Search

Molecular photoswitches capable of generating precise pH changes will allow pH-dependent processes to be controlled remotely and noninvasively with light. We introduce a series of new merocyanine photoswitches, which deliver reversible bulk pH changes up to 3.2 pH units (pH 6.5 to pH 3.3) upon irradiation with 450 nm light, displaying tunable and predictable timescales for thermal recovery. We present models to show that the key parameters for optimizing the bulk pH changes are measurable: the solubility of the photoswitch, the acidity of the merocyanine form, the thermal equilibrium position between the spiropyran and the merocyanine isomers, and the increased acidity under visible light irradiation. Using ultrafast transient absorption spectroscopy, we determined the quantum yields for the ring-closing reaction and found that the lifetimes of the transient cis-merocyanine isomers ranged from 30 to 550 ns. Quantum yields did not appear to be a limitation for bulk pH switching. The models we present use experimentally determined parameters and are, in principle, able to predict the change in pH obtained for any related merocyanine photoacid.

A water soluble diarylethene (DAE) derivative that displays exceptionally intense fluorescence from the colorless open form has been synthesized and characterized using UV/vis spectroscopy and fluorescence microscopy. We show that the bright emission from the open form can be rapidly switched using amplitude modulated red light, that is, by light at wavelengths longer than those absorbed by the fluorescent species. This is highly appealing in any context where undesired background fluorescence disturbs the measurement, e.g., the autofluorescence commonly observed in fluorescence microscopy. We show that this scheme is conveniently applicable using lock-in detection, and that robust amplitude modulation of the probe fluorescence is indeed possible also in cell studies using fluorescence microscopy., A water soluble diarylethene derivative displaying exceptionally bright fluorescence in the open isomeric form has been used for emission amplitude-modulation. We apply this scheme in fluorescence microscopy, aiming to suppress undesired background.

The reaction of 4,4′,4′′,4′′′-(ethene-1,1,2,2-tetrayl)tetraaniline with 2-pyridinecarboxaldehyde and iron(II) chloride resulted, after aqueous workup, in the diastereoselective formation of an [Fe 2 L 3 ] 4+ triple-stranded helicate structure, irrespective of the stoichiometry employed. The helicate structure was characterized in solution by multinuclear NMR spectroscopy, and in the solid state by single-crystal X-ray crystallography. The reaction of iron(II) tetrafluoroborate or iron(II) bistriflimide with the tetraaniline and 2-pyridinecarboxaldehyde allowed the formation of an [Fe 8 L 6 ] 16+ cube when the appropriate stoichiometry was used, but these structures were unstable with respect to hydrolysis. The pendant amine groups on the helicate can be functionalized by reaction with acid chlorides or anhydrides, and the resulting functionalized tetraphenylethene (TPE) units were isolated by the reaction of the helicate with tris(2-aminoethyl)amine. The emission properties of the TPE units were studied in THF/water mixtures, and they were found by dynamic light scattering to self-assemble into large (av. diameter 250 nm) structures.

The underlying role that many kinases play in complex cellular pathways as well as disease remains unclear. To better understand the role that kinases play in both health and disease states, the use of light as an external stimulus to modulate kinase activity with high spatiotemporal resolution has gained increasing interest over the years. Herein we highlight the progress made towards the development of light-responsive kinase enzymes and small molecule inhibitors. In these examples, photolabile caging groups and photoswitchable entities have been utilised to modulate either kinase activation or inhibition in a light-controlled manner.

The combination of two two-photon-induced processes in a Förster resonance energy transfer (FRET)-operated photochromic fluorene-dithienylethene dyad lays the foundation for the observation of a quartic dependence of the fluorescence signal on the excitation light intensity. While this photophysical behavior is predicted for a four-photon absorbing dye, the herein proposed approach opens the way to use two-photon absorbing dyes, reaching the same performance. Hence, the spatial resolution limit, being a critical parameter for applications in fluorescence imaging or data storage with common two-photon absorbing dyes, is dramatically improved.

International audience; The binding of donor-acceptor Stenhouse adducts (DASAs) bearing hydrogenbond recognition groups by Hamilton-type receptors significantly influenced their photoswitching properties by altering thermal barriers to isomerization. The thermal barrier between the most stable linear isomer and the photo-generated isomer is lowered on binding to a receptor, and this barrier is crucial for switching properties. The thermal isomerization was shown to proceed via a stepwise linear-enol-keto mechanism in DMSO where the barrier to tautomerisation is within 2 kJ•mol-1 of that of the rate-determining step, which may be important for analyzing switching properties.

The photo- and acidochromic properties of a new generation norbornadiene derivative have been harnessed for the realization of a three-input keypad lock, where a specific sequence of inputs induces a unique output. Reversible quadricyclane/norbornadiene photoisomerization is reported, and this rare feature allows the first example of a norbornadiene-based molecular logic system. The function of this system is clearly rationalized in terms of the interconversion scheme and the absorption spectra of the involved species.

The idea of using molecules in the context of information security has sparked the interest of researchers from many scientific disciplines. This is clearly manifested in the diversity of the molecular platforms and the analytical techniques used for this purpose, some of which we highlight in this Tutorial Review. Moreover, those molecular systems can be used to emulate a broad spectrum of security measures. For a long time, molecular keypad locks enjoyed a clear preference and the review starts off with a description of how these devices developed. In the last few years, however, the field has evolved into something larger. Examples include more complex authentication protocols (multi-factor authentication and one-time passwords), the recognition of erroneous procedures in data transmission (parity devices), as well as steganographic and cryptographic protection.

A series of photochromic diarylmaleimide derivatives has been synthesized and studied with respect to the photochromic properties in aqueous solution. The main rationale is to investigate if these compounds could be used as photoswitchable units in biological contexts, motivated by the fact that the diarylmaleimide structural motif is identified in many pharmacophores. Thus, photoswitchable variants of this class of compounds could be very useful in the quest for photoactivatable drugs. The photoinduced cyclization reaction (colorization) is suppressed in solvents of high polarity, whereas the ring-opening reaction (decolorization) still occurs with high efficiency. The photochromically active anti-parallel conformer of the open form is more abundant in the asymmetrically substituted derivatives, which in turn favors the formation of the closed isomeric form. The rates of the thermal isomerization reactions have also been assessed, together with the resistance toward thermal degradation. Here it was observed that the maleimide derived compounds were not susceptible to the thermally driven reactions (hydrolysis and isomerization).

Photochromic molecules undergo reversible isomerization upon irradiation with light at different wavelengths, a process that can alter their physical and chemical properties. For instance, dihydropyrene (DHP) is a deep-colored compound that isomerizes to light-brown cyclophanediene (CPD) upon irradiation with visible light. CPD can then isomerize back to DHP upon irradiation with UV light or thermally in the dark. Conversion between DHP and CPD is thought to proceed via a biradical intermediate; bimolecular events involving this unstable intermediate thus result in rapid decomposition and poor cycling performance. Here, we show that the reversible isomerization of DHP can be stabilized upon confinement within a (PdIIL4)-L-6 coordination cage. By protecting this reactive intermediate using the cage, each isomerization reaction proceeds to higher yield, which significantly decreases the fatigue experienced by the system upon repeated photocycling. Although molecular confinement is known to help stabilize reactive species, this effect is not typically employed to protect reactive intermediates and thus improve reaction yields. We envisage that performing reactions under confinement will not only improve the cyclic performance of photochromic molecules, but may also increase the amount of product obtainable from traditionally low-yielding organic reactions.

Three visible-light responsive photoswitches are reported, azobis(1-methyl-benzimidazole) (1), azobis(benzoxazole) (2) and azobis(benzothiazole) (3). Photostationary distributions are obtained upon irradiation with visible light comprising approximately 80 % of the thermally unstable isomer, with thermal half-lives up to 8 min and are mostly invariant to solvent. On protonation, compound 1H+ has absorption extending beyond 600 nm, allowing switching with yellow light, and a thermal half-life just under 5 minutes. The two isomers have significantly different pKa values, offering potential as a pH switch. The absorption spectra of 2 and 3 are insensitive to acid, although changes in the thermal half-life of 3 indicate more basic intermediates that significantly influence the thermal barrier to isomerization. These findings are supported by high-level ab initio calculations, which validate that protonation occurs on the ring nitrogen and that the Z isomer is more basic in all cases.

In this Review the use of light to address stimuli-responsive molecular and supramolecular systems with applications in information processing and binary logic is discussed. Molecular photoswitches are at the focal point of the herein summarized works. Light offers great advantages in terms of spatiotemporal control and remote triggering. As an additional surplus, excited state processes, such as energy- and electron-transfer can be precisely designed such that photoswitchable systems yield the desired logic operation or function. As opposed to chemical signals, photons are traceless reagents, enabling the recycled operation and reconfiguration of the discussed devices. The herein in an account-style summarized examples provide an overview of merging photoswitching with information processing, hopefully serving as a starting point for further research in this exciting field.

The responses of DNA origami conformation to UV radiation of different wavelengths and doses are investigated. Short- and medium-wavelength UV light can cause photo-lesions in DNA origami. At moderate doses, the lesions do not cause any visible defects in the origami, nor do they significantly affect the hybridization capability. Instead, they help relieve the internal stress in the origami structure and restore it to the designed conformation. At high doses, staple dissociation increases which causes structural disintegration. Long-wavelength UV does not show any effect on origami conformation by itself. We show that this UV range can be used in conjunction with photoactive molecules for photo-reconfiguration, while avoiding any damage to the DNA structures.

Photochromic [Pd2L4] coordination cages based on dithienylethene (DTE) ligands L allow triggering guest uptake and release by irradiation with light of different wavelengths. The process involves four consecutive electrocyclic reactions to convert all chromophores between their open and closed photoisomeric forms. So far, guest affinity of the fully switched species was elucidated, but mechanistic details concerning the intermediate steps remained elusive. Now, a new member of the DTE cage family allows unprecedented insight into the interplay between photoisomerization steps and guest location inside/outside the cavity. Therefore, the intrinsic chirality of the DTE backbones was used as reporter for monitoring the fate of a chiral guest. In its "open" photoisomeric form ( o-L, [Pd2( o-L)4] = o-C), the C2-symmetric DTE chromophore quickly converts between energetically degenerate P and M helical conformations. After binding homochiral 1 R-( -) or 1 S-( +) camphor sulfonate ( R-CSA or S-CSA), guest-to-host chirality transfer was observed via a circular dichroism (CD) signal for the cage-centered absorption. Irradiating the R/S-CSA@ o-C host-guest complexes at 313 nm produced configurationally stable "closed" photoisomers, thus locking the induced chirality with an enantiomeric excess close to 25%. This value (corresponding to chiral induction for one out of four ligands), together with DOSY NMR, ion mobility mass spectrometry, and X-ray structure results, shows that closure of the first photoswitch is sufficient to expel the guest from the cavity.

DNA binding modes of the stereoisomeric rotamers of two dithenylethene derivatives (DTE1 and DTE2) representing candidate molecular photoswitches of great promise for photopharmacology and nanotechnology have been identified and characterized in terms of their binding energies and electronic circular dichroism (CD) responses. In the open form, two binding modes are identified namely minor-groove binding of the lowest-energy conformer with an anti-parallel arrangement of methyl groups and major-groove double-intercalation of the P-enantiomers of an intermediate-state rotamer. Only the latter binding mode is found to be enantiomerically selective and expected to have an overall negative linear dichroism (LD) as observed in the experiment for DTE1 (Angew. Chem., Int. Ed., 2013, 52, 4393). In the closed form, the most favorable binding mode is found to be minor groove binding. Also this binding mode is found to be enantiomerically selective and for DTE1, it is the M-enantiomer that binds the strongest, showing a positive theoretical signature CD band in the long wavelength region with origin in pyridinium ligands. The theoretical CD spectrum is found to be in good agreement with the experimental one, which provides an indirect evidence for a correct identification of the binding mode in the closed form.

Photochromic molecules from the spiropyran family are known to undergo light-induced interconversion between the colorless spiro- and the colored merocyanine forms. Here, we show for the first time that small structural modifications open up for an additional photoisomerization mode: reversiblecis–transisomerization of the merocyanine. Moreover, the introduction of a photocage allows for light-activated switching between the two modes.

A set of azoheteroarenes have been synthesized with Buchwald-Hartwig coupling and microwave-assisted O2 oxidation as the key steps. Several compounds exhibit good to excellent photoswitching properties (high switching efficiency, good fatigue resistance, and thermal stability of Z-isomer) relevant for photocontrolled applications, which pave the way for use in photopharmacology.

The photo-controlled shift of pH titration curves, describing the acidochromic behaviour of a spiropyran switch network, was harnessed for the realisation of a molecular triode. The intricate network can be correctly interpreted with respect to the pH dependence of the main involved species.

Two amidine-substituted spiropyran derivatives have been characterized with respect to the DNA-binding properties over a broad pH interval. The two derivatives differ in the number of positive charges. By varying the pH, the protonation state of the derivatives is also changed, allowing for additional variations in the charge distribution. We show that the closed spiro isomer does not bind for either of the two derivatives, whereas the open merocyanine forms bind both in the protonated and in the nonprotonated state, but with dramatically different binding constants. Flow-oriented linear dichroism (LD) measurements also show that there are differences in the binding modes between the various forms. We rationalize these differences in terms of structure and charge distribution.

Six water-soluble spiropyran derivatives have been characterized with respect to the thermal and photoinduced reactions over a broad pH-interval. A comprehensive kinetic model was formulated including the spiro- and the merocyanine isomers, the respective protonated forms, and the hydrolysis products. The experimental studies on the hydrolysis reaction mechanism were supplemented by calculations using quantum mechanical (QM) models employing density functional theory. The results show that (1) the substitution pattern dramatically influences the pKa-values of the protonated forms as well as the rates of the thermal isomerization reactions, (2) water is the nucleophile in the hydrolysis reaction around neutral pH, (3) the phenolate oxygen of the merocyanine form plays a key role in the hydrolysis reaction. Hence, the nonprotonated merocyanine isomer is susceptible to hydrolysis, whereas the corresponding protonated form is stable toward hydrolytic degradation.

Herein, we report the first example of one-time password (OTP) generation and two-factor authentication (2FA) using a molecular approach. OTPs are passwords that are valid for one entry only. For the next login session, a new, different password is generated. This brings the advantage that any undesired recording of a password will not risk the security of the authentication process. Our molecular realization of the OTP generator is based on a photochromic molecular triad where the optical input required to set the triad to the fluorescent form differs depending on the initial isomeric state.

DNA origami has received enormous attention for its ability to program complex nanostructures with a few nanometer precision. Dynamic origami structures that change conformation in response to environmental cues or external signals hold great promises in sensing and actuation at the nanoscale. The reconfiguration mechanism of existing dynamic origami structures is mostly limited to single-stranded hinges and relies almost exclusively on DNA hybridization or strand displacement. Here, we show an alternative approach by demonstrating on-demand conformation changes with DNA-binding molecules, which intercalate between base pairs and unwind DNA double helices. The unwinding effect modulates the helicity mismatch in DNA origami, which significantly influences the internal stress and the global conformation of the origami structure. We demonstrate the switching of a polymerized origami nanoribbon between different twisting states and a well-constrained torsional deformation in a monomeric origami shaft. The structural transformation is shown to be reversible, and binding isotherms confirm the reconfiguration mechanism. This approach provides a rapid and reversible means to change DNA origami conformation, which can be used for dynamic and progressive control at the nanoscale.

Information processing at the molecular level is coming of age. Since the first molecular AND gate was proposed about 20 years ago, the molecular interpretation of binary logic has become vastly more sophisticated and complex. However, the field is also at a crossroads. While cleverly designed molecular building blocks are abundant, difficult questions remain. How can molecular components be flexibly assembled into larger circuits, and how can these components communicate with one another. The concept of all-photonic switching with photochromic supermolecules has shown some interesting potential and is discussed in this review. Although the field of molecular logic was originally discussed mainly in terms of a technology that might compete with solid-state computers, potential applications have expanded to include clever molecular systems and materials for drug delivery, sensing, probing, encoding, and diagnostics. These upcoming trends, which are herein illustrated by selected examples, deserve general attention.

Photochromes are chromophores that are reversibly isomerized between two metastable forms using light, or light and heat. When photochromes are covalently linked to other chromophores, they can act as molecular photonic analogues of electronic transistors. As bistable switches, they can be incorporated into the design of molecules capable of binary arithmetic and both combinatorial and sequential digital logic operations. Small ensembles of such molecules can perform analogue signal modulation similar to that carried out by transistor amplifiers. Examples of molecules that perform multiple logic functions, act as control elements for fluorescent reporters, and mimic natural photoregulatory functions are presented.

The photochromic fluorescence switching of a fulgimide derivative was used to implement the first molecule-based D (delay) flip-flop device, which works based on the principles of sequential logic. The device operates exclusively with photonic signals and can be conveniently switched in repeated cycles. © 2011 American Chemical Society.

Proto-oncogene tyrosine-protein kinase receptor RET is implicated in the development and maintenance of neurons of the central and peripheral nervous systems. Attaching activity-compromising photocleavable groups (caging) to inhibitors could allow for external spatiotemporally controlled inhibition using light, potentially providing novel information on how these kinase receptors are involved in cellular processes. Here, caged RET inhibitors were obtained from 3-substituted pyrazolopyrimidine-based compounds by attaching photolabile groups to the exocyclic amino function. The most promising compound displayed excellent inhibitory effect in cell-free, as well as live-cell assays upon decaging. Furthermore, inhibition could be efficiently activated with light in vivo in zebrafish embryos and was shown to effect motoneuron development.

We show that FRET between Pacific Blue (PB) and Alexa488 (A488) covalently attached to a DNA scaffold can be reversibly controlled by photochromic switching of a spiropyran derivative. With the spiropyran in the closed spiro isomeric form, FRET occurs freely between PB and A488. UV-induced isomerization to the open merocyanine form shuts down the FRET process by efficient quenching of the PB excited state. The process is reversed by exposure to visible light, triggering the isomerization to the spiro isomer.

The function of a parity generator/checker, which is an essential operation for detecting errors in data transmission, has been realized with multiphotochromic switches by taking advantage of a neuron-like fluorescence response and reversible light-induced transformations between the implicated isomers.

The interactions between anionic or zwitterionic liposomes and a water-soluble, DNA-binding photochromic spiropyran are studied using UV/vis absorption and linear dichroism (LD) spectroscopy. The spectral characteristics as well as the kinetics of the thermal isomerization process in the absence and presence of the two different liposome types provide information about the environment and whether or not the spiropyran resides in the liposome membrane. By measuring LD on liposomes deformed and aligned by shear flow, further insight is obtained about interaction and binding geometry of the spiropyran at the lipid membranes. We show that the membrane interactions differ between the two types of liposomes used as well as the isomeric forms of the spiropyran photoswitch.

Guiding light: Enantioselectivity is obtained for the photocyclization of a photochromic dithienylethene when isomerization is carried out in the presence of DNA (see scheme). Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A nitrospiropyran, which was modified with a cadaverine-derived anchor, was investigated with respect to its thermally induced isomerizations, hydrolytic stability of the merocyanine form, and photochromic ring closure. The host-guest complexation of the anchor by the cucurbit[7]uril macrocycle, evidenced by absorption titration, NMR spectroscopy, and electrospray ionization mass spectrometry, produced significant improvements of the switching properties of the photochrome: 1) appearance of the merocyanine form about 70 times faster, 2) practically unlimited hydrolytic stability of the merocyanine (two and a half days without any measureable decay), and 3) fast, clean, and fatigue-resistant photoinduced ring closure back to the spiro form. The importance of an adequate molecular design of the anchor was demonstrated by including control experiments with spiropyrans with a shorter linker or without such structural asset.

In this work we present a novel water soluble spiropyran photoswitch that can be photonically activated inside live cells from a form that has no significant effect on the cellular survival to a form that induces a dramatic toxic response.

Photochromic spiropyrans modified with fluorophores were investigated as molecular platforms for the achievement of fluorescence switching through modulation of energy transfer. The dyads were designed in such a way that energy transfer is only observed for the open forms of the photochrome (merocyanine and protonated merocyanine), whereas the closed spiropyran is inactive as an energy acceptor. This was made possible through a deliberate choice of fluorophores (4-amino-1,8-naphthalimide, dansyl, and perylene) that produce zero spectral overlap with the spiro form and considerable overlap for the merocyanine forms. From the Forster theory, energy transfer is predicted to be highly efficient and in some cases of 100 % efficiency. The combined switching by photonic (light of λ>530 nm) and chemical (base) inputs enabled the creation of a sequential logic device, which is the basic element of a keypad lock. Furthermore, in combination with an anthracene-based acidochromic fluorescence switch, a reversible logic device was designed. This enables the unambiguous coding of different input combinations through multicolour fluorescence signalling. All devices can be conveniently reset to their initial states and repeatedly cycled.

Photochromes are photoswitchable, bistable chromophores which, like transistors, can implement binary logic operations. When several photochromes are combined in one molecule, interactions between them such as energy and electron transfer allow design of simple Boolean logic gates and more complex logic devices with all-photonic inputs and outputs. Selective isomerization of individual photochromes can be achieved using light of different wavelengths, and logic outputs can employ absorption and emission properties at different wavelengths, thus allowing a single molecular species to perform several different functions, even simultaneously. Here, we report a molecule consisting of three linked photochromes that can be configured as AND, XOR, INH, half-adder, half-subtractor, multiplexer, demultiplexer, encoder, decoder, keypad lock, and logically reversible transfer gate logic devices, all with a common initial state. The system demonstrates the advantages of light-responsive molecules as multifunctional, reconfigurable nanoscale logic devices that represent an approach to true molecular information processing units.

A novel molecular system with characteristics of an OFF-ON-OFF fluorescence switch was designed to integrate the function of a T-latch. In detail, a receptor(1)-fluorophore-receptor(2) architecture was adopted to achieve fluorescence switching upon addition of protons.

A spiropyran photoswitch is activated using UV light and protons from a form that shows no interaction with DNA to a form that binds to DNA by intercalation. This scheme is interpreted as a biologically relevant logic AND gate with potential applications as a dually controlled anticancer drug.

Looking without touching: The light-controlled isomerization of a complex containing a pyridine-appended dithienylethene (DTE; green) and a porphyrin dimer induces dramatic structural and spectral changes (see picture). These changes are monitored In a region outside the photochromically active absorption bands of DTE, therefore allowing a nondestructive readout so that the process functions as a molecular optically controlled memory. (Figure Presented) © 2010 Wiley-VCH Verlag GmbH and Co. KGaA www.angewandte.org.

Molecular logic is an interdisciplinary research field, which has captured worldwide interest. This tutorial review gives a brief introduction into molecular logic and Boolean algebra. This serves as the basis for a discussion of the state-of-the-art and future challenges in the field. Representative examples from the most recent literature including adders/subtractors, multiplexers/demultiplexers, encoders/decoders, and sequential logic devices (keypad locks) are highlighted. Other horizons, such as the utility of molecular logic in bio-related applications, are discussed as well.

An all photonic molecular keypad lock with a reset capacity, that is capable of distinguishing one two-digit code out of eight possible combinations were described. The synthesis and characterization of triad 1 with distilled 2-methyltetrahydrofuran as the solvent for spectroscopic measurement were reported, where the samples were degassed by size freeze-pump-thaw cycles to a final pressure. The functional principle of a keypad lock is that it gives an output signal only when given the correct inputs in the correct order, also the capacity of the triad to perform as a two-input PAND gate with reset capacity are considered. The keypad lock is found to be operated by five optical signals in the UV region including fluorescence emission that signals the actual opening of the lock, which can also be used numerous times without ant photodegradation affecting the performance.

The dramatically different DNA-binding properties of the two isomeric forms of a photochromic spiropyran have been demonstrated, enabling photoswitched DNA binding. The closed, UV-absorbing form shows no signs of interaction with DNA. Upon UV exposure the spiropyran is isomerized to the open form that binds to DNA by intercalation. The process is fully reversible as the corresponding dissociation process is induced by visible light.

Photochromic switches fulfill the general molecular design criteria for the surprisingly straightforward small-scale integration of seemingly complex set-reset latches. The implications of this re-interpretation are discussed with the example of a dithienylethene photochrome. The concept is shown to be valid for a multitude of well-introduced bistable switches with clearly differentiated output signals, e.g., optical signals for the presented example.

The development of a fluorescent LCK inhibitor that exhibits favourable solvatochromic properties upon binding the kinase is described. Fluorescent properties were realised through the inclusion of a prodan‐derived fluorophore into the pharmacophore of an ATP‐competitive kinase inhibitor. Fluorescence titration experiments demonstrate the solvatochromic properties of the inhibitor, in which dramatic increase in emission intensity and hypsochromic shift in emission maxima are clearly observed upon binding LCK. Microscopy experiments in cellular contexts together with flow cytometry show that the fluorescence intensity of the inhibitor correlates with the LCK concentration. Furthermore, multiphoton microscopy experiments demonstrate both the rapid cellular uptake of the inhibitor and that the two‐photon cross section of the inhibitor is amenable for excitation at 700 nm., A fluorescent LCK inhibitor has been obtained through the conjugation of a prodan‐derived fluorophore to the pharmacophore of an ATP‐competitive kinase inhibitor. Fluorescence titration experiments demonstrate the favourable solvatochromic properties of the inhibitor upon binding the kinase. Microscopy and flow cytometry experiments demonstrate that the fluorescence intensity of the inhibitor correlates with LCK concentration.