Search

Combining stainless steel with zirconia components by powder technological shaping routes for manufacturing of multifunctional parts is an advantageous and promising one-step method making expensive and time-consuming additional joining steps redundant. However, several requirements for co-shaping and co-sintering of the very different compound partners have to be met. The microstructural and chemical constitution of the interface between both materials plays an important role for the mechanical properties, durability and corrosion resistance of the manufactured parts. In the present study, different shaping techniques for co-shaping of stainless steel and zirconia are introduced. The microstructure and the interphase properties of metal/ceramic hybrid parts have been investigated for samples made by tape casting, subsequent lamination and co-sintering. Nevertheless, the results of this study are valid for components made by other hybrid shaping processes as well. The interfaces were characterized by TEM, FESEM, EDX, and X-ray diffraction. Furthermore, the hydrothermal stability of the material compound was investigated.

Abstract The mechanical response of patterned graphene nanoribbons (GNRs) with a width less than 100 nm was studied in-situ using quantitative tensile testing in a transmission electron microscope (TEM). A high degree of crystallinity was confirmed for patterned nanoribbons before and after the in-situ experiment by selected area electron diffraction (SAED) patterns. However, the maximum local true strain of the nanoribbons was determined to be only about 3%. The simultaneously recorded low-loss electron energy loss spectrum (EELS) on the stretched nanoribbons did not reveal any bandgap opening. Density Functional Based Tight Binding (DFTB) simulation was conducted to predict a feasible bandgap opening as a function of width in GNRs at low strain. The bandgap of unstrained armchair graphene nanoribbons (AGNRs) vanished for a width of about 14.75 nm, and this critical width was reduced to 11.21 nm for a strain level of 2.2%. The measured low tensile failure strain may limit the practical capability of tuning the bandgap of patterned graphene nanostructures by strain engineering, and therefore, it should be considered in bandgap design for graphene-based electronic devices by strain engineering.

We present results of our investigations on nickel silicidation of top-down fabricated silicon nanowires (SiNWs). Control over the silicidation process is important for the application of SiNWs in reconfigurable field-effect transistors. Silicidation is performed using a rapid thermal annealing process on the SiNWs fabricated by electron beam lithography and inductively-coupled plasma etching. The effects of variations in crystallographic orientations of SiNWs and different NW designs on the silicidation process are studied. Scanning electron microscopy and transmission electron microscopy are performed to study Ni diffusion, silicide phases, and silicide−silicon interfaces. Control over the silicide phase is achieved together with atomically sharp silicide−silicon interfaces. We find that {111} interfaces are predominantly formed, which are energetically most favorable according to density functional theory calculations. However, control over the silicide length remains a challenge.