Search

One-dimensional (1D)–two-dimensional (2D) van der Waals (vdWs) mixed-dimensional heterostructures with advantages of an atomically sharp interface, high quality and good compatibility have attracted tremendous attention in recent years. Herein, a mixed-dimensional vertical heterostructure is constructed by transferring mechanically exfoliated 2D WS2 nanosheets on epitaxially grown 1D tellurium (Te) microwires. According to the theoretical type-II band alignment, the device exhibits a photovoltaic effect and serves as an excellent self-powered photodetector with a maximum open-circuit voltage (Voc) up to ∼0.2 V. Upon 635 nm light illumination, the photoresponsivity, external quantum efficiency and detectivity of the self-powered photodetector (SPPD) are calculated to be 471 mA W−1, 91% and 1.24 × 1012 Jones, respectively. Moreover, the dark current of the SPPD is highly suppressed to the sub-pA level due to the large lateral built-in electric field, which leads to a high Ilight/Idark ratio of 104 with a rise time of 25 ms and decay time of 14.7 ms. The abovementioned properties can be further enhanced under a negative bias of −2 V. In brief, the 1D Te–2D WS2 mixed-dimensional heterostructures have great application potential in high performance photodetectors and photovoltaics.

Based on the theoretical analysis and abundant experiments, a fiber combiner terminated with a quartz block head (QBH) with an output power of 3218 W and transmission efficiency higher than 98% is fabricated successfully by choosing a fiber with a larger core diameter of 600 μm and numerical aperture (NA) of 0.22 which matches the NA of the end cap as the output fiber of combiner. The proposed fiber combiner terminated with QBH can be used for fiber delivered direct beam combining of laser diodes with lower cost and higher wall-plug efficiency compared with fiber laser.