Search

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Cotton, one of the main commercial crops in the world, mostly distributes in several major growing regions, including Xinjiang of western China. An important renewable biomass resource, the cotton stalk has received most attention to serving as the poultry feed, paper making, environmental protection materials, and biomass briquette fuel. Particularly, the highly efficient recycling of cotton stalk can be widely expected to bring enormous economic and ecological benefits. However, most previous treatments are focused on pulverizing cotton stalks and returning to the field. A great challenge is still posed on the current pulling machines for cotton stalks, with emphasis on operational requirements, leakage, and breaking rate. In this study, a novel horizontal-roller cotton stalk pulling machine was proposed to efficiently implement the pulling of the whole cotton stalk after harvesting. The machine was mainly composed of traction, gearbox, stalk conveying, transmission system, machine body, road wheel, spacing regulating mechanism, stalk pulling, dam-board, and support frame. Specifically, the power input shaft of the gearbox was connected to the power output shaft of a tractor. In working, the power was transferred to the chain drive by the power output shaft of a gearbox, and then to realize the stalk conveying and pulling operation under the rotation of the toothed belt and the opposite rotation of the stalk pulling roller. A systematic kinematic analysis was conducted to determine the influencing factors in the working process. A field test was also carried out in a farmland in Korla City, Xinjiang Uygur Autonomous Region of China in October 2019. The soil firmness was 467 kPa, and the moisture content of the soil was 15%-20%, due to the perennial drought and little rain in the study area. The average height of cotton stalk was 700 mm, while, the plant spacing was 50 mm in a wide and narrow close planting mode. The power was from a CFD604A wheeled tractor with a calibrated power of 44.2 kW. The test was performed on the national standard of a harvester combine test(GB/T 8097-2008). A three-level quadratic regression orthogonal test was designed, where the forward velocity of the machine, the rod velocity of the deflector, and the speed of the stalk pulling roller were selected as the influencing factors, whereas, the leakage rate and plucking rate were the response factors. A response surface method was utilized to establish the regression equations for the relationship between the factors and assessment indexes. An optimal combination of parameters was obtained, while an experiment was also conducted to verify the mathematical model. The test results demonstrated that there were great effects of factors on the performance of horizontal-roller cotton stalk pulling. The significant effects on the leakage rate were ranked in a decreasing order: the forward velocity of the machine, the rod velocity of the deflector, and the speed of the stalk pulling roller. Correspondingly, the significant effects on the plucking rate were ranked in a decreasing order: the speed of the stalk pulling roller, the rod velocity of the deflector, and the forward velocity of the machine. The verification test indicated that the leakage rate of the cotton stalk was 5.24%, and the plucking rate was 3.75%,when the forward velocity of the machine was 0.68 m/s, the rod velocity of the deflector was 1.75 m/s, and the speed of the stalk pulling roller was 221 r/min. The optimal combination was better consistent with the predicted one in model optimization, indicating a reasonable structural design. The findings can provide a sound reference for the structural design and optimization of operation parameters in the horizontal-roller cotton stalk pulling machine. [ABSTRACT FROM AUTHOR]

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Grain loss rate is one of the most important performance index of corn head in mechanized harvesting. Seed harvesting is the main development direction of mechanized corn harvesting. The characters of seed harvesting corn variaty increased the urgency to reduce grain loss on corn head. The paper was proposed to solve the problem of grain loss on corn head. Theoretical analysis was conducted to the snapping process. Corn ear was subjected to pull force by the snapping rolls and the pull force transferred by corn stalk. Corn kernels were divided into 2 types due to their force condition. A kernel at the bottom end of corn ear was subjected to reaction forces by stripper plates, corn cob and the adjacent kernels and shear force by the pedicel. Kernels out of contact with the stripper plates were subjected to reaction forces by the adjacent kernels, pull force and shear force by corn cob. As the impact force was related to the impact time according to the theorem of impulse, the paper analyzed collision model between corn ear and stripper plates in the snapping process. A mathematical model was obtained about the impact time and intrinsic parameters of the system. The impact time was dependent on system mass, stiffness coefficient and damping coefficient, which lays on the mechanical structure and materials of collision objects. So, the impact force would decrease as the impact time could be prolonged by reducing the stiffness coefficient and raising the damping coefficient. The quantity of shed kernels could be reduced consequently. The paper proposed a corn head with wheel type rigid-flexible coupling snapping device to reduce loss. The corn head consisted of the frame, gear-box, snapping rolls, gathering chain, wheel type rigid-flexible coupling snapping device, and chain wheels. The wheel type rigid-flexible coupling snapping device consisted of snapping wheel axle, spring seat axle, supporting axle, buffer spring, and snapping wheel frame. Force analysis was conducted on the snapping wheel. According to the force conditions and dimension boundary condition, the structure diameters of snapping wheel, snapping wheel frame, and buffer spring were confirmed. In order to obtain the optimal parameters with the minimum loss rate of wheel type rigid-flexible coupling snapping device, the optimization experiments were conducted of the factors at 3 different levels. In the optimization experiments, the snapping wheel radius was designed at 10, 15 and 20 mm respectively, the flexible body thickness was at 2, 4 and 6 mm respectively, the snapping rolls rotating speed at 700, 800 and 900 r/min respectively. The Response Surface Analysis method was used to design the experiments. The software Design-Expert 8.0.6.1 was used to analyze the data. Regression equation was induced according to the experiment and analysis above. The optimal combination of wheel type coupling snapping device was as follows: The snapping rolls rotating speed was 700 r/min, the snapping wheel radius was 15 mm, the flexible body thickness was 4 mm. Verification contrast test was conducted between corn head with wheel type rigid-flexible coupling snapping device and the one with snapping rolls and stripper plates on corns at different moisture contents. As the kernels moisture contents were 21.8%, 16.7% and 13.4%, the grain loss rate decreased 53.4%, 48.6% and 47.0% respectively. This study provides not only theoretical basis but also design reference for the improvement of corn harvester design. [ABSTRACT FROM AUTHOR]

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The banana stalks are rich in fiber, and the existing returning machines for banana straw and stubble crushed in China have generated a few problems such as overly severe cutting resistance, the fiber of banana straw winding crushing blade roller on the returning machine, working on the unstable condition and serious fuel consumption. In order to deal with the above problems which the existing choppers met with in the working process, with the help of theoretical study and the analysis on the planting model for banana in Hainan Province, this paper put forward a returning method that the moving knives on the front knife roller were used to crush banana straws and the flail knives on the back knife roller were used to break stubble under the earth. The rotational direction of stubble crushing roller in the returning machine was same to the forward direction of the machine providing power, while the rotational direction of straw crushing roller was contrary to that of stubble crushing roller. On the basis of establishing theoretical model and the analysis on the planting model for banana in southern China, the key shaped parameters of the sliding-cutting blade and the structural parameters of crushing blade rollers were determined respectively. Besides, the sliding-cutting and anti-twining returning device for banana straw was put forward. The overall structure and working principle of sliding-cutting and anti-twining returning device were described. The performance of crushing banana straw and the power consumption were evaluated by simulating the breaking operation of banana straw in farmland through a bench test driven by double electric motors. The machine was composed of electrical motors, a tractor powered by electricity, the frame of machines, the straw crushing device and the stubble crushing device. Through Design-Expert software, a quadratic orthogonal rotating experiment was performed. Based on the variance analysis and regression fitting, a multiple regression equation was gained, presenting the effects of the working speed of the returning device, the rotating speed of rotating roller of moving knives and the rotating speed of rotating shaft of stubble breaking on the qualified rate of straw crushing and power consumption. It could be seen that the rotating speed of rotating roller of moving knives had the most influential effect, followed by the rotating speed of rotating shaft of stubble breaking, and the working speed of the returning device had the least influence on the qualified rate of straw chopping. The operation condition was optimized by applying the response surface method. The optimum factors for straw and stubble crushing process were as follows: The rotating speed of rotating roller of moving knives was 1 600 r/min, the rotating speed of rotating shaft of stubble breaking was 500 r/min, and the working speed of the returning device was 1.39 m/s. Based on the theoretical analysis, the higher qualified rate of straw crushing was achieved under the faster rotating speed of rotating roller of moving knives. The smaller power consummation was obtained under the lower rotating speed of rotating roller of moving knives and the lower rotating speed of rotating shaft of stubble breaking. Under the optimal condition, the corresponding qualified rate of straw crushing and power consumption were 95.2%, and 4.96 kW, respectively. The differences between the experimental and the analytical values of the qualified rate of straw chopping and power consumption were 0.31 percentage points and 0.27%, respectively, which indicated that the software analytical value was in great agreement with the experimental value. And by field test, qualified rate of straw crushing of machine proposed in this paper was higher by 1.94 percentage points and power consumption was lower by 11.3%, compared with vertical flail banana stalk crushing machine. Its successful implementation can greatly improve the production efficiency for crushing banana straw and stubble on one hand, and on the other hand prevent the pollution brought by deserted banana straw putridity. [ABSTRACT FROM AUTHOR]

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The soil-covering and press wheel are the main parts of the corn planter, and their performances are directly related to the growth and the output of the corn. The device with the functions of soil covering and soil compaction can improve the soil moisture content after planting and simplify the structure of machine. The squeeze-type coverer is a typical device with the functions of soil covering and soil compaction. But due to that the contact area is too small to bring the poor stability of soil-covering and soil-compacting during work process, the squeeze-type coverer is often used on no-till planter. A new type of soil-covering and soil-compacting device for corn planter was designed in this paper. The device was composed of 2 soil-covering-pressing wheels with cone-shaped structure, and realized the functions of soil-covering and soil-compacting depending on the extrusion force of soil produced by soil-covering-pressing wheel during planting. The main structure parameters of the soil-covering and soil-compacting device were determined through theoretical analysis and experiment of double-disk opener, which were mean diameter of 350 mm, width of the horizontal part of single soil-covering-pressing wheel of 20 mm, width of the inclined surface of single cover-press wheel of 70 mm, and the value range of horizontal interval of left and right soil-covering-pressing wheel of less than 29 mm. The leaning angle of soil-covering-pressing wheel was determined through theoretical analysis of soil-covering process based on the shape of soil furrows, which meant the leaning angle was about less than 20°. Based on the agronomic requirement of soil-compacting, the range of external load was about 609-790 N. Through analyzing, it was found that the external load, the horizontal interval between left and right soil-covering-pressing wheel and the leaning angle were the main influencing factors on the functions of soil-covering and soil-compacting of the device. Taking the 3 indices as the experimental factors using Design-Expert software, the Box-Benhnken experiments of 3 factors and 3 levels were conducted, and the results showed that the order of the influence of the factors on the soil compactness in the top 5 cm soil layer of the seed furrow from high to low was the external load, the horizontal interval between left and right soil-covering-pressing wheel and the leaning angle. The order of the influence of the factors on thickness of covering soil was the leaning angle, the load and the horizontal interval between left and right soil-covering-pressing wheel. The optimal parameter combination of the device was the external load of 900 N, the horizontal interval between left and right soil-covering-pressing wheel of 13 mm and the leaning angle of 16°. Verification testing indicated that the soil compactness in the top 5 cm soil layer of the seed furrow was (43.8±1.9) kPa, the coefficient of variation was 4.3%, and the thickness of covering soil was (32.9±2.3) mm with the coefficient of variation of 6.9%. The soil-covering and soil-compacting device designed in this paper has good performance of soil-covering, soil-compacting and working stability. This study can provide a reference for the design of planters. [ABSTRACT FROM AUTHOR]

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)