

The small specimen tensile test is commonly used as the basic test to evaluate the irradiation effect on the strength of fusion structural materials after irradiation, and a lot of attempts were made to qualify the data obtained by small size specimen, but the specific attention on the evaluation of strain were not satisfactory given. This study therefore aims to propose a novel non-contact strain measurement technique, based on digital image correlation (DIC) method, for reduced-activation ferritic/martensitic (RAFM) steel, e.g., F82H, as the leading candidate structural material of fusion in-vessel components in Japan. A flat rectangular miniature specimen, e.g., SS-J3 type, was adopted to evaluate non-irradiated and neutron-irradiated tensile properties. In the proposed DIC, very tiny surface machining flaws were recognized by the DIC computation program and utilized to set several pairs of the gauge end points with a fixed gauge length. In case of the room-temperature test, it was clearly demonstrated that this procedure could provide more precise and reliable data compared with the previous approach of the single-scan measurement under floated gauge length. Superior linearity was achieved and recognized DIC points of concern were traceable during the entire period of the test. By applying this technique, superior high-dose stability of elastic properties of F82H was first demonstrated.