Search

A flexible formaldehyde sensor with high sensitivity was successfully fabricated by integrating palladium (Pd) nanoparticles, polyvinylpyrrolidone (PVP), multi-walled carbon nanotubes (MWCNTs) and nanocellulose (NC) into composite films. The flexible composite films were fabricated via vacuum filtration. The morphology, structure, composition, crystallinity, and functional group of as-fabricated sensing materials were characterized by scanning electron microscopy, transmission electron microscopy, electron probe microanalyzer, Raman spectroscopy, and Fourier transform infrared spectrometer. Pd nanoparticles-PVP-MWCNTs-NC (Pd-PVP-MWCNTs-NC) composite films exhibited an 11-fold increase in formaldehyde sensitivity compared to MWCNTs-NC composite films. The excellent sensing performances of Pd-PVP-MWCNTs-NC sensors were attributed to the combination of Pd nanoparticles and PVP. The enhanced sensitivity is attributed to the synergistic effect of the high electron transfer from formaldehyde molecule to Pd nanoparticles and swelling of PVP due to sorption of formaldehyde molecule. Pd-PVP-MWCNTs-NC sensors still maintained good response under bending angle up to 30° and 300 bending cycles. The results demonstrate that the Pd-PVP-MWCNTs-NC composite films are highly promising in terms of sensitivity and flexibility for sub-ppm level formaldehyde detection at room temperature. [ABSTRACT FROM AUTHOR]

We report an effective technique for the growth of graphene nanowalls (GNWs) and nitrogen-doped graphene nanowalls (N-GNWs) using a thermal chemical vapor deposition (TCVD) on the catalyst-free substrate. Ethanol and mixed ethanol-imidazole were used as carbon and carbon-nitrogen sources for the growth of GNWs and N-GNWs, respectively. The effect of imidazole concentration on the morphology, nanostructure, crystal structure, crystallinity, chemical bonding and chemical structure of GNWs and N-GNWs were investigated by scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction, Raman spectroscopy and X-ray photoelectron spectroscopy. Focused ion beam combined with TEM was utilized to analyze the growth mechanism. The results show that GNWs and N-GNWs are vertically oriented graphene nanosheets on in-plane-oriented graphitic layer/carbon nanolayer. An increase in imidazole concentration from 2.5 to 5.0 wt% increases the nitrogen content in the N-GNWs from 1.24 to 2.61 at%. The incorporated nitrogen atoms are mainly graphitic-N. One-step facile growth of N-GNWs by TCVD method without the need for a metal catalyst and plasma system was achieved. [ABSTRACT FROM AUTHOR]

In this study, we investigate molecularly imprinted polymers (MIPs), which form a three-dimensional image of the region at and around the active binding sites of pharmaceutically active insulin or are analogous to b cells bound to insulin. This approach was employed to create a welldefined structure within the nanospace cavities that make up functional monomers by cross-linking. The obtained MIPs exhibited a high adsorption capacity for the target insulin, which showed a significantly higher release of insulin in solution at pH 7.4 than at pH 1.2. In vivo studies on diabetic Wistar rats showed that the fast onset within 2 h is similar to subcutaneous injection with a maximum at 4 h, giving an engaged function responsible for the duration of glucose reduction for up to 24 h. These MIPs, prepared as nanosized material, may open a new horizon for oral insulin delivery.

Triboelectric nanogenerators (TENGs) have gained significant attention as promising energy-harvesting devices that convert mechanical energy into electrical energy through charge separation induced by friction and electrostatic induction. In this study, we explore the utilization of biowaste shrimp shell-extracted chitin nanofiber (ChNF) as a viable eco-friendly material for TENG applications. Composite materials were prepared by incorporating ChNF into natural rubber (NRL) at loading levels of 0.1 and 0.2 wt% (NRL/ChNF) to form the TENG triboelectric layer. ChNFs with a uniform width of approximately 10–20 nm were successfully extracted from the shrimp shells through a simple mechanical procedure. The NRL/ChNF composites exhibited enhanced mechanical properties, as evidenced by a higher Young's modulus (3.4 GPa) compared to pure NRL. Additionally, the NRL/ChNF composites demonstrated an increased dielectric constant of 3.3 at 0.1 MHz. Moreover, the surface potential difference of NRL increased from 0.182 V to 1.987 V in the NRL/ChNF composite. When employed as the triboelectric layer in TENG, the NRL/ChNF composites exhibited significant improvement in their output voltage, with it reaching 106.04 ± 2.3 V. This enhancement can be attributed to the increased dielectric constant of NRL/ChNF, leading to enhanced charge exchange and charge density. This study presents a straightforward and environmentally friendly technique for preparing sustainable natural materials suitable for energy-harvesting devices. [ABSTRACT FROM AUTHOR]

A highly sensitive and selective formaldehyde sensor was successfully fabricated using hybrid materials of nitrogen-doped double-walled carbon nanotubes (N-DWCNTs) and polyvinylpyrrolidone (PVP). Double-walled carbon nanotubes (DWCNTs) and N-DWCNTs were produced by high-vacuum chemical vapor deposition using ethanol and benzylamine, respectively. Purified DWCNTs and N-DWCNTs were dropped separately onto the sensing substrate. PVP was then dropped onto pre-dropped DWCNT and N-DWCNTs (hereafter referred to as PVP/DWCNTs and PVP/N-DWCNTs, respectively). As-fabricated sensors were used to find 1,2-dichloroethane, dichloromethane, formaldehyde and toluene vapors in parts per million (ppm) at room temperature for detection measurement. The sensor response of N-DWCNTs, PVP/DWCNTs and PVP/N-DWCNTs sensors show a high response to formaldehyde but a low response to 1,2-dichloroethane, dichloromethane and toluene. Remarkably, PVP/N-DWCNTs sensors respond sensitively and selectively towards formaldehyde vapor, which is 15 times higher than when using DWCNTs sensors. This improvement could be attributed to the synergistic effect of the polymer swelling and nitrogen-sites in the N-DWCNTs. The limit of detection (LOD) of PVP/N-DWCNTs was 15 ppm, which is 34-fold higher than when using DWCNTs with a LOD of 506 ppm. This study demonstrated the high sensitivity and selectivity for formaldehyde-sensing applications of high-performance PVP/N-DWCNTs hybrid materials. [ABSTRACT FROM AUTHOR]

Synthetic drugs used to treat hair loss cause many side-effects. Natural tea seed oil possesses many activities that can suppress hair loss. However, it is oily and sticky in direct application. In this study, tea seed oil loaded nanostructured lipid carriers (NLC) using Tween 80 (NLC-T), Varisoft 442 (NLC-V), and a combination of both surfactants (NLC-C) was developed. The obtained nanoformulations showed spherical particles in the size range 130–430 nm. Particle size and size distribution of NLC-C and NLC-T after storage at 4, 25, and 40 °C for 90 days were unchanged, indicating their excellent stability. The pH of NLC-T, NLC-V, and NLC-C throughout 90 days remained at 3, 4, and 3.7, respectively. NLC-C showed significantly greater nontoxicity and growth-stimulating effect on human follicle dermal papilla (HFDP) cells than the intact oil. NLC-T and NLC-V could not stimulate cell growth and showed high cytotoxicity. NLC-C showed melting point at 52 ± 0.02 °C and its entrapment efficiency was 96.26 ± 2.26%. The prepared hair serum containing NLC-C showed better spreading throughout the formulation than that containing the intact oil. Using 5% NLC-C showed a 78.8% reduction in firmness of the hair serum while enhancing diffusion efficiency by reducing shear forces up to 81.4%. In conclusion, the developed NLC-C of tea seed oil is an effective alternative in stimulating hair growth. Hair serum containing NLC-C obviously reduces sticky, oily, and greasy feeling after use. [ABSTRACT FROM AUTHOR]

Carbon nanotube/polydimethylsiloxane composite micropillar (CNT/PDMS MP) arrays were successfully fabricated using non-lithographic silicon nanowire (SiNW) arrays as a template for performance enhancement of triboelectric nanogenerators (TENG). The CNT/PDMS MP arrays were obtained by pouring CNT/PDMS composites on the SiNW arrays and peeled off. Surface topology of CNT/PDMS composites directly depends on morphology of SiNW arrays, which can be varied by the etching time of the typical metal-assisted chemical etching process. The micropatterned CNT/PDMS composites was mostly depicted to the SiNW array template pattern when the morphologies of the SiNW were optimized with a length of approximately 10 mm. Next, the CNT/PDMS MP arrays were utilized as a triboelectric layer of TENGs, generating the maximum output voltage of 22.84 ± 0.85 V, enabling an approximately 18-fold improvement in an electrical output compared to the flat PDMS-based TENG. The performance enhancement of TENGs based on CNT/PDMS MP arrays are attributed to synergic effects of (1) an enhancement of electrostatic induction by CNT composites, increasing dielectric constant, and (2) an enhancement of electrification by surface texturing using non-lithographic pattern and CNT composites. [ABSTRACT FROM AUTHOR]

Nanocarriers based on electrostatic Layer-by-layer (LbL) assembly of CaCO 3 nanoparticles (CaCO 3 NPs) was investigated. These inorganic nanoparticles was used as templates to construct nanocapsules made from films based on two oppositely charged polyelectrolytes, poly(diallyldimethylammonium chloride), and poly (sodium 4-styrene-sulfonate sodium salt), followed by core dissolution. The naked CaCO 3 NPs, CaCO 3 NPs coated with the polyelectrolytes and hollow nanocapsules were found with hexagonal shape with average sizes of 350–400 nm. A reversal of the surface charge between positive to negative zeta potential values was found, confirming the adsorption of polyelectrolytes. The loading efficiency and release of curcumin were controlled by the hydrophobic interactions between the drug and the polyelectrolyte matrix of the hollow nanocapsules. The quantity of curcumin released from hollow nanocapsules was found to increase under acidic environments, which is a desirable for anti-cancer drug delivery. The hollow nanocapsules were found to localize in the cytoplasm and nucleus compartment of Hela cancer cells after 24 h of incubation. Hollow nanocapsules were non-toxic to human fibroblast cells. Furthermore, curcumin loaded hollow nanocapsules exhibited higher in vitro cell inhibition against Hela cells than that of free curcumin, suggesting that polyelectrolyte based-hollow nanocapsules can be utilized as new carriers for drug delivery. [ABSTRACT FROM AUTHOR]