Search

Dialkylmagnesium compounds (MgR2, R = C2H5, C4H9 etc.,) have drawn considerable interest in recent years due to their role in commercial polymerization reactions. Herein, we report a thorough account on the reaction intermediates involved in the synthesis of di-n-butylmagnesium from anhydrous magnesium chloride and n-butyllithium. Energy-dispersive X-ray spectroscopy (EDX) and powder X-ray diffraction (PXRD) were used to characterize the products formed in transmetalation reaction and it supports that the Schlenk equilibrium between the nBuMgCl and nBu2Mg may be operating during the synthesis of di-n-butylmagnesium from anhydrous magnesium chloride. 1,4-Dioxane was used to shift the Schlenk equilibrium to form soluble 1,4-dioxane adduct of di-n-butylmagnesium and insoluble MgCl2 based product. PXRD was used to study the transformation of 1,4-dioxane adduct of di-n-butylmagnesium to pure di-n-butylmagnesium.

Metal–organic frameworks (MOFs) exhibit exceptional properties and are widely investigated because of their structural and functional versatility relevant to catalysis, separations, and sensing applications. However, their commercial or large-scale application is often limited by their powder forms which make integration into devices challenging. Here, we report the production of MOF–thermoplastic polymer composites in well-defined and customizable forms and with complex internal structural features accessed via a standard three-dimensional (3D) printer. MOFs (zeolitic imidazolate framework; ZIF-8) were incorporated homogeneously into both poly(lactic acid) (PLA) and thermoplastic polyurethane (TPU) matrices at high loadings (up to 50% by mass), extruded into filaments, and utilized for on-demand access to 3D structures by fused deposition modeling. Printed, rigid PLA/MOF composites display a large surface area (SAavg = 531 m2 g–1) and hierarchical pore features, whereas flexible TPU/MOF composites achiev...

Magnesium (Mg) has many useful applications especially in the form of various Mg alloys that can decrease weight while increasing strength compared with common steels. To increase the affordability and minimize environment consequence, a novel catalyzed organo-metathetical (COMET) process was proposed to extract Mg from seawater aiming to achieve a significant reduction in total energy and production cost compared with the melting salt electrolysis method currently adapted by US Mg LLC. A process flow sheet for a reference COMET process was set up using Aspen Plus. The energy consumption, production cost, and CO2 emissions were estimated using the Aspen economic analyzer. Our results showed that it is possible to produce Mg from seawater with a production cost of $2.0/kg-Mg while consuming about 35.6 kWh/kg-Mg and releasing 7.7 kg CO2/kg-Mg. Under the simulated conditions, the reference COMET process maintains a comparable CO2 emission rate, saves about 40% in production cost, and saves about 15% in energy consumption compared with a simplified US Mg process.

A new efficient and solvent-free method for the synthesis of anhydrous MgCl2 from its hexahydrate is presented. Fluidized dehydration of MgCl2·6H2O feedstock at 200 °C in a porous bed reactor yields MgCl2·nH2O (0 < n < 1), which has a similar diffraction pattern as activated MgCl2. The MgCl2·nH2O is then ammoniated directly using liquefied NH3 in the absence of solvent to form MgCl2·6NH3. Calcination of the hexammoniate complex at 300 °C then yields anhydrous MgCl2. Both dehydration and deammoniation were thoroughly studied using in situ as well as ex situ characterization techniques. Specifically, a detailed understanding of the dehydration process was monitored by in situ PXRD and in situ FTIR techniques where formation of salt with nH2O (n = 4, 2, 1

Injection of fluids into geologic formations for long term disposition (CO 2 ) or to improve energy extraction operations can benefit from subsurface monitoring programs capable of providing three dimensional spatial imaging of fluid distributions in the host reservoirs. More importantly, advancements in horizontal drilling and fluid fracking technologies are attracting a broader portfolio of non-traditional engineered subsurface reservoirs that possess complex fluid flow typically through engineered fracture networks. For example, producing fossil fuels from tight sands or shale formations, geothermal based heat extraction operations in low-permeability rock formations, and storing injected fluids (i.e. CO 2 , acid gases, waste waters, etc.) in the subsurface all require rigorous tracking techniques capable of identifying fluid migration. Current methodologies for four dimensional (3D spatial changes over time) subsurface monitoring of injected fluids are typically geophysical, using surface stations and borehole devices which employ seismic, electromagnetic, and gravitational techniques. However current methods often lack sufficient measurement sensitivity to adequately track fluid migration, and often incur a large economic cost. In this paper, we describe an entirely new class of acoustically responsive contrast agents to enable high-sensitivity, high-resolution tracking of injected fluids via conventional seismic imaging that have the potential of improving subsurface fracture network mapping and plume monitoring in CO 2 storage operations.

© 2017 the Owner Societies. Switchable ionic liquids (SWILs) derived from organic bases and alcohols are attractive due to their applications in gas capture, separations, and nanomaterial synthesis. However, their exact solvent structure still remains a mystery. We present the first chemical mapping of a SWIL solvent structure using in situ time-of-flight secondary ion mass spectrometry. In situ chemical mapping discovers two coexisting liquid phases and molecular structures vastly different from conventional ionic liquids. SWIL chemical speciation is found to be more complex than the known stoichiometry. Dimers and ionic clusters have been identified in SIMS spectra; and confirmed to be the chemical species differentiating from non-ionic liquids via spectral principal component analysis. Our unique in situ molecular imaging has advanced the understanding of SWIL chemistry and how this "heterogeneous" liquid structure may impact SWILs' physical and thermodynamic properties and associated applications.

In situ liquid secondary ion mass spectrometry (SIMS) enabled by system for analysis at the liquid vacuum interface (SALVI) has proven to be a promising new tool to provide molecular information at solid-liquid and liquid-vacuum interfaces. However, the initial data showed that useful signals in positive ion spectra are too weak to be meaningful in most cases. In addition, it is difficult to obtain strong negative molecular ion signals when m/z>200. These two drawbacks have been the biggest obstacle towards practical use of this new analytical approach. In this study, we report that strong and reliable positive and negative molecular signals are achievable after optimizing the SIMS experimental conditions. Four model systems, including a 1,8-diazabicycloundec-7-ene (DBU)-base switchable ionic liquid, a live Shewanella oneidensis biofilm, a hydrated mammalian epithelia cell, and an electrolyte popularly used in Li ion batteries were studied. A signal enhancement of about two orders of magnitude was obtained in comparison with non-optimized conditions. Therefore, molecular ion signal intensity has become very acceptable for use of in situ liquid SIMS to study solid-liquid and liquid-vacuum interfaces. Graphical Abstract ᅟ.

Three water adsorption-desorption mechanisms are common in inorganic materials: chemisorption, which can lead to the modification of the first coordination sphere; simple adsorption, which is reversible; and condensation, which is irreversible. Regardless of the sorption mechanism, all known materials exhibit an isotherm in which the quantity of water adsorbed increases with an increase in relative humidity. Here, we show that carbon-based rods can adsorb water at low humidity and spontaneously expel about half of the adsorbed water when the relative humidity exceeds a 50-80% threshold. The water expulsion is reversible, and is attributed to the interfacial forces between the confined rod surfaces. At wide rod spacings, a monolayer of water can form on the surface of the carbon-based rods, which subsequently leads to condensation in the confined space between adjacent rods. As the relative humidity increases, adjacent rods (confining surfaces) in the bundles are drawn closer together via capillary forces. At high relative humidity, and once the size of the confining surfaces has decreased to a critical length, a surface-induced evaporation phenomenon known as solvent cavitation occurs and water that had condensed inside the confined area is released as a vapour.

Metal-organic frameworks (MOFs) are one of the widely investigated materials of 21st century due to their unique properties such as structural tailorability, controlled porosity, and crystallinity. These exceptional properties make them promising candidates for various applications including gas adsorption and storage, separation, and catalysis. However, commercial applications of MOFs produced by conventional methods including solvothermal or hydrothermal synthesis are rather limited or restricted because they often produce fine powders. The use of MOF powders for industrial applications often results in pressure drop problems similar to the case with zeolites and limited robustness against water. To realize these materials for practical applications, densification of MOFs (by increasing pellet density) is routinely employed to form pellets, extrudates or beads to improve the overall density, volumetric adsorption, mechanical and thermal properties. However, the improvements come with some drawbacks such as reduction in overall porosity, surface area, and gravimetric adsorption capacity. Thus, optimizing the properties of densified MOF's by tuning the pellet density is very crucial for realizing these materials for industrial applications. Methods that increase the packing density in MOFs (for example by intentional interpenetration, etc.), which is different from pellet density, is not the scope of this review. In this review, the properties and applications of densified MOFs with different metal clusters and organic linkers are discussed.

The low-frequency (100-1250 Hz) acoustic properties of metal-organic framework (MOF) materials were examined in impedance tube experiments. The anomalously high sound transmission loss of HKUST-1, FeBTC, and MIL-53(Al) quantitatively demonstrated that these prototypical MOFs are absorptive acoustic metamaterials. To the best of our knowledge, this is the first example of MOFs that have been demonstrated to be acoustic metamaterials. Low-frequency acoustic dampening by subwavelength MOF metamaterials is likely due to sound dissipation and absorption facilitated by multiple internal reflections within the microporous framework structure. Modification of MIL-53(Al) with flexible organic linkers clarified that acoustic signatures of the MOFs may be tailored to add or alter certain diagnostic acoustic signatures. These results may be applied to the rational design of lightweight sound-insulating construction materials and acoustic contrast agents for subsurface mapping and monitoring applications at low frequency (100-1250 Hz).

Metal-organic frameworks (MOFs); also known as porous coordination polymers (PCP) are a class of porous crystalline materials constructed by connecting metal clusters via organic linkers. The possibility of functionalization leads to virtually infinite MOF designs using generic modular methods. Functionalized MOFs can exhibit interesting physical and chemical properties including accelerated adsorption kinetics and catalysis. Although there are discrete methods to synthesize well-defined nanoscale MOFs, rapid and flexible methods are not available for continuous, one-pot synthesis and post-synthetic modification (functionalization) of MOFs. Here, we show a continuous, scalable nanodroplet-based microfluidic route that not only facilitates the synthesis of MOFs at a nanoscale, but also offers flexibility for direct functionalization with desired functional groups (e.g., -COCH3, fluorescein isothiocyanate; FITC). In addition, the presented route of continuous manufacturing of functionalized nanosized MOFs takes significantly less time compared to state-of-the-art batch methods currently available (1 hr vs. several days). We envisage our approach to be a breakthrough method for synthesizing complex functionalized nanomaterials (metal, metal oxides, quantum dots and MOFs) that are not accessible by direct batch processing and expand the range of a new class of functionalized MOF-based functional nanomaterials.

Metal-organic heat carriers (MOHCs) are recently developed nanofluids containing metal-organic framework (MOF) nanoparticles dispersed in various base fluids including refrigerants (R245Fa) and methanol. Here, we report the synthesis and characterization of MOHCs containing nanoMIL-101(Cr) and graphene oxide (GO) in an effort to improve the thermo-physical properties of various base fluids. MOHC/GO nanocomposites showed enhanced surface area, porosity and nitrogen adsorption compared with the intrinsic nanoMIL-101(Cr) and the properties depended on the amount of GO added. MIL-101(Cr)/GO in methanol exhibited a significant increase in the thermal conductivity (by approximately 50%) relative to that of the intrinsic nanoMIL-101(Cr) in methanol. The thermal conductivity of the base fluid (methanol) was increased by about 20%. The increase in the thermal conductivity of nanoMIL-101(Cr) MOHCs due to GO functionalization is explained using a classical Maxwell model.

A redox-active metal-organic composite material shows improved and selective O2 adsorption over N2 with respect to individual components (MIL-101 and ferrocene). The O2 sensitivity of the composite material arises due to the formation of maghemite nanoparticles with the pore of the metal-organic framework material.

Metal organic frameworks (MOFs) have gained attention for their porosity, size selectivity, and structural diversity. There is a need for MOF-based coatings, particularly in applications such as separations, electronics, and energy; yet forming thin, functional, conformal coatings is prohibitive because MOFs exist as a powder. Layer-by-layer assembly, a versatile thin film coating approach, offers a unique solution to this problem, but this approach requires MOFs that are water-dispersible and bear a surface charge. Here, these issues are addressed by examining water-based dispersions of MIL-101(Cr) that facilitate the formation of robust polymer–MOF hybrid coatings. Specifically, the substrate to be coated is alternately exposed to an aqueous solution of poly(styrene sulfonate) and nano MIL-101(Cr) dispersion, yielding linear film growth and coatings with a MOF content as high as 77 wt%. This approach is surface-agnostic, in which the coating is successfully applied to silicon, glass, flexible plastic, and even cotton fabric, conformally coating individual fibers. By contrast, prior attempts at forming MOF-coatings are severely limited to a handful of surfaces, require harsh chemical treatment, and are not conformal. The approach presented here unambiguously confirms that MOFs can be conformally coated onto complex and unusual surfaces, opening the door for a wide variety of applications.

Synthetic nanoparticles are emerging as versatile tools in biomedical applications, particularly in the area of biomedical imaging. Nanoparticles 1 - 100 nm in diameter have dimensions comparable to biological functional units. Diverse surface chemistries, unique magnetic properties, tunable absorption and emission properties, and recent advances in the synthesis and engineering of various nanoparticles suggest their potential as probes for early detection of diseases such as cancer. Surface functionalization has expanded further the potential of nanoparticles as probes for molecular imaging.To summarize emerging research of nanoparticles for biomedical imaging with increased selectivity and reduced nonspecific uptake with increased spatial resolution containing stabilizers conjugated with targeting ligands.This review summarizes recent technological advances in the synthesis of various nanoparticle probes, and surveys methods to improve the targeting of nanoparticles for their application in biomedical imaging.Structural design of nanomaterials for biomedical imaging continues to expand and diversify. Synthetic methods have aimed to control the size and surface characteristics of nanoparticles to control distribution, half-life and elimination. Although molecular imaging applications using nanoparticles are advancing into clinical applications, challenges such as storage stability and long-term toxicology should continue to be addressed.

A highly crystalline LiCoPO4/C cathode material has been synthesized without noticeable impurities via a single step solid-state reaction using CoHPO4·xH2O nanoplate as a precursor obtained by a simple precipitation route. The LiCoPO4/C cathode delivered a specific capacity of 125 mAhg−1 at a charge/discharge rate of C/10. The nanoplate precursor and final LiCoPO4/C cathode have been characterized using X-ray diffraction, thermogravimetric analysis − differential scanning calorimetry (TGA-DSC), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) and the electrochemical cycling stability has been investigated using different electrolytes, additives and separators.