Search

Radio‐photoluminescence (RPL) materials display a distinct radiation‐induced permanent luminescence center, and therefore find application in the detection of ionizing radiation. The current inventory of RPL materials, which were discovered by serendipity, has been limited to a small number of metal‐ion‐doped inorganic materials. Here we document the RPL of a metal–organic framework (MOF) for the first time: X‐ray induced free radicals are accumulated on the organic linker and are subsequently stabilized in the conjugated fragment in the structure, while the metal center acts as the X‐ray attenuator. These radicals afford new emission features in both UV‐excited and X‐ray excited luminescence spectra, making it possible to establish linear relationships between the radiation dose and the normalized intensity of the new emission feature. The MOF‐based RPL materials exhibit advantages in terms of the dose detection range, reusability, emission stability, and energy threshold. Based on a comprehensive electronic structure and energy diagram study, the rational design and a substantial expansion of candidate RPL materials can be anticipated. [ABSTRACT FROM AUTHOR]

Scintillators are a unique class of luminescent materials with specific applications towards radiation detection. The emitters within state‐of‐the‐art scintillators are mostly limited to bismuth, cerium, europium, thallium, lead, tungsten, etc. A shared feature of these elements is the relatively high atomic number, which is responsible for high radiation stopping power and radiation‐induced luminescence. Searching for new scintillating materials is an essential target aiming at specific applications. In this Concept article, we will discuss our recent works on the topic of "uranyl‐bearing scintillators". As a virgin territory in this field, uranyl‐bearing scintillators show intrinsic merits for designing new materials with X‐ray detection capability, that is, the large photoelectric cross‐section, high X‐ray attenuation efficiency, and high crystal density. In addition, we also present challenges in the further development of the uranyl‐bearing scintillators. [ABSTRACT FROM AUTHOR]

When exposed to UV (365 nm, 2 mW) radiation, the bulk crystals of a two-dimensional metal–organic framework [Hphen]2[(UO2)2(ox)3] (1,phen = 1,10-phenanthroline, ox = oxalate) are exfoliated into thin sheets (2 μm) and its photoluminescence can be quenched in an incredibly sensitive manner, setting 1 as a superior UV-detection material. When upgrading the UV source into a 300 W xenon light source, the crystals of 1 can be further exfoliated into monolayer nanosheets (0.92 nm). [ABSTRACT FROM AUTHOR]

Summary of main observation and conclusion: We present a new method for generating europium oxalate compounds by decomposing of N‐methyl 2‐pyrrolidone in HNO3 media. The reaction exhibits high selectivity towards Eu3+ over UO22+, which suggests that these conditions could be applied to a selective crystallization based separation system for trivalent lanthanides and hexavalent actinides. In this work, a new method for the separation of trivalent Eu3+ and hexavalent UO22+ in initial high‐acidity HNO3 solution is presented. N‐Methyl 2‐pyrrolidone was added in the HNO3 solution where Eu3+ and UO22+ coexisted, then the solution was heated. Eu3+ will react with oxalic acid and dimethylamine produced by N‐methyl 2‐pyrrolidone and form compound NH2(CH3)2[Eu(C2O4)2(H2O)], while UO22+ remains in the solution. This method provide a new strategy for separation of trivalent Eu3+ and hexavalent UO22+. [ABSTRACT FROM AUTHOR]

Abstract: The combination of high atomic number and high oxidation state in UVI materials gives rise to both high X‐ray attenuation efficiency and intense green luminescence originating from ligand‐to‐metal charge transfer. These two features suggest that UVI materials might act as superior X‐ray scintillators, but this postulate has remained substantially untested. Now the first observation of intense X‐ray scintillation in a uranyl–organic framework (SCU‐9) that is observable by the naked eye is reported. Combining the advantage in minimizing the non‐radiative relaxation during the X‐ray excitation process over those of inorganic salts of uranium, SCU‐9 exhibits a very efficient X‐ray to green light luminescence conversion. The luminescence intensity shows an essentially linear correlation with the received X‐ray intensity, and is comparable with that of commercially available CsI:Tl. SCU‐9 possesses an improved X‐ray attenuation efficiency (E>20 keV) as well as enhanced radiation resistance and decreased hygroscopy compared to CsI:Tl. [ABSTRACT FROM AUTHOR]

Precise detection of low-dose X- and γ-radiations remains a challenge and is particularly important for studying biological effects under low-dose ionizing radiation, safety control in medical radiation treatment, survey of environmental radiation background, and monitoring cosmic radiations. We report here a photoluminescent uranium organic framework, whose photoluminescence intensity can be accurately correlated with the exposure dose of X- or γ-radiations. This allows for precise and instant detection of ionizing radiations down to the level of 10−4 Gy, representing a significant improvement on the detection limit of approximately two orders of magnitude, compared to other chemical dosimeters reported up to now. The electron paramagnetic resonance analysis suggests that with the exposure to radiations, the carbonyl double bonds break affording oxo-radicals that can be stabilized within the conjugated uranium oxalate-carboxylate sheet. This gives rise to a substantially enhanced equatorial bonding of the uranyl(VI) ions as elucidated by the single-crystal structure of the γ-ray irradiated material, and subsequently leads to a very effective photoluminescence quenching through phonon-assisted relaxation. The quenched sample can be easily recovered by heating, enabling recycled detection for multiple runs. [ABSTRACT FROM AUTHOR]

The limited long-term hydrolytic stability of rapidly emerging 3D-extended framework materials (MOFs, COFs, MOPs, etc.) is still one of major barriers for their practical applications as new solid-state electrolytes in fuel cells. To obtain hydrolytically stable materials, two H2PO4−-exchanged 3D inorganic cationic extended frameworks (CEFs) were successfully prepared by a facile anion-exchange method. Both anion-exchanged CEFs (YbO(OH)P and NDTBP) show significantly enhanced proton conductivity when compared with the original materials (YbO(OH)Cl and NDTB) with an increase of up to four orders-of-magnitude, reaching 2.36×10−3 and 1.96×10−2 S cm−1 at 98 % RH and 85 °C for YbO(OH)P and NDTBP, respectively. These values are comparable to the most efficient proton-conducting MOFs. In addition, these two anion-exchanged materials are stable in boiling water, which originates from the strong electrostatic interaction between the H2PO4− anion and the cationic host framework, showing a clear advance over all the acid-impregnated materials (H2SO4@MIL-101, H3PO4@MIL-101, and H3PO4@Tp-Azo) as practical solid-state fuel-cell electrolytes. This work offers a new general and efficient approach to functionalize 3D-extended frameworks through an anion-exchange process and achieves water-stability with ultra-high proton conductivity above 10−2 S cm−1. [ABSTRACT FROM AUTHOR]

Keywords: luminescence; radiation detection; scintillators; uranium As a new area in this field, uranyl-bearing scintillators show intrinsic merits for designing new materials with X-ray detection capability, that is, a large photoelectric cross-section, high X-ray attenuation efficiency, and high crystal density. Luminescence, radiation detection, scintillators, uranium. [Extracted from the article]

Lanthanides possess similar chemical properties rendering their separation from one another a challenge of fundamental chemical and global importance given their incorporation into many advanced technologies. New separation strategies combining green chemistry with low cost and high efficiency remain highly desirable. We demonstrate that the subtle bonding differences among trivalent lanthanides can be amplified during the crystallization of borates, providing chemical recognition of specific lanthanides that originates from Ln3+ coordination alterations, borate polymerization diversity and soft ligand coordination selectivity. Six distinct phases are obtained under identical reaction conditions across lanthanide series, further leading to an efficient and cost-effective separation strategy via selective crystallization. As proof of concept, Nd/Sm and Nd/Dy are used as binary models to demonstrate solid/aqueous and solid/solid separation processes. Controlling the reaction kinetics gives rise to enhanced separation efficiency of Nd/Sm system and a one-step quantitative separation of Nd/Dy with the aid of selective density-based flotation. [ABSTRACT FROM AUTHOR]