Search

Several methods have been proposed for estimating the actual tensile forces in metallic tie-rods inserted into the masonry arches and vaults of historic buildings. Static and dynamic methods based on the experimental measurement of the vertical displacements caused by concentrated loads, accelerations, and the fundamental frequencies and periods of free vibrations have been applied to arrive at a more precise evaluation of the axial tensile forces acting on the tie-rod under examination. Each of these methods, with its corresponding experimental procedure, presents different advantages and disadvantages with regard to operating procedures, equipment requirements, and accuracy range in the determination of tie-rod stress. In this paper the writers propose a simple method and experimental procedure based on a single static test. The reference structural system consists of a bending moment-resistant tie beam with unknown restraint conditions at its ends. Therefore, the proposed method does not require any as...

A soil-reinforcement load transfer model was developed by the authors1 to simulate the response of the reinforced soil material to triaxial compression and direct shearing. This paper presents the application of the proposed model for the numerical analysis of direct shear tests on sand samples reinforced with different types of tension resisting reinforcements. A parametric study is conducted to evaluate the effect of the mechanical characteristics and dilatancy properties of the soil, extensibility (elastic modulus) of the reinforcements, and their inclination with respect to the failure surface on the response of the reinforced soil material to direct shearing. An attempt is made to verify the proposed model by comparing numerical test simulations with experimental results reported by Jewell,2 and Gray and Ohashi.3 Comparisons of predicted and experimental results illustrate that the model can provide adequate simulations of the response of the reinforced soil material to shearing. In particular, it allows an evaluation of the effect of soil dilatancy (or contractancy), and extensibility of the reinforcement on tension forces generated in inclusions during shearing.