Search

AZ31 magnesium alloy sheets were A-TIG-welded through a coating of flux, which contained different ratios of Ce powder and nano-sized SiC as reinforcement particles and equal mass of TiO2 as activating fluxes. The microscopic analysis results illustrated that relatively low content of Ce in the reinforcement particles caused the formation of Al3Ce precipitates and refined the grains of α-Mg phase together with β-Mg17Al12 and SiC particles. The increase in microhardness and ultimate tensile strength of the joints was 6.2% and 19.2%, respectively, when reinforcement particles contain 20 wt% Ce compared to the joints coated without Ce. By studying the electrochemical test results, when using 20 wt% Ce + 80 wt% SiC as reinforcement particles, the corrosion current density was the lowest and the corrosion resistance reached the largest value, reflecting the improvement of corrosion property of the joint affected by Ce element.

Cu-Cu joints bonded by nano-copper pastes with different amounts of phenolic resin were developed at a low temperature (240°C) and a low pressure (1 MPa). The shear strengths of the joints were measured and the bonding layers were observed by scanning electron microscopy. The electrical conductivity of the joints was tested by a parameter analyzer. The results indicated that 2% phenolic resin in the pastes doubled the shear strength of Cu-Cu joints compared to joints made with 0%, 5% and 8% phenolic, because it filled the voids and coated sintered Cu nanoparticles in the joints without affecting the electrical conductivity of the Cu-Cu joint. This was because 2% phenolic paste prevented Cu nanoparticles from oxidation. However, 8% phenolic resin led to an increase of electrical resistivity due to the insulating property of phenolic resin, and a decrease of shear strength due to the hindrance to sintering between the nanoparticles.

Dopamine (DA), with strong adhesion to metal substrate via self-polymerization reaction, was introduced as a versatile template layer for subsequent polyether imide (PEI) deposition to confer a highly robust coating on AZ31 magnesium alloy. The complicated corrosion behaviour of the coating was disclosed and investigated by employing electrochemical impedance spectroscopy (EIS) coupled with equivalent electrical circuits (EECs) analysis. The results showed that the hybrid PEI/PDA coating exhibited evidently higher retardation performance (up to 35 days) after immersing in 3.5 wt.% NaCl solution compared to PDA or PEI coated Mg.