Search

Most commercial swimming pools use pressurised filters, typically containing sand media, to remove suspended solids as part of the water treatment process designed to keep water attractive, clean and safe. The accidental release of faecal material by bathers presents a poorly quantified risk to the safety of swimmers using the pool. The water treatment process usually includes a combination of maintaining a residual concentration of an appropriate biocide in the pool together with filtration to physically remove particles, including microbial pathogens, from the water. However, there is uncertainty about the effectiveness of treatment processes in removing all pathogens, and there has been growing concern about the number of reported outbreaks of the gastrointestinal disease cryptosporidiosis, caused by the chlorine-resistant protozoan parasite Cryptosporidium. A number of interacting issues influence the effectiveness of filtration for the removal of Cryptosporidium oocysts from swimming pools. This review explains the mechanisms by which filters remove particles of different sizes (including oocyst-sized particles, typically 4–6 μm), factors that affect the efficiency of particle removal (such as filtration velocity), current recommended management practices, and identifies further work to support the development of a risk-based management approach for the management of waterborne disease outbreaks from swimming pools. This article has been made Open Access thanks to the generous support of a global network of libraries as part of the Knowledge Unlatched Select initiative.

Water contamination with dyes is harmful to humans and the environment. This study investigated the photocatalytic activity of natural clay (GOL) mixed with carbon nanotubes (CNT) for removal of brilliant black (BB) in wastewater. The materials were characterized with FESEM-EDS, XRD, XRF, FTIR and UV-vis DRS. The natural clay contains 2.34 % TiO2 which is 75% more than most natural clays. SEM showed that CNT were well dispersed and mixed with clay. DRS spectra showed two absorption bands above 380 nm. CNT in GOL has decreased significantly the energy band gaps from 2.75 and 3.25 eV to 1.53 and 2.90 eV for GOL and 10% CNT–GOL, respectively. Photocatalytic activity was enhanced with degradation of BB increased from 66 to 95% with GOL and 10% CNT–GOL respectively after 45 min of visible light irradiation. The improvement can be attributed to the synergy of the interface heterojunction of clay and CNT. The presence of CNT reduces the e− and h+ (e− / h+) pairs recombination and facilitates the production of reactive oxygen species responsible for the decay of dye. The addition of H2O2 to the experiment (2 mmoL) confirmed the role of holes and hydroxyl radicals. Eighty-five percent of BB carbon content was removed with 10% CNT–GOL suggesting that mineralization occurred. After 45 min of visible light irradiation, the degradation kinetic studies followed a second-order reaction with a R2 = 0.997. Therefore, natural clay–CNT nanocomposites can be applied to treat dyes containing wastewaters.

The presence of SARS-CoV-2 RNA in wastewater was first reported in March 2020. Over the subsequent months, the potential for wastewater surveillance to contribute to COVID-19 mitigation programmes has been the focus of intense national and international research activities, gaining the attention of policy makers and the public. As a new application of an established methodology, focused collaboration between public health practitioners and wastewater researchers is essential to developing a common understanding on how, when and where the outputs of this non-invasive community-level approach can deliver actionable outcomes for public health authorities. Within this context, the NORMAN SCORE “SARS-CoV-2 in sewage” database provides a platform for rapid, open access data sharing, validated by the uploading of 276 data sets from nine countries to-date. Through offering direct access to underpinning meta-data sets (and describing its use in data interpretation), the NORMAN SCORE database is a resource for the development of recommendations on minimum data requirements for wastewater pathogen surveillance. It is also a tool to engage public health practitioners in discussions on use of the approach, providing an opportunity to build mutual understanding of the demand and supply for data and facilitate the translation of this promising research application into public health practice. Validerad;2021;Nivå 2;2021-05-21 (alebob);Finansiär: För finansiärsinformation se Acknowledgements https://www.sciencedirect.com/science/article/pii/S0043135421003651?via%3Dihub#ack0001 DRIZZLE

The efficacy of chlorine disinfection was assessed for the first time over a range of disinfection conditions using flow cytometry (FCM) to provide new insights into disinfection processes. Inactivation was assessed for pure culture bacteria (Escherichia coli) and micro-organisms in real treated water from operational water treatment works (WTWs). A dose dependent increase in inactivation rate (k) was observed for both test matrices, with values of 0.03 to 0.26 and 0.32 to 3.14 L/mg min for the WTW bacteria and E. coli, respectively. After 2 min, E. coli was reduced by 2 log for all chlorine doses (0.12 to 1.00 mg/L). In the case of the WTW filtrate bacteria, after 2 min log reductions were between 0.54 and 1.14 with increasing chlorine concentration, reaching between 1.32 and 2.33 after 30 min. A decrease in disinfection efficacy was observed as temperature decreased from 19 to 5 °C for both microbial populations. With respect to chlorination at different pH (pH 6, 7, 8), membrane damage was more pronounced at higher pH. This was not consistent with the higher disinfection efficacy seen at lower pH. when culture based methods are used to assess bacterial reductions. This provides evidence that more understanding into the fundamental mechanisms of chlorine disinfection are required and that methodological alterations may be required (e.g. pH standardisation) to fully utilise FCM over the entire range of chlorination conditions observed in operational environments.

Turbidity in water can be caused by a range of different turbidity causing materials (TCM). Here the characteristics and attachment of bacteria to TCMs was assessed and the resultant impact on UV disinfection determined. TCMs represent potential vehicles for bacterial penetration of water treatment barriers, contamination of potable supplies and impact on subsequent human health. The TCMs under investigation were representative of those that may be present in surface and ground waters, both from the source and formed in the treatment process. The TCMs were chalk, Fe (III) hydroxide precipitate, kaolin clay, manganese dioxide and humic acids, at different turbidity levels representative of source waters (0, 0.1, 0.2, 0.4, 1, 2, and 5 NTU). Escherichia coli and Enterococcus faecalis attachment followed the order of Fe(III) > chalk, with little to no attachment seen for MnO2, humic acids and clay. The attachment was postulated to be due to chalk and Fe(III) particles having a more neutral surface charge resulting in elevated aggregation with bacteria compared to other TCMs. The humic acids and Fe(III) were the TCMs which influenced inactivation of E. coli and E. faecalis due to decreasing UV transmittance (UVT) with increasing TCM concentration. The presence of the Fe(III) TCM at 0.2 NTU resulted in the poorest E. coli inactivation, with 2.5 log10 reduction at UV dose of 10 mJ cm− 2 (kd of − 0.23 cm2 mJ− 1) compared to a 3.9 log10 reduction in the absence of TCMs. E. faecalis had a greater resistance to UV irradiation than E. coli for all TCMs. Effective disinfection of drinking water is a priority for ensuring high public health standards. Uniform regulations for turbidity levels for waters pre-disinfection by UV light set by regulators may not always be appropriate and efficacy is dependent on the type, as well as the amount, of turbidity present in the water.

Ultraviolet light-emitting diodes (UV-LEDs) have recently emerged as a viable technology for water disinfection. However, the performance of the technology in full-scale drinking-water treatment systems remains poorly characterised. Furthermore, current UV disinfection standards and protocols have been developed specifically for conventional mercury UV systems and so do not necessarily provide an accurate indication of UV-LED disinfection performance. Hence, this study aimed to test the hypothesis that a full-scale UV-LED reactor can match the Cryptosporidium inactivation efficiency of conventional mercury UV reactors. Male-specific bacteriophage (MS2) was used as the Cryptosporidium spp. surrogate microorganism. The time-based inactivation efficiency of the full-scale reactor was firstly compared to that of a bench-scale (batch-type) UV-LED reactor. This was then related to mercury UV reactors by comparing the fluence-based efficiency of the bench-scale reactor to the USEPA 90% prediction interval range of expected MS2 inactivation using mercury UV lamps. The results showed that the full-scale UV-LED reactor was at least as effective as conventional mercury UV reactors at the water-quality and drive-current conditions considered. Nevertheless, comparisons between the bench- and full-scale UV-LED reactors indicated that improvements in the hydraulic flow profile and power output of the full-scale reactor could help to further improve the efficiency of UV-LED reactors for municipal drinking water disinfection. This represents the world&rsquo, s first full-scale UV-LED reactor that can be applied at municipal water treatment works for disinfection of pathogenic microorganisms from drinking water.

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link. Polar, low molecular weight pesticides such as metaldehyde are challenging and costly to remove from drinking water using conventional treatment methods. Although biological treatments can be effective at treating micropollutants, through biodegradation and sorption processes, only some operational biofilters have shown the ability to remove metaldehyde. As sorption plays a minor role for such polar organic micropollutants, biodegradation is therefore likely to be the main removal pathway. Here, the biodegradation of metaldehyde was monitored, and assessed, in an operational slow sand filter. Long-term data showed that metaldehyde degradation improved when inlet concentrations increased. A comparison of inactive and active sand batch reactors showed that metaldehyde removal happened mainly through biodegradation and that the removal rates were greater after the biofilm was acclimated through exposure to high metaldehyde concentrations. This suggested that metaldehyde removal was reliant on enrichment and that the process could be engineered to decrease treatment times (from days to hours). Through-flow experiments using fluidised bed reactors, showed the same behaviour following metaldehyde acclimation. A 40% increase in metaldehyde removal was observed in acclimated compared with non-acclimated columns. This increase was sustained for more than 40 days, achieving an average of 80% removal and compliance (< 0.1 µ L-1) for more than 20 days. An initial microbial analysis of the acclimated and non-acclimated biofilm from the same filter materials, showed that the microbial community in acclimated sand was significantly different. This work presents a novel conceptual template for a faster, chemical free, low cost, biological treatment of metaldehyde and other polar pollutants in drinking water. In addition, this is the first study to report kinetics of metaldehyde degradation in an active microbial biofilm at a WTW.

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link. Metaldehyde removal was delivered to below the 0.1 µg L-1 regulatory concentration in a laboratory scale continuous upflow fluidised sand bioreactor that had undergone acclimation through selective enrichment for metaldehyde degradation. This is the first reported case of successful continuous flow biological treatment of metaldehyde from real drinking water sources treating environmentally realistic metaldehyde concentrations. The impact of the acclimation process was impermanent, with the duration of effective treatment directly related to the elevated concentration of metaldehyde used during the enrichment process. The efficacy of the approach was demonstrated in continuous flow columns at both laboratory and pilot scale enabling degradation rates of between 0.1 and 0.2 mg L-1 h-1. Future work needs to focus on optimisation of the sand bioreactor and the acclimation process to ensure viability and feasibility of the approach at full scale.

The naphthoic acids are challenging and costly to remove from water and soil. 1-Hydroxy-2-Naphthoic acid (HNA) is a phenanthrene decomposition product from petroleum-contaminated environments during the aerobic decomposition of polyaromatic hydrocarbons. The hydrogeological mobility of hydrocarbon breakdown products represent a pollution risk (e.g. for drinking water sources). Adsorption to biochar produced from agricultural by-products is a useful strategy to remediate contaminated wastewaters. Here, we examine the controls on the HNA adsorption to the adsorbents magnetite, clay minerals, biochar and magnetite enriched companion materials, namely the influence of contact time, contaminant concentration and ionization effects at different pH. The adsorption of HNA was investigated using low-cost and readily available adsorbents: (i) wheat straw biochar, (ii) rice husk biochar, (iii) sugarcane biochar, (iv) zeolite, (v) montmorillonite, (vi) magnetite and their enriched magnetic companions. Magnetite enriched biochar exhibited greater adsorption rates compared with their nonmagnetic analogs for HNA. The maximum adsorption capacity of the magnetite enriched compounds (initial water concentration of 0.32 mmol HNA.L − 1 ) was 0.45 mmol.HNA.g − 1 of enriched zeolite. The magnetite enriched biochar and conventional biochar showed similar adsorption kinetics although magnetite enrichment improved the efficacy of adsorption. The adsorption fitted the pseudo-second order model in all cases, suggesting the dominant mechanism of adsorption was chemisorption. The magnetite enrichment reduced intra-particle diffusion, possibly due to fouling or blocking of pores within the particles, as evidenced by the decrease in diffusion rate constants. Overall, HNA adsorption improved after magnetic enrichment due to magnetite competing with inhibition sites on the biochar carriers. These findings translate into equivalence between magnetite and magnetic biochars, suggesting cheaper alternative materials could be synthesized in situ with the biochar acting as both an adsorbent and carrier, increasing the prospect of designer biochars for targeted pollutant removal. This approach has the potential to be used for wastewater treatment or for application as a soil additive for remediation of runoff from contaminated soils.

Biological processes for wastewater treatment is limited by extracellular enzyme activity (EEA) of the biofilm on polymeric substrates. The efficiency of biodegradation / biosorption mechanisms causing EEA and organic load removal in biofilms remains unknown. Our hypothesis was that the limiting step of biological process can be overcome by biostimulation and/or bioaugmentation of the return sludge in hybrid biofilm reactors, which leads to competition between suspended and attached bacteria and lower effective substrate to microrganism ratio. Therefore, we considered more active biosolids to perform best at enhancing reactor removal rate. To test this, the efficacy of recycling distinct bio-solids types considered to have different bacterial activity such as final effluent (FE), humus solids (HS) and recycle activated sludge (RAS) on performance improvements of rotating biofilm reactors (RBRs). These bio-solids were investigated under high organic loading rates (OLR) and solids loading rates (SLR) using pilot scale reactors receiving real municipal wastewaters. Controlled overloading of RBRs revealed that EEA improved with increasing OLR/SLR. High SLR (>3.3 kg Total Suspended Solids m−2 d−1) delayed and decreased the reduction of organic and inorganic removal rates in the biological processes which commonly occurs under high OLRs. This effect was more pronounced in the highest activity solids (RAS > HS > FE) suggesting the activity and function of bio-solids was critical to improve performance of RBRs. High OLR and SLR induced efficient denitrification and organics removal within the biofilm reactor at residence times of

Ammonia oxidising microorganisms (AOM) play an important role in ammonia removal in wastewater treatment works (WWTW) including rotating biological contactors (RBCs). Environmental factors within RBCs are known to impact the performance of key AOM, such that only some operational RBCs have shown ability for elevated ammonia removal. In this work, long-term treatment performance of seven full-scale RBC systems along with the structure and abundance of the ammonia oxidising bacteria (AOB) and archaea (AOA) communities within microbial biofilms were examined. Long term data showed the dominance of AOB in most RBCs, although two RBCs had demonstrable shift toward an AOA dominated AOM community. Next Generation Sequencing of the 16S rRNA gene revealed diverse evolutionary ancestry of AOB from RBC biofilms while nitrite-oxidising bacteria (NOBs) were similar to reference databases. AOA were more abundant in the biofilms subject to lower organic loading and higher oxygen concentration found at the distal end of RBC systems. Modelling revealed a distinct nitrogen cycling community present within high performing RBCs, linked to efficient control of RBC process variables (retention time, organic loading and oxygen concentration). We present a novel template for enhancing the resilience of RBC systems through microbial community analysis which can guide future strategies for more effective ammonia removal. To best of the author’s knowledge, this is the first comparative study reporting the use of next generation sequencing data on microbial biofilms from RBCs to inform effluent quality of small WWTW. Keywords: Biofilm, Rotating biological contactor, Nitrification, Wastewater treatment, Ammonia oxidising bacteria, Ammonia oxidising archaea

To assess fecal pollution in coastal waters, current monitoring is reliant on culture-based enumeration of bacterial indicators, which does not account for the presence of viable but non-culturable or sediment-associated micro-organisms, preventing effective quantitative microbial risk assessment (QMRA). Seasonal variability in viable but non-culturable or sediment-associated bacteria challenge the use of fecal indicator organisms (FIOs) for water monitoring. We evaluated seasonal changes in FIOs and human enteric pathogen abundance in water and sediments from the Ribble and Conwy estuaries in the UK. Sediments possessed greater bacterial abundance than the overlying water column, however, key pathogenic species (Shigella spp., Campylobacter jejuni, Salmonella spp., hepatitis A virus, hepatitis E virus and norovirus GI and GII) were not detected in sediments. Salmonella was detected in low levels in the Conwy water in spring/summer and norovirus GII was detected in the Ribble water in winter. The abundance of E. coli and Enterococcus spp. quantified by culture-based methods, rarely matched the abundance of these species when measured by qPCR. The discrepancy between these methods was greatest in winter at both estuaries, due to low CFU's, coupled with higher gene copies (GC). Temperature accounted for 60% the variability in bacterial abundance in water in autumn, whilst in winter salinity explained 15% of the variance. Relationships between bacterial indicators/pathogens and physicochemical variables were inconsistent in sediments, no single indicator adequately described occurrence of all bacterial indicators/pathogens. However, important variables included grain size, porosity, clay content and concentrations of Zn, K, and Al. Sediments with greater organic matter content and lower porosity harbored a greater proportion of non-culturable bacteria (including dead cells and extracellular DNA) in winter. Here, we show the link between physicochemical variables and season which govern culturability of human enteric pathogens and FIOs. Therefore, knowledge of these factors is critical for accurate microbial risk assessment. Future water quality management strategies could be improved through monitoring sediment-associated bacteria and non-culturable bacteria. This could facilitate source apportionment of human enteric pathogens and FIOs and direct remedial action to improve water quality.