Search

ERAS guidelines recommend early removal of urinary drainage after colorectal surgery to reduce the risk of catheter-associated urinary tract infections (CAUTI). Another recommendation is the postoperative use of epidural analgesia (EA). In many types of surgery, EA was shown to increase the risk of postoperative urinary retention (POUR). This study determines the impact of early urinary catheter removal on the incidence of POUR and CAUTI under EA after colorectal surgery. Eligible patients were scheduled for colorectal surgery within the local ERAS protocol between April 2015 and September 2016. Urinary drainage was removed on the first postoperative day while EA was still in place (early removal group (ER)). The incidences of POUR and CAUTIs were recorded prospectively. Results were compared with a historical control (CG), which was operated between October 2013 and March 2015. POUR occurred significantly more often in the ER (ER 7.8%; CG 2.6%), while CAUTIs were significantly less frequent in the ER (13.8%) compared with the CG (30.4%). Patients who developed POUR were characterised by a significantly higher rate of abdominoperineal resections, by a higher frequency of rectal cancer, and a higher male-to-female ratio compared with patients who did not develop POUR. Early removal of urinary drainage after colorectal surgery while EA is still in place is feasible; it reduces the incidence of CAUTI but increases the risk of POUR. Thus, screening for POUR in patients with failure to void after six to 8 h is mandatory under these clinical conditions.

Biomaterials can cause a chronic local inflammation called foreign body reaction, with formation of foreign body giant cells (FBGC) by monocyte/macrophage fusion. However, FBGC appearance and role for biomaterials with different physicochemical properties are not yet fully understood. This study aimed at examining FBGC and inflammatory cells after intramuscular implantation of poly(l-lactide-co-d/l-lactide) (PLA) as membranes and uncoated electro-spun fiber meshes or meshes with a positively charged plasma-polymer coating into rats. After 7, 14 and 56 days, CD68+ and CD163+ macrophages, T lymphocytes, MHC-II+ cells, FBGC, and nestin-stained tissue area as regeneration marker were morphometrically analyzed. FBGC occurrence was primarily determined by material morphology, as their numbers for meshes were 10-fold higher during acute and 50-fold higher during chronic inflammation than for membranes but comparable between uncoated and coated meshes. CD68+ macrophages decreased around and within meshes, while CD163+ macrophages and MHC-II+ cells increased within meshes. T lymphocytes within meshes were higher for coated meshes, suggesting that the peri-implant tissue immunological response is also influenced by surface chemistry. FBGC were predominantly CD68+ and CD163- , and nestin-stained tissue area was negatively correlated with CD68+ monocytes/macrophages numbers and positively correlated with CD163+ macrophages numbers, highlighting differing roles in FBGC formation and tissue regeneration. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2726-2734, 2018.

Biomaterials should be bioactive in stimulating the surrounding tissue to accelerate the ingrowth of permanent implants. Chemical and topographical features of the biomaterial surface affect cell physiology at the interface. A frequently asked question is whether the chemistry or the topography dominates the cell-material interaction. Recently, we demonstrated that a plasma-chemical modification using allylamine as a precursor was able to boost not only cell attachment and cell migration, but also intracellular signaling in vital cells. This microwave plasma process generated a homogenous nanolayer with randomly distributed, positively charged amino groups. In contrast, the surface of the human osteoblast is negatively charged at −15 mV due to its hyaluronan coat. As a consequence, we assumed that positive charges at the material surface—provoking electrostatic interaction forces—are attractive for the first cell encounter. This plasma-chemical nanocoating can be used for several biomaterials in orthopedic and dental implantology like titanium, titanium alloys, calcium phosphate scaffolds, and polylactide fiber meshes produced by electrospinning. In this regard, we wanted to ascertain whether plasma polymerized allylamine (PPAAm) is also suitable for increasing the attractiveness of a ceramic surface for dental implants using Yttria-stabilized tetragonal zirconia.

Biomaterials can cause a chronic local inflammation called foreign body reaction, with formation of foreign body giant cells (FBGC) by monocyte/macrophage fusion. However, FBGC appearance and role for biomaterials with different physicochemical properties are not yet fully understood. This study aimed at examining FBGC and inflammatory cells after intramuscular implantation of poly(l-lactide-co-d/l-lactide) (PLA) as membranes and uncoated electro-spun fiber meshes or meshes with a positively charged plasma-polymer coating into rats. After 7, 14 and 56 days, CD68

Surface modification of Titanium (Ti) by low-temperature plasma influences cell-material interactions. Therefore, this study aimed at examining serum cytokine levels and associations after intramuscular implantation (n = 8 rats/group) of Ti-plates with Plasma Polymerized Allyl Amine (Ti-PPAAm), Plasma Polymerized Acrylic Acid (Ti-PPAAc), and without such layers (Ti-Controls). Pro-inflammatory (IL-2, IFNγ, IL-6) and anti-inflammatory (IL-4, IL-10, IL-13) cytokines were measured weekly for 56 days. Ti-PPAAm caused increased IL-2 (d7-14, d35), increased IFNγ (d35) and decreased IL-10 (d35, d49-56). Ti-PPAAc induced divergent anti-inflammatory cytokine changes with increased IL-4 (d28-56) and decreased IL-10 (d42-56). Ti-Controls elicited increased IL-2 (d42) and IFNγ (d35-42, d56). IL-6 was not detected and IL-13 only in three samples, thus they do not influence the response against these Ti implants. Correlation analysis revealed surface-dependent associations between cytokines indicating the involvement of different inflammatory cell populations. Concluding, different plasma modifications induce specific serum cytokine profiles and associations indicating distinct inflammatory responses.

Titanium (Ti) is an established biomaterial for bone replacement. However, facilitation of osteoblast attachment by surface modification with chemical groups could improve the implant performance. Therefore, this study aimed to evaluate the effect of a plasma polymerized allylamine (PPAAm) layer on the local inflammation in a rat model. Three series (RM76AB, RM78AB, RM77AB) of PPAAm-treated Ti plates were prepared using different plasma conditions. Twelve male LEW.1A rats received one plate of each series and one uncoated control plate implanted into the back musculature. After 7, 14 and 56 days, four rats were euthanized to remove the implants with surrounding tissue. Total monocytes/macrophages, tissue macrophages, T-cells and MHC-class-II-positive cells were morphometrically counted. On day 14, the macrophage/monocyte number was significantly higher for the controls than for the PPAAm samples. On day 56, the RM76AB and RM78AB samples had significantly lower numbers than RM77AB and the controls. The same was found for the tissue macrophages. No change over time and no differences between the implants were found for the T-cells. For the number of MHC-class-II-positive cells, a significant decrease was found only for the RM78AB implants between day 14 and day 56. Physico-chemical analysis of the PPAAm implants revealed that the RM77AB implants had the lowest water absorption, the highest nitrogen loss and the lowest oxygen uptake after sonication. These results demonstrate that the PPAAm samples and the controls were comparable regarding local inflammation, and that different plasma conditions lead to variations in the material properties which influence the tissue reaction.

Titanium surfaces were equipped with positively and negatively charged chemical functional groups by plasma polymerization. Their capability to influence the adhesion of human mesenchymal stem cells (hMSCs) and inflammation processes was investigated on titanium substrates, which are representative of real implant surfaces. For these purposes, titanium samples were coated with plasma polymers from allylamine (PPAAm) and acrylic acid (PPAAc). The process development was accompanied by physicochemical surface analysis using XPS, FT-IR and contact angle measurements. Very thin plasma polymer coatings were created, which are resistant to hydrolysis and delamination. Positively charged amino groups improve considerably the initial adhesion and spreading steps of hMSCs. PPAAm and PPAAc surfaces have an effect on the differentiation of hMSCs, e.g., the expression of osteogenic markers in dependence on culturing conditions. Acrylic acid groups appear to stimulate early mRNA differentiation markers (ALP, COL, Runx...

Calcium phosphate (CaP) preparations are established coatings for titanium-based medical implants used for bone reconstruction. However, biodegradation of the coating can result in microparticles that subsequently cause inflammatory reactions. The present study was therefore aimed at investigating the inflammatory response to two series of CaP-coated titanium plates: Ti-brushite (Ti-B) and Ti-hydroxyapatite (Ti-H) implants. Fifteen male LEW.1A rats received one plate of each series and a pellet (5 × 2 mm) of sol–gel derived silica/CaP (SCP implants) implanted into the back musculature. After 7, 14 and 28 days, five rats were killed and the implants were removed with the surrounding tissue. Quantitative immunohistochemistry was performed on frozen sections. Total monocytes/macrophages, tissue macrophages, T-cells, MHC-class-II-positive cells and proliferating cells were counted. For the Ti-B implants, the number of monocytes/macrophages remained constant while the other cell populations increased. In contrast, for the Ti-H implants the number of monocytes/macrophages decreased while the other cell populations remained constant. The SCP implants demonstrated degradation and scattering into smaller particles with an increase for all cell populations except the proliferating cells. Human mesenchymal stem cells demonstrated adherence and a flat morphology on Ti-B and Ti-H implants and no remarkable difference between both implants. Taken together, the in vivo data demonstrate that the short-term inflammatory response against a hydroxyapatite coating is lower in comparison to a brushite coating, and that the morphology of cells growing in vitro is similar on both layers.

The study was aimed at investigating the local tissue reactions through a histological examination of β-1-integrin expression and neointima formation, and humoral immune responses by detection of prosthesis-specific antibodies, after functional implantation of vascular prostheses. In three groups of pigs, the infrarenal aorta was replaced with segments of collagen-impregnated Dacron®-prostheses: M-prosthesis—medium primary porosity, double velour layer, crimping; C-prosthesis—low primary porosity, no velour, crimping; T-prosthesis—high primary porosity, no velour, no crimping. For each prosthesis type, one series with four animals was used for examining the tissue reactions, and a second series with eight animals was used to study the antibody response, both until 116 days postoperative. In the first three weeks, the M-prosthesis caused the highest tissue reactions and the highest antipolyester antibodies, but the lowest anticollagen antibodies, whereas the T-prosthesis caused the highest anticollagen antibodies, but the least tissue response and antipolyester antibodies in the early phase. On day 116, the C-prosthesis caused the highest tissue reactions and highest polyester-specific antibodies. These results indicate a possible association between local inflammatory reactions and humoral immune responses, influenced by properties of vascular grafts. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2008

The aim of this study was to examine the suitability of digital image analysis, using the KS400 software system, for the morphometric evaluation of the tissue response after prosthesis implantation in an animal model. Twenty-four female pigs aged 10 weeks were implanted with infrarenal Dacron® prostheses for 14, 21, 28, and 116 days. Following the explantation and investigation of the neointima region, the expression of beta-1-integrin, the proliferation rate by means of Ki-67 positive cells, and the intima thickness were evaluated as exemplary parameters of the tissue response after implantation. Frozen tissue sections were immunohistochemically stained and subsequently examined using computer-aided image analysis. A maximum expression of 32.9% was observed for beta-1-integrin 14 days after implantation, gradually declining over time to 9.8% after 116 days. The proliferation rate was found to be 19% on day 14, increasing to 39% on day 21 with a subsequent gradual decline to 5% after 116 days. The intima thickness increased from 189.9 μm on day 14 to 1228.0 μm on day 116. In conclusion, digital image analysis was found to be an efficient and reproducible method for the morphometric evaluation of a peri-prosthetic tissue response.

Several transgenic insect resistant maize varieties, commonly referred to as Bt-maize, express the gene for the Bacillus thuringiensis toxin Cry1Ab. As a method for the determination of Bt-maize, a sandwich-type ELISA for Cry1Ab was established. Monoclonal antibodies were developed by immunization of mice with trypsin-activated Cry1Ab. The secondary antibody was labeled with horseradish peroxidase, and 3,3',5,5'-tetramethylbenzidine (TMB) was used as chromogene. The detection limit was 0.4 ng ml m 1 of Cry1Ab. No (Cry1Ac, Cry1C, Cry2A, Cry3A) or only little (Cry9C) cross-reactivity with other Cry proteins was observed. Furthermore, the assay was applied to protein extracts from maize powder containing different amounts of Bt-maize from three different lines (Bt-176, Bt-11 and MON810). Using 100 mg maize per sample and Tris-borate buffer for rapid protein extraction, the minimum detectable mass fraction was 0.10% for Bt-11 and 0.23% for MON810. In contrast, Bt-176 maize could not be detected due to the fac...

Intima hyperplasia, resulting from extracellular matrix (ECM) secretion, can lead to vascular prosthesis occlusion and is a major problem in vascular surgery. Fibronectin might contribute to ongoing ECM secretion. However, the exact role of fibronectin and its influence on neointima formation remains unclear. This study was aimed at investigating the time course of the fibronectin area fraction and neointima formation following the functional implantation of three different polyester vascular prostheses into pigs. The infrarenal aorta from 15 animals (n = 5/group) was replaced by prosthesis segments with low, medium and high primary porosity. After 7, 14, 21, 28 and 116 days, the prostheses were morphometrically examined. Overall, the fibronectin area fraction was inversely correlated with the neointima thickness, demonstrating high fibronectin levels in the early phase (days 7 and 14) and low levels in the later phase with almost complete neointima formation (days 21-116). Throughout the study, fibronectin levels were highest at the proximal anastomosis region. The low porosity prosthesis had the highest fibronectin area fraction and a delayed neointima formation in the middle phase (days 21 and 28) but the highest neointima lining on day 116. The results indicate a relationship between fibronectin and neointima formation with the prosthesis porosity, demonstrating the importance of the textile design for tissue reactions following implantation.