Search

Rationally tuning the local structures of single-atomic active sites for the electrocatalytic N2 reduction reaction (NRR) remains an urgent but worthwhile research topic. Herein, we accomplish the ...

We used a combination of ultra-high vacuum surface science techniques, X-ray spectroscopy, electrochemistry, and density functional theory (DFT) to characterize the influence of catalyst morphology...

The reaction of CO and O2 with submonolayer and multilayer CoOx films on Pt(111), to produce CO2, was investigated at room temperature in the mTorr pressure regime. Using operando ambient pressure X-ray photoelectron spectroscopy and high pressure scanning tunneling microscopy, as well as density functional theory calculations, we found that the presence of oxygen vacancies in partially oxidized CoOx films significantly enhances the CO oxidation activity to form CO2 upon exposure to mTorr pressures of CO at room temperature. In contrast, CoO films without O-vacancies are much less active for CO2 formation at RT, and CO only adsorbed in the form of carbonate species that are stable up to 260 °C. On submonolayer CoOx islands, the carbonates form preferentially at island edges, deactivating the edge sites for CO2 formation, even while the reaction proceeds inside the islands. These results provide a detailed understanding of CO oxidation pathways on systems where noble metals such as Pt interact with reducible oxides.

The reducibility of metal oxides, when they serve as the catalyst support or are the active sites themselves, plays an important role in heterogeneous catalytic reactions. Here we present an integr...

Unlike the wide-ranging dynamic control of electrical conductivity, there does not exist an analogous ability to tune thermal conductivity by means of electric potential. The traditional picture assumes that atoms inserted into a material’s lattice act purely as a source of scattering for thermal carriers, which can only reduce thermal conductivity. In contrast, here we show that the electrochemical control of oxygen and proton concentration in an oxide provides a new ability to bi-directionally control thermal conductivity. On electrochemically oxygenating the brownmillerite SrCoO2.5 to the perovskite SrCoO3–δ, the thermal conductivity increases by a factor of 2.5, whereas protonating it to form hydrogenated SrCoO2.5 effectively reduces the thermal conductivity by a factor of four. This bi-directional tuning of thermal conductivity across a nearly 10 ± 4-fold range at room temperature is achieved by using ionic liquid gating to trigger the ‘tri-state’ phase transitions in a single device. We elucidated the effects of these anionic and cationic species, and the resultant changes in lattice constants and lattice symmetry on thermal conductivity by combining chemical and structural information from X-ray absorption spectroscopy with thermoreflectance thermal conductivity measurements and ab initio calculations. This ability to control multiple ion types, multiple phase transitions and electronic conductivity that spans metallic through to insulating behaviour in oxides by electrical means provides a new framework for tuning thermal transport over a wide range. Unlike dynamic control of electrical conductivity, tuning thermal conductivity by means of electric potential is challenging. Electrochemically induced phase transition control of oxygen and proton concentration in a SrCoOx oxide provides a way to tune bi-directionally thermal conductivity.

The deposition of cesium (Cs) onto the metallic and oxidized surfaces of Cu(111) was investigated using scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and density func...

The cycling stability of LiCoO2 under high voltages (>4.5 V) was plagued by hybrid anion- and cation-redox (HACR) induced oxygen escape and uncontrolled phase collapse. With DEMS and in situ XANES mapping at the NSLS-II, we demonstrate that oxygen escape triggers irreversible transformations into “bad” surface phases that rapidly propagate inward. Enabling HACR but stopping global oxygen migration is key to a stable high-energy cathode. Therefore, we developed ∼10 μm single crystals with LiCoO2 in the bulk smoothly transitioning to Co-free LiMn0.75Ni0.25O2 at the surface. By means of initial electrochemical formation, a semi-coherent LiMn1.5Ni0.5O4 spinel-like shell was established in operando with little oxygen loss to integrally wrap the LiCoO2 bulk. Then we obtained gradient-morph LiCoO2 single crystals to prevent the percolating migration of oxygen out of the particle and achieved enhanced HACR reversibility at high voltages. The gradient-morph HACR cathode undergoes substantially stabilized cycling when charged to above 4.6 V, and hence a stable cyclic volumetric energy density of >3400 W h L−1 has been achieved in a pouch full-cell coupled with a commercial graphite anode and lean electrolyte (2 g A h−1), exhibiting up to 2906 W h L−1 even after 300 cycles.

Lithium-rich transition metal oxide (Li1+XM1−XO2) cathodes have high energy density above 900 Wh kg−1 due to hybrid anion- and cation-redox (HACR) contributions, but critical issues such as oxygen release and voltage decay during cycling have prevented their application for years. Here we show that a molten molybdate-assisted LiO extraction at 700 °C creates lattice-coherent but depth (r)-dependent Li1+X(r)M1−X(r)O2 particles with a Li-rich (X ≈ 0.2) interior, a Li-poor (X ≈ −0.05) surface and a continuous gradient in between. The gradient Li-rich single crystals eliminate the oxygen release to the electrolyte and, importantly, still allow stable oxygen redox contributions within. Both the metal valence states and the crystal structure are well maintained during cycling. The gradient HACR cathode displays a specific density of 843 Wh kg−1 after 200 cycles at 0.2C and 808 Wh kg−1 after 100 cycles at 1C, with very little oxygen release and consumption of electrolyte. This high-temperature immunization treatment can be generalized to leach other elements to avoid unexpected surface reactions in batteries. Critical issues such as oxygen release during battery cycling plague the development of high-energy Li-rich oxide cathodes. Here the authors report a Li-gradient structure of the oxides, obtained by a selective LiO leaching process via a molten salt treatment, displaying virtually zero oxygen loss.

Despite mounting evidence that materials imperfections are a major obstacle to practical applications of superconducting qubits, connections between microscopic material properties and qubit coherence are poorly understood. Here, we combine measurements of transmon qubit relaxation times (T1) with spectroscopy and microscopy of the polycrystalline niobium films used in qubit fabrication. By comparing films deposited using three different techniques, we reveal correlations between T1 and intrinsic film properties such as grain size, enhanced oxygen diffusion along grain boundaries, and the concentration of suboxides near the surface. Qubit and resonator measurements show signatures of two-level system defects, which we propose to be hosted in the grain boundaries and surface oxides. We also show that the residual resistance ratio of the polycrystalline niobium films can be used as a figure of merit for qubit lifetime. This comprehensive approach to understanding qubit decoherence charts a pathway for materials-driven improvements of superconducting qubit performance. Understanding the connection between qubit coherence and microscopic materials properties is vital for improving device performance. Here, the relaxation times of superconducting transmon qubits are found to be directly correlated with Nb film properties such as grain size and surface oxide composition.

The present study examines the synthesis of unique Cu nanostructured model catalysts and their catalytic activity toward CO2 hydrogenation under moderate temperature and pressure reaction condition...

LiNi0.8Co0.15Al0.05O2 (NCA) has been proven to be a good cathode material for lithium-ion batteries (LIBs), especially in electric vehicle applications. However, further elevating energy density of...

Transition metal oxides have gained attention as promising oxygen evolution reaction (OER) electrocatalysts in alkaline electrolytes, but heterogeneities in typical catalyst samples often obscure k...

Pt-Cu single-atom alloys (SAA) have been identified as promising hydrogenation catalysts with an ability to activate H2 better than the individual metals alone. We studied the interaction between H2 and Pt/Cu(111) SAA model surface using ambient pressure X-ray photoelectron spectroscopy (AP-XPS). A binding energy shift in the Pt 4f spectrum indicates the presence of adsorbed H at 350 K, occurring because of H H bond activation. No evidence was found of either surface segregation, subsurface diffusion of Pt atoms, or any effects on the thermal stability of the surface, likely due to the subtle interaction between Pt and H. This shift is reversible upon evacuation of H2, which is a sign of a weak interaction. In addition, we studied the effect of H2 and CO co-adsorption and found that while the surface is unaffected by poisoning by a small amount of CO at 350 K, CO can displace adsorbed H on almost half of the surface Pt sites at 300 K. The susceptibility to CO poisoning increases after the surface was heated to 450 K due to changes in the structure of the subsurface layer that enhance the binding of CO to the surface Pt sites.

The catalytic oxidation of CO on transition metals, such as Pt, is commonly viewed as a sharp transition from the CO-inhibited surface to the active metal, covered with O. However, we find that minor amounts of O are present in the CO-poisoned layer that explain why, surprisingly, CO desorbs at stepped and flat Pt crystal planes at once, regardless of the reaction conditions. Using near-ambient pressure X-ray photoemission and a curved Pt(111) crystal we probe the chemical composition at surfaces with variable step density during the CO oxidation reaction. Analysis of C and O core levels across the curved crystal reveals that, right before light-off, subsurface O builds up within (111) terraces. This is key to trigger the simultaneous ignition of the catalytic reaction at different Pt surfaces: a CO-Pt-O complex is formed that equals the CO chemisorption energy at terraces and steps, leading to the abrupt desorption of poisoning CO from all crystal facets at the same temperature., We acknowledge financial support from the Spanish Ministry of Science and Innovation (Grants MAT-2017-88374-P, PID2019-107338RB-C63, PID2019-107338RB-C66), the Basque Government (Grants IT-1255-19, IT-1246-19), the Knut and Alice Wallenberg foundation (DNR KAW 2015.0058 „Atomistic Design of new Catalysts“) and the Swedish Research Council (DNR 349-2011-6491 „Catalysis on the atomic scale“).

Interfacially confined microenvironments have recently gained attention in catalysis, as they can be used to modulate reaction chemistry. The emergence of a 2D nanospace at the interface between a 2D material and its support can promote varying kinetic and energetic schemes based on molecular level confinement effects imposed in this reduced volume. We report on the use of a 2D oxide cover, bilayer silica, on catalytically active Pd(111) undergoing the CO oxidation reaction. We "uncover" mechanistic insights about the structure-activity relationship with and without a 2D silica overlayer using in situ IR and X-ray spectroscopy and mass spectrometry methods. We find that the CO oxidation reaction on Pd(111) benefits from confinement effects imposed on surface adsorbates under 2D silica. This interaction results in a lower and more dispersed coverage of CO adsorbates with restricted CO adsorption geometries, which promote oxygen adsorption and lay the foundation for the formation of a reactive surface oxide that produces higher CO2 formation rates than Pd alone.

Physical neural networks made of analog resistive switching processors are promising platforms for analog computing. State-of-the-art resistive switches rely on either conductive filament formation or phase change. These processes suffer from poor reproducibility or high energy consumption, respectively. Herein, we demonstrate the behavior of an alternative synapse design that relies on a deterministic charge-controlled mechanism, modulated electrochemically in solid-state. The device operates by shuffling the smallest cation, the proton, in a three-terminal configuration. It has a channel of active material, WO3. A solid proton reservoir layer, PdHx, also serves as the gate terminal. A proton conducting solid electrolyte separates the channel and the reservoir. By protonation/deprotonation, we modulate the electronic conductivity of the channel over seven orders of magnitude, obtaining a continuum of resistance states. Proton intercalation increases the electronic conductivity of WO3 by increasing both the carrier density and mobility. This switching mechanism offers low energy dissipation, good reversibility, and high symmetry in programming., Designing energy efficient neural networks based on synaptic memristor devices remains a challenge. Here, the authors propose the development of a 3-terminal WO3 synaptic device based on proton intercalation in inorganic materials by leveraging a solid proton reservoir layer PdHx as the gate terminal.

Solid-state ion shuttles are of broad interest in electrochemical devices, nonvolatile memory, neuromorphic computing, and biomimicry utilizing synthetic membranes. Traditional design approaches are primarily based on substitutional doping of dissimilar valent cations in a solid lattice, which has inherent limits on dopant concentration and thereby ionic conductivity. Here, we demonstrate perovskite nickelates as Li-ion shuttles with simultaneous suppression of electronic transport via Mott transition. Electrochemically lithiated SmNiO 3 (Li-SNO) contains a large amount of mobile Li + located in interstitial sites of the perovskite approaching one dopant ion per unit cell. A significant lattice expansion associated with interstitial doping allows for fast Li + conduction with reduced activation energy. We further present a generalization of this approach with results on other rare-earth perovskite nickelates as well as dopants such as Na + . The results highlight the potential of quantum materials and emergent physics in design of ion conductors.

All-solid-state batteries promise significant safety and energy density advantages over liquid-electrolyte batteries. The interface between the cathode and the solid electrolyte is an important contributor to charge transfer resistance. Strong bonding of solid oxide electrolytes and cathodes requires sintering at elevated temperatures. Knowledge of the temperature dependence of the composition and charge transfer properties of this interface is important for determining the ideal sintering conditions. To understand the interfacial decomposition processes and their onset temperatures, model systems of LiCoO2 (LCO) thin films deposited on cubic Al-doped Li7La3Zr2O12 (LLZO) pellets were studied as a function of temperature using interface-sensitive techniques. X-ray photoelectron spectroscopy (XPS), secondary ion mass spectroscopy (SIMS), and energy-dispersive X-ray spectroscopy (EDS) data indicated significant cation interdiffusion and structural changes starting at temperatures as low as 300°C. La2Zr2O7 and Li2CO3 were identified as decomposition products after annealing at 500°C by synchrotron X-ray diffraction (XRD). X-ray absorption spectroscopy (XAS) results indicate the presence of also LaCoO3, in addition to La2Zr2O7 and Li2CO3. Based on electrochemical impedance spectroscopy, and depth profiling of the Li distribution upon potentiostatic hold experiments on symmetric LCO|LLZO|LCO cells, the interfaces exhibited significantly increased impedance, up to 8 times that of the as-deposited samples after annealing at 500°C. Our results indicate that lower-temperature processing conditions, shorter annealing time scales, and CO2-free environments are desirable for obtaining ceramic cathode-electrolyte interfaces that enable fast Li transfer and high capacity.

The interaction between a catalyst and reactants often induces changes in the surface structure and composition of the catalyst, which, in turn, affect its reactivity. Therefore, it is important to study such changes using in situ techniques under well-controlled conditions. We have used ambient pressure X-ray photoelectron spectroscopy to study the surface stability of a Pt/Cu(111) single-atom alloy in an ambient pressure of CO. By directly probing the Pt atoms, we found that CO causes a slight surface segregation of Pt atoms at room temperature. In addition, while the Pt/Cu(111) surface demonstrates poor thermal stability in ultrahigh vacuum conditions, where surface Pt starts to diffuse to the subsurface layer above 400 K, the presence of adsorbed CO enhances the thermal stability of surface Pt atoms. However, we also found that temperatures above 450 K cause restructuring of the subsurface layer, which consequently strengthens the CO binding to the surface Pt sites, likely because of the presence of n...

The results of kinetic tests and ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) show the important role played by a ZnO-copper interface in the generation of CO and the synthesis of methanol from CO2 hydrogenation. The deposition of nanoparticles of ZnO on Cu(100) and Cu(111), θoxi < 0.3 monolayer, produces highly active catalysts. The catalytic activity of these systems increases in the sequence: Cu(111) < Cu(100) < ZnO/Cu(111) < ZnO/Cu(100). The structure of the copper substrate influences the catalytic performance of a ZnO-copper interface. Furthermore, size and metal-oxide interactions affect the chemical and catalytic properties of the oxide making the supported nanoparticles different from bulk ZnO. The formation of a ZnO-copper interface favors the binding and conversion of CO2 into a formate intermediate that is stable on the catalyst surface up to temperatures above 500 K. Alloys of Zn with Cu(111) and Cu(100) were not stable at the elevated temperatures (500-600 K) used for the CO2 hydrogenation reaction. Reaction with CO2 oxidized the zinc, enhancing its stability over the copper substrates.

In order to further enhance the performance of photocatalysts, cocatalysts are used to accelerate the photocatalytic reactions. Herein, ultrafine cobalt oxide (CoO) nanoparticles are synthesized through a novel bottom-up strategy and explored as an efficient non-noble cocatalyst to dramatically promote the photocatalytic hydrogen evolution rate of CdS nanorods. CdS/CoO heterostructures, consisting of highly dispersed 3–5 nm CoO nanoparticles anchored on the CdS nanorods, can provide a high photocatalytic hydrogen evolution rate of 6.45 mmol g−1 h−1 (∼36 times higher than that of bare CdS nanorods) in the visible-light region (>420 nm). Combined X-ray photoelectron spectroscopy and X-ray absorption near edge spectroscopy analyses suggest Co–S bond formation between CoO and CdS, which guarantees efficient migration and separation of photogenerated charge carriers. This work provides a new avenue for adopting CoO as an effective cocatalyst for enhanced photocatalytic hydrogen production in the visible-light region.

Magneto-ionic control of magnetism has garnered great interest in recent years due to the large magnetic changes that can be induced using a relatively small voltage. One model structure for this is $\mathrm{Pt}/\mathrm{Co}/\mathrm{Gd}{\mathrm{O}}_{x}/\mathrm{Au}$, where Co is the magnetic layer and $\mathrm{Gd}{\mathrm{O}}_{x}$ is the ionic conductor, with the magnetic properties dependent on the oxidation state of Co. While this structure is commonly used, there is limited understanding of the effect of $\mathrm{Gd}{\mathrm{O}}_{x}$ properties on voltage-induced magnetic changes. In this work, we show that hydration of $\mathrm{G}{\mathrm{d}}_{2}{\mathrm{O}}_{3}$ to form $\mathrm{Gd}{(\mathrm{OH})}_{3}$ is crucial for voltage-induced Co oxidation in a $\mathrm{Pt}/\mathrm{Co}/\mathrm{Gd}{\mathrm{O}}_{x}/\mathrm{Au}$ device. By examining the rate of Co oxidation in nonhydrated and hydrated devices, we conclude that ${\mathrm{H}}_{2}\mathrm{O}$ in the $\mathrm{Gd}{\mathrm{O}}_{x}$ layer acts as an oxidant during the voltage-induced Co oxidation process. Co oxidation through this interfacial reaction process is confirmed by in situ x-ray absorption spectroscopy.

The dry reforming of methane (DRM) is a promising process for generating syngas (CO + H2) while consuming CO2, but industrial applications have been limited due to the high temperatures required to prevent coke formation. Microwave-assisted DRM (MW-DRM) is a promising approach to enable high temperature reactions because it can utilize excess renewable electrons to rapidly and selectively heat the catalyst bed without wasting time and energy heating the entire reactor. Here we demonstrate the MW-DRM reaction by modifying lanthanum strontium cobaltite (LSC) to serve as both microwave absorber and catalyst. Catalyst doping studies revealed the addition of oxophilic transition metals prevented over-reduction and stabilized the perovskitic phases under reaction conditions. In situ, synchrotron-based x-ray diffraction revealed the catalyst becomes active once metallic cobalt forms on a retained perovskitic support. The best performing Mn doped LSC catalyst showed 80–90 % single-pass conversions, stable operation for over 10 h, and easy microwave regeneration.

Solution processable conjugated organic materials have gained tremendous interest motivated by their potential of low cost, lightweight and especially easy manufacturing of large-area and flexible electronics. Toxic halogen-containing solvents have been widely used in the processing of organic electronics, particularly organic photovoltaics (OPVs). To transition this technology to more commercially attractive manufacturing approaches, removing these halogenated solvents remains one of the key challenges. Our morphological (hard/soft X-ray scattering) and calorimetric characterizations reveal that using o-methylanisole, a certified food additive, as processing solvent can achieve similar crystalline properties and domain spacing/purity with that achieved by widely used binary halogenated solvents (chlorobenzene and 1,8-diiodooctane), thus yielding comparable photovoltaic performance in spin-casted films. To move a step forward, we further present the potential of o-methylanisole as processing solvent in th...

A difluorobenzoxadiazole building block is synthesized and utilized to construct a conjugated polymer leading to high-performance thick-film polymer solar cells with a V(OC) of 0.88 V and a power conversion efficiency of 9.4%. This new building block can be used in many possible polymer structures for various organic electro-nic applications.

Cycling LiCoO2 to above 4.5 V for higher capacity is enticing; however, hybrid O anion- and Co cation-redox (HACR) at high voltages facilitates intrinsic Oα - (α < 2) migration, causing oxygen loss, phase collapse, and electrolyte decomposition that severely degrade the battery cyclability. Hereby, commercial LiCoO2 particles are operando treated with selenium, a well-known anti-aging element to capture oxygen-radicals in the human body, showing an "anti-aging" effect in high-voltage battery cycling and successfully stopping the escape of oxygen from LiCoO2 even when the cathode is cycled to 4.62 V. Ab initio calculation and soft X-ray absorption spectroscopy analysis suggest that during deep charging, the precoated Se will initially substitute some mobile Oα - at the charged LiCoO2 surface, transplanting the pumped charges from Oα - and reducing it back to O2- to stabilize the oxygen lattice in prolonged cycling. As a result, the material retains 80% and 77% of its capacity after 450 and 550 cycles under 100 mA g-1 in 4.57 V pouch full-cells matched with a graphite anode and an ultralean electrolyte (2 g Ah-1 ).

© 2020 Wiley-VCH GmbH Li-rich metal oxide (LXMO) cathodes have attracted intense interest for rechargeable batteries because of their high capacity above 250 mAh g−1. However, the side effects of hybrid anion and cation redox (HACR) reactions, such as oxygen release and phase collapse that result from global oxygen migration (GOM), have prohibited the commercialization of LXMO. GOM not only destabilizes the oxygen sublattice in cycling, aggravating the well-known voltage fading, but also intensifies electrolyte decomposition and Mn dissolution, causing severe full-cell performance degradation. Herein, an artificial surface prereconstruction (ASR) for Li1.2Mn0.6Ni0.2O2 particles with a molten-molybdate leaching is conducted, which creates a crystal-dense anion-redox-free LiMn1.5Ni0.5O4 shell that completely encloses the LXMO lattice (ASR-LXMO). Differential electrochemical mass spectroscopy and soft X-ray absorption spectroscopy analyses demonstrate that GOM is shut down in cycling, which not only stabilizes HACR in ASR-LXMO, but also mitigates the electrolyte decomposition and Mn dissolution. ASR-LXMO displays greatly stabilized cycling performance as it retains 237.4 mAh g−1 with an average discharge voltage of 3.30 V after 200 cycles. More crucially, while the pristine LXMO cycling cannot survive 90 cycles in a pouch full-cell matched with a commercial graphite anode and lean (2 g A−1 h−1) electrolyte, ASR-LXMO shows high capacity retention of 76% after 125 cycles in full-cell cycling.

Poly (ethylene oxide) (PEO) polymer electrolytes are promising candidates for next-generation rechargeable lithium batteries. However, the poor interfacial stability between 4 V cathodes and PEO electrolytes impedes their applications in 4 V lithium batteries with high energy density. Here, we demonstrate a facile and effective strategy to enhance the interfacial stability by the synergy of Li1.5Al0.5Ge1.5(PO4)3 (LAGP) coating on the cathode surface, and salt combination in the electrolyte, even with a cut-off voltage of 4.25–4.4 V vs. Li+/Li. Nano-LAGP coated Li|PEO|LiCoO2 cell delivers stable cycling with a capacity retention of 81.9%/400 cycles and 84.7%/200 cycles at 60 °C when charged to 4.25 and 4.3 V in pure polyether electrolyte, respectively. Steady cycling is also demonstrated at room temperature and with LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode. This work offers a viable and scalable approach to improve the stability between PEO electrolytes and 4 V cathodes and open up new possibilities for practical application of 4 V lithium metal batteries.

Cs is a promoter of Cu-based catalysts for the synthesis of alcohols from CO2 hydrogenation. Scanning tunneling microscopy and ambient-pressure x-ray photoelectron spectroscopy were used to study the morphology and chemical properties of surfaces generated by the deposition of cesium on Cu2O/Cu(111) and Cu(111) substrates. CsOx nanostructures were formed after Cs metal was deposited on Cu2O/Cu(111) at 300 K. The formed CsOx protrude over the surface of copper oxide by 2-4 A, with the dimension at the base of the nanostructures being in the range of 1-3 nm. Heating to elevated temperature induced significant changes in the size and dispersion of the CsOx nanostructures, and there was a clear reconstruction of the copper oxide substrate, which then exhibited long range order with a hexagonally packed structure. The as-deposited and annealed surfaces of CsOx/Cu2O/Cu(111) were more reactive toward CO2 than plain Cu2O/Cu(111) or clean Cu(111). However, none of them were stable in the presence of H2, which fully reduced the copper oxide at 400-450 K. In CsOx/Cu(111), the CsOx nanoclusters were dispersed all over the metallic copper in no particular order. The CsOx species had an average width of 2 nm and ∼1 A height. The CsOx/Cu(111) systems exhibited the highest activity for the binding and dissociation of CO2, suggesting that the CsOx-copper interface plays a key role in alcohol synthesis.

Understanding the growth pathway of faceted alloy nanoparticles at the atomic level is crucial to morphology control and property tuning. Yet, it remains a challenge due to complexity of the growth process and technical limits of modern characterization tools. We report a combinational use of multiple cutting-edge in situ techniques to study the growth process of octahedral Pt3Ni nanoparticles, which reveal the particle growth and facet formation mechanisms. Our studies confirm the formation of octahedral Pt3Ni initiates from Pt nuclei generation, which is followed by continuous Pt reduction that simultaneously catalyzes Ni reduction, resulting in mixed alloy formation with moderate elemental segregation. Carbon monoxide molecules serve as a facet formation modulator and induce Ni segregation to the surface, which inhibits the (111) facet growth and causes the particle shape to evolve from a spherical cluster to an octahedron as the (001) facet continues to grow., Understanding the growth pathway of faceted alloy nanoparticles at the atomic level is crucial to morphology control and property tuning, but remains a challenge. Here, the authors reveal the particle growth and facet formation mechanisms of octahedral Pt3Ni nanoparticles using multiple cutting-edge in situ techniques.

Alternative electron acceptors are being actively explored in order to advance the development of bulk-heterojunction (BHJ) organic solar cells (OSCs). The indene-C-60 bisadduct (ICBA) has been regarded as a promising candidate, as it provides high open-circuit voltage in BHJ solar cells; however, the photovoltaic performance of such ICBA-based devices is often inferior when compared to cells with the omnipresent PCBM electron acceptor. Here, by pairing the high performance polymer (FTAZ) as the donor with either PCBM or ICBA as the acceptor, we explore the physical mechanism behind the reduced performance of the ICBA-based device. Time delayed collection field (TDCF) experiments reveal reduced, yet field-independent free charge generation in the FTAZ:ICBA system, explaining the overall lower photocurrent in its cells. Through the analysis of the photoluminescence, photogeneration, and electroluminescence, we find that the lower generation efficiency is neither caused by inefficient exciton splitting, nor do we find evidence for significant energy back-transfer from the CT state to singlet excitons. In fact, the increase in open circuit voltage when replacing PCBM by ICBA is entirely caused by the increase in the CT energy, related to the shift in the LUMO energy, while changes in the radiative and nonradiative recombination losses are nearly absent. On the other hand, space charge limited current (SCLC) and bias-assisted charge extraction (BACE) measurements consistently reveal a severely lower electron mobilitiy in the FTAZ:ICBA blend. Studies of the blends with resonant soft X-ray scattering (R-SoXS), grazing incident wide-angle X-ray scattering (GIWAXS), and scanning transmission X-ray microscopy (STXM) reveal very little differences in the mesoscopic morphology but significantly less nanoscale molecular ordering of the fullerene domains in the ICBA based blends, which we propose as the main cause for the lower generation efficiency and smaller electron mobility. Calculations of the JV curves with an analytical model, using measured values, show good agreement with the experimentally determined JV characteristics, proving that these devices suffer from slow carrier extraction, resulting in significant bimolecular recombination losses. Therefore, this study highlights the importance of high charge carrier mobility for newly synthesized acceptor materials, in addition to having suitable energy levels.

A regularly alternating terpolymer and a random terpolymer were synthesized from the constituent units of two donor-acceptor polymers with complementary absorption. They were then compared to a physical blend of these two donor-acceptor polymers in order to investigate the best means of extending the light absorption range in bulk heterojunction (BHJ) solar cells. While all three methods broadened the light absorption, the physical blend provided the best improvement in power conversion efficiency (4.10% vs 3.63% and 2.67% for the random and regular terpolymers, respectively). This is due to the increase in aggregation in the physical blend, as demonstrated in the UV-vis spectra, which likely leads to higher local mobility and less recombination. This study shows that in order to effectively increase the light absorption (and therefore performance) of a polymer:fullerene based BHJ solar cell, a terpolymer must retain a structure which allows sufficient aggregation.

The results of soft-x-ray O K α emission (XES) and O 1 s absorption spectroscopy (XAS) measurements of Pb-implanted glassy and crystalline silica are presented. The x-ray O K α (2 p → 1 s electron transition) emission spectra of SiO 2 were recorded before and after Pb-implantation with the energy of 30 keV and ion fluence 5 × 10 16 ion/cm 2 . It was found that XES O K α of implanted samples is sensitive to the disordering degree of the oxygen sublattice. The transformations and peculiarities of the spectra shape of implanted samples are explained by the disordering and amorphization effects in the structure of Pb-implanted SiO 2 . Comparing the XES O K α of reference a -SiO 2 , Pb-implanted SiO 2 and binary glassy PbO–SiO 2 system , it was established that the ion-beam treatment of oxide matrix does not generate an oxidized Pb as PbO 4 -type structural units. The energy band gap of 9.2 eV well coincides with previously reported data and was evaluated qualitatively with the help of overlaying the XES O K α and XAS O 1 s to the common energy scale for Pb-implanted SiO 2 and binary glassy PbO–SiO 2 .

We have shown that the electronic structure of graphene oxide is strongly, but reversibly, affected by temperature. Below 160 K, graphene oxide is much more completely oxidized, removing any last remaining π-conjugated network. Through DFT simulations, we have shown that this is due to buckling-induced oxidation. As temperature is reduced, the lightly oxidized, graphene-like zones attempt to expand due to a negative thermal expansion coefficient (TEC), but the heavily oxidized zones, with a TEC that is near zero, prevent this from happening. This contributes to localized buckling. The deformed regions oxidize much more readily, and the 1,2-epoxide groups form a new type of functional group never before seen: a triply bonded oxygen, bonded at the 1,3,5 sites of the hexagonal carbon rings. We have called this group TB-epoxide. Stable only under buckling, the TB-epoxide groups revert back to 1,2-epoxides once the lattice relaxes to a flatter profile. We have shown that one can alter the electronic structure of graphene oxide to induce temporary, but more complete, oxidation via strain. © 2015 American Chemical Society.

Mn + -implanted a -SiO 2 -samples were studied with the help of soft X-ray emission and absorption spectroscopy (Si L 2,3 3 d 3 s → 2 p 3/2,1/2 and Mn L 2,3 3 d 4 s → 2 p 3/2,1/2 emission transitions) using synchrotron excitation. The samples were obtained using a pulsed ion source (ion beam current density ∼2–7 mA/cm 2 , E impl. = 30 keV, ion fluence ∼2 × 10 17 cm −2 , pulse duration 400 μs) without thermal annealing. It was established that Mn-ion provides a formal valence state 2+, so arranging in implanted a -SiO 2 the low-sized MnO antiferromagnetic clusters probably of crystalline type. The data obtained well coincides with the electronic spin resonance results reported earlier.

Silica gel films prepared from mixtures of triethoxysilane (TH) and Fe nitrate Fe(NO)3·9H2O were irradiated with various fluences of 3 MeV Au ions. Silicon 2p x-ray absorption (XAS) and L2,3 x-ray emission spectra of irradiated TH:Fe films are found to be very similar to those of SiO2, providing direct evidence of the formation of a glassy matrix. Fe L2,3 XAS shows the reduction of Fe3+ ions at low fluence, initially attributed to the formation of Fe metallic nanoparticles. Mossbauer spectra of films irradiated with higher ion fluences are well fitted by a singlet associated with superparamagnetic Fe particles and a doublet associated with Fe2+ ions in Fe–Si–O complexes.