Search

Microplastics are a widespread contaminant found not only in various natural habitats but also in drinking waters. With spectroscopic methods, the polymer type, number, size, and size distribution as well as the shape of microplastic particles in waters can be determined, which is of great relevance to toxicological studies. Methods used in studies so far show a huge diversity regarding experimental setups and often a lack of certain quality assurance aspects. To overcome these problems, this critical review and consensus paper of 12 European analytical laboratories and institutions, dealing with microplastic particle identification and quantification with spectroscopic methods, gives guidance toward harmonized microplastic particle analysis in clean waters. The aims of this paper are to (i) improve the reliability of microplastic analysis, (ii) facilitate and improve the planning of sample preparation and microplastic detection, and (iii) provide a better understanding regarding the evaluation of already existing studies. With these aims, we hope to make an important step toward harmonization of microplastic particle analysis in clean water samples and, thus, allow the comparability of results obtained in different studies by using similar or harmonized methods. Clean water samples, for the purpose of this paper, are considered to comprise all water samples with low matrix content, in particular drinking, tap, and bottled water, but also other water types such as clean freshwater., B. E. Oßmann thanks the Bavarian State Ministry of the Environment and Consumer Protection for funding the projects “Detection of microplastics in selected foods” and “Expansion of the analytics of microplastics in food.” S. Lacorte acknowledges funding from the Ministry of Science and Innovation of Spain (project PID2019-105732GB-C21). J. Weisser, K. Glas, T. Hofmann, N. P. Ivleva, and E. von der Esch receive funding from the Bavarian Research Foundation (Bayerische Forschungsstiftung (BFS), AZ-1258-16 (“MiPAq”). N. P. Ivleva thanks the Federal Ministry of Education and Research (Bundesministerium für Bildung und Forschung (BMBF), projects 02WPL1443A “SubμTrack” and 03F0851B “HOTMIC”) for financial support. D. Fischer and F. Fischer acknowledge funding from the projects MicroCatch_Balt, PLASTRAT, PLAWES by the BMBF in the call “Plastics in the environment,” as well as from the BONUS BLUE BALTIC project MICROPOLL, which has received funding from BONUS (Art 185), funded jointly by the EU and the BMBF. N. Zumbülte and C. S. Witzig acknowledge funding by the BMBF of the project “MicBin.”

Determining microplastics in environmental samples quickly and reliably is a challenging task. With a largely automated combination of optical particle analysis, Fourier transform infrared (FT-IR), and Raman microscopy along with spectral database search, particle sizes, particle size distributions, and the type of polymer including particle color can be determined. We present a self-developed, open-source software package for realizing a particle analysis approach with both Raman and FT-IR microspectroscopy. Our software GEPARD (Gepard Enabled PARticle Detection) allows for acquiring an optical image, then detects particles and uses this information to steer the spectroscopic measurement. This ultimately results in a multitude of possibilities for efficiently reviewing, correcting, and reporting all obtained results.

The treatment of samples for microplastic (MP) analysis requires purification steps that sufficiently reduce the non-MP content while preserving the targeted particles integrity. Besides their macromolecular structure this also encompasses their in situ numbers and sizes. However, any step of sample manipulation will come at a cost: particle loss, fragmentation, coagulation or degradation may lead to distorted results, predominantly in the smaller fraction of the MP size range. Therefore, the evaluation of MP resistivity against applied methods such as chemical digestions is a vital criterion for obtaining meaningful results on MP content of a sample. We developed a framework to test the applicability of MP purification methods and apply it to four protocols commonly used to prepare environmental samples for MP particle identification. The approach was designed for MP particles being too small to be handled manually (i.e. 10–70 μm). The evaluation consists of a two-tiered assay: a simple particle suspension approach is used to confirm a post-treatment qualitative recognisability of the target polymers by the analysis method of choice (here Raman and FTIR). In a following quantitative part, immobilised particles are used to evaluate the preservation of particle numbers and areas after the treatment on an individual particle level. A Python image analysis package was written that identifies, matches and measures particles on pairs of pre- and post-treatment images, and is available as open source software. Our results show that the chemical digestions using hydrogen peroxide, cooled Fenton’s and a combined alkaline / oxidative treatment using potassium hydroxide and sodium hypochlorite are suitable methods for preparing MP samples for a microspectroscopic analyses. Also acidic sodium polytungstate solution used for MP density separations and a pentane based protocol for lipid removal were found applicable for small sized MP. Certain degradative effects were found when acrylonitrile butadiene styrene is exposed to acidic treatments, as well as for MP from acrylate and epoxy based paint resins in strong oxidative regimes. Several paint resins tested here were spectroscopically not identifiable by polymer attributed bands even before treatment, indicating that these materials might slip through analyses of environmental samples and consequently being underreported. We conclude that evaluating chemical treatment procedures on MP

While it is now appreciated that the millions of tons of plastic pollution travelling through marine systems carry complex communities of microorganisms, it is still unknown to what extent these biofilm communities are specific to the plastic or selected by the surrounding ecosystem. To address this, we characterized and compared the microbial communities of microplastic particles, nonplastic (natural and wax) particles, and the surrounding waters from three marine ecosystems (the Baltic, Sargasso and Mediterranean seas) using high-throughput 16S rRNA gene sequencing. We found that biofilm communities on microplastic and nonplastic particles were highly similar to one another across this broad geographical range. The similar temperature and salinity profiles of the Sargasso and Mediterranean seas, compared to the Baltic Sea, were reflected in the biofilm communities. We identified plastic-specific operational taxonomic units (OTUs) that were not detected on nonplastic particles or in the surrounding waters. Twenty-six of the plastic-specific OTUs were geographically ubiquitous across all sampled locations. These geographically ubiquitous plastic-specific OTUs were mostly low-abundance members of their biofilm communities and often represented uncultured members of marine ecosystems. These results demonstrate the potential for plastics to be a reservoir of rare and understudied microbes, thus warranting further investigations into the dynamics and role of these microbes in marine ecosystems. IMPORTANCE This study represents one of the largest comparisons of biofilms from environmentally sampled plastic and nonplastic particles from aquatic environments. By including particles sampled through three separate campaigns in the Baltic, Sargasso, and Mediterranean seas, we were able to make cross-geographical comparisons and discovered common taxonomical signatures that define the plastic biofilm. For the first time, we identified plastic-specific bacteria that reoccur across marine regions. Our data reveal that plastics have selective properties that repeatedly enrich for similar bacteria regardless of location, potentially shifting aquatic microbial communities in areas with high levels of plastic pollution. Furthermore, we show that bacterial communities on plastic do not appear to be strongly influenced by polymer type, suggesting that other properties, such as the absorption and/or leaching of chemicals from the surface, are likely to be more important in the selection and enrichment of specific microorganisms.

Microplastic (MP) has been detected ubiquitously in freshwater systems. Until now MP sampling, however, is predominantly based on short-term net or pumping and filtration systems which can only provide snapshots of MP abundance; especially in flowing water bodies. To improve representativeness in the determination of MP occurrences in these aquatic compartments, an integrative approach that covers larger water volumes for a longer period of time is required. In this regard, surface water supplied drinking water treatment plants (DWTPs) represent an opportunity. In DWTPs, suspended solids from thousands of cubic metres of raw water are continuously removed over several hours and enriched in coagulation/flocculation and filtration processes. Our hypothesis was that MP is also removed to a full extent, like suspended solids, and that an integrative approach for identification and quantification in raw water can be derived from the analysis of MP in the treatment sludge. To prove this hypothesis, treatment sludge from a riverside DWTP (Warnow river, North-Eastern Germany) was analysed for MP > 50 μm. A sample purification protocol overcoming potential matrix effects caused by coagulants and flocculants was developed and validated. MP was analysed using micro-Raman spectroscopy. MP occurrence determined for the Warnow river was compared with in situ reference sampling using an established pumping and filtration system at relatively stable flow conditions. As result, the number of MP particles derived from treatment sludge was extrapolated to 196 ± 42 m−3 for the Warnow river and is statistically insignificantly different from 233 ± 36 m−3 identified by conventional water sampling. In addition, the polymer distribution and particles shape indicated the validity of the integrative concept. Consequently, the determination of MP abundance for freshwater systems based on DWTP treatment sludge represents an adequate method to estimate MP concentrations in flowing waters in an integrative way.

Proline has been widely used for various cocrystallization applications, including pharmaceutical cocrystals. Combining enantiopure and racemic flurbiprofen and proline, we discovered 18 new crystal structures. Liquid-assisted grinding proved highly efficient to explore all the variety of crystal forms. A unique combination of state-of-the-art characterization techniques, comprising variable temperature in situ X-ray diffraction and in situ ball-milling, along with other physicochemical methods and density functional theory calculations, was indispensable for identifying all the phases. Analyzing the results of in situ ball-milling, we established a stepwise mechanism for the formation of several 1:1 cocrystals via an intermediate 2:1 phase. The nature of the solvent in liquid-assisted grinding was found to significantly affect the reaction rate and, in some cases, the reaction pathway.

The mechanochemical Knoevenagel condensation of malononitrile with p-nitrobenzaldehyde was studied in situ using a tandem approach. X-ray diffraction and Raman spectroscopy were combined to yield time-resolved information on the milling process. Under solvent-free conditions, the reaction leads to a quantitative conversion to p-nitrobenzylidenemalononitrile within 50 minutes. The in situ data indicate that the process is fast and proceeds under a direct conversion. After stopping the milling process, the reaction continues until complete conversion. The continuous and the stopped milling process both result in crystalline products suitable for single crystal X-ray diffraction.

A novel approach for the integration of π-conjugated polymers (CPs) into DNA-based nanostructures is presented. Using the controlled Kumada catalyst-transfer polycondensation, well-defined thiophene-based polymers with controllable molecular weight, specific end groups, and water-soluble oligoethylene glycol-based side chains were synthesized. The end groups were used for the easy but highly efficient click chemistry-based attachment of end-functionalized oligodeoxynucleotides (ODNs) with predesigned sequences. As demonstrated by surface plasmon resonance spectroscopy, the prepared block copolymers (BCPs), P3(EO)3T-b-ODN, comprising different ODN lengths and specific or repetitive sequences, undergo specific hybridization with complementary, thiol-functionalized ODNs immobilized on a gold surface. Furthermore, the site-specific attachment of the BCPs to DNA origami structures is studied. We demonstrate that a nanoscale object, that is, a single BCP with a single ODN handle, can be directed and bound to th...

Mechanochemistry is increasingly used as a ‘green alternative’ for synthesizing various materials including pharmaceutical cocrystals. Herein, we present the mechanochemical synthesis of three new cocrystals containing the API carbamazepine (cocrystals CBZ:Indometacin 1:1, CBZ:Benzamide 1:1, and CBZ:Nifedipine 1:1). The mechanochemical reaction was investigated in situ documenting a fast and complete reaction within one minute. Online NMR spectroscopy proved the direct influence of the dissolution behaviour of the coformers to the dissolution behaviour of the API carbamazepine. The dissolution behaviour of the organic cocrystals is compared to the behaviour of the pure drug indicating a general applicability of this approach for detailed cocrystal dissolution studies.

A newly established in situ technique using Raman spectroscopy was employed for the detailed kinetic investigation of mechanochemical reaction pathways. This approach was applied for the systematic investigation of the direct influence of colliding balls on the reaction rate constants of a mechanochemical cocrystallization reaction. As a model reaction, the mechanochemical cocrystallization of felodipine and the coformer imidazole was investigated. Keeping the total ball mass constant by varying the number of milling balls, our study reveals that the impact of each single collision has a more significant influence on the reaction kinetics than expected.

The effect of the reactant powder mass on reaction times for the mechanochemical formation of a soft matter model system was studied by in situ PXRD. The syntheses were performed at a constant ball mass in a shaker mill with and without glassy SiO2 as an inert additive. Reaction times decreased with the increase of the ball to reactant ratio (BRR). The kinetic influence of the SiO2 powder was excluded. The decrease in the reaction time with decreasing mass of reactants was related to the rise in the stress energy transferred to the powder by a higher ball impact. The BRR had no effect on the induction time. But the product conversion was accelerated by raising the BRR. While a certain temperature is needed for the activation of reactants in the induction phase, the conversion of soft matter reactants is rather controlled by impact than temperature.

DNA origami method aims at the construction of nanometer sized bio-templates from a long single-stranded DNA molecule [1] , [2] . It allows to build a variety of different structures and functionalities arranged with a resolution of about 1 nm for devices like plasmonic antennas or optical waveguides [3] . Our contribution deals with the immobilization of DNA origami templates in well-defined micrometer structures on 6-inch silicon wafers aiming a large-scale fabrication. We present a process of surface structuring of hydrophobic diamond-like carbon and fluorocarbon–polymer layers onto hydrophilic SiO2. Further we introduce a procedure for selective DNA Origamis self-immobilization in these hydrophilic cavities

We present a first direct measurement of the temperature during milling combined with in situ Raman spectroscopy monitoring. The data reveal a low temperature increase due to the mechanical impact and clear temperature increases as a consequence of the reaction heat. Based on the data, temperature rises as postulated in the magma plasma and hot spot theory can be excluded for soft matter milling syntheses.

Microplastics in food is a relatively new research field with only few studies available so far. Scientists have been pointing out that some of these studies apply questionable analytical methods. Nevertheless, media often use such results to gain attention of the readers. It is therefore of particular significance, that only those scientific studies are published, clearly presenting valid data on the content of microplastics in food. Unfortunately, the study by Zuccarello et al. shows very critical aspects regarding analytical methods used and conclusions made. The applied procedure is not described and, therefore, does not allow any assessment by other groups, which is indispensable prerequisite of any scientific publication. Moreover, the analytical method used for the identification and quantification of microplastic particles – SEM-EDX – is not sound and not validated. Therefore, in our opinion the results on the contamination of bottled mineral water with microplastics published by Zuccarello et al. are more than questionable.

Benzamide has been known for its polymorphism for almost 200 years. Three polymorphic forms are described. To date, it was only possible to crystallize a metastable form in a mixture together with the thermodynamically most stable form I. A complete transformation of form I into the metastable form III by mechanochemical treatment has been achieved. Catalytic amounts of nicotinamide seeds were used to activate the conversion by mechanochemical seeding. NMR experiments indicated that the nicotinamide molecules were incorporated statistically in the crystal lattice of benzamide form III during the conversion. The transformation pathway was evaluated using in situ powder X-ray diffraction.

The stability of different theophylline cocrystals under milling conditions was investigated by competitive cocrystal reactions. To determine the most stable cocrystal form under milling conditions, the active pharmaceutical ingredient theophylline was either ground with two similar coformers (benzoic acid, benzamide, or isonicotinamide), or the existing theophylline cocrystals were ground together with a competitive coformer. All competitive reactions were investigated by in situ powder X-ray diffraction disclosing the formation pathway of the milling processes. On the basis of these milling reactions, a stability order (least to most stable) was derived: tp/bs < tp/ba < tp/ina < bs/ina.

Warme, Licht und Elektrizitat sind die typischen Energiequellen chemischer Synthesen. In den letzten Jahren haben sich aber auch mechanische Krafte etabliert: Mechanochemie braucht kein Losungsmittel und funktioniert bei Raumtemperatur. Uber die zugrundeliegenden Prozesse ist bislang wenig bekannt.

The liquid-assisted grinding cocrystallization of theophylline with benzamide leading to polymorphic compounds was investigated. A solvent screening with 17 different solvents was performed. The dipole moment of the solvent used in the synthesis determines the structure of the polymorphic product. A detailed investigation leads to the determination of the kinetically and thermodynamically favored product. In situ observations of the formation pathway during the grinding process of both polymorphs show that the thermodynamically favored cocrystal is formed in a two-step mechanism with the kinetic cocrystal as an intermediate.

The crystalline cadmium phenylphosphonates Cd(O3PPh)·H2O (1), Cd(HO3PPh)2 (2), and Cd(HO3PPh)2(H2O3PPh) (3) can be synthesized via solid state reactions by grinding together cadmium acetate with the respective equivalents of phenylphosphonic acid. Phosphonates (2) and (3) have not been obtained via any other synthesis method so far. The determination of the crystal structure of the new compounds (2) and (3) based on powder X-ray diffraction (PXRD) data is reported. The milling reactions were investigated using in situ synchrotron PXRD. Based on these data, an identification of intermediates and a detailed analysis of the underlying mechanisms were possible.

We present naproxen/proline cocrystals discovered when combining enantiopure and racemic naproxen and proline. Using liquid-assisted grinding as the main method to explore the variety of crystal forms in this system, we found 17 cocrystals, of which the structures of only four of them were previously known. The naproxen/proline system exhibited multiple polymorphs of 1 : 1 stoichiometry as well as more rare cocrystals with 1 : 2 and 2 : 3 stoichiometries, two cocrystal hydrates and one cocrystal solvate. In situ ball-milling, used to monitor liquid-assisted grinding reactions, revealed that the solvent dictates the reaction intermediates even if the final reaction product stays the same. Synchrotron X-ray diffraction data collected in situ upon heating allowed us to monitor directly the phase changes upon heating and gave access to pure diffraction patterns of several cocrystals, thus enabling their structure determination from powder X-ray diffraction data; this method also confirmed the formation of a conglomerate in the RS-naproxen/dl-proline system. Proline in cocrystals kept its ability to form charge-assisted head-to-tail N-H...O hydrogen bonds, typical of pure crystalline amino acids, thus increasing the percentage of strong charge-assisted interactions in the structure and consequently providing some of the cocrystals with higher melting points as compared to pure naproxen. The majority of drugs are chiral, and hence, these data are of importance to the pharmaceutical industry as they provide insight into the challenges of chiral cocrystallization.

Mechanochemical reactions often result in 100% yields of single products, making purifying procedures obsolete. Mechanochemistry is also a sustainable and eco-friendly method. The ever increasing interest in this method is contrasted by a lack in mechanistic understanding of the mechanochemical reactivity and selectivity. Recent in situ investigations provided direct insight into formation pathways. However, the currently available theories do not predict temperature T as an influential factor. Here, we report the first determination of an apparent activation energy for a mechanochemical reaction. In a temperature-dependent in situ study the cocrystallisation of ibuprofen and nicotinamide was investigated as a model system. These experiments provide a pivotal step towards a comprehensive understanding of milling reaction mechanisms.

Theophylline has been used as an active pharmaceutical ingredient (API) in the treatment of pulmonary diseases, but due to its low water solubility reveals very poor bioavailability. Based on its different hydrogen-bond donor and acceptor groups, theophylline is an ideal candidate for the formation of cocrystals. The crystal structure of the 1:1 benzamide cocrystal of theophylline, C7H8N4O2·C7H7NO, was determined from synchrotron X-ray powder diffraction data. The compound crystallizes in the tetragonal space groupP41with four independent molecules in the asymmetric unit. The molecules form a hunter's fence packing. The crystal structure was confirmed by dispersion-corrected DFT calculations. The possibility of salt formation was excluded by the results of Raman and1H solid-state NMR spectroscopic analyses.