Search

The prediction of underwater noise emissions from impact pile driving during near-shore and offshore construction activities and its potential effect on the marine environment has been a major field of research for several years. A number of different modeling approaches have been suggested recently to predict the radiated sound pressure at different distances and depths from a driven pile. As there are no closed-form analytical solutions for this complex class of problems and for a lack of publicly available measurement data, the need for a benchmark case arises to compare the different approaches. Such a benchmark case was set up by the Institute of Modelling and Computation, Hamburg University of Technology (Hamburg, Germany) and the Organisation for Applied Scientific Research (TNO, The Hague, The Netherlands). Research groups from all over the world, who are involved in modeling sound emissions from offshore pile driving, were invited to contribute to the first so-called COMPILE (a portmanteau combining computation, comparison, and pile) workshop in Hamburg in June 2014. In this paper, the benchmark case is presented, alongside an overview of the seven models and the associated results contributed by the research groups from six different countries. The modeling results from the workshop are discussed, exhibiting a remarkable consistency in the provided levels out to several tens of kilometers. Additionally, possible future benchmark case extensions are proposed. [ABSTRACT FROM AUTHOR]

The measurement of acoustic pressure at a point in space using optical methods has been the subject of extensive research in airborne acoustics over the last four decades. The main driver is to reliably establish the acoustic pascal, thus allowing the calibration of microphones with standard and non-standard dimensions to be realized in an absolute and direct manner. However, the research work so far has mostly been limited to standing wave tubes. This Letter reports on the development of an optical system capable of measuring acoustic particle velocities in free-field conditions; agreement within less than 0.6 dB was obtained with standard microphone measurements during these initial experiments. [ABSTRACT FROM AUTHOR]

An absolute calibration method has been developed based on the method of three-transducer spherical-wave reciprocity for the calibration of hydrophones when immersed in sandy sediment. The method enables the determination of the magnitude of the free-field voltage receive sensitivity of the hydrophone. Adoption of a co-linear configuration allows the acoustic attenuation within the sediment to be eliminated from the sensitivity calculation. Example calibrations have been performed on two hydrophones inserted into sandy sediment over the frequency range from 10 to 200 kHz. In general, a reduction in sensitivity was observed, with average reductions over the frequency range tested of 3.2 and 3.6 dB with respect to the equivalent water-based calibrations for the two hydrophones tested. Repeated measurements were undertaken to assess the robustness of the method to both the influence of the sediment disturbance associated with the hydrophone insertion and the presence of the central hydrophone. A simple finite element model, developed for one of the hydrophone designs, shows good qualitative agreement with the observed differences from water-based calibrations. The method described in this paper will be of interest to all those undertaking acoustic measurements with hydrophones immersed in sediment where the absolute sensitivity is important. [ABSTRACT FROM AUTHOR]

A technique for the calibration of hydrophones using an optical method is presented. In the method, a measurement is made of the acoustic particle velocity in the field of a transducer by use of a thin plastic pellicle that is used to reflect the optical beam of a laser vibrometer, the pellicle being acoustically transparent at the frequency of interest. The hydrophone under test is then substituted for the pellicle, and the hydrophone response to the known acoustic field is measured. A commercially available laser vibrometer is used to undertake the calibrations, and results are presented over a frequency range from 10 to 600 kHz. A comparison is made with the method of three-transducer spherical-wave reciprocity, with agreement of better than 0.5 dB over the majority of the frequency range. The pellicle used is in the form of a narrow strip of thin Mylar©, and a discussion is given of the effect of the properties of the pellicle on the measurement results. The initial results presented here show that the method has the potential to form the basis of a primary standard method, with the calibration traceable to standards of length measurement through the wavelength of the laser light. [ABSTRACT FROM AUTHOR]